Rockford Fosgate Tweeters (28)

Rockford Fosgate Punch P1T-S 240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit The Punch P1T-S is a 1” PEI dome tweeter kit designed for natural sound reproduction rated at 60 Watts RMS. The kit includes high-pass crossovers, mounting hardware, and three bezels for flush, surface, and angle configurations. Car audio fanatics will love the Punch series tweeter kit. It features a 1" (25mm) PEI dome, cool-looking outboard crossover, and 3 mounting bezels to accommodate various installations. General Features: 1" Punch Series Tweeter Kit Power Handling: Peak: 240 watts per pair / 120 watts each RMS: 120 watts per pair / 60 watts each Recommended power range: 10 - 60 watts RMS per channel Butyl rubber surround PEI dome tweeter Recessed tweeter mount uses standard 1-3/4" hole saw DDC (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. This results in maximum ease of installation. Grilles and mounting hardware included High Pass: 3,500 Hz 12dB/octave Butterworth Sensitivity: 90dB Frequency Response: 3,500-22,000 Hz Mounting Depth: 1/2" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Rockford Fosgate Punch P1T-S owner's manual Two 1" tweeters (with attached 6" speaker wire terminated with female quick-slide connectors) 2 Crossovers 2 Front flush mount brackets 2 Rear flush mount brackets 2 Surface mounting housings 2 Trim rings Two M4x25mm Machine screws Two M4x10mm Machine screws Two M4x16mm Stud bolts Two 40" Lengths of speaker wire (each with male quick slides on one end and female quick slides on the other) Two 40" Lengths of speaker wire (each with female quick slides on one end and bare wire on the other) Four 7" Zip ties Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Rockford Fosgate Punch Pro PP4-NT Car Audio 100W Peak (50W RMS) 1.0" Single Punch Pro Series 4-Ohm High SPL Neodymium Tweeter Put crisp, clear highs that even the most discerning audiophiles would approve of in your vehicle with the Rockford Fosgate Punch Pro 1 Inch 4 Ohm Neodymium Tweeter.This high-efficiency horn tweeter features an aluminum diaphragm, phase plug, and frame, along with a high-temperature 1-inch voice coil. It boasts an RMS power of 50 watts with 4 ohms of nominal impedance, as well as a neodymium motor structure.General Features: 1" Punch Pro Series Car Tweeter Power Handling: Peak: 100 watts RMS: 50 watts Recommended power range: 10 - 50 watts RMS CEA-2031 compliant High-efficiency horn tweeter Aluminum diaphragm Aluminum phase plug High temp Nomex former voice coil Die-cast aluminum frame All metal input spring terminal connection Neodymium motor structure Built-in 6dB/Octave crossover Removable mounting flange Mounting hardware included PP4-X and PP8-X crossover compatible 4 ohms impedance Sensitivity: 105dB Frequency response: 4,000 - 20,000 Hz Crossover: 4,000 Hz @ 6dB/Octave Tweeter Depth: 2.57" Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate Punch Pro PP4-NT Car Audio 100W Peak (50W RMS) 1.0" Single Punch Pro Series 4-Ohm High SPL Neodymium Tweeter Put crisp, clear highs that even the most discerning audiophiles would approve of in your vehicle with the Rockford Fosgate Punch Pro 1 Inch 4 Ohm Neodymium Tweeter.This high-efficiency horn tweeter features an aluminum diaphragm, phase plug, and frame, along with a high-temperature 1-inch voice coil. It boasts an RMS power of 50 watts with 4 ohms of nominal impedance, as well as a neodymium motor structure.General Features: 1" Punch Pro Series Car Tweeter Power Handling: Peak: 100 watts RMS: 50 watts Recommended power range: 10 - 50 watts RMS CEA-2031 compliant High-efficiency horn tweeter Aluminum diaphragm Aluminum phase plug High temp Nomex former voice coil Die-cast aluminum frame All metal input spring terminal connection Neodymium motor structure Built-in 6dB/Octave crossover Removable mounting flange Mounting hardware included PP4-X and PP8-X crossover compatible 4 ohms impedance Sensitivity: 105dB Frequency response: 4,000 - 20,000 Hz Crossover: 4,000 Hz @ 6dB/Octave Tweeter Depth: 2.57" Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate PP4-T (4 PACK) 1.5" 400 Watt Heavy Duty Car Power Bullet Tweeters The PP4-T Punch Pro is a 1.5" tweeter with integral 6dB high Pass crossover engineered for high SPL (Sound Pressure Level) conditions. The oversized motor structure and high power diaphragm, combined with a billet machined aluminum phase plug create the foundation for a highly sensitive speaker that can handle plenty of power. You'll be proud, because these things are loud! Package includes mounting hardware. General Features: Aluminum diaphragm Billet stock machined aluminum phase plug High Temp Kapton Former Voice Coil Die Cast Aluminum Housing All Metal Input Spring Terminal Connection Mounting hardware included Built-in 6dB/Octave crossover Sold as individual units (not in pairs) 1 Year Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate Punch Pro PP4-NT Car Audio 100W Peak (50W RMS) 1.0" Single Punch Pro Series 4-Ohm High SPL Neodymium TweeterPut crisp, clear highs that even the most discerning audiophiles would approve of in your vehicle with the Rockford Fosgate Punch Pro 1 Inch 4 Ohm Neodymium Tweeter.This high-efficiency horn tweeter features an aluminum diaphragm, phase plug, and frame, along with a high-temperature 1-inch voice coil. It boasts an RMS power of 50 watts with 4 ohms of nominal impedance, as well as a neodymium motor structure.General Features: 1" Punch Pro Series Car Tweeter Power Handling: Peak: 100 watts RMS: 50 watts Recommended power range: 10 - 50 watts RMS CEA-2031 compliant High-efficiency horn tweeter Aluminum diaphragm Aluminum phase plug High temp Nomex former voice coil Die-cast aluminum frame All metal input spring terminal connection Neodymium motor structure Built-in 6dB/Octave crossover Removable mounting flange Mounting hardware included PP4-X and PP8-X crossover compatible 4 ohms impedance Sensitivity: 105dB Frequency response: 4,000 - 20,000 Hz Crossover: 4,000 Hz @ 6dB/Octave Tweeter Depth: 2.57" Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Rockford Fosgate Punch Pro PP4-T 1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil The Pro PP4-T is a 1.5” 4-Ohm tweeter engineered specifically for high SPL (Sound Pressure Level) conditions. It features 50 watt RMS power handing and includes mounting hardware. The PP4-T Punch Pro is a 1.5" tweeter with integral 6dB high Pass crossover engineered for high SPL (Sound Pressure Level) conditions. The oversized motor structure and high power diaphragm, combined with a billet machined aluminum phase plug create the foundation for a highly sensitive speaker that can handle plenty of power. You'll be proud because these things are loud! The package includes mounting hardware. General Features: Aluminum diaphragm Billet stock machined aluminum phase plug High Temp Kapton Former Voice Coil Die-Cast Aluminum Housing All Metal Input Spring Terminal Connection 1-1/2" Punch Series Car Tweeter Power Handling: Peak: 100 watts RMS: 50 watts Recommended power range: 15 - 50 watts RMS 4 ohms impedance, also available in 8 ohms Machined Aluminum bullet tweeter construction High-temperature voice coil Integrated 6dB high-pass crossover filter Flush mountable basket design CEA-2031 compliant tweeter Designed for high SPL systems Sensitivity: 105dB Frequency response: 4,000-20,000 Hz Top-mount depth: 2-5/8" Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the box: Rockford Fosgate PP4-T owner's manual One tweeter Four 1" Self-tapping Allen head screws 3mm Allen head bit Installation and Operation manual (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

2 Rockford Fosgate Punch Pro PP4-T 1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil The Pro PP4-T is a 1.5” 4-Ohm tweeter engineered specifically for high SPL (Sound Pressure Level) conditions. It features 50 watt RMS power handing and includes mounting hardware. The PP4-T Punch Pro is a 1.5" tweeter with integral 6dB high Pass crossover engineered for high SPL (Sound Pressure Level) conditions. The oversized motor structure and high power diaphragm, combined with a billet machined aluminum phase plug create the foundation for a highly sensitive speaker that can handle plenty of power. You'll be proud because these things are loud! The package includes mounting hardware. General Features: Aluminum diaphragm Billet stock machined aluminum phase plug High Temp Kapton Former Voice Coil Die-Cast Aluminum Housing All Metal Input Spring Terminal Connection 1-1/2" Punch Series Car Tweeter Power Handling: Peak: 100 watts RMS: 50 watts Recommended power range: 15 - 50 watts RMS 4 ohms impedance, also available in 8 ohms Machined Aluminum bullet tweeter construction High-temperature voice coil Integrated 6dB high-pass crossover filter Flush mountable basket design CEA-2031 compliant tweeter Designed for high SPL systems Sensitivity: 105dB Frequency response: 4,000-20,000 Hz Top-mount depth: 2-5/8" What's in the box: Rockford Fosgate PP4-T owner's manual One tweeter Four 1" Self-tapping Allen head screws 3mm Allen head bit ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate Punch Pro PP4-T 1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil The Pro PP4-T is a 1.5” 4-Ohm tweeter engineered specifically for high SPL (Sound Pressure Level) conditions. It features 50 watt RMS power handing and includes mounting hardware. The PP4-T Punch Pro is a 1.5" tweeter with integral 6dB high Pass crossover engineered for high SPL (Sound Pressure Level) conditions. The oversized motor structure and high power diaphragm, combined with a billet machined aluminum phase plug create the foundation for a highly sensitive speaker that can handle plenty of power. You'll be proud because these things are loud! The package includes mounting hardware. General Features: Aluminum diaphragm Billet stock machined aluminum phase plug High Temp Kapton Former Voice Coil Die-Cast Aluminum Housing All Metal Input Spring Terminal Connection 1-1/2" Punch Series Car Tweeter Power Handling: Peak: 100 watts RMS: 50 watts Recommended power range: 15 - 50 watts RMS 4 ohms impedance, also available in 8 ohms Machined Aluminum bullet tweeter construction High-temperature voice coil Integrated 6dB high-pass crossover filter Flush mountable basket design CEA-2031 compliant tweeter Designed for high SPL systems Sensitivity: 105dB Frequency response: 4,000-20,000 Hz Top-mount depth: 2-5/8" Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the box: Rockford Fosgate PP4-T owner's manual One tweeter Four 1" Self-tapping Allen head screws 3mm Allen head bit Installation and Operation manual (English/ French/ Spanish/ German/ Italian) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Rockford Fosgate Punch Pro PP4-T 1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil The Pro PP4-T is a 1.5” 4-Ohm tweeter engineered specifically for high SPL (Sound Pressure Level) conditions. It features 50 watt RMS power handing and includes mounting hardware. The PP4-T Punch Pro is a 1.5" tweeter with integral 6dB high Pass crossover engineered for high SPL (Sound Pressure Level) conditions. The oversized motor structure and high power diaphragm, combined with a billet machined aluminum phase plug create the foundation for a highly sensitive speaker that can handle plenty of power. You'll be proud because these things are loud! The package includes mounting hardware. General Features: Aluminum diaphragm Billet stock machined aluminum phase plug High Temp Kapton Former Voice Coil Die-Cast Aluminum Housing All Metal Input Spring Terminal Connection 1-1/2" Punch Series Car Tweeter Power Handling: Peak: 100 watts RMS: 50 watts Recommended power range: 15 - 50 watts RMS 4 ohms impedance, also available in 8 ohms Machined Aluminum bullet tweeter construction High-temperature voice coil Integrated 6dB high-pass crossover filter Flush mountable basket design CEA-2031 compliant tweeter Designed for high SPL systems Sensitivity: 105dB Frequency response: 4,000-20,000 Hz Top-mount depth: 2-5/8" Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the box: Rockford Fosgate PP4-T owner's manual One tweeter Four 1" Self-tapping Allen head screws 3mm Allen head bit ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

4 Rockford Fosgate Punch Pro PP4-T 1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil The Pro PP4-T is a 1.5” 4-Ohm tweeter engineered specifically for high SPL (Sound Pressure Level) conditions. It features 50 watt RMS power handing and includes mounting hardware. The PP4-T Punch Pro is a 1.5" tweeter with integral 6dB high Pass crossover engineered for high SPL (Sound Pressure Level) conditions. The oversized motor structure and high power diaphragm, combined with a billet machined aluminum phase plug create the foundation for a highly sensitive speaker that can handle plenty of power. You'll be proud because these things are loud! The package includes mounting hardware. General Features: Aluminum diaphragm Billet stock machined aluminum phase plug High Temp Kapton Former Voice Coil Die-Cast Aluminum Housing All Metal Input Spring Terminal Connection 1-1/2" Punch Series Car Tweeter Power Handling: Peak: 100 watts RMS: 50 watts Recommended power range: 15 - 50 watts RMS 4 ohms impedance, also available in 8 ohms Machined Aluminum bullet tweeter construction High-temperature voice coil Integrated 6dB high-pass crossover filter Flush mountable basket design CEA-2031 compliant tweeter Designed for high SPL systems Sensitivity: 105dB Frequency response: 4,000-20,000 Hz Top-mount depth: 2-5/8" Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the box: Rockford Fosgate PP4-T owner's manual One tweeter Four 1" Self-tapping Allen head screws 3mm Allen head bit ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Rockford Fosgate Punch Pro PP4-T 1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil The Pro PP4-T is a 1.5” 4-Ohm tweeter engineered specifically for high SPL (Sound Pressure Level) conditions. It features 50 watt RMS power handing and includes mounting hardware. The PP4-T Punch Pro is a 1.5" tweeter with integral 6dB high Pass crossover engineered for high SPL (Sound Pressure Level) conditions. The oversized motor structure and high power diaphragm, combined with a billet machined aluminum phase plug create the foundation for a highly sensitive speaker that can handle plenty of power. You'll be proud because these things are loud! The package includes mounting hardware. General Features: Aluminum diaphragm Billet stock machined aluminum phase plug High Temp Kapton Former Voice Coil Die-Cast Aluminum Housing All Metal Input Spring Terminal Connection 1-1/2" Punch Series Car Tweeter Power Handling: Peak: 100 watts RMS: 50 watts Recommended power range: 15 - 50 watts RMS 4 ohms impedance, also available in 8 ohms Machined Aluminum bullet tweeter construction High-temperature voice coil Integrated 6dB high-pass crossover filter Flush mountable basket design CEA-2031 compliant tweeter Designed for high SPL systems Sensitivity: 105dB Frequency response: 4,000-20,000 Hz Top-mount depth: 2-5/8" Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the box: Rockford Fosgate PP4-T owner's manual One tweeter Four 1" Self-tapping Allen head screws 3mm Allen head bit Installation and Operation manual (English/ French/ Spanish/ German/ Italian) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Rockford Fosgate Punch Pro PP4-T 1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil The Pro PP4-T is a 1.5” 4-Ohm tweeter engineered specifically for high SPL (Sound Pressure Level) conditions. It features 50 watt RMS power handing and includes mounting hardware. The PP4-T Punch Pro is a 1.5" tweeter with integral 6dB high Pass crossover engineered for high SPL (Sound Pressure Level) conditions. The oversized motor structure and high power diaphragm, combined with a billet machined aluminum phase plug create the foundation for a highly sensitive speaker that can handle plenty of power. You'll be proud because these things are loud! The package includes mounting hardware. General Features: Aluminum diaphragm Billet stock machined aluminum phase plug High Temp Kapton Former Voice Coil Die-Cast Aluminum Housing All Metal Input Spring Terminal Connection 1-1/2" Punch Series Car Tweeter Power Handling: Peak: 100 watts RMS: 50 watts Recommended power range: 15 - 50 watts RMS 4 ohms impedance, also available in 8 ohms Machined Aluminum bullet tweeter construction High-temperature voice coil Integrated 6dB high-pass crossover filter Flush mountable basket design CEA-2031 compliant tweeter Designed for high SPL systems Sensitivity: 105dB Frequency response: 4,000-20,000 Hz Top-mount depth: 2-5/8" Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the box: Rockford Fosgate PP4-T owner's manual One tweeter Four 1" Self-tapping Allen head screws 3mm Allen head bit ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca