ART COOLSWITCHPRO A/B/Y Amplifier Switching Pedal
$109.99
ART COOLSWITCHPRO A/B/Y Amplifier Switching Pedal
The CoolSwitch Pro is an isolated ABY switch with an extended feature set.
Its ideal for connecting an instrument to multiple amplifiers and switching between either or both together. Because its fully passive, its also bidirectional, so you can use it to switch between two sources for a single destination. Changing guitars on stage? Connect both and make the switch without pops or cable noise.
It features 1/4 TS connections with a parallel Thru jack that can be used as a tuner output, and three switches to modify the second output. The switchable transformer can ensure hum-free operation when connecting two amplifiers, the ground lift can further reduce grounding noise, and the phase switch reverses the output polarity to ensure two different amplifiers are both in phase.
With a stage-proof metal chassis and industrial-grade switches, the CoolSwitch Pro is ruggedly built, easy to use, and adds flexibility to any rig.
General Features:
1/4" TS Input and Parallel Thru Jack
2x 1/4" TS Outputs
Switchable Isolation Transformer, Phase Invert, and Ground Lift on Output B
Supports Bidirectional Use to Switch between Two Sources or Two Destinations
Passive Design - No Power Required
Specifications:
Inputs
1x 1/4" (Input)
Outputs
2x 1/4"1x 1/4" (Thru)
Dimensions (HWD)
2.00" x 4.65" x 5.00" (5.1 cm x 11.8 cm x 12.7 cm)
Weight
1.0 lb (0.45 kg)
**Specifications subject to change without notice
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
ART COOLSWITCH A/B-Y Switching Pedal
$79.99
ART COOLSWITCH A/B-Y Switching Pedal
The CoolSwitch is a streamlined ABY switch for connecting an instrument to multiple amplifiers and switching between either or both together.
It features 1/4" TS connections, and the Inputs are wired in parallel so the second can be used as a Thru jack for a tuner output.
The passive switching circuitry doesn't require a power source, but a 9V battery will power the two status LEDs which indicate the active outputs. The CoolSwitch is also bidirectional, so you can use it to switch between two sources for a single destination. Changing guitars on stage? Connect both and make the switch without pops or cable noise.
With a stage-proof metal chassis, the CoolSwitch is ruggedly built, easy to use, and adds flexibility to any rig.
Specifications:
Inputs
2x 1/4"
Outputs
2x 1/4"
Power Requirements
9 V Battery (included)
Dimensions (HWD)
3.75" x 2.5" x 1.5" (9.0 cm x 6.3 cm x 4.0 cm)
Weight
1lb / .45 kg
**Specifications subject to change without notice
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Nord NSP2 Piano-style Sustain Pedal
$169.00
Nord NSP2 Piano-style Sustain Pedal
Considering Nord’s history of innovation, it is no surprise that there’s more than meets the eye with the NSP2 Piano-style Sustain Pedal. Its durable, reliable housing ensures a road-ready design, perfect for gigging keyboardists looking to get even more out of their Nord keyboard. The NSP2 is outfitted with a continuous sensor to provide nuanced control with maximum range. Use it to manage pedal noise and half-damping, or take a creative approach by assigning it to rotor speed or utilizing it as a morph source, allowing you to augment your sound with tremendous expressive scope easily. No matter your approach, keyboardists at our store agree that the NSP2 is a must-have addition to your Nord keyboard setup!
General Features:
Continuous sensor provides precise control over the broadest range
Variable assignment options include pedal noise, half-damping, rotor speed, morph source, and more
Durable housing and road-ready design ensure plenty of mileage
Tech Specs:
Type: Piano-style Sustain Pedal
Number of Pedals: 1
Connectivity: 1 x 1/4"
Compatibility: Nord Stage 4
Manufacturer Part Number: AMS-NSP2
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Nord NSP Piano-style Sustain Pedal
$69.00
Nord NSP Piano-style Sustain Pedal
The Nord NSP (Nord Sustain Pedal) is a piano-style sustain pedal designed for use with your Nord keyboard. This single, piano-style pedal is Normally Closed polarity. Sweetwater knows that every keyboard needs a sustain pedal, and Nord designed the NSP with the full functionality you want and need. Get the control and playability you want out of your Nord keyboard with the Nord NSP pedal.
General Features:
Full-size pedal for easy use
Normally Closed polarity
1/4" plug for use with Nord keyboards
Tech Specs:
Type: Sustain Pedal
Features: On/Off Piano-style
Polarity: Normally Closed (-)
Connectivity: 1/4" TS plug
Compatibility: Nord Keyboards
Manufacturer Part Number: AMS-NSP
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Nord NTP2 Triple Pedal 2 for Nord Stage 4 Keyboards
$399.00
Nord NTP2 Triple Pedal 2 for Nord Stage 4 Keyboards
Every Nord keyboard is masterfully and meticulously handcrafted in Stockholm, resulting from the culmination of decades of research and development to deliver an unparalleled suite of piano, organ, and synth sounds. With so many options to dial in and refine your style with Nord’s Stage 4 keyboard, it’s only appropriate that you’ve got every tool available. This is where the Triple Pedal 2 comes in, outfitted with premium continuous sensors to ensure you’re given precise dynamic control over a maximum range of expression. Flexibility abounds, as the center and left pedals can be personalized to your performance, capable of managing the pump effect, layer scenes, rotor speed, program changes, and much more. Plus, each pedal can attenuate pedal noise and half damping features of the Stage 4’s powerful pianos. Whether you’re looking for a traditional pedal supplement or a modular expansion to the Stage 4’s unbridled expressive capabilities, Sweetwater’s keyboardists agree that the Triple Pedal 2 is the perfect performance partner.
General Features:
Variable pedal assignments allow for customizable control of various expressive parameters via left and center pedals
Control of pedal noise and half damping features provide optimal control over the Stage 4’s premier pianos
Continuous sensors ensure detailed control of pedal parameters with maximum range of dynamic expression
Made for use with Nord Stage 4 keyboard
Tech Specs:
Type: 3-pedal Unit
Features: Sostenuto, Soft Control, Continuous Sensor, Half Damping, Pedal Noise
Number of Pedals: 3
Connectivity: 1 x 6-pin DIN
Compatibility: Nord Stage 4
Manufacturer Part Number: AMS-NTP2
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Nord NTP Triple Pedal
$299.00
Nord NTP Triple Pedal
The Triple Pedal by Nord is an essential accessory for any studio or touring professional using Nord's Stage 2 series keyboards or Piano 88. It offers the ultimate in dynamic control allowing you to included advanced half-pedaling and release-and-catch techniques into your performances.
The Triple Pedal is setup just as it would be on a modern grand piano. The rightmost pedal offers you traditional sustain while the soft pedal (aka Una Corda) on the left, does just what its name implies. The middle pedal offers Sostenuto control sustaining only selected notes while others play as usual.
General Features:
Offers Professional Dynamic Control
Sustain, Soft and Sostenuto Pedals
For Stage 2 HA76, HA88, SW73 & Piano 88
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Mackie ShowBox Battery-Powered All-in-One Live Performance Two-Button Footswitch
$49.99
$79.99
Mackie ShowBox 2-button FootswitchFootswitch for Mackie ShowBox Speaker System with 2 Buttons and TRS Cable
General Features:
Unlocks greater functionality for your Mackie ShowBox battery-powered speaker system
Plugs directly into the rear-mounted 6-channel mixer
Compact dual footswitch design saves space at your feet
Includes a 1/4-inch TRS cable
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Peavey Sanpera I 4-Button Footswitches Controller for Vypyr VIP Amplifiers
$149.99
$249.99
Peavey Sanpera I Footswitches Controller for Peavey Vypyr Amplifiers with Four Selector Buttons with LEDs, and Expression Pedal
The Sanpera® I includes an expression pedal for executing volume, wah, and pitch shifter functions, plus four momentary feature selector buttons. The Sanpera I is housed in a roadworthy and rugged cast-metal casing and features high-quality metal switches.
General Features:
Volume/Wah/Pitch Shifter expression pedal
4 momentary selector buttons with LEDs
Looper activation and control
Bank select function
Roadworthy cast-metal housing
High-quality metal switches
Packed Weight: 4.41 lb (2 kg)
Packed Length: 12.25" (31.12 cm)
Packed Width: 11.5" (29.21 cm)
Packed Height: 4.75" (12.06 cm)
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Hosa FSC-501 Latching Footswitch
$43.95
$65.92
Hosa FSC-501 Latching Footswitch
FSC-500 series footswitches by Hosa Technology are incredible values. With all-metal chassis and reinforced switches, all footswitch models are designed to withstand years of use. A hardwired 10 ft cord facilitates a broad range placement and rubber pads on both top and bottom prevent it from slipping. Available footswitch models include:
FSC-501: Latching (on-off) Footswitches, designed for guitar amp channel switching and other electronic applications
FSC-502: Momentary Footswitches, normally open (push-to-make), compatible with most electronic instruments and multitrack recorders
FSC-503: Momentary Footswitches, normally closed (push-to-break), compatible with Roland and Yamaha electronic instruments and multitrack recorders
A latching footswitch is designed for guitar amp channel switching, signal processor on-off, and similar electronic device functions. A momentary footswitch is designed to control keyboard/synthesizer sustain and patch advance, drum machine/sequencer start/stop, and multitrack recorder punch in/out.
Consult your owner’s manual to ensure compatibility.
Connector: 1/4 in TS
Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Hosa FSC-502 Momentary Footswitch Normally Open
$43.95
$65.92
Hosa FSC-502 Momentary Footswitch - Normally Open
FSC-500 series footswitches by Hosa Technology are incredible values. With all-metal chassis and reinforced switches, all footswitch models are designed to withstand years of use. A hardwired 10 ft cord facilitates a broad range placement and rubber pads on both top and bottom prevent it from slipping. Available footswitch models include:
FSC-501: Latching (on-off) Footswitches, designed for guitar amp channel switching and other electronic applications
FSC-502: Momentary Footswitches, normally open (push-to-make), compatible with most electronic instruments and multitrack recorders
FSC-503: Momentary Footswitches, normally closed (push-to-break), compatible with Roland and Yamaha electronic instruments and multitrack recorders
A latching footswitch is designed for guitar amp channel switching, signal processor on-off, and similar electronic device functions. A momentary footswitch is designed to control keyboard/synthesizer sustain and patch advance, drum machine/sequencer start/stop, and multitrack recorder punch in/out.
Consult your owner’s manual to ensure compatibility.
Connector: 1/4 in TS
Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Hosa FSC-604 Universal Momentary Footswitch
$39.95
$59.92
Hosa FSC-604 Universal Momentary Footswitch
The FSC-604 footswitch by Hosa Technology is an incredible value. With an all-metal chassis and reinforced switch, it is designed to withstand years of use.
General Features:
• Momentary switch can be set to normally open or closed operation• Hardwired 10 ft cord for placement flexibility• Rubber pads on both top and bottom prevent unit from slipping
A momentary footswitch is designed to control keyboard/synthesizer sustain and patch advance, drum machine/sequencer start/stop, and multitrack recorder punch in/out.
Consult your owner’s manual to ensure compatibility.
Connector: 1/4 in TS
Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Hosa FSC-503 Momentary Footswitch Normally Closed
$43.95
$65.92
Hosa FSC-503 Momentary Footswitch - Normally Closed
FSC-500 series footswitches by Hosa Technology are incredible values. With all-metal chassis and reinforced switches, all footswitch models are designed to withstand years of use. A hardwired 10 ft cord facilitates a broad range placement and rubber pads on both top and bottom prevent it from slipping. Available footswitch models include:
FSC-501: Latching (on-off) Footswitches, designed for guitar amp channel switching and other electronic applications
FSC-502: Momentary Footswitches, normally open (push-to-make), compatible with most electronic instruments and multitrack recorders
FSC-503: Momentary Footswitches, normally closed (push-to-break), compatible with Roland and Yamaha electronic instruments and multitrack recorders
A latching footswitch is designed for guitar amp channel switching, signal processor on-off, and similar electronic device functions. A momentary footswitch is designed to control keyboard/synthesizer sustain and patch advance, drum machine/sequencer start/stop, and multitrack recorder punch in/out.
Consult your owner’s manual to ensure compatibility.
Connector: 1/4 in TS
Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.