Completed Products (7413)

MR DJ PA112 12" 500-Watt Universal PA/DJ Raw Woofer Subwoofer, Black/RedThey are designed for high-power applications in PA speaker mains, DJ touring speakers, sub-woofers, and bass guitar systems. The magnet motor structure is new and designed with a backplate and pole piece forged from a single massive block of low-carbon steel. An extended pole piece beyond the front plate improves magnetic linearity and voice coil cooling.This is a universal product and works with all DJ, Pro Audio, Home Audio Car Audio equipment such as JBL, Absolute, Electro-voice, EV, Cerwin Vega, Peavey, JBL Pro, Tascam, Numark, Novation, Samson, M-Audio, Lexington, Soundcraft, CAD Audio, AKG, Korg, Bose, AKAI, American DJ, American Audio, Beat Port, Cortex, Gemini, Odyssey, Pioneer DJ, Peavey, Stanton, Casio, Yamaha, Lexicon, Tascam, Alpine, Kicker, Kenwood, Pioneer, Sony, JVC, JBL, Boss Audio, Diamond Audio, Hifonics, Metra, Global Truss, Electrovoice, Chauvet, Panasonic, Harman, Pyle, Cerwin Vega, and Rockford Fosgate. American TerminalGeneral Features 12" Pro DJ Subwoofer 12" Single Polypropylene cone woofers Butyl rubber surround ensures high excursion and long-term durability Stamped steel frame keeps components in perfect alignment 2" High-Temperature CCAW High SPL Voice Coil Dual Nickel Plated Banana Plug Terminals Linear Progressive Conex Spiders Power Handling Peak: 500 watts Power Handling RMS: 250 watts Paper cone woofer Fiber Reinforced Ultra Stiff Paper Composite Cone Cloth edge surround 40oz. Magnet structure Frequency response: 60 - 7000Hz Sensitivity: 92dB @ 1w/1m Impedance: 8 Ohms Authorized Internet Dealer 1-year Manufacturer's warranty Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

MR DJ PA108 8" 300-Watt Universal PA/DJ Raw Woofer Subwoofer, Black/Red They are designed for high-power applications in PA speaker mains, DJ touring speakers, sub-woofers, and bass guitar systems. The magnet motor structure is new and designed with a backplate and pole piece forged from a single massive block of low-carbon steel. An extended pole piece beyond the front plate improves magnetic linearity and voice coil cooling. This is a universal product and works with all DJ, Pro Audio, Home Audio Car Audio equipment such as JBL, Absolute, Electro-voice, EV, Cerwin Vega, Peavey, JBL Pro, Tascam, Numark, Novation, Samson, M-Audio, Lexington, Soundcraft, CAD Audio, AKG, Korg, Bose, AKAI, American DJ, American Audio, Beat Port, Cortex, Gemini, Odyssey, Pioneer DJ, Peavey, Stanton, Casio, Yamaha, Lexicon, Tascam, Alpine, Kicker, Kenwood, Pioneer, Sony, JVC, JBL, Boss Audio, Diamond Audio, Hifonics, Metra, Global Truss, Electrovoice, Chauvet, Panasonic, Harman, Pyle, Cerwin Vega, and Rockford Fosgate. American Terminal General Features 8" Pro DJ Subwoofer 8" Single Polypropylene cone woofers Butyl rubber surround ensures high excursion and long-term durability Stamped steel frame keeps components in perfect alignment Power Handling Peak: 300 watts Power Handling RMS: 150 watts Paper cone woofer Cloth edge surround 20oz. Magnet structure Frequency response: 67 - 8,000Hz Sensitivity: 90dB Authorized Internet Dealer 1-year Manufacturer's warranty Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-S69 6x9" 600 Watt Car Audio Speakers+BBX-T600 2 Channel Amplifier+ Absolute KIT4 Amp Kit Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier This new BBX amplifier gives you Alpine power performance at a fantastic price. It is designed to fit easily in virtually any system and delivers high-output power and exceptional performance for its class. It is a great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. With Bass EQ, you can maximize your system's performance and get even more powerful bass. General Features: Alpine BBX-T600 Class-A/B 2-ohm Stable 2-Channel Amplifier 50 Watts @ 4 Ohm x 2 Channel 70 Watts @ 2 Ohm x 2 Channel 130 Watts @ 4 Ohm x 1 Channel Bridged Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on Two or Mono channel operation One pair of preamp outputs to connect multiple amplifiers 3-way protection circuitry (thermal, overload, and short speaker protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 95dB Variable high-pass filter: 80 - 1200 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 20A x 1 Dimensions: 9.84"W x 9.44"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Weight: 5.00lbs What's in the BBX-T600 package: BBX-T600 owner's manual Two Channel amplifier Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Alpine S2-S69 Next-Generation S-Series 6"x9" 2-way car speakers 6"x9" 2-way speakers polypropylene/glass fiber/mica woofer cone with specialized rubber surround 1" silk dome tweeter handles up to 85 watts RMS (260 watts peak power) frequency response: 55-40,000 Hz sensitivity: 90 dB grilles not included What's in the box: Two 2-way speakers 2 Bottom mount brackets Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other) Eight 1-1/8" Screws Eight M4x60mm Machine screws (each screw has a lock washer attached) Eight M4 Nuts 8 Speed clips 16 Flat washers owner's manual 8 Spacers Warranty information On-line product registration information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

PAC SWI-RC1 Steering Wheel Control Interface retain the factory steering wheel audio controls You can control functions such as volume, mode, and track on most Pioneer, Sony, JVC, Alpine, Clarion, Kenwood, Blaupunkt, Jensen, Dual, Advent, OEM, Valor, and Visteon radios equipped with a wired remote control input. Retains steering wheel control functions when replacing the factory radio Retains programming even if the vehicle's battery is disconnected General Features: Quick and easy pre-programmed button function by DIP switch selection Works on Analog (resistive) and Data SWC systems For vehicles with CAN-Bus, GMLAN, CLASS II, LIN-Bus, I-BUS, or analog SWC Supports classic, SWI-RC style button programming Customizable button functions (short press/long press/button reassignment) Provides 2 amp, 12volt accessory output (CAN-Bus, LAN, and Class II applications) Compatible with all late-model brands of radios with 3.5mm or two-wire connections To be compatible, the aftermarket radio MUST be equipped with a wired remote input (3.5mm headphone-style jack or Blue/Yellow wire) (e.g., a port or wire on the back of the radio labeled W/R, REM, Wired Remote, Remote, Rem Cont, etc.). If the radio does not have a wired remote input, you must use the SWI-X. The following Kenwood models are not compatible: KDC-X598, KDC-BT318U, KDCBT-758-HD, KDCBT-558U, and KDC-X798. These models must be used with the SWI-CP5. Clarion model CZ500 does not support remote Bluetooth controls JVC model numbers KW-NT1 and KW-NT3HDT do not support Presets Up and Down from steering wheel controls Pioneer AVIC-Fxxx radios do not interpret radio preset-seeking commands. This is a limitation of the radio, not the SWI-RC. There is no correction for this unless it comes from Pioneer. Pioneer radios with Bluetooth features, the steering wheel controls will not adjust the phone call volume. The phone call volume must be adjusted on the face of the radio. This is a limitation of the radio, not the SWI-RC. There is no correction for this unless it comes from Pioneer. Only the AVIC-Z110BT, Z120BT, Z130BT, Z140BH, and the AVIC-X920BT, X930BT, and X940BT will support the Voice Recognition function via wired remote input. Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

PAC SWI-CP2 Steering Wheel Control Interface retain factory steering wheel audio controls Control functions such as volume, mode, and track on most Pioneer, Sony, JVC, Alpine, Clarion, Kenwood, Blaupunkt, Jensen, Dual, Advent, OEM, Valor, and Visteon radios equipped with a wired remote control input. Retains steering wheel control functions when replacing the factory radio Retains programming even if the vehicle's battery is disconnected General Features: Quick and easy pre-programmed button function by DIP switch selection Works on Analog (resistive) and Data SWC systems For vehicles with CAN-Bus, GMLAN, CLASS II, LIN-Bus, I-BUS, or analog SWC Supports classic, SWI-RC style button programming Customizable button functions (short press/long press/button reassignment) Provides 2 amp, 12volt accessory output (CAN-Bus, LAN, and Class II applications) Compatible with all late-model brands of radios with 3.5mm or two-wire connections The aftermarket radio MUST be equipped with a wired remote input (3.5mm headphone style jack or Blue/Yellow wire) to be compatible (ex. a port or wire on the back of the radio labeled W/R, REM, Wired Remote, Remote, Rem Cont, etc.). If the radio does not have a wired remote input, you will need to use the SWI-X. Not compatible with Kenwood models: KDC-X598, KDC-BT318U, KDCBT-758-HD, KDCBT-558U & KDC-X798. These models must be used with the SWI-CP5. Clarion model CZ500 does not support remote Bluetooth controls JVC model numbers KW-NT1 and KW-NT3HDT do not support Presets Up and Down from steering wheel controls Pioneer AVIC-Fxxx radios do not interpret radio preset-seeking commands. This is a limitation of the radio, not the SWI-RC. There is no correction for this unless it comes from Pioneer. Pioneer radios with Bluetooth features, the steering wheel controls will not adjust the phone call volume. The phone call volume must be adjusted on the face of the radio. This is a limitation of the radio, not the SWI-RC. There is no correction for this unless it comes from Pioneer. Only the AVIC-Z110BT, Z120BT, Z130BT, Z140BH, and the AVIC-X920BT, X930BT, and X940BT will support the Voice Recognition function via wired remote input. Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine BBX-T600 300W 2 Channel Amplifier with Pair of S-W12D4 12 Inch SubwoofersThis new BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system. Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass.The S-W12D4 12" sub can handle up to 600 watts RMS so that you can drive it hard without any worries. The tough Kevlar-treated cone stays rigid under pressure, while its rubber High Amplitude Multi-Roll (HAMR) surround enables maximum excursion for impressive performance.Product Highlights: Class-A/B 2-ohm Stable 2-Channel Amplifier Thermal Management Control DC-DC PWM Power Supply Pulse Width Modulated MOSFET power supply Current Protection: Over-Current, Over-Voltage, and Thermal Protection Green/red Status LED Heavy-duty aluminum alloy heat-sink Power Handling: Total Max Power: 300W Per Channel into 4ohms (≤1%THD+N): 2 x 50W Per Channel into 2ohms (≤1%THD+N): 2 x 70W Bridged into 4ohms (≤1%THD+N): 1 x 130W Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB) Power Requirements: 14.4 V DC (11 V to 16 V) Input Sensitivity: 0.2 - 8.0 V Speaker Impedance: 4 or 2 Ω Signal to Noise: S/N Ratio 95 dB Variable high-pass filter: 80 - 1200 Hz Variable low-pass filter: 50 - 500 Hz Alpine 2 Pack S-W12D4 S-Series 12" Subwoofer 12" subwoofer with dual 4-ohm voice coils Kevlar reinforced pulp cone with HAMR Santoprene rubber surround Max RMS Power Capacity: 600W RMS (300 watts per coil) Peak Power Capacity: 1800W Peak Power Frequency response: 26-200 Hz Top-mount depth: 5-1/16" This new BBX amplifier offers Alpine power performance at an amazing price. It’s also designed to fit easily in virtually any system. Performance With Bass EQ, you can maximize your system's performance and get even more powerful bass. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine BBX-F1200 Amplifier with Two Pair Of Alpine S2-S40 4" Coax Speakers & Absolute KIT4 4 Gauge Wiring Kit & TW-600 600 Watts High-Efficiency Dome Tweeter & BT1700 General Use 0.18mm x 3/4-Inch x 20Yd Electrical Tape (Black) & Universal 360 Degree Rotation and Swivel Mobile Bracket Holder This bundle includes an Alpine BBX-F1200 4-Channel V-Power Amplifier, an 8-Gauge Wiring Kit, and two Alpine S-S40 S-Series 4-inch Coaxial 2-Way Speakers. It also includes an Absolute TW-600 600 Watts MAX High-Efficiency Dome Tweeter with a Built-In Crossover.Alpine BBX-F1200 - 4-Channel Amplifier 4-channel power amplifier 4-channel 600 wattsThis amp delivers high output power and exceptional performance for their class. It's a great way to expand your sound system on a limited budget.Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass. General Features: Amplifier Type: Class-A/B Channel Design: 4/3/2 Channel Total Max Power: 600W Per Channel into 4ohms (1%THD+N): 4 x 50W Per Channel into 2ohms (1%THD+N): 4 x 70W Bridged into 4ohms (1%THD+N): 2 x 130W Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB) Footprint: 330 mm x 52 mm x 240 mm Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine S2-S40 S-Series 4-inch Coaxial 2-Way Speakers (pair) - Contains 4x6" Adapter Plate. General Features: 2x 4" 2-way speakers carbon-fiber-reinforced plastic woofer cone with specialized rubber surround 3/4" silk dome tweeter handles up to 45 watts RMS (140 watts peak power) frequency response: 97-22,000 Hz grilles not included warranty: 1 year 4x 2-way speakers 4x 4x6 Adapter brackets 4x 12" Lengths of speaker wire (each has quick slides on one end and bare wire on the other) Eight 3/4" Screws Eight 5/16" Screws Eight 1/4" Screws 8 Speed clips 8 Spacers 2 Adhesive-gaskets Warranty information Online product registration information Important Notice sheet Absolute KIT4 4 Gauge Amp Kit Absolute TW-600 600 Watts MAX High-Efficiency Dome Tweeter with Built-In Crossover (Pair) Absolute USA BT1700 General Use 0.18mm x 3/4-Inch x 20Yd Electrical Tape (Black) Universal 360 Degree Rotation and Swivel Mobile Bracket Holder Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A60M 1-Channel 600 Watts S-Series Monoblock Class-D Amplifier + Absolute KIT4OR 4 Gauge Complete Amplifier Kit Package Includes: 1 Alpine S2-A60M, 1 Absolute KIT4 Amplifier Kit 4 Gauge Alpine S2-A60M 1-Channel 600 Watts S-Series Monoblock Class-D Amplifier General Features: Alpine S-Series Mono Power Amplifier - S2-A60M 400W x 1 @ 4 Ohms RMS Power Output 600W x 1 @ 2 Ohms RMS Power Output S/N ratio: >85dB (ref: 1W into 4 ohms), >105dB (ref: rated power into 4 ohms) Remote bass knob compatible (requires RUX-KNOB.2, sold separately) CTA-2006 compliant THD+N ≤ 0.03% (ref 1W info 4 ohm) Frequency Response: 10HZ-400Hz (+/- 3 dB) Damping Factor: > 1000 variable low-pass filter (50-400 Hz, 24 dB/octave) variable bass boost (0-12 dB at 50 Hz) Speaker-level inputs (Speaker Wire to RCA Adapter Required) Preamp Inputs Improved heat sink and protection circuit design that eliminates thermal shut-down for dependable music playback Remote Sensing automatic turn-on when using speaker-level inputs Approximate Weight: 11 lbs Fuse Rating: fuse rating: 30A x 2 Dimensions: 8” W x 8” H x 2.25” D Authorized Internet Dealer 1-year Manufacturer's Warranty Absolute KIT4OR Complete PRO Marine Auto Car RV 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with Orange Accent Color Scheme Today, I would recommend KIT4 for all DIY and installers. This wiring kit has an easy-to-install AGU fuse holder and some perfect wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels and works great and is much better than the typical 18 AWG wire most kits would include. General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of 4 AWG high current power cable Three ft. of 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire Six ft. of split loom tubing 1 Gold-plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine BBX-F1200 600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier This new BBX amplifier gives you Alpine power performance at a fantastic price. And they’re designed to fit easily in virtually any system. High Power, Great Value This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget. High Pass and Low Pass Filters These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass. General Features: Alpine BBX-F1200 Class-A/B 2-ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 50 watts x 4 channel 2 ohms: 70 watts x 4 channel 1 ohm: ------------N/A------------ Bridged, 4 ohms: 130 watts x 2 channel Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on 4/3/2 or channel operation 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 95dB Variable high-pass filter: 50 - 500 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 40A x 1 Dimensions: 9.4"W x 12.9"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty What's in the BBX-F1200 package: BBX-F1200 owner's manual Four-Channel amplifier Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine BBX-F1200 4 Channel Amp+ 2 Pair Alpine S2-S69 6x9 Coaxial Speakers + Absolute KIT4 Amp Kit Alpine BBX-F1200 600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier This new BBX amplifier gives you Alpine power performance at a fantastic price. And they’re designed to fit easily in virtually any system. High Power, Great Value This amp delivers high output power and exceptional performance for their class. It's a great way to expand your sound system on a limited budget. High Pass and Low Pass Filters These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass. General Features: Alpine BBX-F1200 Class-A/B 2-ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 50 watts x 4 channel 2 ohms: 70 watts x 4 channel 1 ohm: ------------N/A------------ Bridged, 4 ohms: 130 watts x 2 channel Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on 4/3/2 or channel operation 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 95dB Variable high-pass filter: 50 - 500 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 40A x 1 Dimensions: 9.4"W x 12.9"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty. Alpine S2-S69 260 Watts S-Series 6x9" 2-Way Hi-Res Car Audio Coaxial Speakers Experience Alpine's next-generation S-Series loudspeakers' rich detail and sonic excellence — now featuring Hi-Res Audio for the first time. The S-Series continues to establish the sound quality and value benchmark by producing impressively detailed loudspeakers that accurately represent true studio-level hi-resolution audio faithful across the entire frequency bandwidth. Alpine innovation continues with all-new technology and engineering in the construction and materials adopted in the new S-Series.  The exclusive design composite glass fiber hybrid cone is highly rigid and lightweight, which further unites with Alpine’s patented HAMR surround to achieve increased control and excursion of the woofer diaphragm, resulting in pure, punchy sound and powerful bass at high SPL. General Features: 6" x 9" 2-way Coaxial Car Speakers Peak Power Handling: 520 watts per pair / 260 watts each RMS Power Handling: 170 watts per pair / 85 watts each Polypropylene cone material Rubber speaker surround High Amplitude Multi-Roll surround technology HI-RES Certified 1" Silk Dome Tweeters Large Ferrite magnet structure Top-mount Depth: 3" Cutout Dimensions: 5-29/32 x 8-3/4  Impedance: 4 ohms Frequency Response: 65 - 40000 Hz Sensitivity: 88 dB Authorized Internet Dealer MFR #: S2-S69 1-year Manufacturer's Warranty What is in the S2-S69 packages: S2-S69 owner's manual Two 2-way speakers 2 Bottom mount brackets Two 12" Lengths of speaker wire Eight 1-1/8" Screws Eight M4x60mm Machine screws Eight M4 Nuts 8 Speed clips 16 Flat washers 8 Spacers Warranty information Online product registration information Absolute KIT4 Complete PRO Marine 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with Red Accent Color Scheme Installing a car amplifier is already enough of a job without worrying about where to find the correct wire and installation accessories. You might not know that some companies are playing gimmicks, and you could get ripped off! Today, I recommend KIT4 for all DIY and installers. This wiring kit has an easy-to-install AGU fuse holder and some perfect wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels great, works great, and is much better than the typical 18 AWG wire most kits would consist of. General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of red 4 AWG high current power cable Three ft. of black 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire Six ft. of split loom tubing 1 Gold-plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine BBX-F1200 4 Channel Amp+ 2 Pair Alpine S2-S69 6x9 Coaxial Speakers + Absolute KIT4 Amp Kit Alpine BBX-F1200 600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier This new BBX amplifier gives you Alpine power performance at a fantastic price. And they’re designed to fit easily in virtually any system. High Power, Great Value This amp delivers high output power and exceptional performance for their class. It's a great way to expand your sound system on a limited budget. High Pass and Low Pass Filters These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass. General Features: Alpine BBX-F1200 Class-A/B 2-ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 50 watts x 4 channel 2 ohms: 70 watts x 4 channel 1 ohm: ------------N/A------------ Bridged, 4 ohms: 130 watts x 2 channel Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protection (red) indicators Soft start turn-on 4/3/2 or channel operation 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 95dB Variable high-pass filter: 50 - 500 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 40A x 1 Dimensions: 9.4"W x 12.9"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty. Alpine S2-S69 260 Watts S-Series 6x9" 2-Way Hi-Res Car Audio Coaxial Speakers Experience Alpine's next-generation S-Series loudspeakers' rich detail and sonic excellence — now featuring Hi-Res Audio for the first time. The S-Series continues to establish the sound quality and value benchmark by producing impressively detailed loudspeakers that accurately represent true studio-level Hi-Resolution audio faithful across the entire frequency bandwidth. Alpine innovation continues with all-new technology and engineering in the construction and materials adopted in the new S-Series.  The exclusive design composite glass fiber hybrid cone is highly rigid and lightweight, which further unites with Alpine’s patented HAMR surround to achieve increased control and excursion of the woofer diaphragm, resulting in pure, punchy sound and powerful bass at high SPL. General Features: 6" x 9" 2-way Coaxial Car Speakers Peak Power Handling: 520 watts per pair / 260 watts each RMS Power Handling: 170 watts per pair / 85 watts each Polypropylene cone material Rubber speaker surround High Amplitude Multi-Roll surround technology HI-RES Certified 1" Silk Dome Tweeters Large Ferrite magnet structure Top-mount Depth: 3" Cutout Dimensions: 5-29/32 x 8-3/4  Impedance: 4 ohms Frequency Response: 65 - 40000 Hz Sensitivity: 88 dB Authorized Internet Dealer MFR #: S2-S69 1-year Manufacturer's Warranty What is in the S2-S69 packages: S2-S69 owner's manual Two 2-way speakers 2 Bottom mount brackets Two 12" Lengths of speaker wire Eight 1-1/8" Screws Eight M4x60mm Machine screws Eight M4 Nuts 8 Speed clips 16 Flat washers 8 Spacers Warranty information Online product registration information Absolute KIT4 Complete PRO Marine 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with Red Accent Color Scheme Installing a car amplifier is already enough of a job without worrying about where to find the correct wire and installation accessories. You might not know that some companies are playing gimmicks, and you could get ripped off! Today, I recommend KIT4 for all DIY and installers. This wiring kit has an easy-to-install AGU fuse holder and perfect wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels great, works great, and is much better than the typical 18 AWG wire most kits would consist of. General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of red 4 AWG high current power cable Three ft. of black 4 AWG ground cable 15 ft. of RCA triple-shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire Six ft. of split loom tubing 1 Gold-plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.