Social Media (2544)

2 Alpine S2-S68 6x8" Rear & Front Factory Speaker Replacement Kit Compatible Fit For 2004-2007 Mercury Monterey + Metra 72-5600 Speaker Harness Package Includes (2) Pair of ALPINE S2-S68 460 Watt 6x8" or 5x7" Coaxial 2-way Car Audio Speakers and a Metra 72-5600 Speaker Harness. Alpine S2-S68 6x8" or 5x7" 460W Peak (150W RMS) 6x8" S-Series 2-way 4-ohm Coaxial Car Speakers Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S68 6x8” Coaxial Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers, delivering more accurate, natural sound at an entry-level price.  General Features: 6" x 8" S Series 2-way Coaxial Car Speakers Peak Power Handling: 460 watts per pair / 230 watts each RMS Power Handling: 150 watts per pair / 75 watts each Hi-Res Audio certified Combined Polypropylene, Glass Fiber, and Mica cone material High-Amplitude Multi-Roll (HAMR) speaker surround 1" Cloth Dome tweeters 3.54" magnet and enhanced motor structure with 110% power handling Lightweight design with high output and low distortion Wide vehicle fitment range for easy installation Top-mount Depth: 2-3/8" Cutout Dimensions: 5 x 7-3/16  Impedance: 4 ohms Frequency Response: 75 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the Alpine S2-S68 Package: Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire (each has quick slides on one end and bare wire on the other) Eight 1-1/4" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice Sheet Template and specs on the box Alpine S2-S68 owner's manual Metra 72-5600 Speaker Adapter Harness FORD 98-Up Speaker Harness Sold as a Pair Compatible With:Chevrolet Camaro 2010-2015 Colorado (w/ 7" MyLink radio, RPO code: IOB) 2017 Colorado 2015-2017 Silverado 1500/2500/3500 (w/ 7" MyLink radio, RPO code: IOB) 2016-2017 Silverado 1500 2014-2017 Silverado 2500HD, 3500HD 2015-2017 Suburban 2015-2017 Tahoe 2015-2017 Ford Crown Victoria 1998-2011 Edge 2007-2010 Escape 2008-2012 Escape (w/ out sub) 2004-2007 Escape (seven-speaker system w sub) 2004-2007 Escape Hybrid 2004-2007 Escape 2001-2003 Excursion 2000-2005 Expedition 2007-2014 Expedition Non-NAV 2004-2006 Expedition with factory NAV 2004-2006 Expedition (late production) with factory NAV 2003 Expedition (late production) 2003 Expedition (early production) 2003 Expedition 1999-2002 Expedition (fleet) 2015 Expedition (SSV) 2015 Explorer 2005-2010 Explorer (Audiophile system w sub) 2004-2005 Explorer 2002-2003 Explorer Sport Trac 2001-2010 F-150 2004-2008 F-250/350/450/550 2017 F-250/350/450/550 (with 8.4-inch screen) 2013-2016 F-250/350/450/550 (without 8.4-inch screen) (with CD) 2013-2016 F-250/350/450/550 XL (without CD) 2013-2016 F-250/350/450/550 1999-2012 F-250 1998 F-650/750 (AM/FM/CD) 2016-2017 F-650/750 (AM/FM) 2016-2017 F-650/750 2000-2015 Focus (without MyFordTouch) 2012-2014 Focus 2000-2007 Focus (with Blaupunkt radio) 2003-2004 Freestar 2004-2007 Fusion 2006-2009 Mustang 2010-2014 Mustang (late 2008 build date) 2008-2009 Mustang (early 2008 build date) 2008 Mustang 2005-2007 Ranger 1998-2011 Taurus (without electronic controls) 2000-2007 Taurus (with electronic controls) 2000-2007 Thunderbird 2002-2005 Transit Connect 2010-2011 GMC Canyon (w/ 7" MyLink radio, RPO code: IOB) 2017 Canyon 2015-2017 Sierra 1500/2500/3500 (w/ 7" MyLink radio, RPO code: IOB) 2016-2017 Sierra 1500 2014-2017 Sierra 2500HD, 3500HD 2015-2017 Yukon / Yukon XL 2015-2016 Yukon Denali / Yukon XL Denali 2015-2016 Lincoln Aviator (with NAV) 2003-2005 Aviator (without NAV) 2003-2005 Mark LT 2005-2008 MKX (with NAV) 2007-2010 MKX (without NAV) 2007-2010 MKZ (with NAV) 2007-2009 MKZ (without NAV) 2007-2009 Navigator (with NAV) 2007-2014 Navigator (without NAV) 2003-2014 Navigator (with NAV) (w/ THX audio) 2003-2006 Navigator (with NAV) (w/o THX audio) 2003-2006 Navigator (early production) 2003 Navigator 1999-2002 Town Car (with NAV) 2003-2011 Town Car (without NAV) 2003-2011 Zephyr (with NAV) 2006 Zephyr (without NAV) 2006 Mazda B-Series Pickup 1998-2009 Mazda3 2004-2009 Tribute 2008-2011 Tribute 2001-2006 Mercury Grand Marquis 1998-2010 Marauder 2003-2004 Mariner 2005-2011 Monterey 2004-2007 Mountaineer 2006-2010 Mountaineer(Audiophile system w sub) 2004-2005 Mountaineer(system w/ out factory sub) 2004-2005 Mountaineer 2002-2003 Sable 2008-2009 Sable (no electronic controls) 2000-2006 Sable (electronic controls) 2000-2007 Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Absolute ABC17B 17' Digital Audio Coaxial Cable Gold Plated Connectors S/PDIF 2 RCA Male to RCA Male General Features: It is excellent for connecting digital audio components such as TVs, Blu-ray players, cable boxes, subwoofer speakers, receivers, etc. It is also used with S/PDIF, subwoofers, digital video, and Composite video. Copper clad center conductor, Dielectric insulation, aluminum braid, and dual shielding, for natural sounds. Low energy loss and maximum rejection of the hum/static from RF and EM interference. Corrosion-resistant gold-plated RCA connectors also provide a consistently tighter fit than commonly rolled cables with wider tolerances. A tough yet pliable PVC jacket ensures durability, easy routing, and quick installation. A split-tip center pin also ensures high contact pressure and conductivity. Blue RCA Cable Gold OFC RCA 2 Male to Male Spiral Shielded High-Performance series It can Also Be Used for Home Theater and entertainment, With Camcorders, DVDs, Home Subs, and Much More 2-year warranty. Includes adjustable & reusable Velcro cable strap for easy organization & storage. 2 channel double-shielded audio cable with turn-on wire Rubber-covered, molded connector housings 80% pure oxygen-free copper conductor Double-shielded with copper braiding 22 pF per foot capacitance 75-ohm impedance Blue Color 24K Gold plated RCA male connectors Spiral shielded cable Low noise Special Spiral braid for maximum noise rejection Oxygen-free strands ensure extended range and frequency response Cable ends are Gold Plated for best conductivity Highly flexible and blue-tinted outer jackets add a fantastic look and style to every installation. Precision-engineered to maximize performance. These Are Perfect for Hooking up Equalizers, Epicenters, Amps, TVs, etc... Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2) Alpine SWT-10S4 10" 1000W Shallow Slim Subwoofers+AudioControl The Epicenter Bass Processor 2 Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. An SWT-10S4 will work well in a ported or sealed box to get your favorite bass tone, boomy, or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you plan on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 4 ohms. General Features: 10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S4 package: SWT-10S4 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information Audio Control THE EPICENTER 2-Channel Concert Series Digital Bass Restoration Processor with Bass Remote Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave. Give your subwoofers the juice to go lower and hit harder.  The Epicenter uses a bass circuit to lower your subwoofers, grabbing every eye's attention on the boulevard. General Features: Active Epicenter Series 2 channel digital bass restoration and line output converter Designed to integrate with after-market or factory OEM systems Digital bass restoration restores bass roll-off in factory systems Speaker level inputs Bass/Gain level remote: Yes Signal-Sensing turn-on: Yes Preamp outputs: 1 pair Bass Maximizer circuitry Multiple turn-on options PFM Subsonic Filter bypass option Selectable impedance load: 20, 60, 20k ohms Frequency response: 10 - 100,000 Hz Subsonic filter: 20 Hz, 12/dB octave Signal-to-noise ratio: >130 dB Total harmonic distortion (THD): 0.003% Fuse Rating: 1A x 1  Dimensions: 8-1/16"W x 1-1/4"H x 6-3/4"H Weight: 1.70lbs Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the THE EPICENTER package: The Epicenter owner's manual Pre-amp Bass Restoration Processor black Remote dash mount control Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 4 ohms.  General Features: 10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S4 package: SWT-10S4 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 4 ohms. General Features: 10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S4 package: SWT-10S4 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2) Alpine SWT-10S4 10" 1000W Shallow Slim Subwoofers+AudioControl The Epicenter Bass Processor 2 Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy, or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you plan on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 4 ohms. General Features: 10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S4 package: SWT-10S4 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information Audio Control THE EPICENTER 2-Channel Concert Series Digital Bass Restoration Processor with Bass Remote Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave. Give your subwoofers the juice to go lower and hit harder.  The Epicenter uses a bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard. General Features: Active Epicenter Series 2 channel digital bass restoration and line output converter Designed to integrate with after-market or factory OEM systems Digital bass restoration restores bass roll-off in factory systems Speaker level inputs Bass/Gain level remote: Yes Signal-Sensing turn-on: Yes Preamp outputs: 1 pair Bass Maximizer circuitry Multiple turn-on options PFM Subsonic Filter bypass option Selectable impedance load: 20, 60, 20k ohms Frequency response: 10 - 100,000 Hz Subsonic filter: 20 Hz, 12/dB octave Signal-to-noise ratio: >130 dB Total harmonic distortion (THD): 0.003% Fuse Rating: 1A x 1  Dimensions: 8-1/16"W x 1-1/4"H x 6-3/4"H Weight: 1.70lbs Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the THE EPICENTER package: The Epicenter owner's manual Pre-amp Bass Restoration Processor black Remote dash mount control Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 4 ohms. General Features: 10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S4 package: SWT-10S4 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine SBT-S10V Truck Loaded SWT Enclosure 1000W Peak (350W RMS) Single 10" Loaded Ported Subwoofer Enclosure With a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications, with a design that works in small spaces. The Alpine logos on the front and the bottom offer convenient visibility options when mounted horizontally or vertically. Creates a symmetrical magnetic field with evenly distributed flux density to reduce distortion while improving power handling and output significantly. Provides the mechanical clearance needed for over 50mm of peak-to-peak excursion, unleashing massive output potential from a small package. The High-Amplitude Multi Roll Surround Design allows extreme excursions without sacrificing valuable cone area. FEA Optimized for linearity and made with injection-molded Santoprene ®, the HAMR surround is a key part of the suspension system that provides accurate, distortion-free control at extreme excursions. More Bass, Less SpaceWith a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications. Its design works in small spaces.Two-Way Alpine Logo FlexibilityThe Alpine logos on the front and the bottom offer convenient visibility options when mounted horizontally or vertically.Significant Output in a Compact Package with 4 Unique Alpine Subwoofer TechnologiesRadial Vented VC Heat Sink & Airflow Management SystemActively manages voice coil temperatures by forcing air directly across the heat sink system. FEA Optimized Dual-Sided Machined CRC Motor Structure Creates a symmetrical magnetic field with evenly distributed flux density to reduce distortion while improving power handling and output significantly. FEA Optimized Injection Molded TPE Spider with Pass-Through Gap Design Provides the mechanical clearance needed for over 50mm of peak-to-peak excursion, unleashing massive output potential from a small package Subwoofer Features: 10" SWT Series Single 2-ohm Shallow Mount Subwoofer Peak Power Handling: 1000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround, featuring H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding Frequency Response: 28 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty Enclosure Features: Ported angled / wedge-style truck enclosure 3/8" medium-density fiberboard (MDF) construction Automotive-grade dark grey carpet 8AWG Push Terminals Protective mesh subwoofer grilled included Dimensions: 7"D x 22"W x 16"H What's in the SBT-S10V package: Ported enclosure loaded with one 10" woofer 2 Mounting plates Six 1/2" Self-tapping screws Owner's manual (English/ French/ Spanish) Installation notes Warranty information Online product registration information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine SWT-10S2 1000W Peak 10" SWT Series Single 2-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S2 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S2 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 2 ohms. General Features: 10" SWT Series Single 2-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S2 package: SWT-10S2 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 4 ohms. General Features: 10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S4 package: SWT-10S4 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.