Alpine Subwoofers with Boxes (31)

Alpine PSS-23WRA Powered Sound System Upgrade for 2018 - Up Jeep Wrangler Unlimited Powered System Upgrade for 2018-Up Jeep® Wrangler Unlimited JL TAKE YOUR WRANGLER’S SOUND BEYOND THE FACTORYEnjoy premium sound quality even with your JL’s top-off! The PSS-23WRA is a 300-watt system upgrade featuring a powered subwoofer, amplifier, and tweeters for the 2018-Up Jeep Wrangler Unlimited JL without the factory amplified system. The PSS-23WRA provides excellent sound performance whether the JL’s top is on or off.SOUND THAT WILL TURN HEADS WITH THE TOP ON OR OFFThe PWE-S8 subwoofer is engineered to load and disperse lower-frequency sound into the passenger’s footwell area to maximize bass extension throughout the Jeep for great sound with the top on or off. The subwoofer includes a remote bass knob so you can control the bass level from the convenience of your dashboard. The Included 4-channel amplifier more than doubles the power over the factory system allowing you to enjoy your tunes with the top off. EASY BOLT-IN INSTALLATIONThe PWE-S8 Powered Subwoofer and KTP-445U Power Pack Amplifier don’t take up much since they mount under the passenger’s seat. The two products come pre-connected for easy bolt-in installation with simple wire routing. Mounting brackets for the products are included as well.SIMPLE TWEETER REPLACEMENTThe SPR-10TW Component Tweeters replace the factory tweeters on the top of the dash. These high-performance tweeters add much-needed high-frequency response that is lacking in the factory Jeep JL systems. An EQ Ring improves the tweeter’s dispersion characteristics and delivers a wide, flat frequency response.WORKS WITH ANY RADIOThe included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-23WRA is compatible with Alpine universal head units, the factory Jeep base radio, or other aftermarket radios. General Features: Complete Direct Fit Audio System Upgrade Compatible with 2018 - Up Jeep Wrangler Unlimited JL Compatible with models that don't have a factory-amplified system All installation hardware, such as speaker adapters and amplifier wiring, included CEA-2006 Compliant System 300 Watt RMS sound system The system consists of: 8" Powered Subwoofer Universal Power Pack Amplifier 2" Component Tweeters Tweeter Adapters Authorized Dealer 1-year Manufacturer's Warranty PWE-S8 Subwoofer Features: Peak: 240 watts RMS: 120 watts 8" woofer high-excursion cone built-in Class D amplifier frequency response: 32-150 Hz variable low-pass crossover (80-200 Hz) variable phase control (0-180 degrees) preamp- and speaker-level inputs Dimensions: 13-1/2"W x 3"D x 9"H KTP-445U Amplifier Features: RMS Power Rating: 4 ohms: 45 watts x 4 Channel 2 ohms: 45 watts x 4 Channel 4 ohms: 90 watts x 2 Channel (Bridged) Total RMS power output: 180 watts CEA-2006 compliant amplifier Increases the output of any head unit without having to install a full-size amplifier and amp install kit The Independent front/Rear gain switch is adjustable from high to low Runs off the receiver's power circuit High-Pass Filter: selectable 60/80/120 Hz @ 12 dB/octave Fast and simple installation 4-channel operation for four speakers Minimum impedance of 2 ohms Frequency response: 20-20,000 Hz Fuse Rating: 15A x 1 SPR-10TW Component Tweeters: 2" Type-R Series Car Tweeters Power Handling: Peak: 450 watts per pair / 225 watts each RMS: 150 watts per pair / 75 watts each Silk Dome tweeter construction 4 ohms impedance Copper-Clad Aluminum high-temperature voice coil 75% smaller external crossover filter removes harmful frequencies 4-way tweeter level attenuation High-grade Neodymium magnet structure Surface / Bottom / Flush Mountable CEA-2031 compliant speakers Sensitivity: 88dB Frequency response: 1,000-29,000 Hz Top-mount depth: 11/16" Vehicle Compatibility: JEEP 2018 - Up Wrangler Unlimited JL Compatible with Wrangler JL Models that don't have a factory amplified system What's in the PSS-23WRA package: KTP-445U amplifier PWE-S8 powered subwoofer (both pre-attached to vehicle mounting bracket) 7' Signal harness 12' Loomed power wire w/ inline 20A fuse 52-Pin t-harness Four 10" speaker to RCA harnesses Two SPR-10TW tweeters w/ integrated mounting plates and 8" wire loom w/ inline crossovers Remote bass-level control w/ attached 16' cable 3" Strip of hook-and-loop fastener Ten 6" wire-ties 1/2" Self-tapping screw Star-washer 2 Alpine logos Installation guide Warranty sheet Alpine PSS-23WRA owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine RS-SB10 10" Halo R-Series R2 Preloaded Subwoofer Enclosure with ProLink The next generation of sound performance is here with the new R-Series Halo Preloaded Subwoofers featuring the new R-Series “R2” subwoofers for more accurate and authoritative bass. PRODUCT FEATURES: Unique ProLink Design – ProLink is unique to Alpine and allows you to link two R2-SB10V enclosures together using an optional KTX-H10 linking kit to create a dual subwoofer enclosure. Stand Out in the Crowd – Drawing inspiration from the sleek, tapered lines and clean silver finish of the Alpine Halo display, the R2-SB10V shares the same unique, curved edges outlined by a silver trim and a metallic front baffle for a matching system aesthetic. Improved Performance – The new R-Series subwoofers now feature larger, double-stacked magnets that contribute more motor force for deeper bass and tighter bass control compared to the previous generation. General Specs: Size: 10” Weight: 42 lbs Dimensions: 16” x 12.68” x 14.5” Frequency Response: 26Hz - 200Hz Power Range: 300W - 750W RMS Power Handling: 750W RMS / 2250W Peak Magnet Weight: 123 oz Voice Coil Diameter: 65.5 mm (2.6”) Linear Excursion (Xmax): 20 mm T/S Parameters: Sensitivity (1W/1m): 82.3 dB DC Resistance (Re): 1.9Δ + 1.9Δ Free Air Resonance (Fs): 31 Hz Equivalent Stiffness: 18.2 L Mechanical Q (Qms): 7.07 Electrical Q (Qes): 0.5 Total Q (Qts): 0.47 Cone Area (Sd): 333 cm2 Linear Excursion (Xmax): 20 mm Mechanical Travel (Xmech): 70 mm The next generation of sound performance is here with the new R-Series Halo Preloaded Subwoofers featuring the new R-Series “R2” subwoofers for more accurate and authoritative bass. Unique ProLink Design – ProLink is unique to Alpine and allows you to link two R2-SB10V enclosures together using an optional KTX-H10 linking kit to create a dual subwoofer enclosure. Stand Out in the Crowd – Drawing inspiration from the sleek, tapered lines and clean silver finish of the Alpine Halo display, the R2-SB10V shares the same unique, curved edges outlined by a silver trim and a metallic front baffle for a matching system aesthetic. Improved Performance – The new R-Series subwoofers now feature larger, double-stacked magnets that contribute more motor force for deeper bass and tighter bass control compared to the previous generation.

 Alpine S-W10D4 10"  Type S Car Audio Subwoofer with Absolute SS10 Custom Sub Box Enclosure Package This Package Includes the Following Items: 1 x Absolute SS10 Car Audio Single 10" Sealed Subwoofer Sub Box Enclosure MDF Wood 1 x Alpine S-W10D4 Car Audio Type S Series Sub Dual 4 Ohm 1200W Peak 10" Subwoofer Alpine S-W10D4 1800W Max (600W RMS) 10" S-Series Dual 4 Ohm Car Subwoofer General Features: 10" 4 ohm S-Series (Type-S) Subwoofer Power Handling: Peak: 1800 watts RMS: 600 watts Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 4-11/16" Cutout diameter: 8-13/16 Frequency Response: 26- 200Hz Sensitivity: 86.4dB Resonance Frequency (Fs): 33 Hz Authorized Dealer 1-year Manufacturer's Warranty What is in the S-W10D4 package: Alpine S-W10D4 owner's manual One 10" Dual 4-ohm voice coil subwoofer Two 3" jumper cables Subwoofer Application Guide Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-SB10V 10" Vented Loaded Halo Enclosure + Alpine KTX-H10 Linking Kit Alpine S-SB10V 10" Vented Loaded Halo Enclosure. This bundle includes an Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure + Alpine KTX-H10 Linking KitAlpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer EnclosureAlpine Electronics of America, Inc. introduced a new sound system lineup for the Halo category that includes a 10-inch enclosure and remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers.This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single box design but have a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure.Enclosure Stacking FeaturesUnique to Alpine, the subwoofer 10-inch is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features: S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D What is in the S-SB10V box: Ported enclosure loaded with one S-W10D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology. General Features: Aluminum rear link plate 10-inch Front ABS / Steel reinforced the port link Center link stabilizing dowels Alpine logo plate All hardware included Authorized Internet Dealer What is in the KTX-H10 box: Front port-link Two 9" front port braces 23.25" Rear link-plate Four 25mm hex-socket screws Eight 14mm hex-socket screws Four 20mm threaded alignment posts 3mm Allen-key Installation instructions Safety warnings KTX-H10 Linking Kit owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier - This bundle includes an Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms, a pry kit, and an Alpine cozy.Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer EnclosureAlpine Electronics of America, Inc. introduced a new sound system lineup for the Halo category that includes a 10-inch enclosure and remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers.This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single box design but have a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure.Enclosure Stacking FeaturesUnique to Alpine, the subwoofer 10-inch is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features: S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D What is in the S-SB10V box: Ported enclosure loaded with one S-W10D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology. General Features: Aluminum rear link plate 10-inch Front ABS / Steel reinforced the port link Center link stabilizing dowels Alpine logo plate All hardware included Authorized Internet Dealer What is in the KTX-H10 box: Front port-link Two 9" front port braces 23.25" Rear link-plate Four 25mm hex-socket screws Eight 14mm hex-socket screws Four 20mm threaded alignment posts 3mm Allen-key Installation instructions Safety warnings KTX-H10 Linking Kit owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

(2) Alpine R-SB12V Loaded 12" 750w R-W12D4 Subwoofers+Ported Sub Enclosure Box Enclosure Stacking FeaturesUnique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features: Includes R-W12D4 wired in parallel 750W RMS power handling 2 Ohm Impedance Ported Enclosure Design Frequency Response: 24-200Hz Vent Tuning Frequency: 35Hz Dimensions: 17" W x 14.625" H x 15" D Authorized Dealer 1-year Warranty What is in the box: Ported enclosure loaded with one R-W12D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine KTX-H12 Linking KitWhen it comes to bass, two is always better than one. Alpine's KTX-H12 linking kit allows you to connect two Alpine S-SB12V or R-SB12V 12" subwoofer enclosures to double your bass. The kit includes heavy-duty steel front and rear linking brackets to securely connect the enclosures as well as all the hardware you'll need. The front bracket's silver finish is made to coordinate with the enclosures' design, while the silver Alpine badge adds a touch of style. Warranty: 1 year.What is in the box: Front port-link Two 9" front port braces 23.25" Rear link-plate Four 25mm hex-socket screws Eight 14mm hex-socket screws Four 20mm threaded alignment posts 3mm Allen-key Installation instructions ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

(2) Alpine R-SB12V Loaded 12" 750w R-W12D4 Subwoofers+Ported Sub Enclosure Box Enclosure Stacking FeaturesUnique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer to add more bass to their system easily.The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and great sound quality. The 10-inch enclosure is tuned to 36 Hz, while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features: Includes R-W12D4 wired in parallel 750W RMS power handling 2 Ohm Impedance Ported Enclosure Design Frequency Response: 24-200Hz Vent Tuning Frequency: 35Hz Dimensions: 17" W x 14.625" H x 15" D Authorized Dealer 1-year Warranty What is in the R-W12D4 package: Ported enclosure loaded with one R-W12D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine KTX-H12 Linking KitWhen it comes to bass, two is always better than one. Alpine's KTX-H12 linking kit allows you to connect two Alpine S-SB12V or R-SB12V 12" subwoofer enclosures to double your bass. The kit includes heavy-duty steel front and rear linking brackets to connect the enclosures and all the necessary hardware securely. The front bracket's silver finish is made to coordinate with the enclosures' design, while the silver Alpine badge adds a touch of style. Warranty: 1 year.What is in the KTX-H12 package: Front port-link Two 9" front port braces 23.25" Rear link-plate Four 25mm hex-socket screws Eight 14mm hex-socket screws Four 20mm threaded alignment posts 3mm Allen-key Installation instructions ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Alpine SBT-S10V Truck Loaded SWT Enclosure 1000W Peak (350W RMS) Single 10" Loaded Ported Subwoofer Enclosure With a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications, with a design that works in small spaces. The Alpine logos on the front and the bottom offer convenient visibility options when mounted horizontally or vertically. Creates a symmetrical magnetic field with evenly distributed flux density to reduce distortion while improving power handling and output significantly. Provides the mechanical clearance needed for over 50mm of peak-to-peak excursion, unleashing massive output potential from a small package. The High-Amplitude Multi Roll Surround Design allows for extreme excursions without sacrificing valuable cone area. FEA Optimized for linearity and made with injection-molded Santoprene ®, the HAMR surround is a key part of the suspension system that provides accurate, distortion-free control at extreme excursions. More Bass, Less SpaceWith a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications, with a design that works in small spaces.Two-Way Alpine Logo FlexibilityThe Alpine logos on the front and the bottom offer convenient visibility options when mounted horizontally or vertically.Significant Output in a Compact Package with 4 Unique Alpine Subwoofer TechnologiesRadial Vented VC Heat Sink & Airflow Management SystemActively manages voice coil temperatures by forcing air directly across the heat sink system. FEA Optimized Dual-Sided Machined CRC Motor Structure Creates a symmetrical magnetic field with evenly distributed flux density to reduce distortion while improving power handling and output significantly. FEA Optimized Injection Molded TPE Spider with Pass-Through Gap Design Provides the mechanical clearance needed for over 50mm of peak-to-peak excursion, unleashing massive output potential from a small package Subwoofer Features: 10" SWT Series Single 2-ohm Shallow Mount Subwoofer Peak Power Handling: 1000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround, featuring H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding Frequency Response: 28 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty Enclosure Features: Ported angled / wedge-style truck enclosure 3/8" medium-density fiberboard (MDF) construction Automotive-grade dark grey carpet 8AWG Push Terminals Protective mesh subwoofer grilled included Dimensions: 7"D x 22"W x 16"H What's in the SBT-S10V package: Ported enclosure loaded with one 10" woofer 2 Mounting plates Six 1/2" Self-tapping screws Owner's manual (English/ French/ Spanish) Installation notes Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine SBT-S10V Truck Loaded SWT Enclosure 1000W Peak (350W RMS) Single 10" Loaded Ported Subwoofer Enclosure With a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications, with a design that works in small spaces. The Alpine logos on the front and the bottom offer convenient visibility options when mounted horizontally or vertically. Creates a symmetrical magnetic field with evenly distributed flux density to reduce distortion while improving power handling and output significantly. Provides the mechanical clearance needed for over 50mm of peak-to-peak excursion, unleashing massive output potential from a small package. The High-Amplitude Multi Roll Surround Design allows for extreme excursions without sacrificing valuable cone area. FEA Optimized for linearity and made with injection-molded Santoprene ®, the HAMR surround is a key part of the suspension system that provides accurate, distortion-free control at extreme excursions. More Bass, Less SpaceWith a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications, with a design that works in small spaces.Two-Way Alpine Logo FlexibilityThe Alpine logos on the front and the bottom offer convenient visibility options when mounted horizontally or vertically.Significant Output in a Compact Package with 4 Unique Alpine Subwoofer TechnologiesRadial Vented VC Heat Sink & Airflow Management SystemActively manages voice coil temperatures by forcing air directly across the heat sink system. FEA Optimized Dual-Sided Machined CRC Motor Structure Creates a symmetrical magnetic field with evenly distributed flux density to reduce distortion while improving power handling and output significantly. FEA Optimized Injection Molded TPE Spider with Pass-Through Gap Design Provides the mechanical clearance needed for over 50mm of peak-to-peak excursion, unleashing massive output potential from a small package Subwoofer Features: 10" SWT Series Single 2-ohm Shallow Mount Subwoofer Peak Power Handling: 1000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround, featuring H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding Frequency Response: 28 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty Enclosure Features: Ported angled / wedge-style truck enclosure 3/8" medium-density fiberboard (MDF) construction Automotive-grade dark grey carpet 8AWG Push Terminals Protective mesh subwoofer grilled included Dimensions: 7"D x 22"W x 16"H What's in the SBT-S10V package: Ported enclosure loaded with one 10" woofer 2 Mounting plates Six 1/2" Self-tapping screws Owner's manual (English/ French/ Spanish) Installation notes Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Universal Car Stereo Rearfire Vented Sealed Single 12" Alpine R2-W12D4 Type R Car Audio Subwoofer Custom Sub Box Enclosure Package This Package Includes the Following Items: 1 x Absolute VEGS12 Car Audio Single 12" Sealed Subwoofer Sub Box Enclosure MDF Wood 1 x Alpine R2-W12D4 Car Audio Type S Series Sub Dual 4 Ohm 1200W Peak 12" Subwoofer Alpine R2-W12D4 2250W Max (750W RMS) 12" R-Series Dual 4-Ohm Car Subwoofer The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response. General Features: 12" Dual 4 ohm Type-R Subwoofer Peak Power Handling: 2250watts RMS Power Handling: 750 watts Recommended power range: 300 - 750W RMS CTA-2031 compliant power ratings Parabolic pulp/kevlar cone H.A.M.R. surround Polypropylene, mica, and talc dust cap Reinforced cone neck and spider joint Cast aluminum frame with integral shorting sleeve 8AWG push terminals with VC configuration jumpers 2.6" High excursion overhung voice coil 127 oz. Strontium ferrite segmented magnet Top-mount depth: 6-3/8" Cutout diameter: 10-7/8" Frequency Response: 24 - 200Hz Sensitivity: 84.3dB Resonance Frequency (Fs): 27Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the R2-W12D4 package: R2-W12D2 owner's manual One 12" Dual 4-ohm voice coil subwoofer Two 3" jumper cables R-Series Subwoofer Application Guide Online product registration information Warranty Information https://www.youtube.com/watch?v=ihjWBSOYVxE&t=179s ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier + Alpine KTX-H10 Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier - This bundle includes an Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms, a pry kit, and an Alpine cozy.Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer EnclosureAlpine Electronics of America, Inc. introduced a new sound system lineup for the Halo category that includes a 10-inch enclosure and remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers.This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single box design but have a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure.Enclosure Stacking FeaturesUnique to Alpine, the subwoofer 10-inch is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features: S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D What is in the S-SB10V box: Ported enclosure loaded with one S-W10D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier A TOUGH MINI AMP THAT PACKS A PUNCH Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags. A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT The KTA-30MW is perfect for when you want to add subwoofer power but don’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice. HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue. General Features: Alpine KTA-30MW Class D Monoblock Weather Resistant Power Pack Amplifier 300 Watts RMS X 1 @ 4 Ohms Power Handling 600 Watts RMS X 1 @ 2 Ohms Power Handling CTA-2006 compliant Frequency Response: 20-400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 83dB Variable Low Pass filter 50-400Hz @ -24dB/Oct. Variable Bass Boost (0-12 dB at 50 Hz) Fuse Rating: 25A Weather-resistant (IP66 rating) Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs Dimensions: 7” W x 3.5” H x 1.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the KTA-30MW box: Mono amplifier 14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends) 4 Self-tapping screws (Length 3/4") Connection sheet Limited Warranty sheet KTA-30MW owner's manual Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology. General Features: Aluminum rear link plate 10-inch Front ABS / Steel reinforced the port link Center link stabilizing dowels Alpine logo plate All hardware included Authorized Internet Dealer What is in the KTX-H10 box: Front port-link Two 9" front port braces 23.25" Rear link-plate Four 25mm hex-socket screws Eight 14mm hex-socket screws Four 20mm threaded alignment posts 3mm Allen-key Installation instructions Safety warnings KTX-H10 Linking Kit owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

(2) Alpine R-SB12V Loaded 12" 750w R-W12D4 Subwoofers+Ported Sub Enclosure Box Enclosure Stacking FeaturesUnique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features: Includes R-W12D4 wired in parallel 750W RMS power handling 2 Ohm Impedance Ported Enclosure Design Frequency Response: 24-200Hz Vent Tuning Frequency: 35Hz Dimensions: 17" W x 14.625" H x 15" D Authorized Dealer 1-year Warranty What is in the box: Ported enclosure loaded with one R-W12D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine KTX-H12 Linking KitWhen it comes to bass, two is always better than one. Alpine's KTX-H12 linking kit allows you to connect two Alpine S-SB12V or R-SB12V 12" subwoofer enclosures to double your bass. The kit includes heavy-duty steel front and rear linking brackets to securely connect the enclosures as well as all the hardware you'll need. The front bracket's silver finish is made to coordinate with the enclosures' design, while the silver Alpine badge adds a touch of style. Warranty: 1 year.What is in the box: Front port-link Two 9" front port braces 23.25" Rear link-plate Four 25mm hex-socket screws Eight 14mm hex-socket screws Four 20mm threaded alignment posts 3mm Allen-key Installation instructions ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov