00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Bundle 1-Pair SPE-6090 6x9" Coax speakers, 1-Pair SPE-5000 5.25" Coax, BBX-F1200 280W 4-Ch Amp and Wiring
$349.99
$599.99
Alpine Bundle 1-Pair SPE-6090 6x9" Coax speakers, 1-Pair SPE-5000 5.25" Coax, BBX-F1200 280W 4-Ch Amp, and Wiring
Alpine Bundle 1-Pair SPE-6090 6x9" Coax speakers, 1-Pair SPE-5000 5.25" Coax, BBX-F1200 280W 4-Ch Amp and Wiring - This bundle includes a pair of the Alpine SPE-6090 6X9" Coaxial 2-Way Speaker Set, a pair of the Alpine SPE-5000 5-1/4" Coaxial 2-Way Speaker Set, an Alpine BBX-F1200 280 Watt 4-Channel Amplifier, a wiring kit, a pry kit, and an Alpine cozy.
Alpine SPE-6090 600W Peak (150W RMS) 6x9" 2-Way Type-E Series Coaxial Speakers w/ Silk Tweeters
General Features
6" x 9" Type-E Coaxial 2-way Car Speakers
Peak Power Handling: 600 watts per pair / 300 watts each
RMS Power Handling: 150 watts per pair / 75 watts each
Polypropylene cone pearl mica injection
3/4" Silk soft dome tweeter
Tweeter Magnet: Neodymium
Woofer Magnet: Ferrite
4 ohms impedance
Square voice coil wire
Injection-molded frame
Frequency Response: 65-18,000 Hz
Sensitivity: 91 dB
Top-Mount Depth: 3"
Mounting Diameter: 5-15/16" x 8-3/4"
Authorized Internet Dealer
1-year Warranty
Alpine SPE-5000 5-1/4" Coaxial 2-Way Speaker Set (Pair)
RMS Power Handling: 50W
Peak Power Handling: 200W
Frequency Response: 82Hz - 20kHz
Outfitted with a sleek, lightweight outer mesh grill, Type-E speakers serve both form and function.
Type-E speakers are developed off of soft dome tweeters to output quality sound
Alpine BBX-F1200 - 4-Channel Amplifier
Amplifier Type: Class-A/B
Channel Design: 4/3/2 Channel
Total Max Power: 600W
Per Channel into 4ohms (1%THD+N): 4 x 50W
Per Channel into 2ohms (1%THD+N): 4 x 70W
Bridged into 4ohms (1%THD+N): 2 x 130W
Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB)
Footprint: 330 mm x 52 mm x 240 mm
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine BBX-F1200 Amplifier with Alpine S-S69C 6X9 Component Set, S-S50 5.25" Coax Speakers and Wiring Kit
$387.95
$800.00
Alpine BBX-F1200 Amplifier with Alpine S-S69C 6X9 Component Set, S-S50 5.25" Coax Speakers, and Absolute 8 Gauge Wiring Kit
This bundle includes an Alpine BBX-F1200 4-Channel Amplifier, an 8 Gauge Wiring Kit, a pair of Alpine S-Series S-S69C 6x9" Component Speakers, and a pair of Alpine S-S50 S-Series 5.25-inch Coaxial 2-Way Speakers.
Alpine BBX-F1200 600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier
This new BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system.
High Power, Great Value
This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget.
High Pass and Low Pass Filters
These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency.
Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass.
General Features:
Alpine BBX-F1200
Class-A/B 2-ohm Stable 4-Channel Amplifier
RMS Power Rating:
4 ohms: 50 watts x 4 channel
2 ohms: 70 watts x 4 channel
1 ohm: ------------N/A------------
Bridged, 4 ohms: 130 watts x 2 channel
Total power output: 600 watts
Pulse Width Modulated MOSFET power supply
LED power (green) and protect (red) indicators
Soft start turn-on
4/3/2 or channel operation
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity: .2V - 8V
Frequency Response: 5 - 50000 Hz
Total Harmonic Distortion (THD): <1%
Signal Noise Ratio: 95dB
Variable high-pass filter: 50 - 500 Hz
Variable low-pass filter: 50 - 500 Hz
Variable Bass Boost: 0 to +12 dB bass boost
Fuse Rating: 40A x 1
Dimensions: 9.4"W x 12.9"L x 2"H
Authorized Dealer
1-year Manufacturer's Warranty.
Alpine S-S69C 520W Max (170W RMS) 6" x 9" Type-S Series 2-Way Component Car Speakers
Alpine's S-Series Speakers have been redesigned with upgrades to voice coil size and cone material to provide premium sound quality. The new benchmark for entry OEM upgrades!
UNIVERSAL APPLICATIONSTo meet the needs of the most common applications in speaker replacement today, we’ve introduced a new 6x9-inch component speaker set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. This component set, with its innovative technology, makes it a simple solution to getting Alpine sound in many of these vehicles on the road today.
EFFICIENT PERFORMANCE
The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.
General Features:
6" x 9" Type-S Series 2-Way Component System
Power Handling:
Peak: 520 watts per set / 260 watts on each side
RMS: 175 watts per set / 85 watts on each side
Carbon-reinforced polypropylene cone
Rubber surround
1" Silk dome tweeter
CEA-2031 compliant speakers
Top-mount Depth: 2-15/16"
4 ohms impedance
Frequency Response: 65 - 22000 Hz
Sensitivity: 90dB
1 year manufactures warranty
What is in the S-S69C package:
S-S69C owner's manual
2 Woofers
2 Tweeters
2 Flush mount housings
2 Tweeter grilles
Two 37" Tweeter wires with in-line crossovers
2 Flush mount retention rings
2 Stealth brackets
Eight 1-3/16" Screws
Eight M4x60mm Machine screws (each screw has a lock washer attached)
Eight M4 Nuts
8 Speed clips
8 Split lock washers
8 Spacers
Warranty information
Alpine S-S50 340W Max (110W RMS) 5 1/4" Type S Series 2-Way Coaxial Car Speakers
FITS IN MOST COMMON APPLICATIONS
To meet the needs of the most common applications in speaker replacement today, we've introduced a 5 1/4inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality in their vehicle. This component set, with its innovative technology, makes it a simple solution to getting Alpine sound in many of these vehicles on the road today.
INCREASED DRIVING POWER AND CONTROL
The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.
General Features:
5 1/4" S-Type Series TYPE Car Speakers/Component System
Power Handling:
Peak: 340 watts per pair / 170 watts each
RMS: 110 watts per pair / 55 watts each
Carbon fiber reinforced plastic cone
Patented HAMR surround
3/4" Silk dome tweeter
CTA-2031 compliant speakers
30MM Voice Coil
Top-mount Depth: 2"
4 ohms impedance
Frequency Response: 73 - 22000 Hz
Sensitivity: 88dB
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S-S50 package:
Two 2-way speakers
2 Adapter rings
Two 12" Lengths of speaker wire (each has quick slides on one end and bare wire on the other)
Eight 1-1/4" Screws
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
Alpine S-S50 owner's manual
⚠️Warning:Cancer and Reproductive Harm, go to www.P65Warning
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R-S65C.2 100W RMS 6.5" R-Series Component 2-Way Speakers
$429.90
$999.95
2 Alpine R-S65C.2 100W RMS 6.5" R-Series Component 2-Way Speakers
TURN IT UP
If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers.
General Features:
6.5-inch R-Series Component 2-way Car Speakers
component speaker system includes two woofers, 2 tweeters, and 2 external crossovers
Power Handling:
Peak: 300 watts
RMS: 100 watts
4 Ohms impedance
Frequency response: 65Hz-40kHz
Carbon Fiber Reinforced Polymer (CFRP) exclusive cone technology
CFRP increases the speakers’ mid-bass performance and dynamic range
CFRP is used as a tweeter diaphragm, enabling the system to perform up into the 45kHz range, making the speakers compliant with High-Resolution Audio playback
Patented High-Amplitude Multi-Roll (HAMR) surround, for control and accuracy
Ideal for tight installations and use matching speaker grills that are shallower as well (sold separately)
Uses an in-line, passive design with a reduced footprint, which also contributes to easier installation
Authorized Dealer
1-year Manufacturer's Warranty
What's in the R-S65C.2 package:
2 Woofers
Two 6-1/2" Adapter rings (includes GM/Chrysler)
Two 6x8 Adapter rings
2 Woofer grilles
2 Grille badges
2 Tweeters (each has an attached 30" length of wire)
2 Tweeter grilles (installed)
2 Swivel flush mount housings (with tweeters installed)
Two crossovers (each has attached input and output wires)
2 Flush mount retention rings
2 Stealth brackets
2 Foam self-adhesive pads
2 Foam self-adhesive rings
Eight 1-1/8" Screws
Eight 1/2" Screws
8 Speed-clips
Eight M4x12mm Machine screws
Four 5" Zip ties
2 Pieces of two-sided tape
Warranty information
Online product registration note
Important Notice sheet
Template and specs on the box
R-S65C.2 owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Bundle 2-Pairs of SXE-1726s 6.5" Coax Speakers and BBX-F1200 280W 4-Ch Amp and Wiring
$299.99
$350.00
Alpine Bundle 2-Pairs of SXE-1726s 6.5" Coax Speakers and BBX-F1200 280W 4-Ch Amp and Wiring
This bundle includes 2 pairs of the Alpine SXE-1726S 6 1/2" 2-way Coaxial Speaker, an Alpine BBX-F1200 280 Watt 4-Channel Amplifier, a wiring kit, a pry kit, and an Alpine cozy.Alpine SXE-1726S 6 1/2" 2-way Coaxial Speaker
RMS Power: 40 Watts
Peak Power: 220 Watts
Nominal Impedance: 4 Ohms
Frequency Response 60Hz-20kHzVoice Coil: Kapton
Woofer Magnet: Ferrite
Tweeter Magnet: Neodym
Alpine BBX-F1200 4 Channel Amplifier4 channel power amplifier 4/3/2 channel 600 wattsThis new BBX amplifier gives you Alpine power performance at an amazing price. And they're designed to fit easily in virtually any system.High Power, Great ValueThis amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget.High Pass and Low Pass FiltersThese two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency.Bass EQ for Best BassPerformance With Bass EQ, you can maximize the performance of your system and get even more powerful bass.
Alpine BBX-F1200 - 4 Channel Amplifier
Amplifier Type: Class-A/B
Channel Design: 4/3/2 Channel
Total Max Power: 600W
Per Channel into 4ohms (1%THD+N): 4 x 50W
Per Channel into 2ohms (1%THD+N): 4 x 70W
Bridged into 4ohms (1%THD+N): 2 x 130W
Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB)
Footprint: 330 mm x 52 mm x 240 mm
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Bundle 2-Pair SPE-5000 5.25" Coax speakers with BBX-F1200 280W 4-Ch Amp and Wiring
$319.99
$599.99
Alpine Bundle 2-Pair SPE-5000 5.25" Coax speakers with BBX-F1200 280W 4-Ch Amp and Wiring
Alpine Bundle 2-Pair SPE-5000 5.25" Coax speakers with BBX-F1200 280W 4-Ch Amp and Wiring - This bundle includes 2 pairs of the Alpine SPE-5000 5-1/4" Coaxial 2-Way Speaker Set, an Alpine BBX-F1200 280 Watt 4-Channel Amplifier, a wiring kit, a pry kit, and an Alpine cozy.Alpine SPE-5000 5-1/4" Coaxial 2-Way Speaker Set (Pair)Hearing is BelievingStep up your factory speakers to an affordable upgrade with the all-new Alpine Type-E speakers, for a performance-packed sound quality you expect from Alpine.Quality over QuantityJust because you want better sound in your car, doesn't mean you have to break your budget. The Type-E speakers are the perfect, affordable option if you simply need replacement speakers or even want to start building a sound system.Soft Dome Tweeter TechnologyTo output quality sound, the Type-E speakers are developed off of soft dome tweeters, rather than traditional cone-type tweeters which can be harsh. This results in a more enjoyable listening experience in the car when playing back your music or other entertainment over your sound system.Let Me See Your GrillOutfitted with a sleek, lightweight outer mesh grill, Type-E speakers serve both form and function. The dark, solid protective grill is an attractive upgrade to standard factory speakers.
General Features:
5-1/4" 2-way speakers
pearl mica-injected polypropylene woofer cone with specialized rubber surround
3/4" silk dome tweeter
handles up to 100 watts RMS (200 watts peak power)
frequency response: 82-20,000 Hz
sensitivity: 87.5 dB
impedance: 4 ohms
top-mount depth: 1-11/16"
grilles included
warranty: 1 year
Two 2-way speakers
2 Grilles
Eight 1" Screws
8 Speed clips
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
Alpine BBX-F1200 280 Watt 4-Channel Amplifier
Alpine BBX-F1200 - 4 Channel Amplifier
Amplifier Type: Class-A/B
Channel Design: 4/3/2 Channel
Total Max Power: 600W
Per Channel into 4ohms (1%THD+N): 4 x 50W
Per Channel into 2ohms (1%THD+N): 4 x 70W
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine BBX-F1200 Amplifier with Two Pair Of Alpine S-S40 4" Coax Speakers, and Wiring Kit
$319.99
$639.99
Alpine BBX-F1200 Amplifier with Two Pair Of Alpine S-S40 4" Coax Speakers and Wiring Kit
This bundle includes an Alpine BBX-F1200 4-Channel V-Power Amplifier, an 8 Gauge Wiring Kit, and two Alpine S-S40 S-Series 4-inch Coaxial 2-Way Speakers. Absolute TW-600 600 Watts MAX High-Efficiency Dome Tweeter with Built-In Crossover.
Absolute USA BT1700 General Use 0.18mm x 3/4-Inch x 20Yd Electrical Tape (Black)
Universal 360 Degree Rotation and Swivel Mobile Bracket Holder BBX-F1200 4-channel power amplifier 4-channel 600 watts This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget. Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass. Alpine BBX-F1200 - 4-Channel Amplifier Amplifier Type: Class-A/B Channel Design: 4/3/2 Channel Total Max Power: 600W Per Channel into 4ohms (1%THD+N): 4 x 50W Per Channel into 2ohms (1%THD+N): 4 x 70W Bridged into 4ohms (1%THD+N): 2 x 130W Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB) Footprint: 330 mm x 52 mm x 240 mm Alpine S-S40 S-Series 4-inch Coaxial 2-Way Speakers (pair) - Contains 4x6" Adapter Plate. The new cosmetics of the S-Series look good in nearly any car, and their shallow mounting design allows for easy installation in a wide range of door panels. As well, their high-efficiency design can run off of the power from the factory or Alpine head unit, resulting in an easy system improvement for any vehicle.
Alpine 2x S-S40 S-Series 4-inch Coaxial 2-Way Speakers (pair) - Contains 4x6" Adapter Plate Bundle
2x 4" 2-way speakers
carbon-fiber-reinforced plastic woofer cone with specialized rubber surround
3/4" silk dome tweeter
handles up to 45 watts RMS (140 watts peak power)
frequency response: 97-22,000 Hz
grilles not included
warranty: 1 year
4x 2-way speakers
4x 4x6 Adapter brackets
4x 12" Lengths of speaker wire (each has quick slides on one end and bare wire on the other)
Eight 3/4" Screws
Eight 5/16" Screws
Eight 1/4" Screws
8 Speed clips
8 Spacers
2 Adhesive backed gaskets
Warranty information
Online product registration information
Important Notice sheet
Absolute TW-600 600 Watts MAX High-Efficiency Dome Tweeter with Built-In Crossover (Pair)
Absolute USA BT1700 General Use 0.18mm x 3/4-Inch x 20Yd Electrical Tape (Black)
Universal 360 Degree Rotation and Swivel Mobile Bracket Holder
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:Cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.
Alpine Bundle 2-Pair SPE-6000 6.5" Coax speakers with BBX-F1200 280W 4-Ch Amp and Wiring
$378.85
Alpine Bundle 2-Pair SPE-6000 6.5" Coax speakers with BBX-F1200 280W 4-Ch Amp and Wiring
Alpine Bundle 2-Pair SPE-6000 6.5" Coax speakers with BBX-F1200 280W 4-Ch Amp and Wiring - This bundle includes 2 pairs of the Alpine SPE-6000 6-1/2" Coaxial 2-Way Speaker Set, an Alpine BBX-F1200 280 Watt 4-Channel Amplifier, a wiring kit, a pry kit, and an Alpine cozy.Alpine SPE-6000 6-1/2" Coaxial 2-Way Speaker Set (2x Pair)Hearing is BelievingStep up your factory speakers to an affordable upgrade with the all-new Alpine Type-E speakers, for performance packed sound quality you expect from Alpine.Quality over QuantityJust because you want better sound in your car, doesn't mean you have to break your budget. The Type-E speakers are the perfect, affordable option if you simply need replacement speakers or even want to start building a sound system.Soft Dome Tweeter TechnologyTo output quality sound, the Type-E speakers are developed off of soft dome tweeters, rather than traditional cone-type tweeters which can be harsh. This results in a more enjoyable listening experience in the car , when playing back your music or other entertainment over your sound system.Let Me See Your GrillOutfitted with a sleek, lightweight outer mesh grill, Type-E speakers serve both form and function. The dark, solid protective grill is an attractive upgrade to standard factory speakers.Alpine BBX-F1200 280 Watt 4-Channel Amplifier
Alpine BBX-F1200 - 4 Channel Amplifier
Amplifier Type: Class-A/B
Channel Design: 4/3/2 Channel
Total Max Power: 600W
Per Channel into 4ohms (1%THD+N): 4 x 50W
Per Channel into 2ohms (1%THD+N): 4 x 70W
Bridged into 4ohms (1%THD+N): 2 x 130W
Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB)
Footprint: 330 mm x 52 mm x 240 mm
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine BBX-F1200 Amplifier with Alpine S-S69C 6X9 Component, S-S69 6X9" Coax Speakers and Wiring Kit
$499.99
$750.00
Alpine BBX-F1200 Amplifier with Alpine S-S69C 6X9 Component, S-S69 6X9" Coax Speakers, and Wiring Kit
This bundle includes an Alpine BBX-F1200 4-Channel Amplifier, an 8 Gauge Wiring Kit, a pair of Alpine S-Series S-S69C 6x9" Component Speakers, and a pair of Alpine S-S69 S-Series 6x9-inch Coaxial 2-Way Speakers.Absolute TW-600 600 Watts MAX High-Efficiency Dome Tweeter with Built-In Crossover (Pair)Absolute USA BT1700 General Use 0.18mm x 3/4-Inch x 20Yd Electrical Tape (Black)Universal 360 Degree Rotation and Swivel Mobile Bracket HolderAlpine BBX-F1200 4-channel power amplifier 4-channel 600 wattsThis amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget.Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass.
Alpine BBX-F1200 - 4-Channel Amplifier
Amplifier Type: Class-A/B
Channel Design: 4/3/2 Channel
Total Max Power: 600W
Per Channel into 4ohms (1%THD+N): 4 x 50W
Per Channel into 2ohms (1%THD+N): 4 x 70W
Bridged into 4ohms (1%THD+N): 2 x 130W
Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB)
Footprint: 330 mm x 52 mm x 240 mm
Alpine S-S69C S-Series 6x9-inch Component 2-Way Speakers (pair)
CEA-2031 Speaker rating: 85W maximum RMS, 260W peak power handling, nominal impedance 4
component speaker system includes two woofers and two tweeters
6"x9" carbon-fiber-reinforced plastic woofer cone with specialized rubber surround
3/4" silk dome tweeter with inline crossover
frequency response: 65-22,000 Hz
sensitivity: 90 dB
woofer top-mount depth: 2-15/16"
grills not included
warranty: 1 year
Alpine S-S69 S-Series 6x9-inch Coaxial 2-Way Speakers (pair)
CEA-2031 Speaker rating: 85W maximum RMS, 260W peak power handling, nominal impedance 4
6"x9" 2-way speakers
6"x9" carbon-fiber-reinforced plastic woofer cone with specialized rubber surround
3/4" silk dome tweeter with inline crossover
frequency response: 65-22,000 Hz
sensitivity: 90 dB
woofer top-mount depth: 2-15/16"
grills not included
warranty: 1 year
Absolute TW-600 600 Watts MAX High-Efficiency Dome Tweeter with Built-In Crossover (Pair)Absolute USA BT1700 General Use 0.18mm x 3/4-Inch x 20Yd Electrical Tape (Black)Universal 360 Degree Rotation and Swivel Mobile Bracket Holder
⚠️Warning:Cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine BBX-F1200 Amplifier with Two Pair Of Alpine S-S69 6X9 Coax Speakers, and Wiring Kit
$406.85
$599.99
Alpine BBX-F1200 Amplifier with Two Pair Of Alpine S-S69 6X9 Coax Speakers, and Wiring Kit
This bundle includes an Alpine BBX-F1200 4-Channel Amplifier, an 8 Gauge Wiring Kit, and two pairs of Alpine S-Series S-S69 6x9" Coaxial Speakers.BBX-F12004 channel power amplifier 4-channel 600 wattsThis amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget.Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass.Alpine BBX-F1200 - 4-Channel AmplifierAmplifier Type: Class-A/BChannel Design: 4/3/2 ChannelTotal Max Power: 600WPer Channel into 4ohms (1%THD+N): 4 x 50WPer Channel into 2ohms (1%THD+N): 4 x 70WBridged into 4ohms (1%THD+N): 2 x 130WFrequency Response: 5 Hz - 50 kHz (+ 0,-3 dB)Footprint: 330 mm x 52 mm x 240 mmAlpine S-S69 S-Series 6x9-inch Coaxial 2-Way Speakers (pair)CEA-2031 Speaker rating: 85W maximum RMS, 260W peak power handling, nominal impedance 46"x9" 2-way speakers6"x9" carbon-fiber-reinforced plastic woofer cone with specialized rubber surround3/4" silk dome tweeter with inline crossoverfrequency response: 65-22,000 Hzsensitivity: 90 dBwoofer top-mount depth: 2-15/16"grills not includedwarranty: 1 year
⚠️Warning:Cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Bundle 2-Pair SPE-6090 6x9" Coax speakers, with BBX-F1200 280W 4-Ch Amp and Wiring
$499.99
$599.99
Alpine Bundle 2-Pair SPE-6090 6x9" Coax speakers, with BBX-F1200 280W 4-Ch Amp and Wiring
Alpine Bundle 2-Pair SPE-6090 6x9" Coax speakers, with BBX-F1200 280W 4-Ch Amp and Wiring - This bundle includes 2 pairs of Alpine SPE-6090 6X9" Coaxial 2-Way Speaker Set, an Alpine BBX-F1200 280 Watt 4-Channel Amplifier, a wiring kit, a pry kit, and an Alpine cozy.
Alpine SPE-6090 600W Peak (150W RMS) 6x9" 2-Way Type-E Series Coaxial Speakers w/ Silk Tweeters
General Features
6" x 9" Type-E Coaxial 2-way Car Speakers
Peak Power Handling: 600 watts per pair / 300 watts each
RMS Power Handling: 150 watts per pair / 75 watts each
Polypropylene cone pearl mica injection
3/4" Silk soft dome tweeter
Tweeter Magnet: Neodymium
Woofer Magnet: Ferrite
4 ohms impedance
Square voice coil wire
Injection-molded frame
Frequency Response: 65-18,000 Hz
Sensitivity: 91 dB
Top-Mount Depth: 3"
Mounting Diameter: 5-15/16" x 8-3/4"
Authorized Internet Dealer
1-year Warranty
Alpine BBX-F1200 - 4 Channel Amplifier
Amplifier Type: Class-A/B
Channel Design: 4/3/2 Channel
Total Max Power: 600W
Per Channel into 4ohms (1%THD+N): 4 x 50W
Per Channel into 2ohms (1%THD+N): 4 x 70W
Bridged into 4ohms (1%THD+N): 2 x 130W
Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB)
Footprint: 330 mm x 52 mm x 240 mm
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine BBX-F1200 Amplifier with Two Pair Of Alpine S-S57 5X7/6X8" Coax Speakers, and Wiring Kit
$406.85
$550.00
Alpine BBX-F1200 Amplifier with Two Pair Of Alpine S-S57 5X7/6X8" Coax Speakers, and Wiring Kit bundle
This bundle includes an Alpine BBX-F1200 4-Channel Amplifier, an 8 Gauge Wiring Kit, and two pairs of Alpine S-S57 S-Series 5x7-inch (6x8") Coaxial 2-Way Speakers, Absolute TW-600 600 Watts MAX High-Efficiency Dome Tweeter with Built-In Crossover (Pair), Absolute USA BT1700 General Use 0.18mm x 3/4-Inch x 20Yd Electrical Tape (Black), Universal 360 Degree Rotation and Swivel Mobile Bracket Holder
Alpine BBX-F1200 600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier
This new BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system.
High Power, Great Value
This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget.
High Pass and Low Pass Filters
These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency.
Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass.
General Features:
Alpine BBX-F1200
Class-A/B 2-ohm Stable 4-Channel Amplifier
RMS Power Rating:
4 ohms: 50 watts x 4 channel
2 ohms: 70 watts x 4 channel
1 ohm: ------------N/A------------
Bridged, 4 ohms: 130 watts x 2 channel
Total power output: 600 watts
Pulse Width Modulated MOSFET power supply
LED power (green) and protect (red) indicators
Soft start turn-on
4/3/2 or channel operation
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity: .2V - 8V
Frequency Response: 5 - 50000 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 95dB
Variable high-pass filter: 50 - 500 Hz
Variable low-pass filter: 50 - 500 Hz
Variable Bass Boost: 0 to +12 dB bass boost
Fuse Rating: 40A x 1
Dimensions: 9.4"W x 12.9"L x 2"H
Authorized Dealer
1-year Manufacturer's Warranty.
Alpine S-S57 5x7" Car Audio Coaxial 2-Way Speakers
FITS IN MOST COMMON APPLICATIONS
To meet the needs of the most common applications in speaker replacement today, we've introduced a new 5x7inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality in their vehicle. This component set, with its innovative technology, makes it a simple solution to getting Alpine sound in many of these vehicles on the road today.
INCREASED DRIVING POWER AND CONTROL
The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.
General Features:
5"x7" S-Type Series TYPE Car Speakers/Component System
Power Handling:
Peak: 460 watts per pair / 230 watts each
RMS: 150 watts per pair / 75 watts each
Carbon fiber reinforced plastic cone
Patented HAMR surround
1.1" Silk dome tweeter
CTA-2031 compliant speakers
30MM Voice Coil
Top-mount Depth: 2-11/32"
Cutout Dimensions: 4-15/16" x 7-3/16"
4 ohms impedance
Frequency Response: 73 - 22000 Hz
Sensitivity: 88dB
Authorized Dealer
1-year Manufacturer's Warranty
What's in the S-S57 package:
Two 2-way speakers
2 Adapter rings
Two 12" Lengths of speaker wire
Eight 1-1/4" Screws
Eight M4x6mm Machine screws
8 Speed clips
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
S-S57 owner's manual
⚠️Warning:Cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine BBX-F1200 Amplifier with Alpine S-S65C Component, S-S69 6X9" Coax Speakers and Wiring Kit
$395.95
$750.00
Alpine BBX-F1200 Amplifier with Alpine S-S65C Component, S-S69 6X9" Coax Speakers, and Wiring Kit
This bundle includes:
Alpine BBX-F1200 4-Channel Amplifier
8 Gauge Wiring Kit
Alpine S-Series S-S65C 6.5" Component Speakers
Alpine S-S69 S-Series 6x9-inch Coaxial 2-Way Speakers.
Absolute TW-600 600 Watts MAX High-Efficiency Dome Tweeter with Built-In Crossover (Pair)
Absolute USA BT1700 General Use 0.18mm x 3/4-Inch x 20Yd Electrical Tape (Black)
Absolute Universal 360 Degree Rotation and Swivel Mobile Bracket Holder
Alpine BBX-F1200 Amplifier 4 channel power amplifier 4-channel 600 watts This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget. Performance with Bass EQ, you can maximize the performance of your system and get even more powerful bass.
General Features:
Alpine BBX-F1200 4-Channel Amplifier
Amplifier Type: Class-A/B
Channel Design: 4/3/2 Channel
Total Max Power: 600W
Per Channel into 4ohms (1%THD+N): 4 x 50W
Per Channel into 2ohms (1%THD+N): 4 x 70W
Bridged into 4ohms (1%THD+N): 2 x 130W
Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB)
Footprint: 330 mm x 52 mm x 240 mm
Alpine S-S65C S-Series 6.5-inch Component 2-Way Speakers (pair)
General Features:
CEA-2031
Speaker rating: 80W RMS power handling
Speaker rating: 240W peak power handling
nominal impedance 4
Frequency response: 70Hz - 22kHz
6-1/2" 2-way component speakers
carbon-fiber-reinforced plastic woofer cone with specialized rubber surround
3/4" silk dome tweeter
sensitivity: 88 dB
mounting diameter: 5 1/16"
mounting depth: 2-5/16"
grills not included
warranty: 1 year
Alpine S-S69 S-Series 6x9-inch Coaxial 2-Way Speakers (pair)
General Features:
CEA-2031
Speaker rating: 85W RMS power handling
Speaker rating: 260W peak power handling
nominal impedance 4
6"x9" 2-way speakers
6"x9" carbon-fiber-reinforced plastic woofer cone with specialized rubber surround
3/4" silk dome tweeter with inline crossover
frequency response: 65-22,000 Hz
sensitivity: 90 dB
woofer top-mount depth: 2-15/16"
grills not included
Absolute TW-600 600 Watts MAX High-Efficiency Dome Tweeter with Built-In Crossover (Pair) Absolute USA BT1700 General Use 0.18mm x 3/4-Inch x 20Yd Electrical Tape (Black) Absolute Universal 360 Degree Rotation and Swivel Mobile Bracket Holder
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.