Monoblock Amplifiers (181)

Soundstream BXT1.7500D 7500 Watts Mono Amplifier Built-In BX-10 Epicenter General Features: Digital Bass Reconstruction Processor Built-in Adds Impact to Music w/ Insufficient Sub Bass 27Hz-63Hz Variable Center/Sweep Frequency Variable Q/Width to Broaden or Narrow the Bandwidth 2.5V-10V Output Voltage for Optimum Bass Tuning LED MAX BASS Indicators Warning of Extreme Levels 1-ohm Minimum Impedance Monoblock Operation Bridge 2 Monoblocks Together for Double Power! MOSFET Power Supply w/ Audiophile Grade IRTM Transistors Military Grade SMT PCB Maintains Dynamic Performance Direct Short, Thermal, & Overload Circuits Protect Amplifier 200mV-6V High Level or Low-Level RCA Input & Output Variable 12dB Low Pass Crossover Blocks High Frequencies Variable 12dB Subsonic Crossover Protects Subwoofer 1800 Phase Shift to Match Polarity of System Speakers Dash Mount Gain Control Module Included Specifications: Power Handling: 1000W x 1 at 4-Ohm Mono 1,500W x 1 at 2-Ohm Mono 2500W x 1 at 1-Ohm Mono 7500W Max Power Variable 40-150Hz 12dB Low Pass Crossover Variable 10-50Hz 12dB Subsonic Crossover Selectable 180degree Phase Shift Total Harmonic Distortion: < 0.3% Frequency Response: 15-500Hz Signal-to-Noise Ratio: 105dB Input Sensitivity: 200mV - 6V Dimensions: 7.50" W x 2.25" H x 15.75" L 1-Year Autosoundswarehouse Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Audio Control ACX-300.1 ACX Series All-Weather 300W Monoblock Audio Marine Amplifier AudioControl’s ACX-300.1 all-weather monoblock amplifier delivers honest power levels to the sound system in your boat, ATV, UTV motorcycle, and more. The ACX-300.1 will ensure your open-air speakers and subwoofers provide plenty of punch and clarity all day. Installer-friendly, heavy gauge quick-connect wiring makes installation quick and painless, making the ACX-300.1 all-weather monoblock amplifier the perfect solution for your next adventure. General Features: Audio Control ACX Series ACX-300.1 4-Ohm Monoblock Amplifier RMS Power Rating: 4 ohms: 175 watts x 1 channel RMS Power Rating: 2 ohms: 300 watts x 1 channel Total power output: 600 watts CEA-2006 Compliant Amplifier AccuBASS® One channel operation Frequency Response: 26 - 22000 Hz Total Harmonic Distortion (THD): <0.01% Signal to Noise Ratio: 106 dB Variable low-pass filter: 80 - 120 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the ACX-300.1 package: ACX-300.1 owner's manual Mono amplifier 7" Power & ground harness 7" Speaker output harness ACR-1 Remote Level Control 2 Crimp-on terminals for power & ground harness Harness locking pin ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Pioneer GM-DX971 2400W Max 1-CH Monoblock Class-D Car Audio Amplifier with Remote Bass Control + Absolute KIT4 4 Gauge Amp Kit GM-DX971 is a 1-channel subwoofer amplifier that can deliver up to 1,200 watts RMS to your subwoofer for powerful bass producing a strong and heavy beat. Highly efficient Class D technology and CTA-2006 complaint keep this powerful amp running and designed for a small chassis that fits many out-of-the-way spaces. The speaker-level inputs allow the installation of this amp into a factory system with no RCA connections. The amplifier switches its input mode automatically when it detects the high-level signal, eliminating the need to run a turn-on lead to your receiver or fuse box. The amp's got a low-pass filter that lets you quickly sharpen and focus the bass on suiting your vehicle's interior and a wired remote boost that lets you control the amount of bass boost from the front seat. This limited-edition amp uses high-grade electronic parts and gold-plated RCA connections to ensure maximum performance. General Features: Class D 1 ohms Stable Monoblock Amplifier RMS Power Rating: 4 ohms: 500 watts x 1 channel RMS Power Rating: 2 ohms: 800 watts x 1 channel RMS Power Rating: 1 ohm: 1200 watts x 1 channel Total RMS power output: 1200 watts CEA-2006 Compliant Amplifier Pulse Width Modulated MOSFET power supply LED Power/Protect Light Wired remote bass level control included Soft start turn-on 3-way protection circuitry (thermal, overload, and speaker short protection) Input sensitivity: Low level: 200mV - 6.5 volts Frequency Response: 10 - 240 Hz Total Harmonic Distortion (THD): 1% Signal to Noise Ratio: 75 dB Variable low-pass filter: 40 - 240 Hz Variable Bass Boost: 0 - 18 dB Fuse Rating: 120A 4 AWG gauge power and ground wiring are recommended for installation. Dimensions: 1-3/4" W x 1-5/8" L x 3/4" H Authorized Internet Dealer 1-year Manufacture Warranty What’s in the GM-DX971 package: 1-Channel Subwoofer Amplifier Three 40-amp ATO fuses (installed) Bass Boost Remote Control Bass Boost Remote Control Cable Speaker Level to RCA Input Adapter Installation Screws X 4 Wire Terminal Tool Owner's manual (English/ French) 1-Year Warranty Sheet ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Pioneer GM-DX871 1600 Watts Class D Mono Amplifier w/ Gold-plated RCA Terminals and Bass Boost Remote + Absolute KIT4 4 Gauge Amp KitThe GM-DX871 mono subwoofer amplifier can deliver up to 800 watts RMS to your subwoofer for powerful bass that will give every song a strong and heavy beat. Highly efficient Class D technology keeps this powerful amp running as cool as it looks and allows for a small chassis that fits many out-of-the-way spaces. General Features: Class D Monoblock Amplifier RMS Power Rating: 4 ohms: 300 watts x 1 chan. RMS Power Rating: 2 ohms: 500 watts x 1 chan. RMS Power Rating: 1 ohm: 800 watts x 1 chan. Total power output: 1600 watts CEA-2006 Compliant Amplifier Wired remote bass level control included High-Quality Textured Aluminum Panel and Tough Frame Mono channel operation Gold-plated RCA Terminals HQ Sound Parts Frequency Response: 10 Hz to 240 Hz Total Harmonic Distortion (THD): < 0.5% (100 Hz) Signal to Noise Ratio: >100 dB Variable low-pass filter: 40-240 Hz, 12 dB/octave Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz Fuse Rating: 40A x 2 4 gauge power and ground wiring is recommended for installation. Dimensions: "10-3/8"W x "2-3/8"H x "7-7/8"D Authorized Internet Dealer What’s in the GM-DX871 package: 1-Channel Subwoofer Amplifier Two 40 A ATO fuses (installed) Bass Boost Remote Control Bass Boost Remote Control Cable Speaker Level to RCA Input Adapter Installation Screws X 4 Wire Terminal Tool Owner's manual (English/ French/ Spanish) 1-Year Warranty Sheet ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier The KTA-200M fits in the open space behind Alpine’s iLX-W670 or iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W670 (1.9-inch D), occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier in a compact size, easy installation, and overall power. While designed to “stack” behind the iLX-W670 iLX-W650, or similar 2-DIN radio, both amplifiers can also be used as standalone solutions in vehicles that don’t have space for a traditional amplifier. The KTA-200M produces 400 watts with Alpine’s DPP technology. During powerful or “dynamic” passages of music, DPP will adapt to the music's needs by adjusting the amplifier's gain and delivering bursts of power that match the peak demands of the music. Alongside that is the new voltage-adapting input circuit to maintain the maximum source signal level without clipping. General Features: Power Stack capable with the Alpine iLX-W670 iLX-W650 compact mono subwoofer amplifier Alpine’s Class D Amplifier Circuit with DPP Dynamic Peak Power (DPP) technology adds a burst of power when needed CTA-2006 compliant 100W x 1 RMS @ 4Ω, Power Outputs 200W x 1 RMS @ 2Ω, Power Outputs 400W x 1 DPP @ 4Ω, Power Outputs Signal to Noise Ratio 85dB (ref. 1W into 4Ω) ≤0.1% THD+N (ref. 10W into 2Ω) Single-side 22-pin connector selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave) preamp and speaker-level inputs RCA inputs (selectable, Low range=0.2-4V) Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable) wiring, hardware, and fuse not included with the amplifier Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver Authorized Dealer 1-year Warranty What is in the KTA-200M package: KTA-200M Owner's Manual Mono amplifier 12" Input/Output/Power harness 1 Head unit (iLX-W650) mounting bracket 2 Universal mounting brackets Four M5x6mm Allen head machine screws (3mm) Two M2.6x8mm Machine screws Four 3/8" Screws Warranty information Online product registration information FCC Compliance Statement Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DMD1000.1D 1-Channel 1000W RMS Digital Amplifier GENERAL INFORMATION DMD series amplifiers from Diamond Audio provide best-in-class performance for the value, period! DMD series amplifiers provide substantial power in a very small footprint heat sink, which is the solution for any budget-friendly mobile audio sound system. DMD series comprises five amplifier models: one 4-channel, three mono-channel, and one 6-channel amplifier to select from. 1 Channel Mono Block Digital Amplifier 1000W x 1CH @ 2Ω / 680W x 1CH @ 4Ω RMS Power Output Input Sensitivity: 0.2-10 Volt Crossover Filter : 50-250Hz (LPF), 24dB Per Octave Slope Frequency Response: 20-500Hz Signal to Noise Ratio: > 90dB Bass Boost: 0-18dB Overall Operation Efficiency: >88% Selectable REM / VOX / DC Turn On Modes Variable Phase Adjustment Dimensions: 8.0” x 6.85” x 1.9” / 203.1 x 174 x 48.4 mm Remote Bass Knob Included ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DMD500.1D 1-Channel 500W RMS Digital Amplifier GENERAL INFORMATION DMD series amplifiers from Diamond Audio provide best-in-class performance for the value, period! DMD series amplifiers provide substantial power in a very small footprint heat sink, which is the solution for any budget-friendly mobile audio sound system. DMD series comprises five amplifier models: one 4-channel, three mono-channel, and one 6-channel amplifier to select from. 1 Channel Mono Block Digital Amplifier 500W x 1CH @ 2Ω / 340W x 1CH @ 4Ω RMS Power Output Input Sensitivity: 0.2-10 Volt Crossover Filter : 50-250Hz (LPF), 24dB Per Octave Slope Frequency Response: 20-500Hz Signal to Noise Ratio: > 90dB Bass Boost: 0-18dB Overall Operation Efficiency: >88% Selectable REM / VOX / DC Turn On Modes Variable Phase Adjustment Dimensions: 7.2” x 6.85” x 1.9” / 183.1 x 174 x 48.4 mm Remote Bass Knob Included ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DMD250.1D 1-Channel 250 RMS Digital Amplifier GENERAL INFORMATION DMD series amplifiers from Diamond Audio provide best-in-class performance for the value, period! DMD series amplifiers provide substantial power in a small-footprint heat sink, which is the solution for any budget-friendly mobile audio sound system. DMD series comprises five amplifier models: one 4-channel, three mono-channel, and one 6-channel amplifier to select from. 1 Channel Mono Block Digital Amplifier 250W x 1CH @ 2Ω / 160W x 1CH @ 4Ω RMS Power Output Input Sensitivity: 0.2-10 Volt Crossover Filter : 50-250Hz (LPF), 24dB Per Octave Slope Frequency Response: 20-500Hz Signal to Noise Ratio: > 90dB Bass Boost: 0-18dB Overall Operation Efficiency: >88% Selectable REM / VOX / DC Turn On Modes Variable Phase Adjustment Dimensions: 6.42” x 6.85” x 1.9” / 163.1 x 174 x 48.4 mm Remote Bass Knob Included ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio MICRO81U 1-Channel Full Range Class D Sub Amplifier GENERAL FEATURES  Diamond Audio continues to break new dimensions by introducing the MICRO8U amplifiers. Following in the footsteps of the highly popular MICRO series amplifiers, the big-brother MICRO8U series packs more power and performance! Power Output: 300W RMS x 1CH @ 2Ω / 175W RMS x 1CH @ 4Ω Input Sensitivity: 0.2-10 Volt Crossover Filter: 40-400Hz (LPF), 24dB Per Octave Slope Frequency Response: 10-350Hz Selectable REM / VOX / DC Turn-On Modes Dimensions: 9" x 4.06" x 1.52" (228.6 x 103.124 x 38.608 mm) Remote Bass Knob Included Disconnected RCA Input Harness Kits Included ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Diamond Audio DES1000.5D 5-Channel 1000W RMS Full Range Class D Amplifier General Features 150 W X 4 /250 X 1 90 W X 4 /150 X 2 300 W X 2/500 W X 1(Ch 5/6 bridged) S/N Ratio (A weighted @1W) -76.7dBA S/N Ratio (A weighted @ FP) -96.7dBA Dimensions: (Remote Included): 11.81" x 7.25" x 2" (299.9mm x 184.2mm x 50.8mm) Latest High-Efficiency Full Range Digital Topology Surface Mount Component Technology with 4-Layer PCB Common Compact Size with Single-Sided Connections and Top Mount Controls Handles HI and LO level input up to 12V Switched Speaker Level Turn On Options (VOX/DC Offset/REM) Remote Bass Level Control Included Fully Variable 35Hz - 350Hz 12dB per Octave Crossovers 0 -180 Degrees of Phase adjustment Bass Boost EQ Up To 12dB ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

  Diamond Audio DES1000.1D DES 1-Channel Full Range Class D Amplifier Diamond Elite DES series amplifiers have been our work horse ever since its introduction. It was engineered and designed from the ground up. Smaller than the previous generation and constructed with the same footprint dimensions for all models, these amplifiers have been engineered to sound even more dynamic and to deliver optimal rated power at all impedance levels! A ll Diamond Elite DES series amplifiers feature various switched speaker level turn on options (VOX/DC Offset/REM), utilize the latest digital chipset technology, and provides installation flexibility and all the controls necessary to fine-tune and improve the sound quality of any car audio system. General Features 800X1 @ 4Ω RMS 1000X1 @ 2Ω and 1Ω RMS S/N: < -100dBA Dimensions: (Remote Included): 11.81" x 2" x 7.25" (300mm x 50.8mm x 185mm) Latest High-Efficiency Full Range Digital Topology Surface Mount Component Technology with 4-Layer PCB Common Compact Size with Single-Sided Connections and Top Mount Controls Handles HI and LO level input up to 12V Switched Speaker Level Turn On Options (VOX/DC Offset/REM) Remote Bass Level Control Included Fully Variable 35Hz - 350Hz 12dB per Octave Crossovers 0 -180 Degrees of Phase adjustment Bass Boost EQ Up To 12dB ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.