Rockford Fosgate All Subwoofers (122)

2 Rockford Fosgate P3SD2-12 P3SD212 12" 1600W Shallow Mount Car Subwoofers Subs Rockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD2-12 shallow-mount 12" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3.65" deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 12" Punch Series Shallow-mount Subwoofer Power Handling: Peak: 800 watts  Power Handling: RMS: 400 watts Recommended power range: 200 - 400 watts RMS Impedance: Dual 2 ohm 2.5" Dual Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone M-Roll Santoprene surround Anodized aluminum cone and dust cap Dual linear spider with embedded 16 AWG tinsel leads Diamond cut cast aluminum trim ring Shallow Motor Assembly Tear and fatigue-resistant poly-cotton spider StampCast basket with integrated spider venting Dual 10 AWG compression speaker connections Optimized for both sealed and vented enclosures Top-mount depth: 3.65" Cutout diameter: 11.22" Frequency Response: 34 - 250 Hz Sensitivity: 85 dB Xmax: 8.4 mm Magnet weight: 1.45 oz Resonance Frequency (Fs): 34 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD2-12 package: Rockford Fosgate P3SD2-12 owner's manual One shallow-mount 12" Dual 2-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual

Rockford Fosgate P3SD2-12 P3SD212 12" 800W Shallow Mount Car Subwoofers Subs Rockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD4-12 shallow-mount 12" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3.65" deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 12" Punch Series Shallow-mount Subwoofer Power Handling: Peak: 800 watts  Power Handling: RMS: 400 watts Recommended power range: 200 - 400 watts RMS Impedance: Dual 2 ohm 2.5" Dual Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone M-Roll Santoprene surround Anodized aluminum cone and dust cap Dual linear spider with embedded 16 AWG tinsel leads Diamond cut cast aluminum trim ring Shallow Motor Assembly Tear and fatigue-resistant poly-cotton spider StampCast basket with integrated spider venting Dual 10 AWG compression speaker connections Optimized for both sealed and vented enclosures Top-mount depth: 3.65" Cutout diameter: 11.22" Frequency Response: 34 - 250 Hz Sensitivity: 85 dB Xmax: 8.4 mm Magnet weight: 1.45 oz Resonance Frequency (Fs): 34 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD2-12 package: Rockford Fosgate P3SD2-12 owner's manual One shallow-mount 12" Dual 2-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual

Rockford Fosgate P3SD4-12 P3SD412 12" 800W Shallow Mount Car Subwoofers Subs Rockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD4-12 shallow-mount 12" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3.65" deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 12" Punch Series Shallow-mount Subwoofer Power Handling: Peak: 800 watts  Power Handling: RMS: 400 watts Recommended power range: 200 - 400 watts RMS Impedance: Dual 4 ohm 2.5" Dual Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone M-Roll Santoprene surround Anodized aluminum cone and dust cap Dual linear spider with embedded 16 AWG tinsel leads Diamond cut cast aluminum trim ring Shallow Motor Assembly Tear and fatigue-resistant poly-cotton spider StampCast basket with integrated spider venting Dual 10 AWG compression speaker connections Optimized for both sealed and vented enclosures Top-mount depth: 3.65" Cutout diameter: 11.22" Frequency Response: 34 - 250 Hz Sensitivity: 85 dB Xmax: 8.4 mm Magnet weight: 1.45 oz Resonance Frequency (Fs): 34 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD4-12 package: Rockford Fosgate P3SD4-12 owner's manual One shallow-mount 12" Dual 4-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual

Rockford Fosgate P3SD4-12 P3SD412 12" 800W Shallow Mount Car Subwoofers Subs Rockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD4-12 shallow-mount 12" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3.65" deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 12" Punch Series Shallow-mount Subwoofer Power Handling: Peak: 800 watts  Power Handling: RMS: 400 watts Recommended power range: 200 - 400 watts RMS Impedance: Dual 4 ohm 2.5" Dual Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone M-Roll Santoprene surround Anodized aluminum cone and dust cap Dual linear spider with embedded 16 AWG tinsel leads Diamond cut cast aluminum trim ring Shallow Motor Assembly Tear and fatigue-resistant poly-cotton spider StampCast basket with integrated spider venting Dual 10 AWG compression speaker connections Optimized for both sealed and vented enclosures Top-mount depth: 3.65" Cutout diameter: 11.22" Frequency Response: 34 - 250 Hz Sensitivity: 85 dB Xmax: 8.4 mm Magnet weight: 1.45 oz Resonance Frequency (Fs): 34 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD4-12 package: Rockford Fosgate P3SD4-12 owner's manual One shallow-mount 12" Dual 4-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate P3SD4-12 P3SD412 12" 800W Shallow Mount Car Subwoofers SubsRockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD4-12 shallow-mount 12" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3.65" deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 12" Punch Series Shallow-mount Subwoofer Power Handling: Peak: 800 watts  Power Handling: RMS: 400 watts Recommended power range: 200 - 400 watts RMS Impedance: Dual 4 ohm 2.5" Dual Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone M-Roll Santoprene surround Anodized aluminum cone and dust cap Dual linear spider with embedded 16 AWG tinsel leads Diamond cut cast aluminum trim ring Shallow Motor Assembly Tear and fatigue-resistant poly-cotton spider StampCast basket with integrated spider venting Dual 10 AWG compression speaker connections Optimized for both sealed and vented enclosures Top-mount depth: 3.65" Cutout diameter: 11.22" Frequency Response: 34 - 250 Hz Sensitivity: 85 dB Xmax: 8.4 mm Magnet weight: 1.45 oz Resonance Frequency (Fs): 34 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD4-12 package: Rockford Fosgate P3SD4-12 owner's manual One shallow-mount 12" Dual 4-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

Rockford Fosgate Punch P3D4-12 1200W Max, 600W RMS 12" Punch P3 Series Dual 4-Ohm Car Subwoofer The P3D4-12 is Rockford Fosgate's best-performing Punch series subwoofer for cars and trucks. The P3 12-inch subwoofers now feature anodized aluminum cones and dust caps along with unique spider venting to keep the motor cooler than previous versions. These feature VAST technology to increase surface cone area up to 25% and a Flex Fit basket for extreme car and truck installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. General Features: 12" Punch P3 Series Dual 4 Ohm Subwoofer Power Handling: Peak: 1200 watts per sub Power Handling: RMS: 600 watts per sub Impedance: 4 ohms Anodized aluminum heat sinking cone & dust cap for strength and durability Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area Dual tear & fatigue resistant linear poly-cotton spiders Optimized motor magnetics with extended pole and bumped backplate Fatigue-resistant and reduced-strain stitched tinsel leads Multi-point high temp/strength neck joint bonding technique Sturdy 16-gauge compound bend frame geometry Semi-Flexible PVC removable protective motor cover Custom insulated compression input terminal assembly Proprietary spider venting/cooling technique Decorative die-cast trim ring Custom 10-AWG nickel-plated push terminals High-temperature 4-layer 2-1/2" voice coil with spun laced Nomex insulating reinforcement collar 102 oz Double stacked ferrite magnet structure Frequency response: 27.7-250 Hz Sensitivity: 85 dB Xmax: 16.2 mm Mounting Depth: 6-11/16" Cutout Diameter: 11-1/4" Authorized Internet Dealer What's in the P3D4-12 package: One 12" Dual 4-ohm voice coil subwoofer Trim ring Twelve 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual (English/ French/ Spanish/ German) Rockford Fosgate P3D4-12 owner's manual ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

Rockford Fosgate Punch P3D4-10 P3 Series DVC 4-Ohm 10-Inch 500-Watt RMS 1000 Watts Peak Subwoofer + 10" Mesh Grille The Rockford Fosgate P3D4-10 is the best-performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones and dust caps along with unique spider venting to keep the motor cooler than previous versions. These subs feature VAST technology to increase surface cone area to 25% and a Flex Fit basket for extreme installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. 10" Punch P3 Series Dual 4 Ohm Subwoofer General Feature: 10" Punch P3 Series Dual 4 Ohm Subwoofer Power Handling: Peak: 1,000 watts Power Handling: RMS: 500 watts Impedance: 4 ohm Anodized aluminum heat sinking cone & dust cap for strength and durability Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area Dual tear & fatigue resistant linear poly cotton spiders Optimized motor magnetics with extended pole and bumped backplate Fatigue-resistant and reduced-strain stitched tinsel leads Multipoint high temp/strength neck joint bonding technique Sturdy 16-gauge compound bend frame geometry Semi-Flexible PVC removable protective motor cover Custom insulated compression input terminal assembly Proprietary spider venting/cooling technique Decorative die-cast trim ring Custom 10-AWG nickel-plated push terminals High-temperature 4-layer 2-1/2" voice coil with spun-laced Nomex insulating reinforcement collar Double-stacked ferrite magnet structure Frequency response: 28-250 Hz Sensitivity: 82 dB Xmax: 13.9 mm Mounting Depth: 6-1/4" Cutout Diameter: 9-1/8" Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Matching Amplifiers: (one subwoofer) Rockford Fosgate R750-1D, Parallel @2ohms Rockford Fosgate P1000X1bd, Parallel @2ohms Rockford Fosgate R500X1D, Parallel @2ohms Matching Amplifier: (two subwoofers) Rockford Fosgate P1000X1bd, Parallel @1ohm Rockford Fosgate R1200-1D, Parallel @1ohm Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

2 Rockford Fosgate Prime R2D2-10 500W Max 250W RMS 10" Dual 2-Ohm R2 Prime Series Subwoofer Rockford Fosgate Prime R2 10” subwoofers provide high-performance bass at an unbelievable value. This model features a laser-etched curvilinear dust cap to dissipate heat generated by the high‐temp copper voice coil, as well as a solid stamped steel frame with integrated frame-mounted compression terminals. Best of all, they are optimized for both sealed and vented enclosures. Car Audio Fanatics who want Rockford Fosgate quality can rely on the Prime Series 10" subwoofers to get the job done, and the Dual Voice Coil provides awesome installation flexibility. These drivers can pump out the bass due to their mica-injected polypropylene cone, and their stamp-cast baskets with spider venting - typically reserved for more expensive models - keep the motor running cool! These R2 subwoofers are optimized for sealed and vented enclosures. General Features: 10" Dual 2-Ohm Prime Series Subwoofer 250 Watts RMS Power Handling 400 Watts Max Power Handling Recommended power range: 175 - 300 watts RMS CEA-2031 compliant Verified with Klippel speaker certification 12 AWG compression terminals Fiber-reinforced painted paper-pulp woofer cone High temperature 2" voice coil Laser-etched aluminum dust cap High-durability compressed foam surround Proprietary powder-coated stamped steel frame with spider cavity venting Fatigue-resistant poly-cotton spider with integral woven leads High-temperature copper voice coil with aluminum former 12 AWG compression terminals Anodized aluminum voice coil former Optimized for both sealed and vented enclosures Mica-injected polypropylene cone Linear spider with embedded 16 AWG tinsel leads StampCast basket with integrated spider venting Integrated ABS decorative trim ring Mounting Depth: 4.319" Cutout Diameter: 9.125" Magnet Weight: 43oz Frequency Response: 45 - 250 Hz Xmax: 6.5mm Sensitivity: 87 dB @ 1 watt / 1 meter Optimized for sealed enclosures Recommended Sealed Enclosure: 0.50 - 0.85ft³ Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate P2D4-12 12" 1600W Car Audio Subwoofer Rockford Fosgate has always been known as "The PUNCH," and the P2 12" subwoofer continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available. General Features: 12" Dual 4 ohm Punch Stage 2 Subwoofer Power Handling: RMS: 400 watts Power Handling: Peak: 800 watts Recommended power range: 300 - 500 watts RMS Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST; Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Mounting Depth: 6.40" Cutout Diameter: 11.22" Magnet Weight: 72.80 oz Frequency Response: 27.2 - 250 Hz Xmax: 13.3mm Sensitivity: 86 dB @ 1 watt / 1 meter Weight: 16 Ibs 1-year Manufacturer's Warranty Authorized Internet Dealer What is in the P2D4-12 package: P2D4-12 owner's manual Two 12" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

2 Rockford Fosgate Punch P2D2-15 800w 15" Dual 2-Ohm Car Audio Subwoofers Subs Rockford Fosgate has always been known as "The PUNCH" and the P2 15" subwoofer certainly continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available. General Features: 15" Dual 2 ohm Punch Stage 2 Subwoofer Power Handling: 150 - 400 watts RMS (800 watts peak power) CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST; Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Mounting Depth: 7.34" Cutout Diameter: 13.9" Magnet Weight: 72.80 oz Frequency Response: 20 - 250 Hz Xmax: 13.3mm Sensitivity: 86 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 2.66 cubic feet Recommended Sealed Enclosure: .70-1.58 cubic feet Authorized Internet Dealer 1-year Manufacturer's Warranty Weight: 20 Ibs What's in the P2D2-15 package: One 15" Dual 2-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual P2D2-15 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.