Car Audio & Video Packages & Bundles (761)

Rockford Fosgate P1572 5x7" 120W + P1692 6x9" 150W 2 Way Car Speakers Rockford Fosgate Punch P1692 Car Speaker 300W Peak, 150W RMS 6x9" 2-Way Punch Series Full Range Coaxial Speakers The P1692 is a 6”x9” 2-way full-range speaker rated at 65 watts RMS designed for fanatics needing a quality factory replacement driver. Includes two speakers with grilles, integrated high-pass crossovers, and mounting hardware.Fanatics that need a great-sounding speaker to replace factory-installed garbage will certainly benefit from this Punch series full-range speaker. The P1692 offers a Flex Fit™ basket to ensure compatibility with oddly shaped factory speaker locations and an ICC (Integrated Concealed Crossover), eliminating the need to mount any black boxes. General Features: 6" x 9" Punch Series 2-way Full Range Car Speakers FlexFit basket design Power Handling: Peak: 300 watts per pair / 150 watts each RMS: 150 watts per pair / 75 watts each Recommended Power Range: 15 - 75 watts RMS per channel VAST (Vertical Attach Surround Technique) butyl Rubber surround Mica-injected, polypropylene cone woofer OEM adapter plate included PEI dome tweeter Butyl rubber surround 3/4" Treated PEI dome tweeter StampCast frame structure Two 1/2" PEI Dome tweeters Built-in 3-way crossover 4 ohms impedance Cutout Dimensions: 5.77" x 8.51" Kapton voice coil former Cold-rolled steel baskets reduce unwanted resonance Injection-molded mineral-filled polypropylene cone Includes grill and mounting hardware Frequency Response: 60 - 22,000 Hz Top-mount Depth: 3.07" Sensitivity: 91dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the P1692 package: P1692 owner's manual Two 2-way 6X9" speakers 2 Grilles 3mm Allen head bit 8 Speed clips Installation & Operation manual Rockford Fosgate Punch P1572 240W Peak (120W RMS) 5" x 7" / 6" x 8" Punch Series 2-way Coaxial SpeakersThe P1572 is a 5”x7” 2-way full-range speaker rated at 60 watts RMS designed for fanatics needing a quality factory replacement. Includes two speakers with adapter plates, integrated high-pass crossovers, and mounting hardware.General Features: 5" x 7" Punch Series 2-Way Car Speakers Power Handling: Peak: 240 watts per pair / 120 watts each RMS: 120 watts per pair / 60 watts each Recommended power range: 10 - 60 watts RMS per channel Mineral-filled and polypropylene injection molded cone Butyl rubber surround PEI dome tweeter ICC Crossover hides the crossover for installation without the hassle and a clean look VAST surround provides up to 25% more surface area of the cone Includes an OEM 6" x 8" adapter plate for simple installation 4 ohms impedance Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Two 5x7 Two-way speakers Two 6x8 Adapter brackets Eight 1-1/4" Allen head screws 3mm Allen head bit 8 Speed clips Installation/Operation manual (English/ French/ Spanish/ German/ Italian) Rockford Fosgate P1572 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

    2 Rockford Fosgate P1692 6x9 150W Speakers + 2 Absolute Angled 6x9 Speaker Box Rockford Fosgate Punch P1692 Car Speaker 300W Peak, 150W RMS 6x9" 2-Way Punch Series Full Range Coaxial Speakers + 2 Absolute Angled 6x9 Speaker BoxThe P1692 is a 6”x9” 2-way full-range speaker rated at 65 watts RMS designed for fanatics needing a quality factory replacement driver. Includes two speakers with grilles, integrated high-pass crossovers, and mounting hardware.Fanatics that need a great-sounding speaker to replace factory-installed garbage will certainly benefit from this Punch series full-range speaker. The P1692 offers a Flex Fit™ basket to ensure compatibility with oddly shaped factory speaker locations and an ICC (Integrated Concealed Crossover), eliminating the need to mount any black boxes. General Features: 6" x 9" Punch Series 2-way Full Range Car Speakers FlexFit basket design Power Handling: Peak: 300 watts per pair / 150 watts each RMS: 150 watts per pair / 75 watts each Recommended Power Range: 15 - 75 watts RMS per channel VAST (Vertical Attach Surround Technique) butyl Rubber surround Mica-injected, polypropylene cone woofer OEM adapter plate included PEI dome tweeter Butyl rubber surround 3/4" Treated PEI dome tweeter StampCast frame structure Two 1/2" PEI Dome tweeters Built-in 3-way crossover 4 ohms impedance Cutout Dimensions: 5.77" x 8.51" Kapton voice coil former Cold-rolled steel baskets reduce unwanted resonance Injection-molded mineral-filled polypropylene cone Includes grill and mounting hardware Frequency Response: 60 - 22,000 Hz Top-mount Depth: 3.07" Sensitivity: 91dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the P1692 package: P1692 owner's manual Two 2-way 6X9" speakers 2 Grilles 3mm Allen head bit 8 Speed clips Installation & Operation manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.ca.gov

Alpine SS57 5x7" Rear Factory Speaker Replacement Kit For 1999-2002 Ford Expedition Alpine S-S57 460W Max (150W RMS) 6x8/5x7" Type S Series 2-Way Coaxial Car Speakers IT FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a 5x7-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set makes it a simple solution to getting Alpine sound in many of these vehicles on the road today. INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 5"x7" S-Type Series TYPE Car Speakers/Component System Peak Power Handling: 460 watts per pair / 230 watts each RMS Power Handling: 150 watts per pair / 75 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 1.1" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2-11/32" Cutout Dimensions: 4-15/16" x 7-3/16" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the S-S57 package: S-S57 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate 500W Punch Single P1 10 Inch Loaded Subwoofer Enclosure(2 Pack) General Features: High flow, low noise port Connects to speakers up to 10 AWG compression terminals Conforms to CEA-2031 standards Klippel verified Dimensions: 13.125 x 17 x 15.125 inches Details: Rockford Fosgate created the Punch series subwoofers and enclosures for an easy-to-install bass system to upgrade your factory subs. The Punch Single P1 10-Inch Loaded Enclosure includes a 500-watt sub in a 5/8-inch MDF constructed enclosure with high-density carpet. The vented enclosure is tuned by computer-aided design software for similar tonal performance to the P2 and P3 but is easier to move in and out of vehicles. This sub features 250 watts RMS of power handling and a 4-ohm load. The enclosure features high flow low, noise port, and quick-release compression terminals. ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate Punch P300X1 & P1-2X10 Mono Punch subwoofer Amplifier with Punch P1 Ported Loaded Enclosure Subwoofer Package Package Includes: (1) Rockford Fosgate P1-2x10 Dual 10" Loaded Enclosure (1) Rockford Fosgate P300X1 Punch 300W Mono Amplifier Our Rockford Fosgate 10" P1-2X10 & P300X1 Loaded Enclosure Subwoofer Package includes dual, Rockford Fosgate 10" P1 subwoofers in a loaded enclosure along with the Rockford Punch 300-watt mono amplifier. Our Rockford Fosgate 10" P1-2X10 & P300X1 Loaded Enclosure Subwoofer Package includes the subwoofers, the amplifier, and a wiring kit. Rockford Fosgate Punch P300X1 300W RMS Punch Series Monoblock Class AB Car Power Amplifier General Features Punch Series Monoblock Class AB Car Amplifier RMS Power Rating: 4 ohms: 200 watts x 1 chan. 2 ohms: 300 watts x 1 chan. 1 ohm: ----------N/A----------- CEA-2006 compliant amplifier Features C.L.E.A.N. Set-up with the 10-step set-up procedure w/ input/output clip detection and indicator LEDs MOSFET power supply Muted turn on Cast aluminum heatsink 12dB/octave Butterworth crossover Stealth top-mounted control panel LED power, thermal, and protection indicators Nickel-plated captive C-clamp terminals Ultra-efficient Class BD circuitry to maximize amplifier power efficiency On-board differential inputs eliminate noise picked up by the signal cable Optional PLC2 remote Punch Level Control ready with input clip indicator Optional RFIF2SW High-level input capable with Auto Turn-On circuit ( MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowering the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers Input sensitivity: 150mV - 12V On-board Punch EQ Bass: 0dB to +18dB boost @ 45Hz. Treble: 0dB to +12dB boost @ 12.5kHz. Function depends upon LP/AP/HP switch position Selectable crossover modes: LP / AP / HP Variable crossover filter: 50-250Hz Frequency response: 20 - 20,000Hz Total Harmonic Distortion: <1.0% Dimensions: 9-7/8"L x 7-3/4"W x 2-3/8"H 8 AWG to 18 AWG speaker wire output terminals Rockford Fosgate P1-2X10 Punch P1 Dual Subwoofer Loaded Enclosure Enclosure Features: Dual 10" Loaded, Ported Box Solid 5/8" MDF Construction Front-firing tuned port Spring-loaded binding posts Complete with high-density black box carpeting Dimensions: 15-1/8"D x 31-1/8"W x 13-1/8"H Subwoofer Features: 10" Punch Stage 1 Subwoofers Power Handling: Peak: 1000 watts total (500 watts each) RMS: 500 watts total (250 watts each) Recommended power range: 250 - 500 watts RMS @ 2 ohms CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Stamped Mesh Grille Insert Available: Rockford Fosgate P1G-10 [Rockford Fosgate P1 Series] Magnet Weight: 45 oz Frequency Response: 23 - 250 Hz Xmax: 9mm Sensitivity: 84 dB @ 1 watt / 1 meter ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

4 Rockford Fosgate P2D2-10 10 Inch 600 Watt 2-Ohm Punch Series Car Audio Subwoofer P2D210 (4 Pack) Rockford Fosgate Punch P2D2-10 10" Inch 1200 Watt Dual 2 Ohm Car Subwoofers Rockford Fosgate has always been known as "The PUNCH" and the P2 10" Punch car subwoofer certainly continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 10-inch subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available.General Features: 10" Dual 2 ohm Punch Stage 2 Subwoofer Power Handling: Peak: 600 watts Power Handling: RMS: 300 watts Recommended power range: 250 - 375 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Stamped Mesh Grille Insert Available: Rockford Fosgate P2P3G-10 Rockford Fosgate P2 Series Mounting Depth: 5.92" Cutout Diameter: 9.13" Magnet Weight: 66.40 oz Frequency Response: 29 - 250 Hz Xmax: 11.0 mm Sensitivity: 84 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ @40.0 Hz Recommended Sealed Enclosure: 0.59ft³ @46.6 Hz Matching Amplifiers: (one driver) Matching Amplifiers: (one driver) Rockford Fosgate R500X1D, Series @4ohms Matching Amplifiers: (one driver) Rockford Fosgate P300X2 (bridged), Series @4ohms Matching Amplifiers: (one driver) Rockford Fosgate P400X1, Series @4ohms Matching Amplifiers: (one driver) Rockford Fosgate R750-1D, Series @4ohms Matching Amplifiers: (one driver) Rockford Fosgate P1000X1BD, Series @4ohms Matching Amplifier: (two drivers) Rockford Fosgate R500X1D, Series/Parallel @2ohm Matching Amplifier: (two drivers) Rockford Fosgate R750-1D, Series/Parallel @2ohm Matching Amplifier: (two drivers) Rockford Fosgate P1000X1BD, Series/Parallel @2ohm Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca