Rockford Fosgate EQs & Processors (9)

Rockford Fosgate RFPEQU Universal Punch Equalization Control & Line Driver General Features: 2-channel universal Punch EQ Built-in line driver provides a bass boost to any aftermarket audio system High voltage line driver allows for up to 10 volts of RMS output Built-in Punch EQ2 equalizer Independent gain control Auto-Sense turn-on with remote out (high level in) 2-channel (left/right) high-level signal input 2 RCA (left/right) low-level output Low distortion and low noise operation Speaker level to RCA line level converter PEQ remote included Discreet surface mount technology Easily mounts behind the dash Operating Voltage: 9-16 VDC @ 200 mA Frequency Response: 20-20,000 Hz Input Impedance: 20,000 ohms Output Impedance: 500 ohms Input Voltage: 650mV-10V RMS Output Voltage: 10V RMS THD+N: .005% Signal to Noise Ratio: >100dB @ 2V (CEA) >110dB @ 10V (Max Output) EQ Frequency Controls: Up to +18dB @ 45 Hz Up to +12dB @ 12,500 Hz Fuse Size: 1 amp It is recommended to install as close to the source unit as possible Dimensions: 4.72"W x 3.15"D x 1.1"H Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the RFPEQU package: Rockford Fosgate RFPEQU owner's manual Rockford Punch EQ wired remote Hideaway universal PEQ module 16.5' remote cable with RJ-45 connectors on both ends 12" Power harness 12" Signal input harness LED with attached 8" power/ground harness Additional remote front panel Mounting bracket Installation instructions ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

  Rockford Fosgate DSR1 8-Channel Digital Signal Processor Rockford Fosgate DSR1 Digital signal processor with Maestro AR amp replacement module adds an aftermarket amp without losing important features. Upgrade your system Your car computer controls its audio system, so upgrading the sound has to include integrating it with your car's digital network. Rockford Fosgate's DSR1 combines an integration module with a full-featured digital signal processor so you can add an aftermarket amplifier without losing any of your factory controls or audio notifications and achieve the high-fidelity sound the system lacked. A simpler way In the past, in order to upgrade a factory system, you'd have first to sum all the outputs, reduce the signal strength to line level, remove the factory EQ and crossover settings, and then apply your custom audio processing and amplification. The DSR-1 simplifies this process by using the unprocessed line-level signals from the factory receiver, so you can tune the sound without fighting the factory settings. Your factory radio still works like it always has, and you retain all your vehicle's features. Rockford Fosgate + iDatalink Maestro = good times The DSR1 includes an iDatalink Maestro AR amplifier replacement module, which can use a vehicle-specific T-harness (sold separately) to supply a clean audio signal plus digital control data to the processor. Using a Windows PC, you go to iDatalink's website and download the firmware for your specific vehicle to your DSR1. It will then be able to translate your vehicle's digital instructions, like turning down the music and making only one speaker active during Bluetooth calls, for example. Fine-tune your sound via your mobile device The DSR1 uses the same technology as Rockford Fosgate's 3Sixty.3 digital signal processor to help you obtain and enjoy amazing sound quality from your vehicle's sound system. After connecting — via Bluetooth to an iOS or Android device — and loading the PerfectTune app, the main user interface screen displays your speaker configuration, an EQ graph, the EQ controls, and more. Eight channels handle almost any system Each channel has its own crossover network, level adjustment, time alignment setting, polarity switch, and 31 bands of equalization, so there's no excuse for anything but perfect sound. The DSR1 offers eight output channels of processed signal for your amplifiers to send on to your tweeters, speakers, and subs. Note: The DSR1 bypasses all factory amplification—compatible aftermarket amplifiers are required.Important Note: This Rockford Fosgate processor can either be used with an iDatalink harness in "Vehicle-specific" mode, or it can operate without needing a vehicle-specific harness in "Universal" mode when upgrading a standard, non-premium factory, or aftermarket system. See "Configuration Menu" under the Details tab for more information. General Features : digital signal processor with factory digital amplifier replacement module add an aftermarket amplifier without losing any factory controls or audio notifications requires Windows PC with an internet connection to download vehicle-specific firmware to the module includes iDatalink Maestro AR interface to retain factory premium audio features works with an optional vehicle-specific T-harness (sold separately) supplies control data as well as audio preamp and speaker-level inputs for use with a non-premium system and no vehicle-specific harness Digital Processing: digital processing technology from Rockford Fosgate's 3Sixty.3 processor digital processing: 147 MIPS speed, 32-bit precision, 72-bit accumulators analog to digital: 24-bit precision, 105 dB dynamic range, -98 dB THD+N digital to analog: 24-bit precision, 108 dB dynamic range, -98 dB THD+N settings and adjustments made via Bluetooth connection to an iOS or Android device running the PerfectTune app Eight assignable inputs Four auxiliary RCA and one optical TOSLINK (S/PDIF) inputs Eight preamp outputs (up to 4 volts) 31-band parametric EQ on all channels crossover filters can be set as all-pass, high-pass, low-pass, bandpass, high-shelf, or low-shelf filters selectable slopes and filter characteristics phase switch on every channel dimensions: 5-1/16"W x 1-1/4"H x 4"W warranty: 1 year Digital signal processor 7" micro USB-to-USB cable 18-pin input harness 16-pin output harness Quick-start guide ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

4 Rockford Fosgate PEQ Remote Wired Punch EQ for 2007+ Power & Punch Amps w/ Bass Knob This remote Punch EQ offers 0dB to +18dB boost @ 45Hz and/or a hinge treble boost 0dB to +12dB @ 12kHz. Cable and mounting hardware included. For use with select 2007 and newer PUNCH & POWER amplifiers. We are an Authorized Rockford Fosgate Dealer! General Features: Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Includes: remote knob, cable, mounting clip, and mounting screws Bass/Treble filtering based upon in-board amplifier crossover setting (HP-LP-AP) 8-pin connector Compatible Models: 2012-2014 Punch PBR300X2 Punch PBR500X1 2011-2014 Punch PBR300X1 Power T800-4ad Power T1000-4ad 2011-2012 Punch P1000X1D Punch P1000X5D 2010-2014 Power T500-1bdCP Power T1000-1bdCP Power T1500-1bdCP Power T2500-1bdCP 2010-2012 Punch P400-1 Punch P500-4 Punch P700-1bd 2009-2012 Punch P300-2 Punch P500-1bd 2009-2010½ Power T1000-4 2009 Power T1000-1bd Power T2500-1bd 2007-2014 Power T400-2 Power T400-4 Power T600-2 Power T600-4 2007-2012 Punch P200-2 Punch P300-1 Punch P400-2 Punch P400-4 Punch P500-2 Punch P1000-1bd 2007-2009 Power T500-1bd Power T1500-1bd ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

4 Rockford Fosgate PEQ Remote Wired Punch EQ for 2007+ Power & Punch Amps w/ Bass Knob This remote Punch EQ offers 0dB to +18dB boost @ 45Hz and/or a hinge treble boost 0dB to +12dB @ 12kHz. Cable and mounting hardware included. For use with select 2007 and newer PUNCH & POWER amplifiers. We are an Authorized Rockford Fosgate Dealer! General Features: Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Includes: remote knob, cable, mounting clip, and mounting screws Bass/Treble filtering based upon in-board amplifier crossover setting (HP-LP-AP) 8-pin connector Compatible Models: 2012-2014 Punch PBR300X2 Punch PBR500X1 2011-2014 Punch PBR300X1 Power T800-4ad Power T1000-4ad 2011-2012 Punch P1000X1D Punch P1000X5D 2010-2014 Power T500-1bdCP Power T1000-1bdCP Power T1500-1bdCP Power T2500-1bdCP 2010-2012 Punch P400-1 Punch P500-4 Punch P700-1bd 2009-2012 Punch P300-2 Punch P500-1bd 2009-2010½ Power T1000-4 2009 Power T1000-1bd Power T2500-1bd 2007-2014 Power T400-2 Power T400-4 Power T600-2 Power T600-4 2007-2012 Punch P200-2 Punch P300-1 Punch P400-2 Punch P400-4 Punch P500-2 Punch P1000-1bd 2007-2009 Power T500-1bd Power T1500-1bd ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate PEQ Remote Wired Punch EQ for 2007+ Power & Punch Amps w/ Bass Knob This remote Punch EQ offers 0dB to +18dB boost @ 45Hz and/or a hinge treble boost 0dB to +12dB @ 12kHz. Cable and mounting hardware included. For use with select 2007 and newer PUNCH & POWER amplifiers. We are an Authorized Rockford Fosgate Dealer! General Features: Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Includes: remote knob, cable, mounting clip, and mounting screws Bass/Treble filtering based upon in-board amplifier crossover setting (HP-LP-AP) 8-pin connector Compatible Models: 2012-2014 Punch PBR300X2 Punch PBR500X1 2011-2014 Punch PBR300X1 Power T800-4ad Power T1000-4ad 2011-2012 Punch P1000X1D Punch P1000X5D 2010-2014 Power T500-1bdCP Power T1000-1bdCP Power T1500-1bdCP Power T2500-1bdCP 2010-2012 Punch P400-1 Punch P500-4 Punch P700-1bd 2009-2012 Punch P300-2 Punch P500-1bd 2009-2010½ Power T1000-4 2009 Power T1000-1bd Power T2500-1bd 2007-2014 Power T400-2 Power T400-4 Power T600-2 Power T600-4 2007-2012 Punch P200-2 Punch P300-1 Punch P400-2 Punch P400-4 Punch P500-2 Punch P1000-1bd 2007-2009 Power T500-1bd Power T1500-1bd ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate PEQ Remote Wired Punch EQ for 2007+ Power & Punch Amps w/ Bass Knob This remote Punch EQ offers 0dB to +18dB boost @ 45Hz and/or a hinge treble boost 0dB to +12dB @ 12kHz. Cable and mounting hardware included. For use with select 2007 and newer PUNCH & POWER amplifiers. We are an Authorized Rockford Fosgate Dealer! General Features: Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Includes: remote knob, cable, mounting clip, and mounting screws Bass/Treble filtering based upon in-board amplifier crossover setting (HP-LP-AP) 8-pin connector Compatible Models: 2012-2014 Punch PBR300X2 Punch PBR500X1 2011-2014 Punch PBR300X1 Power T800-4ad Power T1000-4ad 2011-2012 Punch P1000X1D Punch P1000X5D 2010-2014 Power T500-1bdCP Power T1000-1bdCP Power T1500-1bdCP Power T2500-1bdCP 2010-2012 Punch P400-1 Punch P500-4 Punch P700-1bd 2009-2012 Punch P300-2 Punch P500-1bd 2009-2010½ Power T1000-4 2009 Power T1000-1bd Power T2500-1bd 2007-2014 Power T400-2 Power T400-4 Power T600-2 Power T600-4 2007-2012 Punch P200-2 Punch P300-1 Punch P400-2 Punch P400-4 Punch P500-2 Punch P1000-1bd 2007-2009 Power T500-1bd Power T1500-1bd ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate PEQ Remote Wired Punch EQ for 2007+ Power & Punch Amps w/ Bass Knob This remote Punch EQ offers 0dB to +18dB boost @ 45Hz and/or a hinge treble boost 0dB to +12dB @ 12kHz. Cable and mounting hardware included. For use with select 2007 and newer PUNCH & POWER amplifiers. We are an Authorized Rockford Fosgate Dealer! General Features: Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Includes: remote knob, cable, mounting clip, and mounting screws Bass/Treble filtering based upon in-board amplifier crossover setting (HP-LP-AP) 8-pin connector Compatible Models: 2012-2014 Punch PBR300X2 Punch PBR500X1 2011-2014 Punch PBR300X1 Power T800-4ad Power T1000-4ad 2011-2012 Punch P1000X1D Punch P1000X5D 2010-2014 Power T500-1bdCP Power T1000-1bdCP Power T1500-1bdCP Power T2500-1bdCP 2010-2012 Punch P400-1 Punch P500-4 Punch P700-1bd 2009-2012 Punch P300-2 Punch P500-1bd 2009-2010½ Power T1000-4 2009 Power T1000-1bd Power T2500-1bd 2007-2014 Power T400-2 Power T400-4 Power T600-2 Power T600-4 2007-2012 Punch P200-2 Punch P300-1 Punch P400-2 Punch P400-4 Punch P500-2 Punch P1000-1bd 2007-2009 Power T500-1bd Power T1500-1bd ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

2 Rockford Fosgate PEQ Remote Wired Punch EQ for 2007+ Power & Punch Amps w/ Bass Knob This remote Punch EQ offers 0dB to +18dB boost @ 45Hz and/or a hinge treble boost 0dB to +12dB @ 12kHz. Cable and mounting hardware included. For use with select 2007 and newer PUNCH & POWER amplifiers. General Features: Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Includes: remote knob, cable, mounting clip, and mounting screws Bass/Treble filtering based upon in-board amplifier crossover setting (HP-LP-AP) 8-pin connector Compatible Models: 2012-2014 Punch PBR300X2 Punch PBR500X1 2011-2014 Punch PBR300X1 Power T800-4ad Power T1000-4ad 2011-2012 Punch P1000X1D Punch P1000X5D 2010-2014 Power T500-1bdCP Power T1000-1bdCP Power T1500-1bdCP Power T2500-1bdCP 2010-2012 Punch P400-1 Punch P500-4 Punch P700-1bd 2009-2012 Punch P300-2 Punch P500-1bd 2009-2010½ Power T1000-4 2009 Power T1000-1bd Power T2500-1bd 2007-2014 Power T400-2 Power T400-4 Power T600-2 Power T600-4 2007-2012 Punch P200-2 Punch P300-1 Punch P400-2 Punch P400-4 Punch P500-2 Punch P1000-1bd 2007-2009 Power T500-1bd Power T1500-1bd ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

2 Rockford Fosgate PEQ Remote Wired Punch EQ for 2007+ Power & Punch Amps w/ Bass Knob This remote Punch EQ offers 0dB to +18dB boost @ 45Hz and/or a hinge treble boost 0dB to +12dB @ 12kHz. Cable and mounting hardware included. For use with select 2007 and newer PUNCH & POWER amplifiers. We are an Authorized Rockford Fosgate Dealer! General Features: Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Rockford Fosgate PEQ Remote Bass and Treble Knob Designed for 2007 and newer compatible amplifiers Remote wired bass and treble boost 0dB to +18dB bass boost @ 45Hz. 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz. Includes: remote knob, cable, mounting clip, and mounting screws Bass/Treble filtering based upon in-board amplifier crossover setting (HP-LP-AP) 8-pin connector Compatible Models: 2012-2014 Punch PBR300X2 Punch PBR500X1 2011-2014 Punch PBR300X1 Power T800-4ad Power T1000-4ad 2011-2012 Punch P1000X1D Punch P1000X5D 2010-2014 Power T500-1bdCP Power T1000-1bdCP Power T1500-1bdCP Power T2500-1bdCP 2010-2012 Punch P400-1 Punch P500-4 Punch P700-1bd 2009-2012 Punch P300-2 Punch P500-1bd 2009-2010½ Power T1000-4 2009 Power T1000-1bd Power T2500-1bd 2007-2014 Power T400-2 Power T400-4 Power T600-2 Power T600-4 2007-2012 Punch P200-2 Punch P300-1 Punch P400-2 Punch P400-4 Punch P500-2 Punch P1000-1bd 2007-2009 Power T500-1bd Power T1500-1bd ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca