Microphone Accessories (75)

Aston Microphones SWIFTSHIELD Shockmount / Pop Filter Bundle SwiftShield combines the Aston Swift shock mount and the Aston Shield pop filter into one bundle to give you the perfect setup for your studio vocal mic. The Aston Swift shock mount takes microphone mounting to the next level of ease. With 2 quick release spring clips designed to fit a wide range of mics, from 40-60mm diameter, mounting your microphone takes seconds. ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cad Audio Stage7 Premium 7-Piece Drum Instrument Mic Pack with Vinyl Carrying Case + 4 Microphones Cables, 12 Feet CAD AUDIO STAGE 7 PREMIUM 7-PIECE DRUM PACK: The CAD Stage7 is a seven-piece drum mic pack that includes one D10 cardioid dynamic mic, three D29 dynamic tom mics, one D19 dynamic snare drum mic, and 2 C9 instrument condensers for high hats, cymbals or overheads. D10 KICK DRUM MICROPHONE: The D10 is a cardioid, moving-coil dynamic microphone designed and carefully equalized for kick drum capture and reinforcement. It also produces excellent results on floor toms, electric guitars, and electric bass cabinets. D19 PERCUSSION MICROPHONE: Specifically designed to capture and reinforce snare drum and other acoustic percussive instruments. The super-cardioid polar pattern provides off-axis rejection crucial for on-stage clarity. The integral drum clip is designed to facilitate rapid, optimal placement. D29 PERCUSSION MICROPHONE: The D29 is a cardioid, moving-coil dynamic microphone designed to capture and reinforce tom-tom drums and other acoustic percussive instruments. Designed with percussion in mind, it also obtains excellent results when used on most electrical and acoustical instruments. C19 INSTRUMENT MICROPHONE: The cardioid polar pattern focuses sensitivity to the front of the microphone while minimizing sources arriving from the rear. Although designed for drum overheads, the C9 also excels when used on classical stringed instruments, acoustic guitars, and folk instruments. Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

CAD Audio D27 SuperCardioid Dynamic Microphone with On/Off Switch The CADLive D27 is a supercardiod dynamic handheld microphone with a QuietTouch on/off switch and neodymium capsule. Superior gain before feedback and silent on/off switch make the D27 a perfect choice for vocal performance where the performer’s control of the mic signal is important. QuietTouch on/off switch Neodymium capsule design ensures a hot signal Durable all metal construction Pattern SuperCardioid Frequency Response 60Hz – 17kHz; Sensitivity -51 dBV (2.8mV @ 1Pa) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Cad Audio Stage7 Premium 7-Piece Drum Instrument Mic Pack with Vinyl Carrying Case + 7 On Stage Microphones Cables, 20 Feet CAD AUDIO STAGE 7 PREMIUM 7-PIECE DRUM PACK: The CAD Stage7 is a seven-piece drum mic pack that includes one D10 cardioid dynamic mic, three D29 dynamic tom mics, one D19 dynamic snare drum mic, and 2 C9 instrument condensers for high hats, cymbals or overheads. D10 KICK DRUM MICROPHONE: The D10 is a cardioid, moving-coil dynamic microphone specifically designed and carefully equalized for kick drum capture and reinforcement. Designed for kick drum, excellent results are also obtained when used on floor toms, electric guitar, and electric bass cabinets. D19 PERCUSSION MICROPHONE: Specifically designed for the capture and reinforcement of snare drum and other acoustic percussive instruments. The super-cardioid polar pattern provides off-axis rejection crucial for on-stage clarity. The integral drum clip is designed to facilitate rapid, optimal placement. D29 PERCUSSION MICROPHONE: The D29 is a cardioid, moving-coil dynamic microphone specifically designed for the capture and reinforcement of tom-tom drums and other acoustic percussive instruments. Designed with percussion in mind, excellent results are also obtained when used on most electrical and acoustical instruments. C19 INSTRUMENT MICROPHONE: The cardioid polar pattern focuses sensitivity to the front of the microphone while minimizing sources arriving from the rear. Although designed for drum overheads, the C9 also excels when used on classical stringed instruments, acoustic guitars, and folk instruments. Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Cad Audio Stage7 Premium 7-Piece Drum Instrument Mic Pack with Vinyl Carrying Case + 7 Microphones Cables, 20 Feet CAD AUDIO STAGE 7 PREMIUM 7-PIECE DRUM PACK: The CAD Stage7 is a seven-piece drum mic pack that includes one D10 cardioid dynamic mic, three D29 dynamic tom mics, one D19 dynamic snare drum mic, and 2 C9 instrument condensers for high hats, cymbals or overheads. D10 KICK DRUM MICROPHONE: The D10 is a cardioid, moving-coil dynamic microphone designed and carefully equalized for kick drum capture and reinforcement. It also produces excellent results on floor toms, electric guitars, and electric bass cabinets. D19 PERCUSSION MICROPHONE: Specifically designed to capture and reinforce snare drum and other acoustic percussive instruments. The super-cardioid polar pattern provides off-axis rejection crucial for on-stage clarity. The integral drum clip is designed to facilitate rapid, optimal placement. D29 PERCUSSION MICROPHONE: The D29 is a cardioid, moving-coil dynamic microphone designed to capture and reinforce tom-tom drums and other acoustic percussive instruments. Designed with percussion in mind, it also obtains excellent results when used on most electrical and acoustical instruments. C19 INSTRUMENT MICROPHONE: The cardioid polar pattern focuses sensitivity to the front of the microphone while minimizing sources arriving from the rear. Although designed for drum overheads, the C9 also excels when used on classical stringed instruments, acoustic guitars, and folk instruments. Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

CAD GXL2200SP Studio Condenser Mic Recording Pack The GXL2200 is great for recording studio vocals, voice-overs, choirs, acoustic instrument, strings, piano, cymbals, or as an overhead microphone. The GXL1200 is best used for recording choirs, orchestras, acoustic instruments, guitar cabinets, strings, piano, cymbals, hi-hat and, also as an overhead microphone. Together, they make a great pair for all of your recording requirements. The GXL2200 is a large diameter, fixed cardioid pattern, condenser microphone. High sensitivity and low distortion make this microphone an ideal candidate for recording, broadcast, sound reinforcement including vocal and instrument applications. The capsule in the GXL2200 features a 1 inch gold vapor deposited diaphragm. The GXL2200 requires standard 48-volt phantom power and comes with a swivel mount that will fit any standard 5/8 inch x 27 threaded microphone stand. The swivel mount can be removed by unscrewing the knurled ring on the bottom of the microphone. The GXL2200 microphones are audio tested and inspected under the direction of CAD Professional Microphones, offering an exceptional level of value. GXL1200 Cardioid Condenser EPF15A Pop Filter Shock mount and mic clip are included ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

CAD Audio CAD-GXL1200 Cardioid Condenser Microphone Cardioid Condenser Microphone GXL1200 Condenser microphone provides a transparent sound reproduction The transformer less design of this instrument microphone allows it to have low distortion and optimum low end frequency response The GXL1200s size accurate sound reproduction and high SPL capability make this a great choice for miking overheads high hats cymbals woodwinds and stringed instruments Specifications. Generating Element Externally Biased Condenser. Polar Pattern Unidirectional Cardioid. Frequency Response 30 Hz 20 kHz. Sensitivity 56dB 0dB1VuBar 1kHz. Impedance Low Less than 200 Ohms. Equivalent Noise Level 14dB Aweighted. Power P24V or P48V Phantom Power. Connector 3 pin XLR Item Includes. Clip windscreen and vinyl pouch included Warranty. 5 Years Polar Pattern: Unidirectional (Cardioid) Frequency Response: 30 Hz - 20 kHz Sensitivity: -56dB 0dB=1V/uBar @ 1kHz Impedance: Low (Less than 200 Ohms) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

CAD Audio GXL1800SP Studio Pack with GXL1800 Side Address & GLX800 Small Diaphragm Mic - Perfect for Studio, Podcasting & Streaming The GX1800SP Studio Pack contains the GXL1800 and GXL800. The GXL1800 Large Format Side Address Microphone captures your performance with a smooth and articulate profile. The GXL1800's high sensitivity allows for distance miking techniques and, combined with a well-behaved cardioid polar pattern, helps to eliminate off-axis environmental noise. The GXL800 small diaphragm condenser delivers class-leading transient response while supplying a true representation of voice or instrument. Includes studio-grade shock mount, mic clip, 2 XLR cables, and foam windscreen. High-sensitivity studio condenser capsule Class-leading transient response (GXL800) Highly effective studio-grade isolation shock mount Includes studio shock mount, tripod stand, XLR cable, and foam windscreen ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

CAD Audio GXL1800 Large Format Side Address Condenser Microphone- Perfect for Studio, Podcasting & Streaming, Black The CAD Audio Large Format Side Address Studio Condenser Microphone captures your performance with a smooth and articulate profile. The GXL1800's high sensitivity allows for distance miking techniques and combined with a well behaved cardioid polar pattern, helps to eliminate off axis environmental noise. Includes studio grade shock mount, tripod stand, XLR cable and foam windscreen. High sensitivity studio condenser capsule Highly effective studio grade isolation shock mount Cardioid pattern resists room noise Includes studio shock mount, tripod stand, XLR cable and foam windscreen ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

CAD AS34 Acousti-Shield Stand Mounted Acoustic Enclosure The Acousti-Shield AS34 was developed as an effective accessory for the audio recording professional. When effectively utilized, it can substantially reduce unwanted reflections, echo flutter and unwanted environmental acoustic interference. A trouble-free design results in an easy to use, highly flexible device, while not sacrificing stand mounted stability. The Acousti-Shield AS34 is constructed from high-quality perforated metal and outfitted with 35mm high density micro cell acoustic foam. The Acousti-Shield AS34 is supplied with mounting hardware to adapt to most microphones - for easy, flexible placement. The Acousti-Shield AS34 is an essential tool for enhanced performance and a vital accessory for the audio recording professional. The Acousti-Shield AS34 reduces reflections, echo and attenuates unwanted environmental acoustic interference. An innovative advanced mounting design allows for maximum positioning stability even when using an economy mic stand. An effective tool for recording audio for video, voiceovers or any audio recording project. ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

CAD Audio AS10 Acousti-Shield Desktop or Stand Mounted Acoustic Enclosure The CAD Audio Acousti-Shield AS10 is a miniature desktop or stand-mounted acoustical shield constructed from high quality 12-gauge perforated metal with 38mm high density acoustic foam. SUSTAINABLE: Created with 12 AWG perforated metal and an extremely dense acoustic foam DEPENDABLE: Constructed with a high-quality design that produces a dry recording environment HEAVY-DUTY: The stand-mounted acoustic enclosure is the perfect desktop microphone isolation system to reduce unwanted background interference The adjustable clamp fits securely to most microphones - for easy, flexible placement ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

  CAD Audio VP1 Pop Filter on 14" Gooseneck The acousti-shield voxpop VP1 was developed as an effective accessory for the home recording professional. When effectively utilized, it can substantially suppress plosives that may be present in a vocal performance. The voxpop’s sonically transparent double-layer acoustic nylon coupled with a trouble-free design results in an easy to use, Highly effective device, while not sacrificing stand mounted stability. From the Manufacturer The acousti-shield voxpop VP1 was developed as an effective accessory for the home recording professional. When effectively utilized, it can substantially suppress plosives that may be present in a vocal performance. The voxpop’s sonically transparent double-layer acoustic nylon coupled with a trouble-free design results in an easy to use, Highly effective device, while not sacrificing stand mounted stability. Substantially suppress plosives that may be present in a vocal performance Trouble-free design results in an easy to use, highly effective device Package Dimensions: 36.83 L x 3.048 H x 19.05 W (centimeters) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.