Alpine 6.5" Component Car Speakers (58)

Alpine Status HDZ-653S 600W Hi-Res 6-1/2" (16.5cm) 3-Way Component Speaker Set Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also highly flexible: all components can be purchased and used in a “stand-alone” configuration.Alpine Status offers a wide range of Hi-Res Audio-enabled speakers for the audiophile looking to build an ideal sound system. The HDZ-653 3-Way speaker set with a high-resolution bandwidth of 55Hz – 40kHz includes a 170mm door woofer, 96mm mid-range, and 70mm ring-radiator tweeter with a 25mm voice coil. They also include high-end speaker x-overs.All speaker cones are made from the same Carbon Composite material to create a unified timbre identity during playback. They get very close to the Alpine F#1 Status speaker's look and feel, using a similar construction, motor assembly, and identical build materials for the highest sound quality. General Features: 6-1/2" Alpine Status Hi-Res Series 3-way Component Speakers Car Speakers Peak Power Handling: 600 watts per set / 300 watts on each side RMS Power Handling: 200 watts per set / 100 watts on each side Carbon Composite cone material Double-Gathered Edge speaker surround 1" Dome Tweeters Slim fit design Hi-Res audio certified High-end X-Over networks Integrated Wave Guide on all speakers Aluminum die-cast baskets Backed carbon fiber cones CEA-2031 compliant: Yes Ferrite magnet motor structure Top-mount Depth: 2 3/4" Cutout Dimensions: 5 5/8" Impedance: 4 ohms Frequency Response: 55 - 40000 Hz Sensitivity: 88 dB Speaker grilles included Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the package HDZ-653S: HDZ-653S owner's manual Two woofers Two woofer grilles Two midrange Two midrange grilles Two tweeters Two threaded tweeter mounting rings Two crossovers Eight 1-1/8" M4 Screws Sixteen 1-1/8" M3 Screws  Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Pair Alpine SXE-1751S 6.5" 280 Watts 2-Way Component Speakers General Features: Rated Power: 45 Watts Peak Power: 280 Watts Nominal Impedance: 4 Ohm Frequency Response: 60Hz - 20,000 Hz Ferrite Woofer Neodym Tweeter Kapton Voice Coil Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the SXE-1751S package: 6.5" Speakers (2) Grilles (2, detached) Mounting screws (8) Mounting screws (8) Speaker connection cables (2) User manual SXE-1751S owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine S-S65C 480W Peak (160W RMS) 6.5" Component Type  S-Series  2-way Component Speaker set with 1" Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features: 6-1/2" S Series 2-way Component System Car Speakers Power Handling: Polypropylene-Mica cone material Rubber speaker surround 1" Silk Dome Tweeters H.A.M.R. (High Amplitude Multi-Roll) surround First Carbon Fiber Reinforced Plastic (CFRP) 1.38" Voice coil magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Speaker grilles are sold separately Authorized Internet Dealer 1-year Manufacture Electronix Warranty What is in the S-S65C package: S-S65C owner's manual 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-S65C 480W Peak (160W RMS) 6.5" Component Type  S-Series  2-way Component Speaker set with 1" Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features: 6-1/2" S Series 2-way Component System Car Speakers Power Handling: Polypropylene-Mica cone material Rubber speaker surround 1" Silk Dome Tweeters H.A.M.R. (High Amplitude Multi-Roll) surround First Carbon Fiber Reinforced Plastic (CFRP) 1.38" Voice coil magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Speaker grilles are sold separately Authorized Internet Dealer 1-year Manufacture Electronix Warranty What is in the S-S65C package: S-S65C owner's manual 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-S65C 240W 6.5" Component Type-S 2 way speaker set w/ Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features: 6-1/2" Type-S Series Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each RMS Power Handling: 160 watts per pair / 80 watts each (CEA-2031 Certified) Tuned poly-mica cone woofer Butyl rubber surround for natural response and stability 1" Wide-Range Silk dome tweeter Optimized air-flow design Progressive Aramid Fiber Spider with optimized shape for deep bass and linearity HD Polymer frame FEA optimized motor structure OEM mounting adapters included Swivel-mount tweeter 4 ohms impedance Square-wire short voice coil New cone design allows for faster energy transfer & clarity Aramid reinforced TIL bobbin holds voice coil wire very rigid High-grade network components Neodymium tweeter magnet structure Low distortion strontium woofer magnet Speaker grilles KTE-S610G optional and sold separately Top-mount depth: 2-1/4" What is in the S-S65C package: 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters (each has a 29" length of wire attached) 2 Flush mount housings (with tweeters installed) 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers (each has quick slides on both ends) 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box S-S65C owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Pair Alpine X-S65C 720W Max (240W RMS) 6.5" X-Series 2-Way Component Car Speakers If you've been an Alpine devotee from car to car, their X-Series speakers are your opportunity to take the leap to premium sound. Designed with a laser focus on superior imaging, this X-S65C 6-1/2" component speaker system will bring out the very best in your audio system. And an all-new magnet design in a cast aluminum frame allows these speakers to have a low profile, so they can fit in a wide array of vehicles. All about the build Alpine uses a powerful magnet and a super-efficient motor structure to make the 6-1/2" woofer really strong in the lower frequencies. The woofer cone itself uses a specialized fiber for extreme rigidity while Alpine's proprietary High Amplitude Multi-Roll surround ensures durability in the face of extreme temperatures. Serious power handling The separate 1" carbon graphite dome tweeter handles the high frequencies with satisfying accuracy, and its extended frequency response lends a sense of realism and atmosphere unmatched by lesser tweeters. Driven by an aftermarket amplifier, you'll really have a soaring system, thanks to power handling up to a whopping 120 watts RMS. General Features: 6.5 X-Type 2-Way Component System Power Handling: Max: 720 W per set/ 360 W per side RMS: 240 W per set/ 120 W per side Recommended power range: 10 - 120W RMS Hi-Res Audio compatible Nano-fiber woofer cone H.A.M.R. surround 1" carbon graphite tweeter Adjustable tweeter attenuation: 0dB, +3dB, -3dB Adjustable tweeter phase: Normal or reverse A-Pole type neodymium magnet Top-mount depth: 2-5/16" Cutout Dimensions: 5-13/32" 4 ohms impedance Frequency Response: 55 - 50,000 Hz Sensitivity: 89 dB Authorized Internet Dealer What is in the X-S65C package: 2 Woofers + 2 Woofer grilles 2 Grille badges 2 Tweeters (each has a 26" length of wire attached) 2 Tweeter grilles (installed) 2 Surface mount housings (with tweeters installed) Two tweeter crossovers (each has attached 32" input and 14" output wires) 2 Rectangular adhesive-backed pads (crossover) 2 Circular adhesive-backed discs (tweeter) Eight 1-1/8" Screws + Eight 5/8" Screws 8 Speed-clips + 4 Speed nuts Four 5" Zip ties Warranty information Important Notice Online product registration information Templates and specs on the box X-S65C owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Pair Alpine X-S65C 720W Max (240W RMS) 6.5" X-Series 2-Way Component Car Speakers If you've been an Alpine devotee from car to car, their X-Series speakers are your opportunity to take the leap to premium sound. Designed with a laser focus on superior imaging, this X-S65C 6-1/2" component speaker system will bring out the very best in your audio system. And an all-new magnet design in a cast aluminum frame allows these speakers to have a low profile, so they can fit in a wide array of vehicles. All about the build Alpine uses a powerful magnet and a super-efficient motor structure to make the 6-1/2" woofer really strong in the lower frequencies. The woofer cone itself uses a specialized fiber for extreme rigidity while Alpine's proprietary High Amplitude Multi-Roll surround ensures durability in the face of extreme temperatures. Serious power handling The separate 1" carbon graphite dome tweeter handles the high frequencies with satisfying accuracy, and its extended frequency response lends a sense of realism and atmosphere unmatched by lesser tweeters. Driven by an aftermarket amplifier, you'll really have a soaring system, thanks to power handling up to a whopping 120 watts RMS. General Features: 6.5 X-Type 2-Way Component System Power Handling: Max: 720 W per set/ 360 W per side RMS: 240 W per set/ 120 W per side Recommended power range: 10 - 120W RMS Hi-Res Audio compatible Nano-fiber woofer cone H.A.M.R. surround 1" carbon graphite tweeter Adjustable tweeter attenuation: 0dB, +3dB, -3dB Adjustable tweeter phase: Normal or reverse A-Pole type neodymium magnet Top-mount depth: 2-5/16" Cutout Dimensions: 5-13/32" 4 ohms impedance Frequency Response: 55 - 50,000 Hz Sensitivity: 89 dB Authorized Internet Dealer What is in the X-S65C package: 2 Woofers + 2 Woofer grilles 2 Grille badges 2 Tweeters (each has a 26" length of wire attached) 2 Tweeter grilles (installed) 2 Surface mount housings (with tweeters installed) Two tweeter crossovers (each has attached 32" input and 14" output wires) 2 Rectangular adhesive-backed pads (crossover) 2 Circular adhesive-backed discs (tweeter) Eight 1-1/8" Screws + Eight 5/8" Screws 8 Speed-clips + 4 Speed nuts Four 5" Zip ties Warranty information Important Notice Online product registration information Templates and specs on the box X-S65C owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

ALPINE SPV-65X-WRA 6.5" Coaxial + Absolute MPS65B Rollbar Speakers for 2007-2018 Jeep Wrangler JK Alpine SPV-65X-WRA Weather Resistant 6.5" Speakers for 2007-18 Jeep Wrangler JK + Pair of Absolute MPS65B 6.5" Black Wakeboard Tower Speakers With 200 Watts Each Speaker - Truly Marine Grade Withstands Salt Spray, Water, and Sunlight ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer Absolute MPS65BK Black Marine-Grade RV Titanium 6.5" 200W RMS Total Wake Tower POD Waterproof Enclosure Speaker (ONE PAIR) This pair of Titanium Marine-Grade 6.5" 400-Watts Black Wake Tower POD Speakers from Absolute USA is housed in a 100% waterproof enclosure. The speaker system is made of high-density ABS construction with UV coating. The steel-reinforced mounting bracket fits most towers. The speaker cone is polypropylene, and the tweeter is titanium. Terminals are quick-disconnect compression types. The RMS on this system is 200Watts, the frequency response is 40Hz–20kHz. Dimensions are 8.5"H x 8.5"W x 9"D. A braided stainless-steel safety cable and stainless-steel mounting hardware are included. General Feature: 6.5” 2-WAY MARINE POD SPEAKER SYSTEM High Fidelity Speaker System Full Marinized Against Salt & Fresh Water Conditions 100% Completely Waterproof and Rustproof Enclosure & Speaker System injection-molded polypropylene-mica composite cone High-Density ABS Construction with UV Coating Internally Braced Steel Reinforced Nylon Bracket Steel-Reinforced Mounting Bracket Fits Most Towers 1” Polypropylene Speaker Cone with Rubber Surround Adjustable Nylon Mounting Bracket Reinforced with Embedded Steel Completely Water / Rust Resistant Terminals Are Sealed with Rubber Gaskets Specially Tuned for PA Voice Over Polypropylene Mica Injected Cone with Santorini Surround High BL Magnet Motor Structure 1" titanium dome tweeter Heavy Duty Plastic Construction Quick Connect Speaker Terminals 100 Watts RMS Each / 200 Watts RMS Total Power Handling 200 Watts Max Each / 400 Watts Max Total Power Handling Frequency Response 40Hz-20KHz Impedance 4-Ohms Sensitivity 90dB @ 1w/1m Mounting Depth 9” dimensions: 7" x 9-1/2" 2.5" Mounting clamps 360-degree swivel mounts System Includes One Pair Wake Board Speakers Stainless Steel Mounting Brackets Integrated Grills Installation Hardware ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov