Car Audio Bundles & Packages (960)

Alpine KTA-200M Mono Power Pack Amp with Alpine W12S4 12" Subwoofer and Bass Knob Alpine KTA-200M Mono Power Pack Amp with Alpine W12S4 12" Subwoofer and Bass Knob - This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine W12S4 12-inch Single 4 Ohm Subwoofer, an Alpine RUX-KNOB.2 Remote Bass Knob, a pry kit, and an Alpine cozy.Alpine KTA-200M Mono 400-Watt Power Pack AmplifierThe KTA-200M fits in the open space behind Alpines iLX-W650 7-inch Mech-Less (no CD/ DVD) Audio/Video receiver to create Alpines unique PowerStack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D) occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. CTA-2006 PowerStack capable with the Alpine iLX-W650 Alpines Class D Amplifier Circuit w/ Dynamic Peak Power (DPP) 100W x 1 RMS (4, 14.4V, 1% THD+N) 200W x 1 RMS (2, 14.4V, 1% THD+N) 400W x 1 DPP (2, 14.4V, 1% THD+N) >85dB S/N (ref. 1W into 4) 0.1% THD+N (ref. 10W into 2) Single-side 22-pin connector RCA inputs (selectable, Low range=0.2-4V) Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable) Alpine W12S4 12-inch Single 4 Ohm SubwooferOverview: 12-inch single 4 subwoofer 250W RMS 750W peak power handling Frequency Response: 32Hz-200Hz 5-5/16-inch mounting depth Recommended Sealed box volume: 1.09 cu. Ft. Recommended Ported box volume: 1.91 cu. ft What's in the W12S4 package: One 12" Subwoofer Adhesive-backed foam gasket Application Guide Online product registration information Warranty information Important Notice! W12S4 owner's manual Alpine RUX-KNOB.2 Remote Bass KnobWith the RUX-KNOB, get full control over your amplifier, conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside. Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine SWT-12S4 12" Bass System with Alpine KTA-30MW Mono Weather Resistant Tough Power Pack Amplifier Alpine SWT-12S4 12" Bass System with Alpine KTA-30MW Mono Weather Resistant Tough Power Pack Amplifier—This bundle includes an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms and an Alpine SWT-12S4 1500W Max Single 12" Sealed Subwoofer Tube Enclosure. Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack will deliver powerful bass output for subwoofers in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags. General Features: Alpine KTA-30MW Class D Monoblock Weather Resistant Power Pack Amplifier 300 Watts RMS X 1 @ 4 Ohms Power Handling 600 Watts RMS X 1 @ 2 Ohms Power Handling CTA-2006 compliant Frequency Response: 20-400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 83dB Variable Low Pass filter 50-400Hz @ -24dB/Oct. Variable Bass Boost (0-12 dB at 50 Hz) Fuse Rating: 25A Weather-resistant (IP66 rating) Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs Dimensions: 7” W x 3.5” H x 1.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the box: Mono amplifier 14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends) 4 Self-tapping screws (Length 3/4") Connection sheet Limited Warranty sheet Alpine KTA-30MW owner's manual Alpine SWT-12S4 1500W Max Single 12" Bass Reflex Sealed Subwoofer Tube Enclosure With 1500W peak power handling, this ready-to-use bass reflex subwoofer tube is just for big bass fans. A protective grille ensures that nothing sliding around in the trunk damages the woofer. General Features: 12" 4 ohm Bass Reflex Series Subwoofer 1500 Watts Peak Power Handling 300 Watts RMS Power Handling Heavy-Duty Subwoofer Grill Stitched Alpine Logo Carpeted Exterior Push SPK Terminal Installation Brackets and Belts Included Frequency Response: 28 - 200 Hz Sensitivity: 92 dB Speaker Impedance: 4 Ω Enclosure Dimensions: 12.75"W x 26" D Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 12" Passive Subwoofer Push SPK Terminal Voice coil size/type Sensitivity: 92dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTA-200M Mono Power Pack Amp with Alpine SWT-12S4 12" Loaded Tube Subwoofer and RUX-KNOB.2 Bass Knob Alpine KTA-200M Mono Power Pack Amp with Alpine SWT-12S4 12" Loaded Tube Subwoofer and Bass Knob - This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine SWT-12S4 1500W Max (300W RMS) Single 12" Sealed Subwoofer Tube Enclosure, and an Alpine RUX-KNOB.2  Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier The KTA-200M fits in the open space behind Alpine’s iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The amplifier's compact footprint (7-inch W x 1.5-inch H x 3.5-inch D) and the iLX-W650's shallow chassis (1.9-inch D) occupy the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space.  General Features: Power Stack is compatible with the Alpine iLX-W650 compact mono subwoofer amplifier Alpine’s Class D Amplifier Circuit with DPP Dynamic Peak Power (DPP) technology adds a burst of power when needed CTA-2006 compliant 100W x 1 RMS @ 4Ω, Power Outputs 200W x 1 RMS @ 2Ω, Power Outputs 400W x 1 DPP @ 4Ω, Power Outputs Signal to Noise Ratio 85dB (ref. 1W into 4Ω) ≤0.1% THD+N (ref. 10W into 2Ω) Single-side 22-pin connector selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave) preamp and speaker-level inputs RCA inputs (selectable, Low range=0.2-4V) Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable) wiring, hardware, and fuse are not included with the amplifier Power Stack bracket included for mounting the amp behind the Alpine iLX-W650 digital multimedia receiver Authorized Dealer 1-year Warranty Alpine SWT-12S4 1500W Max Single 12" Bass Reflex Sealed Subwoofer Tube Enclosure With 1500W peak power handling, this ready-to-use bass reflex subwoofer tube is just for big bass fans. A protective grille ensures that nothing slides around in the trunk and damages the woofer. General Features: 12" 4 ohm Bass Reflex Series Subwoofer 1500 Watts Peak Power Handling 300 Watts RMS Power Handling Heavy-Duty Subwoofer Grill Stitched Alpine Logo Carpeted Exterior Push SPK Terminal Installation Brackets and Belts Included Frequency Response: 28 - 200 Hz Sensitivity: 92 dB Speaker Impedance: 4 Ω Enclosure Dimensions: 12.75"W x 26" D Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 12" Passive Subwoofer Push SPK Terminal Voice coil size/type Sensitivity: 92dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included Alpine RUX-KNOB.2 Remote Bass KnobWith the RUX-KNOB, get complete control over your PDX-M6 or PDX-M12 amplifier, conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside. Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTA-200M Mono Power Pack Amp with Alpine SWT-12S4 12" Loaded Tube Subwoofer and Absolute TW500 Dome Tweeter and Electrical Tape and Mobile Bracket Alpine KTA-200M Mono Power Pack Amp with Alpine SWT-12S4 12" Loaded Tube Subwoofer—This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier and an Alpine SWT-12S4 1500W Max (300W RMS) Single 12" Sealed Subwoofer Tube Enclosure.   Alpine KTA-200M Mono Power Pack Amp The KTA-200M fits in the open space behind Alpine’s iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D), occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier in a compact size, easy installation, and overall power. Both amplifiers, while designed to “stack” behind the iLX-W670 or similar 2-DIN radio, can also be used as standalone solutions in vehicles that don’t have space for a traditional amplifier. The KTA-200M produces 400 watts with Alpine’s DPP technology. During powerful or “dynamic” passages of music, DPP will adapt to the music's needs by adjusting the amplifier's gain and delivering bursts of power that match the peak demands of the music. Alongside that is the new voltage-adjusting input circuit that maintains the maximum source signal level without clipping. General Features: Power Stack capable with the Alpine iLX-W650 compact mono subwoofer amplifier Alpine’s Class D Amplifier Circuit with DPP Dynamic Peak Power (DPP) technology adds a burst of power when needed CTA-2006 compliant 100W x 1 RMS @ 4Ω, Power Outputs 200W x 1 RMS @ 2Ω, Power Outputs 400W x 1 DPP @ 4Ω, Power Outputs Signal to Noise Ratio 85dB (ref. 1W into 4Ω) ≤0.1% THD+N (ref. 10W into 2Ω) Single-side 22-pin connector selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave) preamp and speaker-level inputs RCA inputs (selectable, Low range=0.2-4V) Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable) wiring, hardware, and fuse not included with the amplifier Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver Authorized Dealer 1-year Warranty Alpine SWT-12S4 1500W Max Single 12" Bass Reflex Sealed Subwoofer Tube Enclosure With 1500W peak power handling, this ready-to-use bass reflex subwoofer tube is just for big bass fans. A protective grille ensures that nothing sliding around in the trunk damages the woofer. General Features: 12" 4 ohm Bass Reflex Series Subwoofer 1500 Watts Peak Power Handling 300 Watts RMS Power Handling Heavy-Duty Subwoofer Grill Stitched Alpine Logo Carpeted Exterior Push SPK Terminal Installation Brackets and Belts Included Frequency Response: 28 - 200 Hz Sensitivity: 92 dB Speaker Impedance: 4 Ω Enclosure Dimensions: 12.75"W x 26" D Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 12" Passive Subwoofer Push SPK Terminal Voice coil size/type Sensitivity: 92dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTA-200M Mono Power Pack Amp with Alpine SWT-12S4 12" Loaded Tube Subwoofer Alpine KTA-200M Mono Power Pack Amp with Alpine SWT-12S4 12" Loaded Tube Subwoofer—This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier and an Alpine SWT-12S4 1500W Max (300W RMS) Single 12" Sealed Subwoofer Tube Enclosure. Alpine KTA-200M Mono Power Pack Amp General Features: Power Stack is compatible with the Alpine iLX-W650 compact mono subwoofer amplifier Alpine’s Class D Amplifier Circuit with DPP Dynamic Peak Power (DPP) technology adds a burst of power when needed CTA-2006 compliant 100W x 1 RMS @ 4Ω, Power Outputs 200W x 1 RMS @ 2Ω, Power Outputs 400W x 1 DPP @ 4Ω, Power Outputs Signal to Noise Ratio 85dB (ref. 1W into 4Ω) ≤0.1% THD+N (ref. 10W into 2Ω) Single-side 22-pin connector selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave) preamp and speaker-level inputs RCA inputs (selectable, Low range=0.2-4V) Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable) wiring, hardware, and fuse are not included with the amplifier Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver Authorized Dealer 1-year Warranty Alpine SWT-12S4 1500W Max Single 12" Bass Reflex Sealed Subwoofer Tube Enclosure With 1500W peak power handling, this ready-to-use bass reflex subwoofer tube is just the thing for big bass fans. A protective grille ensures that nothing sliding around in the trunk damages the woofer. General Features: 12" 4 ohm Bass Reflex Series Subwoofer 1500 Watts Peak Power Handling 300 Watts RMS Power Handling Heavy-Duty Subwoofer Grill Stitched Alpine Logo Carpeted Exterior Push SPK Terminal Installation Brackets and Belts Included Frequency Response: 28 - 200 Hz Sensitivity: 92 dB Speaker Impedance: 4 Ω Enclosure Dimensions: 12.75"W x 26" D Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 12" Passive Subwoofer Push SPK Terminal Voice coil size/type Sensitivity: 92dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine ILX-W670 7" Shallow-Chassis Multimedia Receiver Compatible Fit for Jeep Wrangler 03-06 Dash Kit, Wiring Harness, and Antenna Adapter Jeep Wrangler 03-06 Dash Kit, Wiring Harness and Antenna Adapter with Alpine ILX-W670 7" car stereo Shallow-Chassis Multimedia Receiver - This bundle includes an Alpine iLX-W670 Digital Multimedia Receiver with CarPlay and Android Auto Compatibility, a Metra 95-6541 Dash Kit Compatible with Jeep Wrangler 2003-2006, a Metra 70-6502 Wiring Harness Compatible with Chrysler 2002-2009, a Metra 40-CR10 Antenna Adapter Cable Compatible with Chrysler/Dodge/Ford/GM/Jeep 20002 and Up, a pry kit.Alpine iLX-W670 Digital Multimedia Receiver with CarPlay and Android Auto Compatibility General Features: digital media receiver with AM/FM tuner (does not play CDs) shallow-mount chassis design (2-7/16" deep) designed to pair with Alpine's KTA-450 power pack amplifier touchscreen swipe controls designed to work with CarPlay and Android Auto hands-free control lets you access apps using your voice built-in Bluetooth connectivity enjoy music apps like Pandora and Spotify built-in amplifier (18 watts RMS CEA-2006/50 peak x 4 channels) USB port accommodates various devices and thumb drives FLAC Compatible 7" capacitive touchscreen Smartphone Features: designed to work with CarPlay and Android Auto built-in iPod, iPhone, and iPad control Android control through USB Metra 95-6541 Dash Kit Compatible with Jeep Wrangler 2003-2006 ISO DDIN radio provision Painted black to match the factory dash panel Wiring & Antenna Connections Metra 70-6502 Wiring Harness Compatible with Chrysler 2002-2009 Plugs into the Car Harness at the radio Power 4 Speakers Metra 40-CR10 Antenna Adapter Cable Compatible with Chrysler/Dodge/Ford/GM/Jeep 20002 and Up Chrysler factory antenna adapter Snap-lock to the aftermarket radio Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine W10S4 10" Bass Subwoofer 750W Max (250W RMS) 10" BassLine Series Single 4 ohm Car Subwoofer Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.The surround and wattage match made in heaven.The 250 watts of continuous power that the W10S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features: 10" Single 4-ohm BassLine (Bass) Series Subwoofer Power Handling: Peak: 750 watts RMS: 250 watts Recommended power range: 50W - 250W RMS Polypropylene-Mica cone High-excursion poly-foam surround Progressive Wavelet Ribs (P.W.R.) cone design An optional Alpine KTE-10PG subwoofer grill is available and is a wonderful complement to the trim ring with the Alpine logo High-strength custom steel frame 8AWG push terminals 2" voice coil 52oz. magnet Top-mount depth: 5-1/16" Cutout diameter: 9" Frequency Response: 24 - 200Hz Sensitivity: 86.6dB Resonance Frequency (Fs): 32 Authorized Dealer 1-year Manufacturer's Warranty What's in the  W10S4 package: W10S4 owner's manual One 10" Subwoofer per box Adhesive-backed foam gasket Application Guide Online product registration information Warranty Information Important Notice! ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTA-200M Mono Power Pack Amp with Alpine SWT-S10 10" Loaded Tube Subwoofer This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier and an Alpine SWT-S10 1200W Max (250W RMS) Single 10" Sealed Subwoofer Tube Enclosure. Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier The KTA-200M fits into the open space behind Alpine’s iLX-W650 7-inch Mech-Less (no CD/DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D), occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier in a compact size, easy installation, and overall power. While designed to “stack” behind the iLX-W650, iLX-W670, or similar 2-DIN radio, both amplifiers can also be used as standalone solutions in vehicles that don’t have space for a traditional amplifier. The KTA-200M produces 400 watts with Alpine’s DPP technology. During robust or “dynamic” passages of music, DPP will adapt to the music's needs by adjusting the amplifier's gain and delivering bursts of power that match the music's peak demands. Alongside this is the new voltage-adapting input circuit, which maintains the maximum source signal level without clipping. General Features: Power Stack capable with the Alpine iLX-W650 compact mono subwoofer amplifier Alpine’s Class D Amplifier Circuit with DPP Dynamic Peak Power (DPP) technology adds a burst of power when needed CTA-2006 compliant 100W x 1 RMS @ 4Ω, Power Outputs 200W x 1 RMS @ 2Ω, Power Outputs 400W x 1 DPP @ 4Ω, Power Outputs Signal to Noise Ratio 85dB (ref. 1W into 4Ω) ≤0.1% THD+N (ref. 10W into 2Ω) Single-side 22-pin connector selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave) preamp and speaker-level inputs RCA inputs (selectable, Low range=0.2-4V) Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable) wiring, hardware, and fuse are not included with the amplifier Power Stack bracket included for mounting the amp behind the Alpine iLX-W650 digital multimedia receiver Authorized Dealer 1-year Warranty What is in the KTA-200M package: KTA-200M Owner's Manual Mono amplifier 12" Input/Output/Power harness 1 Head unit (iLX-W650) mounting bracket 2 Universal mounting brackets Four M5x6mm Allen head machine screws (3mm) Two M2.6x8mm Machine screws Four 3/8" Screws Warranty information Online product registration information FCC Compliance Statement Alpine SWT-S10 1200W Max Single 10" Sealed Subwoofer Bass Tube Enclosure Combining the intense low-bass performance and ground-shaking output of the traditional Type-R subwoofers in a thin package optimized for tiny enclosures. The SWT 10” Truck Subwoofer has been engineered to offer more installation flexibility without sacrificing enormous output to build the ideal sound system for your truck. It is 4-1/8” deep. These subs provide deep bass performance that typically cannot be accommodated in a car or truck. The vented pole optimized for a 4-1/8” deep box is the ideal enclosure size, meaning excellent bass performance can fit just about anywhere in your truck. General Features: Single 10" Sealed Subwoofer Tube Enclosure 1200 Watts MAX Power Handling 250 Watts RMS Power Handling Final Impedance: 4 ohms Preloaded with a single 10" Subwoofer Sealed enclosure with embroidered black carpet Enclosure Dimensions: 11.25"W x 23.65" D 1-year Manufacturer's Warranty Subwoofer Features: 10" Passive Subwoofer Push SPK Terminal Frequency Response: 35-200 Hz Sensitivity: 90dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included What is in the SWT-S10 package: W10S4 owner's manual One 10" Subwoofer per box Adhesive-backed foam gasket Application Guide Online product registration information Warranty Information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Mono and KTA-30FW 4-Channel Weather-Resistant Amplifiers Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Mono and KTA-30FW 4-Channel Weather-Resistant Amplifiers - This bundle includes an Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms, an Alpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack Amplifier, a pry kit, and an Alpine cozy.Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2 Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch DAlpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-OhmsSpecifications: Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.) Weather resistant (IP66 rating) 300W x 1 D.P.P. (2, 14.4V, 1% THD+N) CTA-2006-B Specifications: 200W RMS x 1 (4, 14.4V, 1% THD+N) 82dB S/N (ref. 1W into 4) >0.05% THD OEM-grade Tyco 26-pin connector with pigtail wire harness Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)Sound control: Crossovers: Off/HP/LP, Fc=50-400Hz @ -12dB/Oct. (variable) Input gain settings (variable) 2ch inputAlpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack AmplifierSpecifications: Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.) Weather resistant (IP66 rating) 150W x 4 D.P.P. (2/4, 14.4V, 1% THD+N) CTA-2006-B Specifications: 75W RMS x 4 (2/4, 14.4V, 1% THD+N) 82dB S/N (ref. 1W into 4) >0.05% THD OEM-grade Tyco 26-pin connector with pigtail wire harness Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine KTA-200M Mono Power Pack Amp with Alpine W12S4 12" Subwoofer Alpine KTA-200M Mono Power Pack Amp with Alpine W12S4 12" Subwoofer and Bass Knob - This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine W12S4 12-inch Single 4 Ohm Subwoofer, a pry kit, and an Alpine cozy.Alpine KTA-200M Mono 400-Watt Power Pack AmplifierThe KTA-200M fits in the open space behind Alpines iLX-W650 7-inch Mech-Less (no CD/ DVD) Audio/Video receiver to create Alpines unique PowerStack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D) occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. CTA-2006 PowerStack capable with the Alpine iLX-W650 Alpines Class D Amplifier Circuit w/ Dynamic Peak Power (DPP) 100W x 1 RMS (4, 14.4V, 1% THD+N) 200W x 1 RMS (2, 14.4V, 1% THD+N) 400W x 1 DPP (2, 14.4V, 1% THD+N) >85dB S/N (ref. 1W into 4) 0.1% THD+N (ref. 10W into 2) Single-side 22-pin connector RCA inputs (selectable, Low range=0.2-4V) Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable) Alpine W12S4 12-inch Single 4 Ohm SubwooferOverview: 12-inch single 4 subwoofer 250W RMS 750W peak power handling Frequency Response: 32Hz-200Hz 5-5/16-inch mounting depth Recommended Sealed box volume: 1.09 cu. Ft. Recommended Ported box volume: 1.91 cu. ft Performance: Efficiency & Tight Bass An optimized magnet circuit allows more focused magnetism in the gap which results in improved efficiency. This means tighter bass control and more output! What's in the W12S4 package: One 12" Subwoofer Adhesive-backed foam gasket Application Guide Online product registration information Warranty information Important Notice! W12S4 owner's manual Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTA-200M Mono Power Pack Amp with Alpine W10S4 10" Subwoofer Alpine KTA-200M Mono Power Pack Amp The KTA-200M fits into the open space behind Alpine’s iLX-W650 7-inch Mech-Less (no CD/DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D) occupy the same depth as a traditional 2-DIN chassis, resulting in an easy-to-hideaway bass solution that adds more power to the sound system without occupying space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier, in a compact size, easy installation, and overall power. Both amplifiers, designed to “stack” behind the iLX-W650 or similar 2-DIN radio, can also be used as standalone solutions in vehicles that lack space for a traditional amplifier. The KTA-200M produces 400 watts with Alpine’s DPP technology. During powerful, or “dynamic,” passages of music, DPP will adapt to the music's needs by adjusting the amplifier's gain and delivering bursts of power that match the music's peak demands. Alongside this is the new voltage-adapting input circuit, which maintains the maximum source signal level without clipping. General Features: Power Stack is compatible with the Alpine iLX-W650 compact mono subwoofer amplifier Alpine’s Class D Amplifier Circuit with DPP Dynamic Peak Power (DPP) technology adds a burst of power when needed CTA-2006 compliant 100W x 1 RMS @ 4Ω, Power Outputs 200W x 1 RMS @ 2Ω, Power Outputs 400W x 1 DPP @ 4Ω, Power Outputs Signal to Noise Ratio 85dB (ref. 1W into 4Ω) ≤0.1% THD+N (ref. 10W into 2Ω) Single-side 22-pin connector selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave) preamp and speaker-level inputs RCA inputs (selectable, Low range=0.2-4V) Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable) wiring, hardware, and fuses are not included with the amplifier Power Stack bracket included for mounting the amp behind the Alpine iLX-W650 digital multimedia receiver Authorized Dealer 1-year Warranty Alpine W10S4 10" Bass Subwoofer 750W Max (250W RMS) 10" BassLine Series Single 4-ohm Car Subwoofer Legendary Alpine quality at an affordable price Car audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that will not break the bank. Surround and wattage match made in heaven. The 250 watts of continuous power that the W10S4 handles complements the poly-foam surround that Alpine went with. It offers the best sound quality available at this price point. General Features: 10" Single 4-ohm BassLine (Bass) Series Subwoofer Power Handling: Peak: 750 watts RMS: 250 watts Recommended power range: 50W - 250W RMS Polypropylene-Mica cone High-excursion poly-foam surround Progressive Wavelet Ribs (P.W.R.) cone design An optional Alpine KTE-10PG subwoofer grill is available and is a wonderful complement to the trim ring with the Alpine logo High-strength custom steel frame 8AWG push terminals 2" voice coil 52oz. magnet Top-mount depth: 5-1/16" Cutout diameter: 9" Frequency Response: 24 - 200Hz Sensitivity: 86.6dB Resonance Frequency (Fs): 32 Authorized Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-SB12V 12" Vented Loaded Halo Enclosure with Alpine KTA-30MW Mono and KTA-30FW 4-Channel Weather-Resistant Amplifiers with Amp Wire Kit Description Alpine S-SB12V 12" Vented Loaded Halo Enclosure with Alpine KTA-30MW Mono and KTA-30FW 4-Channel Weather-Resistant Amplifiers - This bundle includes an Alpine S-SB12V Pre-Loaded S-Series 12-inch Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms, an Alpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack Amplifier, a pry kit, and an Alpine cozy.Alpine S-SB12V Pre-Loaded S-Series 12-inch Subwoofer EnclosureSpecifications: Includes S-W12D4 wired in parallel 600W RMS power handling 2 Impedance Ported enclosure design Frequency response: 26-200 Hz Vented enclosure tuning frequency: 35 Hz Dimensions 17-inch W x 14.625-inch H X 15-inchAlpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-OhmsSpecifications: Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.) Weather resistant (IP66 rating) 300W x 1 D.P.P. (2, 14.4V, 1% THD+N) CTA-2006-B Specifications: 200W RMS x 1 (4, 14.4V, 1% THD+N) 82dB S/N (ref. 1W into 4) >0.05% THD OEM-grade Tyco 26-pin connector with pigtail wire harness Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)Alpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack AmplifierSpecifications: Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.) Weather resistant (IP66 rating) 150W x 4 D.P.P. (2/4, 14.4V, 1% THD+N) CTA-2006-B Specifications: 75W RMS x 4 (2/4, 14.4V, 1% THD+N) 82dB S/N (ref. 1W into 4) >0.05% THD OEM-grade Tyco 26-pin connector with pigtail wire harness Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)Sound control: Crossovers: Off/HP/LP, Fc=50-400Hz @ -12dB/Oct. (variable) Input gain settings (variable) 2ch/4ch input (selectable) Absolute KIT 4 Wiring Kit   General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of red 4 AWG high current power cable 3 ft. of black 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire 6 ft. of split loom tubing 1 Gold plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov