Car Amplifier Wiring Amp Kit
CAR AMPLIFIERS
CAR AMPLIFIERS ACCESSORIES
CAR AMPLIFIERS BUNDLES
Car Audio & Video
Car Component Speaker
Car Speaker
Car Speaker Bundle
Car Stereo
Car Stereo Bundle
Car Subwoofer
Car Subwoofer Bundle
Car Subwoofers with Amplifier and Box Packages
Dash Camera
Loaded Car Subwoofer Enclosure
LOADED ENCLOSURES BOX
Remote Bass Knob
Speaker Grill Mesh Cover
Subwoofer Level Controller
temporary import
Under Car Seat Powered Subwoofers
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S2-A36F S-Series Class-D 4-Channel Car Amplifier + RUX-KNOB.2 Remote Bass Level Control
$239.90
$349.90
Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier + Alpine RUX-KNOB.2 Remote Bass Level Control
The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.
General Features:
Hi-Res Audio Certified (Up to 40kHz)
Power Rating: 14.4V, < 0.3% THD +N
Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω
Bridged Power: 180W RMS x 2 @ 4Ω
4-Channel Amplifier
Alpine’s Class D Amplifier Circuit
Two-sided terminal layout
Built-in Selectable/ Adjustable Crossovers
Mid-Bass EQ Input for more power
Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)
Dimensions: 8.7” W x 2.25” H x 8.25” D
Weight: 4 lbs, 13 oz
S/N Ratio: >83dB
Frequency Response: 20Hz – 40kHz
Damping Factor: >100
Owner’s Manual
4 Self-tapping screws
Hexagon wrench
What is in the S2-A36F package:
S2-A36F owner's manual
4-Channel amplifier
2 End caps
Four 3/4" screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S2-A36F S-Series Class-D 4-Channel Car Amplifier + 0 Gauge Amp Kit
$239.99
$400.00
Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier + Absolute KIT0 0 Gauge Amp Kit
The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.
General Features:
Hi-Res Audio Certified (Up to 40kHz)
Power Rating: 14.4V, < 0.3% THD +N
Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω
Bridged Power: 180W RMS x 2 @ 4Ω
4-Channel Amplifier
Alpine’s Class D Amplifier Circuit
Two-sided terminal layout
Built-in Selectable/ Adjustable Crossovers
Mid-Bass EQ Input for more power
Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)
Dimensions: 8.7” W x 2.25” H x 8.25” D
Weight: 4 lbs, 13 oz
S/N Ratio: >83dB
Frequency Response: 20Hz – 40kHz
Damping Factor: >100
Owner’s Manual
4 Self-tapping screws
Hexagon wrench
What is in the S2-A36F package:
S2-A36F owner's manual
4-Channel amplifier
2 End caps
Four 3/4" screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S2-A36F S-Series Class-D 4-Channel Car Amplifier + 4 Gauge Amp Kit
$239.95
$299.95
Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier + Absolute KIT4 4 Gauge Amp Kit
The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.
General Features:
Hi-Res Audio Certified (Up to 40kHz)
Power Rating: 14.4V, < 0.3% THD +N
Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω
Bridged Power: 180W RMS x 2 @ 4Ω
4-Channel Amplifier
Alpine’s Class D Amplifier Circuit
Two-sided terminal layout
Built-in Selectable/ Adjustable Crossovers
Mid-Bass EQ Input for more power
Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)
Dimensions: 8.7” W x 2.25” H x 8.25” D
Weight: 4 lbs, 13 oz
S/N Ratio: >83dB
Frequency Response: 20Hz – 40kHz
Damping Factor: >100
Owner’s Manual
4 Self-tapping screws
Hexagon wrench
What is in the S2-A36F package:
S2-A36F owner's manual
4-Channel amplifier
2 End caps
Four 3/4" screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S2-A36F S-Series Class-D 4-Channel Car Amplifier
$239.95
$299.95
Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier
The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.
General Features:
Hi-Res Audio Certified (Up to 40kHz)
Power Rating: 14.4V, < 0.3% THD +N
Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω
Bridged Power: 180W RMS x 2 @ 4Ω
4-Channel Amplifier
Alpine’s Class D Amplifier Circuit
Two-sided terminal layout
Built-in Selectable/ Adjustable Crossovers
Mid-Bass EQ Input for more power
Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)
Dimensions: 8.7” W x 2.25” H x 8.25” D
Weight: 4 lbs, 13 oz
S/N Ratio: >83dB
Frequency Response: 20Hz – 40kHz
Damping Factor: >100
Owner’s Manual
4 Self-tapping screws
Hexagon wrench
What is in the S2-A36F package:
S2-A36F owner's manual
4-Channel amplifier
2 End caps
Four 3/4" screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine RS-SB12 R-Series 12" Halo Compact Loaded Subwoofer Enclosure, 1800 W subwoofer
$999.95
$1,000.00
Alpine RS-SB12 R-Series 12" Halo Compact Loaded Subwoofer Enclosure, 1800 W subwoofer.
General Features:
600 watts Single 12" Sealed Subwoofer Enclosure
Peak Power Handling: 1800 watts Total
RMS Power Handling: 600 watts Total
Final Impedance: 2 ohms
Preloaded with single 12" Subwoofers
Sealed Square/Rectangle enclosure
Enclosure Dimensions: 16" TD x 24.5" W x 5.25" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
Subwoofer Features:
Polypropylene Cone
Rubber Surround
Voice coil size/type
Frequency Response: 26 - 200 Hz
Sensitivity: 84 dB
A cast aluminum frame
Enclosure Features:
12" Square/Rectangle Enclosure
Medium-density fiberboard
Box Finish: Carpet
Steel mesh grille included to protect your speaker
What is in the RS-SB12 package:RS-SB12 owner's manualSubwoofer enclosure loaded with one RS-W12D4 12" subwoofer8 Rubber feet4 Plastic spacersEight M5x15mm screws (installed)Four M5x25mm screwsFour M5x45mm screws4 Flat-washersInstallation guideWarranty information
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
R2-A150M 1500 W RMS High-Performance Class-D Mono Sub Amplifier
$699.95
$1,000.00
Alpine R-Series R2-A150M 1500 W RMS High-Performance Class-D Mono Sub Amplifier
The Alpine “R-Series” line of speakers, subwoofers, and amplifiers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience. They have a 15% reduced footprint compared to the previous models and are easier to install.If you like loud and clear music, our Alpine R-Series R2-A150M mono amplifier is for you. It cleanly reproduces the bass in your music so you can enjoy the enhanced realism you want, even when you're playing High-Res music. We built some of our top-of-the-line amplifier technology into this R2-Series amp, including high-efficiency transformers, premium low-noise custom capacitors, and low-distortion dual "Sierra" feedback/correction circuitry.The R2-A150M mono amplifier produces up to 1200 watts RMS @ 2 Ohms, making it a perfect match for the Alpine R-Series subwoofer line. Advanced Class-D amp technology makes this powerful amp small enough to fit almost any location. You can adjust the amp's low pass, bass boost, and subsonic filter to get the right bass tone. Plus, you can add the optional RUX-KNOB2 remote bass knob to control your bass from the dash.
General Features:
Mono subwoofer amplifier
1500W Mono Amplifier
RMS Power Output: 700W x 1 @ 4Ω
RMS Power Output: 1200W x 1 @ 2Ω
RMS Power Output: 1500W x 1 @ 1Ω
Class D Amplifier Circuit
Preamp and speaker-level inputs
Variable bass boost
Power Rating: 14.4V, ≤ 1% THD +N
The amp includes preamp- and speaker-level inputs
Install almost any vehicle, even one with a factory radio
Frequency Response: 20Hz – 400Hz
S/N Ratio: >75dB
optional RUX-KNOB.2 wired remote level control
Dimensions: 13.5” W x 2.6” H x 7.3” D
What is in the R2-A150M package:
Alpine R2-A150M owner's manual
Mono subwoofer amplifier
Four 1" pan-head screws
3mm Allen key
2.5mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine PSS-23WRA Powered Subwoofer Sound System 2018- Up Jeep Wrangler Unlimited
$1,699.95
$2,000.00
Alpine PSS-23WRA Powered Sound System Upgrade for 2018 - Up Jeep Wrangler Unlimited
Powered System Upgrade for 2018-Up Jeep® Wrangler Unlimited JL
TAKE YOUR WRANGLER’S SOUND BEYOND THE FACTORYEnjoy premium sound quality even with your JL’s top-off! The PSS-23WRA is a 300-watt system upgrade featuring a powered subwoofer, amplifier, and tweeters for the 2018-Up Jeep Wrangler Unlimited JL without the factory amplified system. The PSS-23WRA provides excellent sound performance whether the JL’s top is on or off.SOUND THAT WILL TURN HEADS WITH THE TOP ON OR OFFThe PWE-S8 subwoofer is engineered to load and disperse lower-frequency sound into the passenger’s footwell area to maximize bass extension throughout the Jeep for great sound with the top on or off. The subwoofer includes a remote bass knob so you can control the bass level from the convenience of your dashboard. The included 4-channel amplifier more than doubles the power over the factory system, allowing you to enjoy your tunes with the top off.
EASY BOLT-IN INSTALLATIONThe PWE-S8 Powered Subwoofer and KTP-445U Power Pack Amplifier don’t take up much space since they mount under the passenger’s seat. The two products come pre-connected for easy bolt-in installation with simple wire routing. Mounting brackets for the products are included as well.SIMPLE TWEETER REPLACEMENTThe SPR-10TW Component Tweeters replace the factory tweeters on the top of the dash. These high-performance tweeters add much-needed high-frequency response that is lacking in the factory Jeep JL systems. An EQ Ring improves the tweeter’s dispersion characteristics and delivers a wide, flat frequency response.WORKS WITH ANY RADIOThe included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-23WRA is compatible with Alpine universal head units, the factory Jeep base radio, or other aftermarket radios.
General Features:
Complete Direct Fit Audio System Upgrade
Compatible with 2018-Up Jeep Wrangler Unlimited JL
Compatible with models that don't have a factory-amplified system
All installation hardware, such as speaker adapters and amplifier wiring, is included
CEA-2006 Compliant System
300 Watt RMS sound system
The system consists of:
8" Powered Subwoofer
Universal Power Pack Amplifier
2" Component Tweeters
Tweeter Adapters
Authorized Dealer
1-year Manufacturer's Warranty
PWE-S8 Subwoofer Features:
Peak: 240 watts
RMS: 120 watts
8" woofer high-excursion cone
built-in Class D amplifier
frequency response: 32-150 Hz
variable low-pass crossover (80-200 Hz)
variable phase control (0-180 degrees)
preamp- and speaker-level inputs
Dimensions: 13-1/2"W x 3"D x 9"H
KTP-445U Amplifier Features:
RMS Power Rating:
4 ohms: 45 watts x 4 Channel
2 ohms: 45 watts x 4 Channel
4 ohms: 90 watts x 2 Channel (Bridged)
Total RMS power output: 180 watts
CEA-2006 compliant amplifier
Increases the output of any head unit without having to install a full-size amplifier and amp install kit
The Independent front/Rear gain switch is adjustable from high to low
Runs off the receiver's power circuit
High-Pass Filter: selectable 60/80/120 Hz @ 12 dB/octave
Fast and simple installation
4-channel operation for four speakers
Minimum impedance of 2 ohms
Frequency response: 20-20,000 Hz
Fuse Rating: 15A x 1
SPR-10TW Component Tweeters:
2" Type-R Series Car Tweeters
Power Handling:
Peak: 450 watts per pair / 225 watts each
RMS: 150 watts per pair / 75 watts each
Silk Dome tweeter construction
4 ohms impedance
Copper-Clad Aluminum high-temperature voice coil
75% smaller external crossover filter removes harmful frequencies
4-way tweeter level attenuation
High-grade Neodymium magnet structure
Surface / Bottom / Flush Mountable
CEA-2031 compliant speakers
Sensitivity: 88dB
Frequency response: 1,000-29,000 Hz
Top-mount depth: 11/16"
Vehicle Compatibility:
JEEP
2018 - Up Wrangler Unlimited JL
Compatible with Wrangler JL Models that don't have a factory amplified system
What's in the PSS-23WRA package:
KTP-445U amplifier
PWE-S8 powered subwoofer (both pre-attached to vehicle mounting bracket)
7' Signal harness
12' Loomed power wire w/ inline 20A fuse
52-Pin t-harness
Four 10" speaker to RCA harnesses
Two SPR-10TW tweeters w/ integrated mounting plates and 8" wire loom w/ inline crossovers
Remote bass-level control w/ attached 16' cable
3" Strip of hook-and-loop fastener
Ten 6" wire-ties
1/2" Self-tapping screw
Star-washer
2 Alpine logos
Installation guide
Warranty sheet
Alpine PSS-23WRA owner's manual
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine ALP-HRN-CAMCH Camera Input Harness Fits Select 2007-Up Jeep/Chrysler Cars
$39.99
$70.00
Alpine Electronics ALP-HRN-CAMCH Camera Input Harness for The HCE-TCAM1-WRA, Rear View Camera System & 2007-2017 Jeep Wrangler Factory Display
The ALP-HRN-CAMCH Wrangler JK-specific custom harness is the correct length (4-foot RCA Input Cable) to reach down to the passenger side kick panel where the connection is made. It is a perfect match for the Jeep Wrangler-specific Spare Tire Rear View Camera System (HCE-TCAM1-WRA). It also works with any Alpine rear view camera system that has a universal connection, like the HCE-C114, HCE-C125, or the HCE-C305R. After installation, the factory radio will require programming to activate the camera input. Programming to open the camera input required by your local Jeep dealership.
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine ILX-507 7" Digital Multimedia Receiver and HCE-RCAM-WRA Backup Camera
$1,079.90
$1,500.00
Alpine ILX-507 7" Digital Multimedia Receiver and HCE-RCAM-WRA Backup Camera
Alpine iLX-507 7" Digital multimedia receiver with Apple CarPlay and Android Auto
A fresh face for your double-DIN dash opening
Alpine's iLX-509 digital multimedia receiver gives you trademark Alpine sound improvements and ease of use, just like its many predecessors have. What sets this radio apart is how great it looks, with a sweet high-resolution 7" touchscreen that provides plenty of info, colors, and details that pop. What's more, the iLX-507 works with Apple CarPlay® and Android Auto™ in both wired and wireless configurations, so you can choose how connected you want your phone to be. Your double-DIN (4" tall) dash opening deserves a new look, and this Alpine can fit the bill and fill the void perfectly.The iLX-507 offers many ways to enjoy your media even without a disc player. Dual rear USB inputs let you attach your smartphone or a thumb drive with your favorite music or video files. The rear HDMI connection allows you to hook to an optional CD/DVD or Blu-Ray player. An auxiliary input lets you bring in audio from another source, such as an old-school portable disc player.Add some securityThe iLX-507 is compatible with Apple CarPlay and Android Auto, so you and your passengers can enjoy messaging, mapping, tune selection, and much more from your smartphone. Both platforms work with voice commands, which you can activate by speaking a keyword or pressing the dedicated "Voice" button on the stereo's bezel. You can use either platform with your phone plugged in or wirelessly. General features:
Digital multimedia receiver with AM/FM tuner (does not play discs)
7" capacitive touchscreen
high-resolution (1280x720 pixels) display
fits in double-DIN (4" tall) dash openings
HD Radio tuner built-in
Bluetooth hands-free calling and audio streaming (external microphone included)
Apple CarPlay compatible (wired and wireless)
Android Auto compatible (wired and wireless)
built-in iPod, iPhone, and iPad control
playback and control of music files on compatible Android devices
Pandora, Spotify, and Tidal control with iPhone and Android
plays MP3, WMA, AAC, APE, and FLAC music files (see Details tab for full capabilities)
plays AVC, FLV, H 264, MP4, MPEG-4, and MOV video files
plays lossless FLAC audio files up to 96kHz/24-bit
24-bit digital-to-analog converter (DAC)
13-band parametric equalizer (Basic or Advanced)
6-channel time correction
high- and low-pass filters
Bass Engine SQ
MediaXpander HD
Works with SiriusXM SXV300 tuner—supports Tune Mix, Traffic & Weather Now, and Sports Flash features
compatible with the optional Halo wireless level controller
compatible with an optional 2-camera switcher
Inputs: 2 rear USB ports; rear HDMI input; rear auxiliary input; 2 camera inputs (RCA)
outputs: rear HDMI output; 6-channel preamp outputs (4-volt front, rear, subwoofer)
wired connection to the parking brake required to access settings, video display, and other features on this receiver (the parking brake must be connected and set, released, and set again)
built-in internal amp (16 watts RMS CTA-2006/50 peak x 4 channels)
Compatible with most factory steering wheel audio controls (adapter required)
CTA-2006 compliant
compatible with iDatalink Maestro
retains factory features in a wide selection of vehicles
displays engine performance data on a touchscreen
What's in the iLX-507 package:
iLX-507 owner's manual
Digital multimedia receiver
Trim-ring
Wiring harness
Preout harness
iDatalink/Driver Recorder/Front Camera harness
Camera input adapter harness
Mic/SWC harness
Microphone
Surface-mount bracket
Two-sided tape
GPS antenna
Self-adhesive mounting pad
3 Self-adhesive cable clamps
4 Pan-head ISO screws
4 Counter-sunk ISO screws
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine ILX-407 7" Multimedia Receiver & HCE-RCAM-WRA Spare Tire Backup Camera
$839.90
$900.00
Alpine iLX-407 Shallow Chassis 7 Inch Multimedia Receiver with Apple Carplay
Alpine's iLX-407 digital multimedia receiver fits a wide array of dashes thanks to its shallow chassis design, but the feature set this command center packs is anything but thin. It works with both Apple CarPlay® and Android Auto™ for convenient control of your favorite smartphone functions, and it offers a bevy of entertainment options for the discerning road warrior. Best of all, it works with Alpine's bodacious PowerStack amplifiers to boost your system's performance without the hassle of a full-blown amp installation.Perfect for PowerStack ampsGeneral Features:
digital media receiver with AM/FM tuner (does not play discs)
7" capacitive touchscreen
fits double-DIN dash openings
Bluetooth hands-free calling and audio streaming
HD Radio tuner built-in
Smartphone Features (see Details for info on compatibility with specific smartphones and apps):
Apple CarPlay and Android Auto are compatible
built-in iPod, iPhone, and iPad control
playback and control of music files on compatible Android devices
Audio/video Features:
plays MP3, WMA, AAC, WAV, and FLAC music files (see Details for full capabilities)
plays AVI and MPEG4 video files
5-band graphic equalizer with time correction
10 EQ curve presets
high- and low-pass filters
Bass Engine SQ
MediaXpander HD
Expandability:
works with SiriusXM SXV300 tuner—supports Tune Mix, Traffic & Weather Now, and Sports Flash features
compatible with the optional Alpine DVE-5300 DVD player
works with Alpine PowerStack amplifiers in most dash openings
inputs: rear USB port, rear HDMI input, rear 3.5mm mini A/V input, front- and rear-view camera inputs
outputs: rear composite video output; 6-channel preamp outputs 4-volt front, rear, subwoofer
Other Information:
wired connection to the parking brake is required to access settings, video display, and other features on this receiver
built-in internal amp (16 watts RMS CTA-2006 x 4 channels/50 watts peak)
compatible with most factory steering wheel audio controls (adapter required)
compatible with iDatalink Maestro
retains factory features in a wide selection of vehicles
displays engine performance data on a touchscreen
warranty: 1 year
MFR # ILX-407
What's in the iLX-407 package:
iLX-407 owner's manual
Digital multimedia receiver
Wiring harness (15A fuse)
Preout/Camera harness
Video in/out of the harness
iDatalink harness
41" USB extension cable
Microphone
Bracket for microphone
4 ISO-screws
Quick Reference Guide
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine ILX-F509 Halo 9" Digital Multimedia Receiver & HCE-RCAM-WRA Backup Camera
$1,799.90
$1,999.00
Alpine Halo9 ILX-F509 9" Digital Multimedia Receiver (Does Not Play Discs) and HCE-RCAM-WRA Spare Tire Backup Camera
Alpine Halo9 iLX-F509 Digital multimedia receiver 9" touchscreen that fits in a DIN dash opening (does not play discs)Alpine's iLX-F509 Halo9 digital media receiver takes all the things you love about their Halo9 iLX-F409 stereo and adds wireless Apple CarPlay®/Android Auto™ and a high-resolution display to make it even more car-friendly. It boasts an impressive 9" touch display yet can be in most single-DIN (2" tall) dash openings — and it's adjustable so you can set the perfect viewing angle and still get to your climate controls. Alpine added a LOT more pixels to the display, making it even more responsive to deliver high-quality images quickly. It also features smartphone integration so you can roll with your favorite apps, plus compatibility with the iDatalink Maestro module so you can keep your beloved factory features.
General features:
digital multimedia receiver with AM/FM tuner (does not play discs)
9" hi-res capacitive touchscreen with adjustable vertical mounting positions and viewing angles
high-resolution (1280x720 pixels) display
fits single-DIN dash openings
HD Radio tuner built-in
Bluetooth hands-free calling and audio streaming (external microphone included)
Apple CarPlay compatible (wired and wireless)
Android Auto compatible (wired and wireless)
built-in iPod, iPhone, and iPad control
playback and control of music files on compatible Android devices
Pandora, Spotify, and Tidal control with iPhone and Android
plays MP3, WMA, AAC, APE, and FLAC music files (see Details tab for full capabilities)
plays AVC, FLV, H,264, MP4, MPEG-4, and MOV video files
plays lossless FLAC audio files up to 96kHz/24-bit
24-bit digital-to-analog converter (DAC)
13-band parametric equalizer (Basic or Advanced)
6-channel time correction
high- and low-pass filters
Bass Engine SQ
MediaXpander HD
works with SiriusXM SXV300 tuner—supports Tune Mix, Traffic & Weather Now, and Sports Flash features
compatible with the optional Halo wireless level controller
compatible with an optional 2-camera switcher
inputs: 2 rear USB ports; rear HDMI input; rear auxiliary input; 2 camera inputs (RCA)
outputs: rear HDMI output; 6-channel preamp outputs (4-volt front, rear, subwoofer)
wired connection to the parking brake is required to access settings, video display, and other features on this receiver (the parking brake must be connected and set, released, and set again)
built-in internal amp (16 watts RMS CTA-2006/50 peak x 4 channels)
compatible with most factory steering wheel audio controls (adapter required)
CTA-2006 compliant
compatible with iDatalink Maestro
retains factory features in a wide selection of vehicles
displays engine performance data on a touchscreen
What's in the iLX-F509 package:
iLX-F509 owner's manual
9" Touchscreen monitor
Source unit
Wiring harness (15A fuse)
Preout harness
iDatalink/Driver Recorder/Front Camera harness
Camera input adapter
harness
Mic/SWC harness
Microphone
Surface-mount bracket
Two-sided tape
GPS antenna
Self-adhesive mounting pad
3 Self-adhesive cable clamps
Power-plate
2 Rear covers
HDMI connector clamp
4 Pan-head ISO screws (M5x8mm)
4 Counter-sunk ISO screws (M5x8mm)
3 Display screws (M5x8mm)
2 Hinge screws (M3x4mm)
2 Rear cover screws (M2.6x6mm)
4 Rectangle self-adhesive sheets
4 Square self-adhesive sheets
2 Round self-adhesive sheets
2 Semi-oval self-adhesive sheets
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R2-W12D4 2250W 12" R-Series Dual 4-Ohm Car Subwoofer + KTE-12G.3 Grille
$1,079.80
$1,000.00
2 Alpine R2-W12D4 2250W Max (750W RMS) 12" R-Series Dual 4-Ohm Car Subwoofer + KTE-12G.3 Grille
The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response.
General Features:
12" Dual 4 ohm Type-R Subwoofer
Peak Power Handling: 2250watts
RMS Power Handling: 750 watts
Recommended power range: 300 - 750W RMS
CTA-2031 compliant power ratings
Parabolic pulp/kevlar cone
H.A.M.R. surround
Polypropylene, mica, and talc dust cap
Reinforced cone neck and spider joint
Cast aluminum frame with integral shorting sleeve
8AWG push terminals with VC configuration jumpers
2.6" High excursion overhung voice coil
127 oz. Strontium ferrite segmented magnet
Top-mount depth: 6-3/8"
Cutout diameter: 10-7/8"
Frequency Response: 24 - 200Hz
Sensitivity: 84.3dB
Resonance Frequency (Fs): 27Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the R2-W12D4 package:
R2-W12D2 owner's manual
One 12" Dual 4-ohm voice coil subwoofer
Two 3" jumper cables
R-Series Subwoofer Application Guide
Online product registration information
Warranty Information
https://www.youtube.com/watch?v=ihjWBSOYVxE&t=179s
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.