Pro Audio & DJ Equipment (1987)

16 MR Truss CL33 Universal Multi-Purpose C Clamp Hooks Stage Mounting Lighting Truss Mounts The CL33 is a clamp that will allow you to mount your lights onto any truss 1.5" to 2" General Features: Metal Light Duty C-Clamp handles any light up to 44 pounds Best quality clamps on the market ideal clamp for many rigging applications Hand tighten for secure installation with an easy-to-operate large knob It is perfect for mobile DJs, light riggers, or theater stagehands Load capacity: 44 lbs (20 kg) Fits: 1in to 2in truss Size: 6 Inches Weight: 0.5 lbs (0.3kg) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

MR DJ DXO300 PRO PA DJ Club Stereo 2/3 Way Plus Subwoofer Crossover with XLR Input & Output MR DJ DXO300 is the perfect addition to any sound reinforcement system. Designed for live sound and fixed-install applications. The DXO300 is an audio crossover. Audio crossovers are a class of electronic filters used in audio applications. Most individual loudspeaker drivers cannot cover the entire audio spectrum from low frequencies (think subwoofers) to high frequencies (think tweeters) with sufficient relative volume and lack of distortion. The inputs and outputs are both balanced XLR and 1/4" jacks. Connect your sound source to the XO3 input and output to your amplifiers to power your speakers. The controls will allow you to split your bands and send the low frequencies to your subwoofer speakers, mid-range frequencies to the horn drivers and mid-range speaker boxes, and the high frequencies to your tweeters. Properly channeling the correct frequency to the right speakers is the proper way of designing sound and speaker fields. General Features: Professional 3-Way Stereo Crossover + Subwoofer 2-way Stereo / 3-way Mono rack mountable crossover Subwoofer Output Unbalanced XLR 1/4" input jacks Balanced XLR outputs Switchable from 110V-220V Input Impedance: 100k Ohms Output Impedance: 220 Ohms Frequency Response: 25-25,000 Hz Signal-to-Noise Ratio: 80dB Crossover Range: Subwoofer: 50-250 Hz Low/High: 70-1000 Hz Mid/High: 480-7000 Hz Weight: 4.4 lbs Dimensions: 5-3/4"D x 19"W x 1-3/4"H Authorized Internet Dealer 1-year Manufacturer's warranty Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 MR DJ LS-100 Pro DJ Lighting Tripod & T-Bar Portable Light Stand Bundle The MR DJ 9 Ft Lighting Tripod T-Bar Light Stand Cross Bar is a low-cost tripod perfect for hanging par cans. It is also great for using a lighting fixture to create Quality lighting effects. The tripod is easily collapsible for transport and easy to install. It includes an FS adapter designed to mount one light at a time at the top of the stand. It is the ideal solution for DJs, mobile entertainers, or small venues needing easy setup and takedown for their lighting. General Features: DJ Lighting Tripod T-Bar Light Fixture Stand Easy setup and teardown, ideal for mobile entertainers Adjustable Height Range from 4 to 9 Feet Maximum Loaded Weight 44 LBS T-Bar Total length Across 40 Inches (4) Mounting Point Bolts with Wing Nuts Constructed from Strong Tubular Steel Hand Twist Knobs for Locking Feet & Pole Position Compact Fold-Up Design Easy to Transport Distance between light fixture bolts - 12.5" Easy to install and move. Can adjust from 48" to 127.95" Made of high-quality iron material, it is durable and reliable for long-term use Heavy-duty stand that folds easily and conveniently Size : (Stand Height): 9 ft (2.7 m) fully extended Bar Diameter: 0.86 in (22 mm) 4 optional mounting points complete with hardware Quick and easy setup for time-sensitive events Color: Black Material: Iron Adjustable Height: 4.7 to 10 Feet Weight: 6.5kg / 14.33 lbs Weight Capacity: 50kg / 110 lbs Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Mackie SRM450v3 1000W 12-inch Powered Speaker Mackie's gone the extra mile for you with the SRM450v3 active speaker. The newest generation of SRM speakers gives you 1000 watts packed into Mackie's rugged, lightweight molded enclosure and powerful digital audio processing. An on-board mixer, one-button tone shaping, feedback elimination, and thru-put signal routing options make the SRM450v3 the most powerful component of your rig, but it stays convenient and easy to use. Lighten your load-in, update your PA, and let the speaker do some work; add a Mackie SRM450v3 active speaker to your rig! General Features: 1000W system power with 12" high-output LF driver and 1.4" titanium dome compression driver Power Handling 1000W Peak / 500W RMS High-Definition Audio Processing for professional sound with unmatched clarity Precision 2-way crossover, driver time alignment, and phase correction for easy setup no matter the venue One-button speaker mode selection for application-specific voicing, get the sound you need Eliminate feedback with a one-button automatic feedback destroyer 2 Channel mixer features dual Mackie Wide-Z inputs to handle your mics or instruments easily Includes stereo RCA inputs for easy connection to MP3 player or drum machine Smart Protect DSP protects your speakers from damage when you get loud Monitor angle and voicing mode for easy stage monitoring Great for installing or portable systems Frequency Response (-10 dB): 42 Hz - 23 kHz Frequency Response (-3 dB): 47 Hz - 20 kHz Crossover Frequency: 3 kHz Height: 26.1 in / 663 mm Width: 16.0 in / 406 mm Depth: 14.8 in / 376 mm It weighs in at only 37 pounds  / 16.8 kg Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie SRM450v3 1000W 12-inch Powered Speaker Mackie's gone the extra mile for you with the SRM450v3 active speaker. The newest generation of SRM speakers gives you 1000 watts packed into Mackie's rugged, lightweight molded enclosure and powerful digital audio processing to match. An on-board mixer, one-button tone shaping, feedback elimination, and thru-put signal routing options make the SRM450v3 the most powerful component of your rig, but it stays convenient and easy to use. Lighten your load-in, update your PA, and let the speaker do some work; add a Mackie SRM450v3 active speaker to your rig! General Features: 1000W system power with 12" high-output LF driver and 1.4" titanium dome compression driver Power Handling 1000W Peak / 500W RMS High-Definition Audio Processing for professional sound with unmatched clarity Precision 2-way crossover, driver time alignment, and phase correction for easy setup no matter the venue One-button speaker mode selection for application-specific voicing, get the sound you need Eliminate feedback with a one-button automatic feedback destroyer 2 Channel mixer features dual Mackie Wide-Z inputs to easily handle your mics or instruments Includes stereo RCA inputs for easy connection to MP3 player or drum machine Smart Protect DSP protects your speakers from damage when you get loud Monitor angle and voicing mode for easy stage monitoring Great for installing or portable systems Frequency Response (-10 dB): 42 Hz - 23 kHz Frequency Response (-3 dB): 47 Hz - 20 kHz Crossover Frequency: 3 kHz Height: 26.1 in / 663 mm Width: 16.0 in / 406 mm Depth: 14.8 in / 376 mm It weighs in at only 37 pounds  / 16.8 kg Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie SRM450v3 1000W 12-inch Powered Speaker Mackie's gone the extra mile for you with the SRM450v3 active speaker. The newest generation of SRM speakers gives you 1000 watts packed into Mackie's rugged, lightweight molded enclosure and powerful digital audio processing. An on-board mixer, one-button tone shaping, feedback elimination, and thru-put signal routing options make the SRM450v3 the most powerful component of your rig, but it stays convenient and easy to use. Lighten your load-in, update your PA, and let the speaker do some work; add a Mackie SRM450v3 active speaker to your rig! General Features: 1000W system power with 12" high-output LF driver and 1.4" titanium dome compression driver Power Handling 1000W Peak / 500W RMS High-Definition Audio Processing for professional sound with unmatched clarity Precision 2-way crossover, driver time alignment, and phase correction for easy setup no matter the venue One-button speaker mode selection for application-specific voicing, get the sound you need Eliminate feedback with a one-button automatic feedback destroyer 2 Channel mixer features dual Mackie Wide-Z inputs to handle your mics or instruments easily Includes stereo RCA inputs for easy connection to MP3 player or drum machine Smart Protect DSP protects your speakers from damage when you get loud Monitor angle and voicing mode for easy stage monitoring Great for installing or portable systems Frequency Response (-10 dB): 42 Hz - 23 kHz Frequency Response (-3 dB): 47 Hz - 20 kHz Crossover Frequency: 3 kHz Height: 26.1 in / 663 mm Width: 16.0 in / 406 mm Depth: 14.8 in / 376 mm It weighs in at only 37 pounds  / 16.8 kg Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.