00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Bundle 2-Pairs of SXE-6926s 6x9" Coax Speakers and a BBX-F1200 280W 4-Ch Amp and Wiring
$299.99
$549.99
Alpine Bundle 2-Pairs of SXE-6926s 6x9" Coax Speakers and a BBX-F1200 280W 4-Ch Amp and Wiring
Alpine Bundle 2-Pairs of SXE-6926s 6x9" Coax Speakers and a BBX-F1200 280W 4-Ch Amp and Wiring - This bundle includes 2 pairs of Alpine SXE-6926S 6x9" 2-Way Coaxial Speaker, an Alpine BBX-F1200 280 Watt 4-Channel Amplifier, a wiring kit, a pry kit, and an Alpine cozy.
Alpine SXE-6926S 2-way 6"x9" 280 Watts Coaxial SpeakersAlpine SXE-6926S main feature is a Mylar-Titanium Balanced Dome Tweeter for smooth vocal reproduction at a price not to be missed. The tweeters in this set sound fantastic. Alpine mids and highs have always been well-rounded and smooth sounding. This set of component speakers is no different.General Features:
6 x 9" Type-E Series Coaxial Car Speakers
Power Handling:
Peak: 280 watts per pair / 140 watts each
RMS: 90 watts per pair / 45 watts each
Long fiber natural pulp woofer
Mylar dome tweeter
Frequency Response: 40-20,000 Hz
Mounting Depth: 68mm
Sensitivity: 92dB
Grilles included
What is in the SXE-6926S package:
6X9" Speakers (2)
Mounting screws (4)
Mounting screws (8)
Speaker connection cables (2)
SXE-6926S owner's manual
Alpine BBX-F1200 600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier
This new BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system.
High Power, Great Value
This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget.
High Pass and Low Pass Filters
These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency.
Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass.
General Features:
Alpine BBX-F1200
Class-A/B 2-ohm Stable 4-Channel Amplifier
RMS Power Rating:
4 ohms: 50 watts x 4 channel
2 ohms: 70 watts x 4 channel
1 ohm: ------------N/A------------
Bridged, 4 ohms: 130 watts x 2 channel
Total power output: 600 watts
Pulse Width Modulated MOSFET power supply
LED power (green) and protect (red) indicators
Soft start turn-on
4/3/2 or channel operation
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity: .2V - 8V
Frequency Response: 5 - 50000 Hz
Total Harmonic Distortion (THD): <1%
Signal Noise Ratio: 95dB
Variable high-pass filter: 50 - 500 Hz
Variable low-pass filter: 50 - 500 Hz
Variable Bass Boost: 0 to +12 dB bass boost
Fuse Rating: 40A x 1
Dimensions: 9.4"W x 12.9"L x 2"H
Authorized Dealer
1-year Manufacturer's Warranty.
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine SBT-S10V RUX-KNOB.2 KTA-200M Mono Power Pack Amp with 10" Loaded Subwoofer Truck Enclosure and Bass Knob
$529.85
$750.00
Alpine KTA-200M Mono Power Pack Amp with Alpine SBT-S10V 10" Loaded Subwoofer Truck Enclosure and Bass Knob
This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine SBT-S10V Truck Enclosure with a 10" SWT Subwoofer, and an Alpine RUX-KNOB.2 Remote Bass Knob.
Alpine KTA-200M Mono Power Pack Amp
The KTA-200M fits in the open space behind Alpine’s iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D), occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier in a compact size, easy installation, and overall power. While designed to “stack” behind the iLX-W650, or similar 2-DIN radio, both amplifiers can also be used as standalone solutions in vehicles that don’t have space for a traditional amplifier. The KTA-200M produces 400 watts with Alpine’s DPP technology. During powerful or “dynamic” passages of music, DPP will adapt to the needs of the piece by adjusting the gain of the amplifier and delivering bursts of power that match the peak demands of the music. Alongside that is the new voltage-adapting input circuit to maintain the maximum source signal level without clipping.
General Features:
Power Stack capable with the Alpine iLX-W650
compact mono subwoofer amplifier
Alpine’s Class D Amplifier Circuit with DPP
Dynamic Peak Power (DPP) technology adds a burst of power when needed
CTA-2006 compliant
100W x 1 RMS @ 4Ω, Power Outputs
200W x 1 RMS @ 2Ω, Power Outputs
400W x 1 DPP @ 4Ω, Power Outputs
Signal to Noise Ratio 85dB (ref. 1W into 4Ω)
≤0.1% THD+N (ref. 10W into 2Ω)
Single-side 22-pin connector
selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave)
preamp and speaker-level inputs
RCA inputs (selectable, Low range=0.2-4V)
Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
wiring, hardware, and fuse not included with the amplifier
Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver
Authorized Dealer
1-year Warranty
Alpine SWT-S10 1200W Max Single 10" Sealed Subwoofer Bass Tube Enclosure
Combining the intense low-bass performance and ground-shaking output of the traditional Type-R subwoofers in a thin package optimized for tiny enclosures. The SWT 10” Truck Subwoofer has been engineered to offer more installation flexibility without sacrificing enormous output to build the ideal sound system for your truck. At 4-1/8” deep. These subs provide deep bass performance where it usually couldn’t fit in a car. And the vented pole optimized for a 4-1/8” deep box is the ideal enclosure size, meaning excellent bass performance can fit just about anywhere in your truck.
General Features:
Single 10" Sealed Subwoofer Tube Enclosure
1200 Watts MAX Power Handling
250 Watts RMS Power Handling
Final Impedance: 4 ohms
Preloaded with a single 10" Subwoofer
Sealed enclosure with embroidered black carpet
Enclosure Dimensions: 11.25"W x 23.65" D
1-year Manufacturer's Warranty
Subwoofer Features:
10" Passive Subwoofer
Push SPK Terminal
Frequency Response: 35-200 Hz
Sensitivity: 90dB
Enclosure Features:
Tube enclosure
Black Carpet Finish with White Alpine Logo
Grille included
What is in the SWT-S10 package:
W10S4 owner's manual
One 10" Subwoofer per box
Adhesive-backed foam gasket
Application Guide
Online product registration information
Warranty Information
Alpine RUX-KNOB.2 Remote Bass KnobWith the RUX-KNOB, get complete control over your PDX-M6 or PDX-M12 amplifier conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine KTA-200M Mono Power Pack Amp with Alpine W10S4 10" Subwoofer and Bass Knob
$335.87
$699.98
Alpine KTA-200M Mono Power Pack Amp with Alpine W10S4 10" Subwoofer and Bass Knob
Alpine KTA-200M Mono Power Pack Amp with Alpine W10S4 10" Subwoofer and Bass Knob - This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine W10S4 10-inch Single 4 Ohm Subwoofer, an Alpine RUX-KNOB.2 Remote Bass Knob, a pry kit, and an Alpine cozy.Alpine KTA-200M Mono 400-Watt Power Pack AmplifierThe KTA-200M fits in the open space behind Alpines iLX-W670 iLX-W650 7-inch Mech-Less (no CD/ DVD) Audio/Video receiver to create Alpines unique PowerStack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W670 iLX-W650 (1.9-inch D) occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. PowerStack capable with the Alpine iLX-W670 iLX-W650
Alpines Class D Amplifier Circuit w/ Dynamic Peak Power (DPP)
100W x 1 RMS (4, 14.4V, 1% THD+N)
200W x 1 RMS (2, 14.4V, 1% THD+N)
400W x 1 DPP (2, 14.4V, 1% THD+N)
>85dB S/N (ref. 1W into 4)
0.1% THD+N (ref. 10W into 2)
Single-side 22-pin connector
RCA inputs (selectable, Low range=0.2-4V)
Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
Alpine W10S4 10-inch Single 4 Ohm SubwooferOverview:
10-inch single 4 subwoofer
250W RMS
750W peak power handling
Frequency Response: 30Hz-200Hz
24Hz-200Hz frequency response
5-1/16-inch mounting depth
Recommended Sealed box volume: 0.83 cu. Ft.
Recommended Ported box volume: 1.51 cu. ft
Alpine RUX-KNOB.2 Remote Bass KnobWith the RUX-KNOB, get full control over your amplifier, conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine KTA-200M Mono Power Pack Amp with Alpine W12S4 12" Subwoofer and Bass Knob
$336.87
$649.99
Alpine KTA-200M Mono Power Pack Amp with Alpine W12S4 12" Subwoofer and Bass Knob
Alpine KTA-200M Mono Power Pack Amp with Alpine W12S4 12" Subwoofer and Bass Knob - This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine W12S4 12-inch Single 4 Ohm Subwoofer, an Alpine RUX-KNOB.2 Remote Bass Knob, a pry kit, and an Alpine cozy.Alpine KTA-200M Mono 400-Watt Power Pack AmplifierThe KTA-200M fits in the open space behind Alpines iLX-W650 7-inch Mech-Less (no CD/ DVD) Audio/Video receiver to create Alpines unique PowerStack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D) occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space.
CTA-2006
PowerStack capable with the Alpine iLX-W650
Alpines Class D Amplifier Circuit w/ Dynamic Peak Power (DPP)
100W x 1 RMS (4, 14.4V, 1% THD+N)
200W x 1 RMS (2, 14.4V, 1% THD+N)
400W x 1 DPP (2, 14.4V, 1% THD+N)
>85dB S/N (ref. 1W into 4)
0.1% THD+N (ref. 10W into 2)
Single-side 22-pin connector
RCA inputs (selectable, Low range=0.2-4V)
Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
Alpine W12S4 12-inch Single 4 Ohm SubwooferOverview:
12-inch single 4 subwoofer
250W RMS
750W peak power handling
Frequency Response: 32Hz-200Hz
5-5/16-inch mounting depth
Recommended Sealed box volume: 1.09 cu. Ft.
Recommended Ported box volume: 1.91 cu. ft
What's in the W12S4 package:
One 12" Subwoofer
Adhesive-backed foam gasket
Application Guide
Online product registration information
Warranty information
Important Notice!
W12S4 owner's manual
Alpine RUX-KNOB.2 Remote Bass KnobWith the RUX-KNOB, get full control over your amplifier, conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine KTA-200M Mono Power Pack Amp with S-W12D2 12" Subwoofer and Bass Knob
$395.90
$695.95
Alpine KTA-200M Mono Power Pack Amp with S-W12D2 12" Subwoofer and Bass Knob
This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine S-W12D2 S-Series 12" Dual 2-Ohm Subwoofer.
Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier
The KTA-200M fits in the open space behind Alpine’s iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D) occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier, in a compact size, easy installation, and overall power. Both amplifiers, while designed to “stack” behind the iLX-W650, or similar 2-DIN radio, can also be used as standalone solutions in vehicles that don’t have space for a traditional amplifier. the KTA-200M produces 400 watts with Alpine’s DPP technology. During powerful, or “dynamic,” passages of music, DPP will adapt to the needs of the music by adjusting the gain of the amplifier and delivering bursts of power that match the peak demands of the music. Alongside that is the new voltage-adapting input circuit to maintain the maximum source signal level without clipping.
General Features:
Power Stack capable with the Alpine iLX-W650
compact mono subwoofer amplifier
Alpine’s Class D Amplifier Circuit with DPP
Dynamic Peak Power (DPP) technology adds a burst of power when needed
CTA-2006 compliant
100W x 1 RMS @ 4Ω, Power Outputs
200W x 1 RMS @ 2Ω, Power Outputs
400W x 1 DPP @ 4Ω, Power Outputs
Signal to Noise Ratio 85dB (ref. 1W into 4Ω)
≤0.1% THD+N (ref. 10W into 2Ω)
Single-side 22-pin connector
selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave)
preamp and speaker-level inputs
RCA inputs (selectable, Low range=0.2-4V)
Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
wiring, hardware, and fuse not included with the amplifier
Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver
Authorized Dealer
1-year Warranty
Alpine S-W12D2 S-Series 12" Subwoofer with Dual 2-Ohm Voice coils.General Features:
High Amplitude Multi-Roll Surround
High Strength Steel Frame
Perimeter venting with airflow management system
High-excursion underhung voice coil configuration
Compound radius curve extended pole geometry
Airflow-optimized dual flare pole vent
65mm voice coil with high-temp 5-layer DVC winding on aluminum former
high-grade strontium ferrite magnets
15MM Xmax
64mm Xmech
600W RMS
5-1/16" mounting depth
10-9/16" Cutout Diameter
Power handling: 250-600W RMS
Sealed Enclosure range: .55-1.0 ft^3
Vented Enclosure Range: 1.0-1.5 ft^3
Vented tuning range: 32-37Hz
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-W12D2 RUX-KNOB.2 KTA-200M Mono Power Pack Amp with 12" Subwoofer and Bass Knob
$409.85
$799.95
Alpine KTA-200M Mono Power Pack Amp with Alpine S-W12D2 12" Subwoofer and Bass Knob
This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine S-W12D2 S-Series 12" Dual 2-Ohm Subwoofer, and an Alpine RUX-KNOB.2 Remote Bass Knob.
Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier
The KTA-200M fits in the open space behind Alpine’s iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D) occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier, in a compact size, easy installation, and overall power. Both amplifiers, while designed to “stack” behind the iLX-W650, or similar 2-DIN radio, can also be used as standalone solutions in vehicles that don’t have space for a traditional amplifier. the KTA-200M produces 400 watts with Alpine’s DPP technology. During powerful, or “dynamic,” passages of music, DPP will adapt to the needs of the music by adjusting the gain of the amplifier and delivering bursts of power that match the peak demands of the music. Alongside that is the new voltage-adapting input circuit to maintain the maximum source signal level without clipping.
General Features:
Power Stack capable with the Alpine iLX-W650
compact mono subwoofer amplifier
Alpine’s Class D Amplifier Circuit with DPP
Dynamic Peak Power (DPP) technology adds a burst of power when needed
CTA-2006 compliant
100W x 1 RMS @ 4Ω, Power Outputs
200W x 1 RMS @ 2Ω, Power Outputs
400W x 1 DPP @ 4Ω, Power Outputs
Signal to Noise Ratio 85dB (ref. 1W into 4Ω)
≤0.1% THD+N (ref. 10W into 2Ω)
Single-side 22-pin connector
selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave)
preamp and speaker-level inputs
RCA inputs (selectable, Low range=0.2-4V)
Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
wiring, hardware, and fuse not included with the amplifier
Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver
Authorized Dealer
1-year Warranty
Alpine S-W12D2 S-Series 12" Subwoofer with Dual 2-Ohm Voice coils.General Features:
High Amplitude Multi-Roll Surround
High Strength Steel Frame
Perimeter venting with an airflow management system
High-excursion underhung voice coil configuration
Compound radius curve extended pole geometry
Airflow-optimized dual flare pole vent
65mm voice coil with high-temp 5-layer DVC winding on aluminum former
high-grade strontium ferrite magnets
15MM Xmax
64mm Xmech
600W RMS
5-1/16" mounting depth
10-9/16" Cutout Diameter
Power handling: 250-600W RMS
Sealed Enclosure range: .55-1.0 ft^3
Vented Enclosure Range: 1.0-1.5 ft^3
Vented tuning range: 32-37Hz
Alpine RUX-KNOB.2 Remote Bass KnobWith the RUX-KNOB, get full control over your PDX-M6 or PDX-M12 amplifier, conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-W10D2 RUX-KNOB.2 KTA-200M Mono Power Pack Class-D Amp with S-W10D2 10" Subwoofer and RUX-KNOB.2 Bass Knob
$409.85
$799.99
Alpine KTA-200M Mono Power Pack Amp with Alpine S-W10D2 10" Subwoofer and Bass Knob
This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine S-W10D2 S-Series 10" Dual 2-Ohm Subwoofer, and an Alpine RUX-KNOB.2 Remote Bass Knob.
Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier
General Features:
Power Stack capable with the Alpine iLX-W650
compact mono subwoofer amplifier
Alpine’s Class D Amplifier Circuit with DPP
Dynamic Peak Power (DPP) technology adds a burst of power when needed
CTA-2006 compliant
100W x 1 RMS @ 4Ω, Power Outputs
200W x 1 RMS @ 2Ω, Power Outputs
400W x 1 DPP @ 4Ω, Power Outputs
Signal to Noise Ratio 85dB (ref. 1W into 4Ω)
≤0.1% THD+N (ref. 10W into 2Ω)
Single-side 22-pin connector
selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave)
preamp and speaker-level inputs
RCA inputs (selectable, Low range=0.2-4V)
Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
wiring, hardware, and fuse not included with the amplifier
Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver
Authorized Dealer
1-year Warranty
Alpine S-W10D2 S-Series 10" Subwoofer with Dual 2-Ohm Voice Coils.
General Features:
10" 2 ohm S-Series (Type-S) Subwoofer
RMS Power Handling: 600 watts
Peak Power Handling: 1800 watts
Recommended power range: 250- 600W RMS
Pulp/Kevlar Cone
High Amplitude Multi-Roll (HAMR) Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Optimized Dual Flare Pole Vent
High Strength Steel Frame Basket
8 AWG Push Terminals with VC Configuration Jumpers
Dual Voice Coil
High-Grade Strontium Ferrite Magnets
Top-mount depth: 4-11/16"
Cutout diameter: 8-13/16
Frequency Response: 26- 200Hz
Sensitivity: 86.4dB
Resonance Frequency (Fs): 33 Hz
Authorized Dealer
1-year Manufacturer's Warranty
Alpine RUX-KNOB.2 Remote Bass KnobWith the RUX-KNOB, get full control over your amplifier conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine ILX-W670 7" Shallow-Chassis Multimedia Receiver with Jeep Wrangler 03-06 Dash Kit, Wiring Harness and Antenna Adapter
$379.99
$999.99
Alpine ILX-W670 7" Shallow-Chassis Multimedia Receiver with Jeep Wrangler 03-06 Dash Kit, Wiring Harness, and Antenna Adapter
Jeep Wrangler 03-06 Dash Kit, Wiring Harness and Antenna Adapter with Alpine ILX-W670 7" Shallow-Chassis Multimedia Receiver - This bundle includes an Alpine iLX-W670 Digital Multimedia Receiver with CarPlay and Android Auto Compatibility, a Metra 95-6541 Dash Kit Compatible with Jeep Wrangler 2003-2006, a Metra 70-6502 Wiring Harness Compatible with Chrysler 2002-2009, a Metra 40-CR10 Antenna Adapter Cable Compatible with Chrysler/Dodge/Ford/GM/Jeep 20002 and Up, a pry kit.Alpine iLX-W670 Digital Multimedia Receiver with CarPlay and Android Auto Compatibility
General Features:
digital media receiver with AM/FM tuner (does not play CDs)
shallow-mount chassis design (2-7/16" deep)
designed to pair with Alpine's KTA-450 power pack amplifier
touchscreen swipe controls
designed to work with CarPlay and Android Auto
hands-free control lets you access apps using your voice
built-in Bluetooth connectivity
enjoy music apps like Pandora and Spotify
built-in amplifier (18 watts RMS CEA-2006/50 peak x 4 channels)
USB port accommodates various devices and thumb drives
FLAC Compatible
7" capacitive touchscreen
Smartphone Features:
designed to work with CarPlay and Android Auto
built-in iPod, iPhone, and iPad control
Android control through USB
Metra 95-6541 Dash Kit Compatible with Jeep Wrangler 2003-2006
ISO DDIN radio provision
Painted black to match the factory dash panel
Wiring & Antenna Connections
Metra 70-6502
Wiring Harness Compatible with Chrysler 2002-2009
Plugs into Car Harness at radio
Power 4 Speakers
Metra 40-CR10
Antenna Adapter Cable Compatible with Chrysler/Dodge/Ford/GM/Jeep 20002 and Up
Chrysler factory antenna adapter
Snap-lock to aftermarket radio
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine W10S4 10-inch Single 4 Ohm Subwoofer Bundle
$199.95
$250.00
2 Alpine W10S4 10" Bass Subwoofer 750W Max (250W RMS) 10" BassLine Series Single 4 ohm Car Subwoofer
Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.The surround and wattage match made in heaven.The 250 watts of continuous power that the W10S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features:
10" Single 4-ohm BassLine (Bass) Series Subwoofer
Power Handling:
Peak: 750 watts
RMS: 250 watts
Recommended power range: 50W - 250W RMS
Polypropylene-Mica cone
High-excursion poly-foam surround
Progressive Wavelet Ribs (P.W.R.) cone design
An optional Alpine KTE-10PG subwoofer grill is available and is a wonderful complement to the trim ring with the Alpine logo
High-strength custom steel frame
8AWG push terminals
2" voice coil
52oz. magnet
Top-mount depth: 5-1/16"
Cutout diameter: 9"
Frequency Response: 24 - 200Hz
Sensitivity: 86.6dB
Resonance Frequency (Fs): 32
Authorized Dealer
1-year Manufacturer's Warranty
What's in the W10S4 package:
W10S4 owner's manual
One 10" Subwoofer per box
Adhesive-backed foam gasket
Application Guide
Online product registration information
Warranty Information
Important Notice!
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Mono and KTA-30FW 4-Channel Weather Resistant Amplifiers
$1,199.85
$1,500.00
Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Mono and KTA-30FW 4-Channel Weather-Resistant Amplifiers
Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Mono and KTA-30FW 4-Channel Weather-Resistant Amplifiers - This bundle includes an Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms, an Alpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack Amplifier, a pry kit, and an Alpine cozy.Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2 Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch DAlpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-OhmsSpecifications: Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.) Weather resistant (IP66 rating) 300W x 1 D.P.P. (2, 14.4V, 1% THD+N) CTA-2006-B Specifications: 200W RMS x 1 (4, 14.4V, 1% THD+N) 82dB S/N (ref. 1W into 4) >0.05% THD OEM-grade Tyco 26-pin connector with pigtail wire harness Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)Sound control: Crossovers: Off/HP/LP, Fc=50-400Hz @ -12dB/Oct. (variable) Input gain settings (variable) 2ch inputAlpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack AmplifierSpecifications: Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.) Weather resistant (IP66 rating) 150W x 4 D.P.P. (2/4, 14.4V, 1% THD+N) CTA-2006-B Specifications: 75W RMS x 4 (2/4, 14.4V, 1% THD+N) 82dB S/N (ref. 1W into 4) >0.05% THD OEM-grade Tyco 26-pin connector with pigtail wire harness Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine KTA-200M Mono Power Pack Amp with Alpine W12S4 12" Subwoofer
$319.99
$649.80
Alpine KTA-200M Mono Power Pack Amp with Alpine W12S4 12" Subwoofer
Alpine KTA-200M Mono Power Pack Amp with Alpine W12S4 12" Subwoofer and Bass Knob - This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine W12S4 12-inch Single 4 Ohm Subwoofer, a pry kit, and an Alpine cozy.Alpine KTA-200M Mono 400-Watt Power Pack AmplifierThe KTA-200M fits in the open space behind Alpines iLX-W650 7-inch Mech-Less (no CD/ DVD) Audio/Video receiver to create Alpines unique PowerStack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D) occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space.
CTA-2006
PowerStack capable with the Alpine iLX-W650
Alpines Class D Amplifier Circuit w/ Dynamic Peak Power (DPP)
100W x 1 RMS (4, 14.4V, 1% THD+N)
200W x 1 RMS (2, 14.4V, 1% THD+N)
400W x 1 DPP (2, 14.4V, 1% THD+N)
>85dB S/N (ref. 1W into 4)
0.1% THD+N (ref. 10W into 2)
Single-side 22-pin connector
RCA inputs (selectable, Low range=0.2-4V)
Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
Alpine W12S4 12-inch Single 4 Ohm SubwooferOverview:
12-inch single 4 subwoofer
250W RMS
750W peak power handling
Frequency Response: 32Hz-200Hz
5-5/16-inch mounting depth
Recommended Sealed box volume: 1.09 cu. Ft.
Recommended Ported box volume: 1.91 cu. ft
Performance: Efficiency & Tight Bass
An optimized magnet circuit allows more focused magnetism in the gap which results in improved efficiency. This means tighter bass control and more output!
What's in the W12S4 package:
One 12" Subwoofer
Adhesive-backed foam gasket
Application Guide
Online product registration information
Warranty information
Important Notice!
W12S4 owner's manual
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Type-S Speaker and Amp Bundle 6.5" S-S65C Component Set S-S65 Coaxials with S-A32F Amplifier
$469.85
$650.00
Alpine Type-S Speaker and Amp Bundle 6.5" S-S65C Component Set S-S65 Coaxials with S-A32F Amplifier & Absolue KIT4
This bundle includes an Alpine S-32F Amplifier, a pair of Alpine S-S65C S-Series 6.5-inch Component 2-Way Speakers, a pair of Alpine S-S65 S-Series 6.5-inch Coaxial 2-Way Speakers & a wiring kit.
Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier
The all-new S-Series amplifiers pack a punch with even more performance and value. Experience hard-hitting bass and long hours of limitless play with the S-A32F 4-channel amplifier.
These amplifiers offer great value with over 20% more power through increased watt handling. The exceptional strength and resistance are supported by optimizing a heat thermal management processor to ensure exceptional reliability. You can enjoy your music with the bass cranked up for hours without any power shutdown.General Features:
Alpine S-Series S-A32F 4/3/2 Channel Power Amplifier
S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.
S-Series Amplifier: Known for reliable performance and value-oriented products.
Power Output:
55W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N)
80W RMS x 4 (2ohm, 14.4V≤ 1% THD+N)
Bridged: 160W RMS x 2 (4ohm, 14.4V ≤ 1% THD+N)
Total power output: 320 watts
CEA-2006 Compliant Amplifier
LED Power/Protect Light
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and short speaker protection)
Frequency Response: 10 - 30,0000 Hz
Total Harmonic Distortion (THD): <1%
Signal Noise Ratio: 83 dB
Variable high-pass filter: 50 - 400 Hz, 12 dB/octave
Variable low-pass filter: 50 - 400 Hz, 12 dB/octave
Fuse Rating: 40
Improved heat sink and protection circuit design
Contain technology currently implemented in the Alpine R and X-Series models
105dB Signal-to-Noise (S/N) ratio at rated power
46 degrees of phase shift
Designed to perform perfectly with the existing S-Series speakers and subwoofers
Dimensions: 8” W x 8” H x 2.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S-A32F package:
S-A32F owner's manual
4-Channel amplifier
One 40-amp ATO fuse
Four 3/4" Screws
2mm Allen wrench
Alpine Verification Certificate
Warranty information
Online product registration information
Alpine S-S65C & S-S65 6.5" SpeakersThe new cosmetics of the S-Series look good in nearly any car, and their shallow mounting design allows for easy installation in a wide range of door panels. As well, their high-efficiency design can run off of the power from the factory or Alpine head unit, resulting in an easy system improvement for any vehicle.CEA-2031 Speaker rating: 80W maximum RMS, 240W peak power handling, nominal impedance 4Frequency response: 70Hz - 22kHz6-1/2" 2-way component & Coaxial speakerscarbon-fiber-reinforced plastic woofer cone with specialized rubber surround3/4" silk dome tweetersensitivity: 88 dBmounting diameter: 5 1/16"mounting depth: 2-5/16"grills not includedwarranty: 1 year
⚠️Warning:
This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.