Alpine (849)

Alpine HDZ-65CS 600W Status Hi-Res 6-1/2" (16.5cm) 2-Way Slim-fit Component Speaker Set Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation Ultra High-Resolution Alpine F#1 Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also highly flexible: all components can be purchased and used in a “stand-alone” configuration. Alpine Status offers a wide range of Hi-Res Audio-enabled speakers for the audiophile looking to build an ideal sound system. The HDZ-65CS Slim-Fit 2-Way speaker set with a high-resolution bandwidth of 55Hz – 40kHz includes a 170mm door woofer and a 40mm Slim-Fit tweeter easy to install in the original tweeter locations of your car. They also include high-end speaker x-overs. All speaker cones are made from the same Carbon Composite material to create a unified timbre identity during playback. They get very close to the AlpineF#1Status speaker's look and feel, using a very similar construction and motor assembly, as well as identical build materials for the highest sound quality General Features: 3-1/2" 2-way Component System Car Speakers Peak Power Handling: 600 watts per set / 300 watts on each side RMS Power Handling: 200 watts per set / 100 watts on each side Carbon Composite cone material speaker surround 1" Dome Tweeters CEA-2031 compliant: Voice coil Ferrite magnet motor structure Top-mount Depth: Cutout Dimensions: Impedance: Frequency Response: 55 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the HDZ-65 package : HDZ-65C owner's manual Two woofers Two woofer grilles Two tweeters Two flush-mount housings (with tweeters installed) Two threaded tweeter mounting rings Two crossovers Eight 1-1/8" Woofer mounting screws Four 1-1/8" Crossover mounting screws Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine HDZ-65 600W Status Hi-Res 6.5” (16.5cm) 2-way Coaxial Speakers Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also highly flexible: all components can be purchased and used in a “stand-alone” configuration.Alpine Status offers a wide range of Hi-Res Audio-enabled speakers for the audiophile looking to build an ideal sound system. The HDZ-65 Coaxial 2-Way speakers with a high-resolution bandwidth of 55Hz – 40kHz include 170mm door woofers with integrated 40mm Slim-Fit tweeters.All speaker cones are made from the same Carbon Composite material to create a unified timbre identity during playback. They closely replicate the AlpineF#1Status speaker's look and feel, utilizing a similar construction, motor assembly, and identical build materials to achieve the highest sound quality. General Features: 6-1/2" 2-way Coaxial Car Speakers Peak Power Handling: 600 watts per pair / 300 watts each RMS Power Handling: 200 watts per pair / 100 watts each Carbon Composite cone material Double-Gathered Edge speaker surround 1" Dome Tweeters CEA-2031 compliant: Yes Top-mount Depth: 2.63" Cutout Dimensions: 6.77" Impedance: 4 ohms Frequency Response: 55 - 40000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the HDZ-65 package : HDZ-65 owner's manual Two 2-way Speakers 2 Grilles Eight 1-1/8" Screws 8 Speed clips Owner's manual Warranty information Online product registration information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

Alpine HDZ-65C 600W Status Hi-Res 6-1/2" (16.5cm) 2-Way Component Speaker Set Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also highly flexible: all components can be purchased and used in a “stand-alone” configuration.Alpine Status offers a wide range of Hi-Res Audio-enabled speakers for the audiophile looking to build an ideal sound system. The HDZ-65C 2-Way component speaker set with a high-resolution bandwidth of 55Hz – 40kHz includes a 170mm door woofer and a 70mm ring-radiator tweeter with a 25mm voice coil. They also include high-end speaker crossovers.All speaker cones are made from the same Carbon Composite material to create a unified timbre identity during playback. They closely replicate the Alpine F#1 Status speaker's look and feel, utilizing a similar construction, motor assembly, and identical build materials to achieve the highest sound quality. General Features: 6-1/2" 2-way Component System Car Speakers Peak Power Handling: 600 watts per set / 300 watts on each side RMS Power Handling: 200 watts per set / 100 watts on each side Carbon Composite cone material Rubber speaker surround 1" Composite Cone Tweeters Ferrite magnet motor structure Top-mount Depth: 2 11/16" Cutout Dimensions: 5 5/8" Impedance: 4 ohms Frequency Response: 55 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the HDZ-65C package: HDZ-65C owner's manual Two woofers Two woofer grilles Two tweeters Two threaded tweeter mounting rings Two crossovers Eight 1-1/8" Woofer mounting screws Four 1-1/8" Crossover mounting screws Warranty information Online product registration information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

Alpine Status HDZ-653 600W Hi-Res 6-1/2" (16.5cm) 3-Way Component Speaker Set Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also highly flexible: all components can be purchased and used in a “stand-alone” configuration.Alpine Status offers a wide range of Hi-Res Audio-enabled speakers for the audiophile looking to build an ideal sound system. The HDZ-653 3-Way speaker set with a high-resolution bandwidth of 55Hz – 40kHz includes a 170mm door woofer, 96mm mid-range, and 70mm ring-radiator tweeter with a 25mm voice coil. They also include high-end speaker x-overs.All speaker cones are made from the same Carbon Composite material to create a unified timbre identity during playback. They get very close to the Alpine F#1 Status speaker's look and feel, using a similar construction, motor assembly, and identical build materials for the highest sound quality. General Features: 6-1/2" Alpine Status Hi-Res Series 3-way Component Speakers Car Speakers Peak Power Handling: 600 watts per set / 300 watts on each side RMS Power Handling: 200 watts per set / 100 watts on each side Carbon Composite cone material Double-Gathered Edge speaker surround 1" Dome Tweeters Slim fit design Hi-Res audio certified High-end X-Over networks Integrated Wave Guide on all speakers Aluminum die-cast baskets Backed carbon fiber cones CEA-2031 compliant: Yes Ferrite magnet motor structure Top-mount Depth: 2.63" Cutout Dimensions: 6.77" Impedance: 4 ohms Frequency Response: 55 - 40000 Hz Sensitivity: 88 dB Speaker grilles included Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the package HDZ-653: HDZ-653 owner's manual Two woofers Two woofer grilles Two midrange Two midrange grilles Two tweeters Two threaded tweeter mounting rings Two crossovers Eight 1-1/8" M4 Screws Sixteen 1-1/8" M3 Screws  Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SWT-10S2 1000W Peak 10" SWT Series Single 2-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S2 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S2 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 2 ohms. General Features: 10" SWT Series Single 2-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S2 package: SWT-10S2 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SWT-10S2 1000W Peak 10" SWT Series Single 2-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S2 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S2 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 2 ohms. General Features: 10" SWT Series Single 2-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S2 package: SWT-10S2 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine R-Series next generation R2-W10D4 10" 4 Ohm 2250 Max, 750W RMS DVC Car Audio Subwoofer + Absolute VGS12 Ported Box                          Alpine R2-W10D4 2250W Max (750W RMS) 10" R-Series Dual 4-Ohm Car Subwoofer The new R-Series subwoofers take a great platform to the next level. Although the R-Series subwoofers are new for 2017, they come from an impressive Alpine lineage – the Type-R subwoofers. Type-R subwoofers have been known for their power handling, clean output, and deep bass excursion at a mid-line price. Using the highly successful Type-R subwoofers as a foundation, we applied various performance and hardware improvements to the design, fundamentally transforming them into the new R-Series subwoofers – The Next Evolution of Proven Performance. STRONGER CONE ASSEMBLYR-Series subwoofers feature a Kevlar-treated cone for durability. This cone and the Santoprene surround allow the subwoofer to deliver 19mm X-max for incredible, hard-hitting bass. A new method of attaching the spider and cone to the voice coil ensures rigidity throughout the motor structure and increases the subwoofer's accuracy. MORE RIGID DUST CAP Talc, a common mineral used in products such as baby powder and paint, has been found to have incredible damping properties while being less dense than the traditional Mica filler used in dust caps. By adding a calculated amount of talc to the mica polypropylene in the dust cap, we increased the cap's vibration absorption while lowering its density. The lighter dust cap contributes to a faster attack and a more accurate reproduction of low frequencies. NEW POWER RATING All four R-Series subwoofers are rated at 750W RMS. They perfectly match the PDR-M65 Mono Power Density Amplifier, creating an efficient system. General Features: 10" Dual 4 ohm Type-R Subwoofer Peak Power Handling: 2250 watts RMS Power Handling: 750 watts Recommended power range: 300 - 750W RMS CTA-2031 compliant power ratings Parabolic pulp/kevlar cone H.A.M.R. surround Polypropylene, mica, and talc dust cap Reinforced cone neck and spider joint Cast aluminum frame with integral shorting sleeve 8AWG push terminals with VC configuration jumpers 2.6" High excursion overhung voice coil 111 oz. Strontium ferrite segmented magnet Top-mount depth: 5-7/8" Cutout diameter: 9-1/16" Frequency Response: 26 - 200Hz Sensitivity: 82.4dB Resonance Frequency (Fs): 30Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the R2-W10D4 package: R2-W10D4 owner's manual 10" Dual 4-ohm voice coil subwoofer 1 Rubber concealing ring  Four 3" jumper cables  R-Series Subwoofer Application Guide Online product registration information Warranty Information Important Notice! Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca. https://www.alpine-usa.com/product/r-series-subwoofer-r2w10d4 https://www.youtube.com/watch?v=J8g6EZzZQyI&t=131s

Alpine R-S68 Bundle - Alpine R-S68 6x8 / 5x7 Inch Coaxial 2-Way Speakers Type-R speakers have been known for their dependability and sound performance at a mid-line price. Chances are, you've heard the Type-R speakers and appreciated the loud & fun listening experience.Using the highly successful Type-R speakers as a foundation, we applied various performance and hardware improvements to the design, transforming them into the new R-Series speakers, The Next Evolution of Proven Performance.BUILDING ON AN ICONIC SPEAKERThe Type-R speaker has been an iconic part of the car audio industry for many years, but it was time for a modernization of the brand. Type-R speaker performance was undoubtedly top-notch, but there is always room for improvement. Rather than redesigning the speakers from scratch, we kept the fundamental Type-R sound & style characteristics and updated them.MORE REALISTIC HIGHSThe R-Series speakers use a new ring-type tweeter voice coil for increased efficiency and better tonal balance across the entire sound band for improved overall sound quality.A MORE BALANCED TRANSITIONAs with many high-end speakers, the Type-R components incorporate Wave Guide technology as a phase plug in the center of the woofer cone. The WaveGuide enhances in-car sound dispersion and helps eliminate phase distortion. Alpine's unique Dynamic eXpander ring stiffens the cone around the Wave Guide, eliminating a significant source of distortion in typical designs caused by cone flexing. General Features: 6"x8" 2-way car speakers (pair) 6" x 8" R-Type 2-Way Coaxial Car Speakers Power Handling Peak: 600W per pair/ 300W each Power Handling RMS: 200W per pair/ 100W each Recommended power range: 10 - 100W RMS Multi-layer hybrid fiber cone H.A.M.R. surround 1" Silk dome tweeter The tweeter swivels to give better control of your sound Large square wire dual-layer voice coil High-performance linear drive motor Top-mount Depth: 2-9/16" Cutout Dimensions: 5-1/16" x 7-1/4" 4 ohms impedance Frequency Response: 63 - 29,000 Hz Sensitivity: 89dB Authorized Internet Dealer grilles not included warranty: 1 year What is in the Alpine R-S68 package: Alpine R-S68 owner's manual Two 2-way Speakers Eight 1-1/8" Screws 8 Speed clips Warranty information Important Notice Online product registration information Template and specs on the box Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure, R-A75M 750-Watt Mono Amplifier& 4 Gauge KIT4 Amp Kit Package Includes: (1) Alpine R-SB10V Loaded 10" 600w S-W10D4 Subwoofer Ported Sub Enclosure Box (1) Alpine R-A75M 750-Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D (1) Absolute KIT4 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's Alpine R-SB10V Loaded 10" 750w R-W10D4 Subwoofer Ported Sub Enclosure Box Unique to Alpine, the 10-inch subwoofer is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer to add more bass to their system easily.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and great sound quality. The 10-inch enclosure is tuned to 36 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features: Includes R-W10D4 wired in parallel 750W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 26-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D What is in the box: Ported enclosure loaded with one R-W10D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine R-A75M R-Series Class D Monoblock Subwoofer Amplifier (750 Watts RMS) The new R-Series amplifiers produce accurate imaging and dependable power. Use them with the R-Series speakers and amplifiers for a loud and fun experience. The R-Series Amplifiers have a diagnostic LED behind the blue Alpine Jewell on the top of the amplifier. Blue light means the amplifier is operating normally. A red blinking light means the amplifier is too hot for operation and needs to cool down. A solid red light can mean three things: 1. The amplifier circuit is abnormal. 2. Temperature is too high. 3. Power supply voltage is too high. The R-Series amplifiers utilize Alpine’s advanced amplifier platform that takes the classic Class-D amplifier circuit and adds dual post-filter feedback loops for unmatched accuracy and control. This technology., Originally launched in the premium X-Series amplifiers, the R-Series amplifiers produce efficient power with enhanced dynamic range, qualifying them to be Hi-Resolution Audio compliant. General Features: Power output 2-Ohm @ 14.4 Volts: 750 W RMS X 1 Power output 4-Ohm @ 14.4 Volts: 500 W RMS X 1 THD 10 W into 4 Ohms: Less Than 0.02% THD 10 W into 2 Ohms: Less Than 0.03% THD Rated Power 4 Ohms: Less Than 0.3% THD Rated Power 2 Ohms: Less Than 1.0% S/N Ratio: 1 W into 4 Ohms: >85dB Frequency Response: +0/-3 dB 10Hz - 400Hz Frequency Response: +0/-1 dB 15Hz - 325Hz Input Sensitivity: Hi (0.5 - 10V), Low (0.2 - 4.0V) Crossover: Variable HPF/LPF, (50Hz - 400 Hz) Dimensions: Width - 10-3/4", Height - 2", Depth - 7-7/8" Weight: 7lb Absolute KIT4 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of red 4 AWG high current power cable 3 ft. of black 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire 6 ft. of split loom tubing 1 Gold-plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.     

Alpine S-S69 520W Max (170W RMS) 6" x 9" Type S Series 2-Way Coaxial Car Speakers with KTE-S69G 6x9" Speaker Grills FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a 6x9-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set makes it a simple solution to getting Alpine sound in many of these vehicles on the road today. INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6" x 9" Type S Series 2-Way Coaxial Car Speakers Power Handling: Peak: 520 watts per pair / 260 watts each Power Handling: RMS: 170 watts per pair / 85 watts each Recommended Power Range: 10 - 85 watts RMS per channel Carbon Fiber Reinforced Plastic (CFRP) Cone High Amplitude Multi-Roll (HAMR) Surround 1" Silk Dome Tweeter Rubber magnet boot cover CEA-2031 compliant speakers 35mm Voice Coil Top-mount Depth: 2-15/16" Cutout Dimensions: 5-29/32" x 8-3/4" 4 ohms Impedance Frequency Response: 65 - 22000 Hz Sensitivity: 90dB Compatible with the Alpine KTE-S69G Grille Authorized Dealer 1-year Manufacturer's Warranty What is in the S-S69 package: S-S69 owner's manual Two 2-way speakers 2 Bottom mount brackets Two 12" Lengths of speaker wire Eight 1-3/16" Screws Eight M4x60mm Machine screws  Eight M4 Nuts 8 Speed clips 16 Flat washers 8 Split lock washers 8 Spacers Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-S69 520W Max (170W RMS) 6" x 9" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a 6x9-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set is a simple solution to getting Alpine sound in many of these vehicles today. General Features: 6" x 9" Type S Series 2-Way Coaxial Car Speakers Power Handling: Peak: 520 watts per pair / 260 watts each Power Handling: RMS: 170 watts per pair / 85 watts each Recommended Power Range: 10 - 85 watts RMS per channel Carbon Fiber Reinforced Plastic (CFRP) Cone High Amplitude Multi-Roll (HAMR) Surround 1" Silk Dome Tweeter Rubber magnet boot cover CEA-2031 compliant speakers 35mm Voice Coil Top-mount Depth: 2-15/16" Cutout Dimensions: 5-29/32" x 8-3/4" 4 ohms Impedance Frequency Response: 65 - 22000 Hz Sensitivity: 90dB Compatible with the Alpine KTE-S69G Grille Authorized Dealer 1-year Manufacturer's Warranty What is in the S-S69 package: S-S69 owner's manual Two 2-way speakers 2 Bottom mount brackets Two 12" Lengths of speaker wire Eight 1-3/16" Screws Eight M4x60mm Machine screws  Eight M4 Nuts 8 Speed clips 16 Flat washers 8 Split lock washers 8 Spacers Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.