DJ Turntables, Controllers, Mixers, and other DJ Equipment (7)

Yorkville Sound M810-2, 10+2 Channel Stereo Box Mixer - 2x400W The Yorkville Sound M810-2, 2x 400w, 10 inputs Mixer/Amp lighter weight and small 'footprint' of a box mixer with the tilt-back visibility and channel control access of a desk mixer makes these new 'wedge' mixers an ideal high power, high quality powered mixer solutions. High-powered high-efficiency class-H power amplifiers, newly designed input strips, on-board DSP, a new, more effective master EQ section and ten very useful and usable input channels complete the new 'wedge' mixer packages. Product Specification:   Number of Channels: 10 Mono Channel EQ: Low, Mid, High Stereo Channel EQ: Low, Mid, High Channel Effects: All Channels Monitors Effects:  Yes Balance Controls: Ch. 7 - 10 Pan Controls: Ch. 1 - 6 Channel Overload Protection: Ch. 1 - 6 Inputs - XLR (bal): 8 Inputs - 1/4": 10 Inputs - RCA (unbal): 1 Pair Mute Switches: Global 1 - 8 Activity / Solo LED: Trim Set Ch. 1 - 6 Clip / Mute LED: All Channels Phantom Power: 48V + LED Indicator Internal Effects: 24 Bit stereo, 16 Effects with Parameter Pot Auxiliary Sends: Effect - Monitor Effects Send: Yes Effects Return: Internal Effects Return to Main: Yes Effects Return to Monitor: Yes Reverb / Effects Footswitch: Yes Record Outputs: Stereo RCA Pair Max Gain to Line Out -Mic Input (dB): 84 Max Gain to Line Out -Line Input (dB): 82 Master EQ -1 (type/Channels/Range -dB): Graphic 9 band (160hz-6.3khz) +2 band Shelving Monitor EQ -1 (type/Channels/Range-dB): Graphic 9 band (160hz-6.3khz) +2 band Shelving Main Outputs (Line Level): 2 x 1/4inch TRS Main Amp Inputs (Line Level): 2 x 1/4inch TRS Monitor Outputs (Line Level): 1 x 1/4inch TRS Outputs - Amp A - 1/4" Jacks:  2 Outputs - Amp A - Speakon 4-pin: 1 Outputs - Amp B - 1/4" Jacks: 2 Outputs - Amp B - Speakon 4-pin: 1 Mixer - Signal to Noise Ratio (dB): 105 Mixer - Freq Resp (Tone and EQ Flat,2dB): 20 - 20,000 Mixer- Input Ref Noise to line out @150 Ohms(dBv): -119 Mixer THD (Main out w/ -10dB input): 0.0001 Amp A-Power Output@8 Ohms (0.1 PER THD 1kHz): 250 Amp A - Power Output @ 4 Ohms: 400 Amp A - Power Output –other: 400 @ 2 ohms Amp B-Power Output@8 Ohms (0.1 PER THD 1kHz): 250 Amp B - Power Output @ 4 Ohms: 400 Amp B - Power Output –other: 400 @ 2 ohms THD - 1kHz (dB): 0.001 THD - 20Hz-20kHz (dB): 0.005 Hum and Noise (un / Aweight -dB): 0.94392523364486 Typical crosstalk -1 kHz (dB-:  better than -60db Input Impedance - Bal/Unbal (Ohms): 20k / 10k ohms Input Sesitivity (Vrms Sine): 1.4 CMRR @ 60Hz (min/typ): -37db / -60db Max Votage Gain (dB): 29 Power Consumption (typ/max): 4.2A @ 60Hz / 2.2A @ 50Hz Protection: Thermal, Short Circuit, Current, Clip Cooling: 2 x 80mm Fans Transformer Type: Toroidial Finish: Grey and Black Powder Coat Chassis Construction: Steel and Aluminum Rackmount: Yes (Kit Available - 6U) Other Features: Tiltback or Upright Wedge Angles Dimensions (DWH, inches): 11.1 x 18.6 x 11 Dimensions (DWH, cm): 28 x 47 x 28 Weight (lbs/kg): 28.2 / 12.8 Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 MR DJ CDMX10 5-pin DMX lighting cable 10' DMX 5-Pin XLR Pro Stage DJ Lighting Cable The 10' MR DJ CDMX10 5-pin DMX Cable is designed to connect DMX controllers, DMX lights, and other 5-pin DMX devices to stage lighting or effect systems for live performance applications. The cables are constructed of 22-gauge stranded tinned copper conductors insulated by polyethylene within a PVC jacket. We use DMX cables for lighting. Wires do not carry an audio signal; they carry information or data communicating changes between lights and the source.  General Features: Connectors: XLR5M to XLR5F For Connecting DMX Lights and Effects Stranded Tinned Copper Conductors PVC Jacket Impedance: 110-ohm Conductors: 2 OFC Connector 1: 5-Pin DMX XLR Male Connector 2: 5-Pin DMX XLR Female Length: 10’ Material: PVC Type: Digital Cable Gauge: 22 Gauge Stranded High Quality 5 Pin Male to Female Stage Light Cable for DMX Signal Transmission Designed for Accurate Transmission of Digital Audio and DMX Lighting Control Data Safety, Shielding, and Prevent Transmission Interferences Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 MR DJ CDMX10 5-pin DMX lighting cable 10' DMX 5-Pin XLR Pro Stage DJ Lighting Cable The 10' MR DJ CDMX10 5-pin DMX Cable is designed to connect DMX controllers, DMX lights, and other 5-pin DMX devices to stage lighting or effect systems for live performance applications. The cables are constructed of 22-gauge stranded tinned copper conductors insulated by polyethylene within a PVC jacket. We use DMX cables for lighting. Wires do not carry an audio signal; they carry information or data communicating changes between lights and the source.  General Features: Connectors: XLR5M to XLR5F For Connecting DMX Lights and Effects Stranded Tinned Copper Conductors PVC Jacket Impedance: 110-ohm Conductors: 2 OFC Connector 1: 5-Pin DMX XLR Male Connector 2: 5-Pin DMX XLR Female Length: 10’ Material: PVC Type: Digital Cable Gauge: 22 Gauge Stranded High Quality 5 Pin Male to Female Stage Light Cable for DMX Signal Transmission Designed for Accurate Transmission of Digital Audio and DMX Lighting Control Data Safety, Shielding, and Prevent Transmission Interferences Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 MR DJ CDMX10 5-pin DMX lighting cable 10' DMX 5-Pin XLR Pro Stage DJ Lighting Cable The 10' MR DJ CDMX10 5-pin DMX Cable is designed to connect DMX controllers, DMX lights, and other 5-pin DMX devices to stage lighting or effect systems for live performance applications. The cables are constructed of 22-gauge stranded tinned copper conductors insulated by polyethylene within a PVC jacket. We use DMX cables for lighting. Wires do not carry an audio signal; they carry information or data communicating changes between lights and the source.  General Features: Connectors: XLR5M to XLR5F For Connecting DMX Lights and Effects Stranded Tinned Copper Conductors PVC Jacket Impedance: 110-ohm Conductors: 2 OFC Connector 1: 5-Pin DMX XLR Male Connector 2: 5-Pin DMX XLR Female Length: 10’ Material: PVC Type: Digital Cable Gauge: 22 Gauge Stranded High Quality 5 Pin Male to Female Stage Light Cable for DMX Signal Transmission Designed for Accurate Transmission of Digital Audio and DMX Lighting Control Data Safety, Shielding, and Prevent Transmission Interferences Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Absolute 10'' Inch Car Audio Speaker Sub-Woofer Subwoofer Metal Black Waffle Grill Cover This is the best way to protect your subs. This is for one 10-inch subwoofer Grill with hardware (4 brackets w screws). Heavy-duty grill. Do not Flex back and forth when pushed by hand like the cheaper ones. Standard waffle design. General Features: ONE -10 Inch Grill & Installation Hardware Waffle Design Universal Fitment For the Protection of Subwoofers 10" Fits Woofers and Speakers with an Overall Diameter of 10" Protects Speaker Cones from Accidental Damage Provides an Attractive Look for Speaker Cabinets Mounts on Top of Speakers with Grill Mounting Clamps Included: (4) Molded ABS Mounting Clamps and Steel Screws Secure Fastening Truss Head Self-Tapping Screws Extra Long 1.25" Screws for Thick-Rimmed Speakers Cushioned Black Rubber Surround Heavy-Duty Lightweight Steel Construction Protect your subwoofer from cuts, rips, tears, and dents Keep your subwoofer looking amazing while keeping it safe The outer Diameter of the grill is exactly 10." Mesh Square Openings: 1/2" x 1/2" Color: Black Lifetime Warranty Universal 360 Degree Rotation and Swivel Mobile Bracket Holder Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ CSMSM-100 100 Feet PRO PA DJ Speakon Male to Speakon Male Speaker Cable The Speakon speaker cable is made of Premium PVC-85P and Copper Wire, making it lightweight but durable for a long time. The audio cord is made with industrial-grade construction and delivers premium performance without noise, static, or buzzing; you will never regret buying that. The stereo cable features black and blue colored male connectors at each end with spring-loaded lock release latches. An accurate and dependable twist lock latching system called "Quick-Lock" can carry a high current. Perfect for high-power loudspeaker applications: stage monitors, house speakers, subwoofers, etc.  General Features: Speakon Male to Speakon Male 100 Foot Speaker Cable High-Quality Stranded Dual Conductor Wire For use between power amplifier & speaker cabinet or to link multiple cabinets together Neutrik-style Twist-Lock Connector Product type: Speakon to Speakon cable Speakon connector Jacket: shielded PVC wrapped Conductor Type: 2 conductor High performance PVC Wrapped Durable Material Male Speakon to Speakon connection 100% brand new with high quality 100 Feet Extra flexibility for ease of use/storage Product Dimensions: 12 x 6 x 8 inches Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

MR DJ Replacement Speaker for QSC XD-000070-00 15" Woofer for E15 Speaker 1500W Mr. Dj COMDW3000 15 Inches Pro PA DJ Black Raw Woofer SubwooferDesigned for high-power applications in PA speaker mains, DJ touring speakers, sub-woofers, and bass guitar systems. Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.