Alpine Jeep Wrangler (28)

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice sheet Installation instructions Specifications on box ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine PSS-22WRA Jeep Wrangler JK Unlimited Weather Resistant Upgrade SPV-65X-WRA x 2, KTA-30F-WRA, KTA-30M-WRA, SBV-10-WRA Good times in your Wrangler Unlimited are about to get better. Alpine's Restyle PSS-22WRA speaker system takes the guesswork out of installation with nine direct-fit speakers and power sources perfectly suited for your Jeep Wrangler JK Unlimited (not compatible with premium sound systems). Alpine has also designed this weather-proof system to endure the environmental harshness of life in your Jeep, even when the top is off. Get ready to rock the great outdoors.The soundAlpine supplies everything you need to revitalize the sound in your Wrangler. You'll get two 6-1/2" component systems with 1" dome tweeters for the front and soundbar locations in your Jeep. Alpine lets you convert these components to a coaxial design if called for in your JK Unlimited. The included weather-resistant Tough Pack 4-channel amp ups your power for awesome clarity at all volumes — a must for top-down drivers. Alpine also gives you a 10" enclosed under-seat subwoofer and a Tough Pack mono amp for some whoppin' bass. The fitAlpine designed the Restyle line for drivers who want to improve their sound but want to maintain the factory look of their vehicle. The PSS-22WRA sound system upholds this approach by including tweeter mounting gear suitable for a variety of locations. The woofers fit directly into your factory locations and in the case of the two amps, all wiring is included, complete with factory compatible plugs. Once the PSS-22WRA system goes in, you won't even know it's there... until you crank up the volume.READ LESSProduct highlights:compatible with select 2011-18 Jeep Wrangler JK Unlimited models (not compatible with premium sound systems)package includes:two sets of SPV-65X-WRA 6-1/2" component speakersweather-resistant Tough Pack KTA-30F-WRA 4-channel amplifierweather-resistant Tough Pack KTA-30M-WRA mono amplifier with the remote bass knobSBV-10-WRA 10" enclosed submounting gear, wiring, and connectorsincluded SPV-65X-WRA speakers can be configured for component or coaxial use General Features: Alpine PSS-22WRA Audio Restyle for Jeep Wrangler Unlimited JK Includes speakers, tweeters, a powered subwoofer, and two amplifiers Fully Waterproof Plug-and-Play Package Specifically designed for 2007-2018 four-door Jeep Wrangler Unlimited Vehicles Authorized Internet Dealer compatible with select 2011-18 Jeep Wrangler JK Unlimited models (not compatible with premium sound systems) package includes: two sets of SPV-65X-WRA 6-1/2" component speakers weather-resistant Tough Pack KTA-30F-WRA 4-channel amplifier weather-resistant Tough Pack KTA-30M-WRA mono amplifier with the remote bass knob SBV-10-WRA 10" enclosed sub mounting gear, wiring, and connectors included SPV-65X-WRA speakers can be configured for component or coaxial use What's in the box: SPV-65X-WRA x 2, KTA-30F-WRA, KTA-30M-WRA, SBV-10-WRA ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine SBV-10-WRA 10" Sub for 2007-2018 Jeep Wrangler with S-A60M Amp, Absolute KIT4 4 Gauge Amp Wiring kit Alpine designed their SBV-10-WRA sealed sub enclosure to fit under the passenger seat of 2007-17 Jeep Wrangler JK models (also fits the early 2018 JK body style), giving you the bass you need without taking up cargo space. Alpine loads the SBV-10-WRA with a rugged 10" subwoofer, which handles up to 350 watts RMS to deliver powerful bass. The sub's 2-ohm impedance ensures maximum output from your mono amplifier. Alpine SBV-10-WRA Pre-Loaded 10-Inch Subwoofer for 2007-2018 Jeep Wrangler JKU When you have a Wrangler, you don’t have extra space to spare. Alpine engineered the SBV-10-WRA to fit conveniently under the front passenger seat, making efficient use of space. The SBV-10-WRA is a custom-shaped enclosure that fits snugly under the seat frame, so no mounting hardware is required. (NOTE: designed for fitment in Jeeps with the factory carpet. Fitment is not guaranteed with aftermarket or removed carpet) Enjoy impactful bass with your Wrangler’s top on or off. The SBV-10-WRA loads the lower frequency sound into the passenger’s footwell to deliver quality sound and maximized bass extension at all times, so your music continues even when the asphalt ends.General Features: 10" High-Performance Transducer Sealed Subwoofer Enclosure Power Handling: Peak: 1000W Total RMS: 300W Total Final Impedance: 2 ohms Preloaded with single 10" Series Subwoofers Sealed Enclosure with (finish type) Enclosure Dimensions: 16-1/4" L x 15-3/4" W x 8-3/8" H Subwoofer Features: Water Resistance: IP66 Rating Frequency Response: 35-200Hz Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine S-A60M S-Series Monoblock Class-D Amplifier 600W RMSThe Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers.S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in terms of performance value. General Features: Alpine S-Series Mono Power Amplifier - S-A60M RMS Power Output: 400W x 1 @ 4 Ohms (14.4V < 1% THD+N) 600W x 1 @ 2 Ohms (14.4V < 1% THD+N) S/N ratio: >85dB (ref: 1W into 4 ohm), >105dB (ref: rated power into 4 ohms) Remote bass knob compatible (requires RUX-KNOB.2, sold separately) CTA-2006 compliant THD+N ≤ 0.03% (ref 1W info 4 ohm) Frequency Response: 10HZ-400Hz (+/- 3 dB) Damping Factor: > 1000 variable low-pass filter (50-400 Hz, 24 dB/octave) variable bass boost (0-12 dB at 50 Hz) Speaker-level inputs (Speaker Wire to RCA Adapter Required) Preamp Inputs Improved heat sink and protection circuit design that eliminates thermal shut-down for dependable music playback Remote Sensing automatic turn-on when using speaker-level inputs Approximate Weight: 11 lbs Fuse Rating: fuse rating: 30A x 2 Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select from our website when purchased together with this amplifier. Dimensions: 8” W x 8” H x 2.25” D Authorized Dealer 1-year Manufacturer's Warranty What's in the box: Mono subwoofer amplifier Two 30-amp ATO fuses (installed) Four 3/4" Screws 2mm Allen wrench Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Alpine S-A60M owner's manual Absolute KIT4 Complete PRO Marine 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with Red Accent Color Scheme Installing a car amplifier is already enough of a job without worrying about where to find the correct wire and installation accessories. What you might not know is that some companies are using gimmicks, and you could end up getting ripped off! Today, I recommend KIT4 for all DIY and installers. This wiring kit has an easy-to-install AGU fuse holder and some perfect wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels and works great, and it is much better than the typical 18 AWG wire most kits would consist of. General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of red 4 AWG high current power cable Three ft. of black 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire Six ft. of split loom tubing 1 Gold-plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice sheet Installation instructions Specifications on box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.