General Storage Accessories (4)

Hosa DIB-445 SideKick Active Direct Box The Hosa SideKick DIB-445 is a high-quality, value-priced active direct (DI) box for instrument signal routing in professional live sound and studio recording. As an active DI, the SideKick DIB-445 is perfect for environments that require longer cable runs without introducing noise and interference. Its smart design and superior components also make it a great choice for clean, hum-free recording for DAW systems. The SideKick DIB-445 takes the unbalanced high-impedance output of an instrument — guitar, bass, keyboards and more — and converts it to a balanced low impedance signal. Operating via convenient +48V phantom power from your mixer or audio interface, the SideKick DIB-445’s streamlined design features one unbalanced ¼” input, one balanced ¼” thru output, and one balanced XLR output. The SideKick DIB-445 does its job without adding or removing anything from the natural sound of the input source and offers high headroom and low harmonic distortion. Its impressive audio specifications include a near-perfect flat frequency response of 20Hz to 20kHz with only ±0.2dB. Its superbly low noise specification is -95dBu, A-weighted, with THD+N at less than 0.005% at 1kHz, giving it pristine audio quality that meets or exceeds the specs of other DI boxes at twice the price. Its sturdy all-metal housing makes it rugged enough for even the most grueling touring conditions. The SideKick DIB-445’s features include a pad switch (with selections of 0dB, -15dB, and -30dB of attenuation), a ground lift switch to eliminate AC hum caused by ground loops, and a polarity flip switch to combat phase or cancellation issues. It comes with a one-year warranty. General Features: • Direct box for live sound or recording• Perfect for guitar, bass, keyboards, and more• Longer cable runs without added noise or interference• Unbalanced 1/4” input, balanced 1/4” thru output, balanced XLR output• Frequency response: ±0.2dB, 20Hz-20kHz Connectors: 1/4 in TS to 1/4 in TRS and XLR3M Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Hosa DIB-443 Sidekick Passive DI Box The Sidekick Passive DI Box by Hosa Technology makes it easy to connect your guitar, bass, or keyboard directly to a mixing console! It features an isolation transformer that transforms an instrument-level signal to a line-level signal. It works with each of the following: • Electric guitars, basses, and keyboards• Pedal effects and effects processors• Any electronic musical instrument with a mono phone output Use the Sidekick to “go direct” for a pure, clean, noise-free tone that is perfect for Digital Signal Processing (DSP) or throw the INST/LINE switch to LINE position to allow your amp to drive the line for a natural, overdriven tone. Either way, it’s your sound—all of it! Connectors: 1/4 in TS to XLR3M Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Hosa DBK-103 8-pin Mini-DIN to DE9 Synthesizer Host Cable - 3 foot This cable is designed to connect an electronic keyboard with an 8-pin mini-DIN host port to a PC with a DE9 serial communications port. It is compatible with Korg, Roland, and Yamaha electronic keyboards. General Features: • Nickel-plated plugs for rugged durability and efficient signal transfer• Oxygen-Free Copper (OFC) conductors for enhanced signal clarity• Al-Mylar shield for superior high-frequency EMI and RFI rejection Connectors: 8-pin Mini-DIN to DE9 Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Hosa DBK-102B-BULK DB9 Serial Female to Bare Wire Cable - Integrate RS-232/DE9 Devices - 3-Foot Need to integrate RS-232 / DE9 devices into a custom setup? The DBK-102B-BULK is a 3-foot RS-232 to blunt end cable, perfect for connecting your serial data devices directly to custom wiring. It’s ideal for unique serial data applications and specialized installations where standard cables just won’t cut it. This bulk cable provides a reliable RS-232 / DE9 connector on one end, with the other end left unterminated (blunt) for you to easily strip and connect to your specific equipment or projects. Get the flexibility you need for tailored serial communication solutions. General Features: 3-foot length for compact installations RS-232 / DE9 connector for serial data communication Blunt end for custom termination Enables direct connection to custom wiring Perfect for unique serial data applications and custom installations Nickel-plated plugs for rugged durability and efficient signal transfer Oxygen-Free Copper (OFC) conductors for enhanced signal clarity Al-Mylar shield for superior high-frequency EMI and RFI rejection Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.