Alpine Packages & Bundles (500)

Alpine S-S65C 6.5" Component speaker for Honda 6.5" Or 6.75" Speaker Adapter With Speaker Harness Our Speaker Adapter Package is used to replace your factory speakers with higher-quality aftermarket speakers. Speaker adapters will allow you to quickly and easily replace your current car speakers. The adapter kit will mount the speakers securely in your vehicle without the need for modification. The harness will allow you to connect to your vehicle without cutting your factory wiring while maintaining the proper polarity of the speakers. By using an adapter/harness kit you can easily reverse the installation should you decide to sell or trade your vehicle. You can then install your higher-quality speakers in a new vehicle.Interchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange SpeakerHarnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura: 2007-2012 RDX - Front And Rear Speaker Locations 2009-2013 TL - Front And Rear Speaker Locations 2009-2013 TSX - Front And Rear Speaker Locations Honda: 2008-2012 Accord - Front And Rear Speaker Locations 2012-2013 Crosstour - Front And Rear Speaker Locations 2010-2011 Accord Crosstour - Front And Rear Speaker Locations 2006-2013 Civic - Front And Rear Speaker Locations 2012-2013 CR-V - Front And Rear Speaker Locations 2011-2013 CR-Z - Front And Rear Speaker Locations 2010-2013 Insight - Front And Rear Speaker Locations 2011-2013 Odyssey - Front And Rear Speaker Locations Alpine S-S65C 240W 6.5" Component Type-S 2 way speaker set w/ Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features: 6-1/2" Type-S Series Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each RMS Power Handling: 160 watts per pair / 80 watts each (CEA-2031 Certified) Tuned poly-mica cone woofer Butyl rubber surround for natural response and stability 1" Wide-Range Silk dome tweeter Optimized air-flow design Progressive Aramid Fiber Spider with optimized shape for deep bass and linearity HD Polymer frame FEA optimized motor structure OEM mounting adapters included Swivel-mount tweeter 4 ohms impedance Square-wire short voice coil New cone design allows for faster energy transfer & clarity Aramid reinforced TIL bobbin holds voice coil wire very rigid High-grade network components Neodymium tweeter magnet structure Low distortion strontium woofer magnet Speaker grilles KTE-S610G optional and sold separately Top-mount depth: 2-1/4" What is in the S-S65C package: 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters (each has a 29" length of wire attached) 2 Flush mount housings (with tweeters installed) 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers (each has quick slides on both ends) 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box S-S65C owner's manual Honda Speaker Adapter Kit Honda/Acura 6 1/2"-6 3/4" Speaker Adapters. For Select Acura and Honda models. Installs 6 1/2" or 6 3/4" Speakers. Dimension: 17"Lx 10"Wx 2"H. Weight: 0.3 Lbs. Speaker Connector Harnesses Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's factory harness without the need to cut or splice the factory wires. Features a high impact, OEM quality ABS plastic molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance. The precision hand assembled terminals are pressure-inserted into the plug making it virtually impossible to pull a wire out. ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

2 Alpine S-S65C 240W 6.5" Component Type-S 2 way speaker set w/ Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features: 6-1/2" Type-S Series Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each RMS Power Handling: 160 watts per pair / 80 watts each (CEA-2031 Certified) Tuned poly-mica cone woofer Butyl rubber surround for natural response and stability 1" Wide-Range Silk dome tweeter Optimized air-flow design Progressive Aramid Fiber Spider with optimized shape for deep bass and linearity HD Polymer frame FEA optimized motor structure OEM mounting adapters included Swivel-mount tweeter 4 ohms impedance Square-wire short voice coil New cone design allows for faster energy transfer & clarity Aramid reinforced TIL bobbin holds voice coil wire very rigid High-grade network components Neodymium tweeter magnet structure Low distortion strontium woofer magnet Speaker grilles KTE-S610G optional and sold separately Top-mount depth: 2-1/4" What is in the S-S65C package: 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters (each has a 29" length of wire attached) 2 Flush mount housings (with tweeters installed) 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers (each has quick slides on both ends) 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box S-S65C owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine S-S65C 6.5" Component speaker for Honda 6.5" Or 6.75" Speaker Adapter With Speaker HarnessInterchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange SpeakerHarnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura: 2007-2012 RDX - Front And Rear Speaker Locations 2009-2013 TL - Front And Rear Speaker Locations 2009-2013 TSX - Front And Rear Speaker Locations Honda: 2008-2012 Accord - Front And Rear Speaker Locations 2012-2013 Crosstour - Front And Rear Speaker Locations 2010-2011 Accord Crosstour - Front And Rear Speaker Locations 2006-2013 Civic - Front And Rear Speaker Locations 2012-2013 CR-V - Front And Rear Speaker Locations 2011-2013 CR-Z - Front And Rear Speaker Locations 2010-2013 Insight - Front And Rear Speaker Locations 2011-2013 Odyssey - Front And Rear Speaker Locations Alpine S-S65C 480W Peak (160W RMS) 6.5" Component Type  S-Series  2-way Component Speaker set with 1" Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features: 6-1/2" S Series 2-way Component System Car Speakers Power Handling: Polypropylene-Mica cone material Rubber speaker surround 1" Silk Dome Tweeters H.A.M.R. (High Amplitude Multi-Roll) surround First Carbon Fiber Reinforced Plastic (CFRP) 1.38" Voice coil magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Speaker grilles are sold separately Authorized Internet Dealer 1-year Manufacture Electronix Warranty What is in the S-S65C package: S-S65C owner's manual 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box Honda Speaker Adapter Kit Honda/Acura 6 1/2"-6 3/4" Speaker Adapters. For Select Acura and Honda models. Installs 6 1/2" or 6 3/4" Speakers. Dimension: 17"Lx 10"Wx 2"H. Weight: 0.3 Lbs. Speaker Connector Harnesses Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's factory harness without the need to cut or splice the factory wires. Features a high impact, OEM quality ABS plastic molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance. The precision hand-assembled terminals are pressure-inserted into the plug making it virtually impossible to pull a wire out. ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Pair Alpine X-S65C 720W Max (240W RMS) 6.5" X-Series 2-Way Component Car Speakers If you've been an Alpine devotee from car to car, their X-Series speakers are your opportunity to take the leap to premium sound. Designed with a laser focus on superior imaging, this X-S65C 6-1/2" component speaker system will bring out the very best in your audio system. And an all-new magnet design in a cast aluminum frame allows these speakers to have a low profile, so they can fit in a wide array of vehicles. All about the build Alpine uses a powerful magnet and a super-efficient motor structure to make the 6-1/2" woofer really strong in the lower frequencies. The woofer cone itself uses a specialized fiber for extreme rigidity while Alpine's proprietary High Amplitude Multi-Roll surround ensures durability in the face of extreme temperatures. Serious power handling The separate 1" carbon graphite dome tweeter handles the high frequencies with satisfying accuracy, and its extended frequency response lends a sense of realism and atmosphere unmatched by lesser tweeters. Driven by an aftermarket amplifier, you'll really have a soaring system, thanks to power handling up to a whopping 120 watts RMS. General Features: 6.5 X-Type 2-Way Component System Power Handling: Max: 720 W per set/ 360 W per side RMS: 240 W per set/ 120 W per side Recommended power range: 10 - 120W RMS Hi-Res Audio compatible Nano-fiber woofer cone H.A.M.R. surround 1" carbon graphite tweeter Adjustable tweeter attenuation: 0dB, +3dB, -3dB Adjustable tweeter phase: Normal or reverse A-Pole type neodymium magnet Top-mount depth: 2-5/16" Cutout Dimensions: 5-13/32" 4 ohms impedance Frequency Response: 55 - 50,000 Hz Sensitivity: 89 dB Authorized Internet Dealer What is in the X-S65C package: 2 Woofers + 2 Woofer grilles 2 Grille badges 2 Tweeters (each has a 26" length of wire attached) 2 Tweeter grilles (installed) 2 Surface mount housings (with tweeters installed) Two tweeter crossovers (each has attached 32" input and 14" output wires) 2 Rectangular adhesive-backed pads (crossover) 2 Circular adhesive-backed discs (tweeter) Eight 1-1/8" Screws + Eight 5/8" Screws 8 Speed-clips + 4 Speed nuts Four 5" Zip ties Warranty information Important Notice Online product registration information Templates and specs on the box X-S65C owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Pair Alpine X-S65C 720W Max (240W RMS) 6.5" X-Series 2-Way Component Car Speakers If you've been an Alpine devotee from car to car, their X-Series speakers are your opportunity to take the leap to premium sound. Designed with a laser focus on superior imaging, this X-S65C 6-1/2" component speaker system will bring out the very best in your audio system. And an all-new magnet design in a cast aluminum frame allows these speakers to have a low profile, so they can fit in a wide array of vehicles. All about the build Alpine uses a powerful magnet and a super-efficient motor structure to make the 6-1/2" woofer really strong in the lower frequencies. The woofer cone itself uses a specialized fiber for extreme rigidity while Alpine's proprietary High Amplitude Multi-Roll surround ensures durability in the face of extreme temperatures. Serious power handling The separate 1" carbon graphite dome tweeter handles the high frequencies with satisfying accuracy, and its extended frequency response lends a sense of realism and atmosphere unmatched by lesser tweeters. Driven by an aftermarket amplifier, you'll really have a soaring system, thanks to power handling up to a whopping 120 watts RMS. General Features: 6.5 X-Type 2-Way Component System Power Handling: Max: 720 W per set/ 360 W per side RMS: 240 W per set/ 120 W per side Recommended power range: 10 - 120W RMS Hi-Res Audio compatible Nano-fiber woofer cone H.A.M.R. surround 1" carbon graphite tweeter Adjustable tweeter attenuation: 0dB, +3dB, -3dB Adjustable tweeter phase: Normal or reverse A-Pole type neodymium magnet Top-mount depth: 2-5/16" Cutout Dimensions: 5-13/32" 4 ohms impedance Frequency Response: 55 - 50,000 Hz Sensitivity: 89 dB Authorized Internet Dealer What is in the X-S65C package: 2 Woofers + 2 Woofer grilles 2 Grille badges 2 Tweeters (each has a 26" length of wire attached) 2 Tweeter grilles (installed) 2 Surface mount housings (with tweeters installed) Two tweeter crossovers (each has attached 32" input and 14" output wires) 2 Rectangular adhesive-backed pads (crossover) 2 Circular adhesive-backed discs (tweeter) Eight 1-1/8" Screws + Eight 5/8" Screws 8 Speed-clips + 4 Speed nuts Four 5" Zip ties Warranty information Important Notice Online product registration information Templates and specs on the box X-S65C owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

1998-2013 Harley Davidson FLHT FLHTC Alpine S-S65 Factory Speaker Replacement & Metra 82-9601 Speaker Adapter Package Includes: ALPINE S-S65 240 Watt 6.5" Coaxial 2-Way Car Audio Speakers. Metra 82-9601 Harley Davidson Touring 6.5" to 6.75" Speaker Adapter Plate.  Alpine S-S65 480W Max (160W RMS) 6.5" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 6.5-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6.5" S Series 2-way Coaxial Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each RMS Power Handling: 160 watts per pair / 80 watts each Carbon Fiber Reinforced Plastic cone material High Roll Foam speaker surround 1" Silk Dome Tweeters Neodymium magnet motor structure Top-mount Depth: 2.28" Cutout Dimensions: 5" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Grilles are sold separately Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S-S65 Package: S-S65 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws 8 Speed clips Warranty information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

1998-2013 Harley Davidson FLHT FLHTC Alpine S-S65 Factory Speaker Replacement & Absolute K9601 or Metra 82-9601 Speaker Adapter Package Includes: ALPINE S-S65 240 Watt 6.5" Coaxial 2-Way Car Audio Speakers. Absolute K9601 or Metra 82-9601 Harley Davidson Touring 6.5" to 6.75" Speaker Adapter Plate.  Alpine S-S65 480W Max (160W RMS) 6.5" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 6.5-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6.5" S Series 2-way Coaxial Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each RMS Power Handling: 160 watts per pair / 80 watts each Carbon Fiber Reinforced Plastic cone material High Roll Foam speaker surround 1" Silk Dome Tweeters Neodymium magnet motor structure Top-mount Depth: 2.28" Cutout Dimensions: 5" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Grilles are sold separately Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S-S65 Package: S-S65 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws 8 Speed clips Warranty information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine iLX-W670 7" Shallow-Chassis Multimedia Receiver for Jeep 97-02 Dash Kit, Wiring Harness Jeep 97-02 Dash Kit, Wiring Harness, and Antenna Adapter with Alpine ILX-W670 7" Shallow-Chassis Multimedia Receiver - This bundle includes an Alpine ILX-W670 Digital Multimedia Receiver with CarPlay and Android Auto Compatibility, a Metra 70-1817 Wiring Harness Compatible with 1984-2005 Chrysler-Plymouth-Dodge-Jeep, a Metra 95-6549 Dash Kit Compatible with 1997-2002 Jeep Wrangler, a pry kit, and a Creative Audio cozy.Alpine ILX-W670 7 Inch Mechless Ultra-shallow AV System with Apple Carplay, Android Auto The new swipe control interface is designed for easy use so that you can keep your eyes on the road. A two-finger swipe motion moving up, down, left, or right will control volume up or down and track skip forward or back. The two-finger swipe can be done anywhere on the touch screen, so you don’t need to swipe at a specific location. The iLX-W670 “Works with Apple CarPlay” lets iPhone users make and receive calls, access text messages, play music, and get directions in a way that allows them to stay focused on the road. Apple CarPlay is accessed through the capacitive touch screen or the mic button to activate Siri's voice control and is compatible with iPhone 5 and later (iPhone must be connected via Apple lightning cable). The iLX-W670 includes Android Auto and works with the Google Assistant (requires both a USB cable and Bluetooth® connection; requires an Android™ phone running 5.0 [Lollipop] or higher and the Android Auto app). To access the Google Assistant on Android Auto, say "OK Google" or select the mic button. Google Assistant in Android Auto allows users to play their favorite music, get driving directions to their destination, interact with smart home devices, and reply to text messages – hands-free. General Features: Power Handling: Peak: 50 watts x 4 channels RMS: 16 watts x 4 channels 7-inch anti-glare capacitive touchscreen NEW two-finger swipe user interface Works with Apple CarPlay® Works with Android Auto™ and the Google Assistant Works with Pandora® Music for iPhone® and Android™ phones AM/FM tuner with 24FM/12 AM presets The amplifier measures just 7” W x 3.5” H x 1.25” D and fits in the open space behind the iLX-W650 using the included bracket, creating the PowerStack design. Authorized Dealer 1-year Manufacturer's Warranty Navigation Features: Use with Apple CarPlay or Android Auto Playback and Audio Features: Mechless Digital Media Receiver: No CD mechanism means you have less to carry. Stream your music digitally! FLAC/MP3/WMA/AAC/HE-AAC music playback via USB 9-band parametric equalizer with selectable tone curves Rear USB Input CEA-2006 compliant amplifier Bluetooth Features: Built-in Bluetooth technology for hands-free talking and audio streaming Bluetooth Profiles Supported: HFP: Hands-Free Profile allows a hands-free car kit to connect to a compatible mobile phone PBAP: Phone Book Access Profile allows the car stereo to display the name of the incoming caller, as well as access the contact list of the mobile phone directly from the car stereo A2DP: Advanced Audio Distribution Profile allows high-quality audio to be streamed from an audio device to the car stereo AVRCP: Audio/Video Remote Control Profile supports basic remote control functions (play, pause, etc.) via Bluetooth Works with most Bluetooth-enabled cell phones Expandability Options: Combine with the Alpine KTA-450 Power Pack Amplifier (sold separately) for a PowerStack installation. The combined depth of the Alpine ILX-W650, KTA-450, and mounting brackets is still less than the depth of a standard 2-DIN chassis Steering Wheel Control Ready: PAC ControlPRO or the Axxess ASWC-1 is required and sold separately Three 4-volt pre-outs allow aftermarket speakers, subwoofers, additional amplifiers, and sound processors to be added Two camera inputs allow for the addition of multiple cameras, including a rear-view camera (sold separately). SiriusXM-Ready™ (SXV300 Connect Vehicle Tuner Kit and subscription required, sold separately) What is in the iLX-W670 Package: iLX-W650 owner's manual Digital media receiver Wiring harness Preout/Camera harness 42" USB extension cable Microphone Bracket 4 ISO-screws Quick Reference Guide Registration Card Metra 70-1817 Wiring Harness Compatible with 1984-2005 Chrysler-Plymouth-Dodge-JeepGeneral Features: Plugs into car harness at radio Provides Power 4 Speaker connection Metra 95-6549 Dash Kit Compatible with 1997-2002 Jeep WranglerGeneral Features: ISO DDIN radio provision Complete the center dash panel for a factory look ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

ALPINE PSS-SX01-PWR 4 6.5" Wakeboard Tower Speakers + Amplifier KTA-30FW+Bluetooth For ATV/UTV/RZR This 600-watt sound system combines the premium sound you've expected from Alpine and a unique design that will complement the look of your Side-by-Side or UTV. NEXT LEVEL SOUNDGet everything you need to take your side-by-side system to the next level with the PSS-SXS01-PWR Power Package Upgrade. This upgrade includes Alpine’s PSS-SX01 and SPV-65-SXS for the ultimate sound system upgrade. MUSIC ON YOUR ADVENTURESStream music directly from your smartphone without a radio or head unit source with the included Bluetooth® Adaptor. The module allows for quick and easy pairing to your smartphone so you can listen to your music during your drive. General Features: bundle includes a 4-channel amplifier, controller, and four 6-1/2" cage-mount speaker pods includes clamp-style bar mounts and water-resistant wiring harness fits in a variety of Polaris, Honda, Kawasaki, Can-Am, and Yamaha models marine-grade construction for weather resistance Bluetooth enabled with controller included Alpine SPV-65-SXS 6-1/2" speakers (4) grille-mounted 1" Teteron dome tweeters IP55 weather-resistance rating power handling: 90 watts RMS (225 peaks) frequency response: 50-22,000 Hz Alpine KTA-30FW C marine amplifier 4-channel Class D amp designed for off-road use 75 watts RMS per channel (150 watts peak) speaker- and preamp-level inputs high- and low-pass crossovers (variable 50-400 Hz, 12 dB per octave) IP66 weather-resistance rating matte black finish warranty: 1 year What's in the PSS-SX01-PWR package:This package contains four individually boxed items along with parts in the main box:Main Box: 2 Front logo badges 2 Rear logo badges Installation instructions Warranty information Product Registration Alpine Technical Support information KTA-30FW Amplifier: 4-Channel amplifier 14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on the other end) 4 Self-tapping screws (Length 3/4") Connection sheet Limited Warranty sheet Thank you letter SPV-65-SXS Speaker Pods (x2): 2 Speaker pods w/integrated mounting clamps and rubber bushings Two 8" Water-proof speaker connectors (threaded connector on one end / bare wire on the other end) KCX-BT100 Bluetooth Adapter: Bluetooth adapter w/ 3M adhesive backing and attached 12" wires + RCA cables (inline 2A mini-ATC fuse) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Alpine KTA-200M Mono Power Pack Amp with Alpine W10S4 10" Subwoofer This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier and an Alpine W10S4 10-inch Single 4 Ohm Subwoofer. Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier The KTA-200M fits in the open space behind Alpine’s iLX-W670 or iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W670 iLX-W650 (1.9-inch D) occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier in a compact size, easy installation, and overall power. While designed to “stack” behind the iLX-W670 iLX-W650, or similar 2-DIN radio, both amplifiers can also be used as standalone solutions in vehicles that don’t have space for a traditional amplifier. The KTA-200M produces 400 watts with Alpine’s DPP technology. During powerful or “dynamic” passages of music, DPP will adapt to the music's needs by adjusting the amplifier's gain and delivering bursts of power that match the peak demands of the music. Alongside that is the new voltage-adapting input circuit to maintain the maximum source signal level without clipping. General Features: Power Stack capable with the Alpine iLX-W670 iLX-W650 compact mono subwoofer amplifier Alpine’s Class D Amplifier Circuit with DPP Dynamic Peak Power (DPP) technology adds a burst of power when needed CTA-2006 compliant 100W x 1 RMS @ 4Ω, Power Outputs 200W x 1 RMS @ 2Ω, Power Outputs 400W x 1 DPP @ 4Ω, Power Outputs Signal to Noise Ratio 85dB (ref. 1W into 4Ω) ≤0.1% THD+N (ref. 10W into 2Ω) Single-side 22-pin connector selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave) preamp and speaker-level inputs RCA inputs (selectable, Low range=0.2-4V) Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable) wiring, hardware, and fuse not included with the amplifier Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver Authorized Dealer 1-year Warranty What is in the KTA-200M package: KTA-200M Owner's Manual Mono amplifier 12" Input/Output/Power harness 1 Head unit (iLX-W670 iLX-W650) mounting bracket 2 Universal mounting brackets Four M5x6mm Allen head machine screws (3mm) Two M2.6x8mm Machine screws Four 3/8" Screws Four 8" Zip Ties Warranty information Online product registration information FCC Compliance Statement Alpine W10S4 10" Bass Subwoofer 750W Max (250W RMS) 10" BassLine Series Single 4-ohm Car Subwoofer Legendary Alpine quality at an affordable price Car audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that will keep the bank intact. Surround and wattage match made in heaven The 250 watts of continuous power that the W10S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point. General Features: 10" Single 4-ohm BassLine (Bass) Series Subwoofer Power Handling: Peak: 750 watts RMS: 250 watts Recommended power range: 50W - 250W RMS Polypropylene-Mica cone High-excursion poly-foam surround Progressive Wavelet Ribs (P.W.R.) cone design An optional Alpine KTE-10PG subwoofer grill is available and is a wonderful complement to the trim ring with the Alpine logo High-strength custom steel frame 8AWG push terminals 2" voice coil 52oz. magnet Top-mount depth: 5-1/16" Cutout diameter: 9" Frequency Response: 24 - 200Hz Sensitivity: 86.6dB Resonance Frequency (Fs): 32 Authorized Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine W10S4 10" Bass Subwoofer 750W Max (250W RMS) 10" BassLine Series Single 4 ohm Car Subwoofer Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.The surround and wattage match made in heaven.The 250 watts of continuous power that the W10S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features: 10" Single 4-ohm BassLine (Bass) Series Subwoofer Power Handling: Peak: 750 watts RMS: 250 watts Recommended power range: 50W - 250W RMS Polypropylene-Mica cone High-excursion poly-foam surround Progressive Wavelet Ribs (P.W.R.) cone design An optional Alpine KTE-10PG subwoofer grill is available and is a wonderful complement to the trim ring with the Alpine logo High-strength custom steel frame 8AWG push terminals 2" voice coil 52oz. magnet Top-mount depth: 5-1/16" Cutout diameter: 9" Frequency Response: 24 - 200Hz Sensitivity: 86.6dB Resonance Frequency (Fs): 32 Authorized Dealer 1-year Manufacturer's Warranty What's in the  W10S4 package: W10S4 owner's manual One 10" Subwoofer per box Adhesive-backed foam gasket Application Guide Online product registration information Warranty Information Important Notice! ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine W10S4 10" Bass Subwoofer 750W Max (250W RMS) 10" BassLine Series Single 4 ohm Car Subwoofer Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.The surround and wattage match made in heaven.The 250 watts of continuous power that the W10S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features: 10" Single 4-ohm BassLine (Bass) Series Subwoofer Power Handling: Peak: 750 watts RMS: 250 watts Recommended power range: 50W - 250W RMS Polypropylene-Mica cone High-excursion poly-foam surround Progressive Wavelet Ribs (P.W.R.) cone design An optional Alpine KTE-10PG subwoofer grill is available and is a wonderful complement to the trim ring with the Alpine logo High-strength custom steel frame 8AWG push terminals 2" voice coil 52oz. magnet Top-mount depth: 5-1/16" Cutout diameter: 9" Frequency Response: 24 - 200Hz Sensitivity: 86.6dB Resonance Frequency (Fs): 32 Authorized Dealer 1-year Manufacturer's Warranty What's in the  W10S4 package: W10S4 owner's manual One 10" Subwoofer per box Adhesive-backed foam gasket Application Guide Online product registration information Warranty Information Important Notice! ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.