00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine S2-A36F S-Series Class-D 4-Channel Car Amplifier + RUX-H01 Halo Bass Knob
$319.90
$500.00
Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier + Alpine RUX-H01 Halo Bass Knob Remote Bass Level Control
The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.
General Features:
Hi-Res Audio Certified (Up to 40kHz)
Power Rating: 14.4V, < 0.3% THD +N
Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω
Bridged Power: 180W RMS x 2 @ 4Ω
4-Channel Amplifier
Alpine’s Class D Amplifier Circuit
Two-sided terminal layout
Built-in Selectable/ Adjustable Crossovers
Mid-Bass EQ Input for more power
Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)
Dimensions: 8.7” W x 2.25” H x 8.25” D
Weight: 4 lbs, 13 oz
S/N Ratio: >83dB
Frequency Response: 20Hz – 40kHz
Damping Factor: >100
Owner’s Manual
4 Self-tapping screws
Hexagon wrench
What is in the S2-A36F package:
S2-A36F owner's manual
4-Channel amplifier
2 End caps
Four 3/4" screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine S2-A36F S-Series Class-D 4-Channel Car Amplifier + RUX-KNOB.2 Remote Bass Level Control
$289.95
$400.00
Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier + Alpine RUX-KNOB.2 Remote Bass Level Control
The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.
General Features:
Hi-Res Audio Certified (Up to 40kHz)
Power Rating: 14.4V, < 0.3% THD +N
Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω
Bridged Power: 180W RMS x 2 @ 4Ω
4-Channel Amplifier
Alpine’s Class D Amplifier Circuit
Two-sided terminal layout
Built-in Selectable/ Adjustable Crossovers
Mid-Bass EQ Input for more power
Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)
Dimensions: 8.7” W x 2.25” H x 8.25” D
Weight: 4 lbs, 13 oz
S/N Ratio: >83dB
Frequency Response: 20Hz – 40kHz
Damping Factor: >100
Owner’s Manual
4 Self-tapping screws
Hexagon wrench
What is in the S2-A36F package:
S2-A36F owner's manual
4-Channel amplifier
2 End caps
Four 3/4" screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine S2-A60M S-Series Class D 600 W Mono Subwoofer Amplifier + 0 Gauge Amp Kit
$249.95
$400.00
Alpine S2-A60M Next Generation S-Series Hi Res Class D 600 W Mono Subwoofer Amplifier + Absolute KIT0 0 Gauge Amp Kit
Alpine's S-Series S2-A60M 600W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 600W at a 1ohm or 2ohm drive, this mono amp can drive even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications. Plus, its compact design makes it easy to install in any vehicle.
General Features:
Class D 2 ohms Stable Monoblock Amplifier
RMS Power Rating @ 4 ohms: 330 watts x 1 channel
RMS Power Rating @ 2 ohms: 600 watts x 1 channel
Pulse Width Modulated MOSFET power supply
LED Power/Protect Light
Optional remote bass level control available for purchase Alpine RUX-KNOB.2
Soft start turn-on
Improved heat sink and protection circuit design
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Frequency Response: 10 - 400 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 85 dB
Variable low-pass filter: 50 - 400 Hz
Variable Bass Boost: 0 - 12 dB
Fuse Rating: 30A x 2
Dimensions: 8-1/16" W x 9-3/16" L x 2-5/16" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the S2-A60M PACKAGE:
S2-A60M owner's manual
Mono subwoofer amplifier
2 End caps
Four 3/4" screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine S2-A60M S-Series Class D 600 W Mono Subwoofer Amplifier + 4 Gauge Amp Kit
$249.95
$400.00
Alpine S2-A60M Next Generation S-Series Hi Res Class D 600 W Mono Subwoofer Amplifier + Absolute KIT4 4 Gauge Amp Kit
Alpine's S-Series S2-A60M 600W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 600W at a 1ohm or 2ohm drive, this mono amp can drive even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications. Plus, its compact design makes it easy to install in any vehicle.
General Features:
Class D 2 ohms Stable Monoblock Amplifier
RMS Power Rating @ 4 ohms: 330 watts x 1 channel
RMS Power Rating @ 2 ohms: 600 watts x 1 channel
Pulse Width Modulated MOSFET power supply
LED Power/Protect Light
Optional remote bass level control available for purchase Alpine RUX-KNOB.2
Soft start turn-on
Improved heat sink and protection circuit design
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Frequency Response: 10 - 400 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 85 dB
Variable low-pass filter: 50 - 400 Hz
Variable Bass Boost: 0 - 12 dB
Fuse Rating: 30A x 2
Dimensions: 8-1/16" W x 9-3/16" L x 2-5/16" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the S2-A60M PACKAGE:
S2-A60M owner's manual
Mono subwoofer amplifier
2 End caps
Four 3/4" screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine S2-A60M S-Series Class D 600 W Mono Subwoofer Amplifier
$249.95
$400.00
Alpine S2-A60M Next Generation S-Series Hi Res Class D 600 W Mono Subwoofer Amplifier
Alpine's S-Series S2-A60M 600W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 600W at a 1ohm or 2ohm drive, this mono amp can drive even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications. Plus, its compact design makes it easy to install in any vehicle.
General Features:
Class D 2 ohms Stable Monoblock Amplifier
RMS Power Rating @ 4 ohms: 330 watts x 1 channel
RMS Power Rating @ 2 ohms: 600 watts x 1 channel
Pulse Width Modulated MOSFET power supply
LED Power/Protect Light
Optional remote bass level control available for purchase Alpine RUX-KNOB.2
Soft start turn-on
Improved heat sink and protection circuit design
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Frequency Response: 10 - 400 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 85 dB
Variable low-pass filter: 50 - 400 Hz
Variable Bass Boost: 0 - 12 dB
Fuse Rating: 30A x 2
Dimensions: 8-1/16" W x 9-3/16" L x 2-5/16" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the S2-A60M PACKAGE:
S2-A60M owner's manual
Mono subwoofer amplifier
2 End caps
Four 3/4" screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine S2-A36F S-Series Class-D 4-Channel Car Amplifier + 0 Gauge Amp Kit
$299.95
$400.00
Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier + Absolute KIT0 0 Gauge Amp Kit
The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.
General Features:
Hi-Res Audio Certified (Up to 40kHz)
Power Rating: 14.4V, < 0.3% THD +N
Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω
Bridged Power: 180W RMS x 2 @ 4Ω
4-Channel Amplifier
Alpine’s Class D Amplifier Circuit
Two-sided terminal layout
Built-in Selectable/ Adjustable Crossovers
Mid-Bass EQ Input for more power
Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)
Dimensions: 8.7” W x 2.25” H x 8.25” D
Weight: 4 lbs, 13 oz
S/N Ratio: >83dB
Frequency Response: 20Hz – 40kHz
Damping Factor: >100
Owner’s Manual
4 Self-tapping screws
Hexagon wrench
What is in the S2-A36F package:
S2-A36F owner's manual
4-Channel amplifier
2 End caps
Four 3/4" screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine S2-A36F S-Series Class-D 4-Channel Car Amplifier + 4 Gauge Amp Kit
$279.95
$400.00
Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier + Absolute KIT4 4 Gauge Amp Kit
The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.
General Features:
Hi-Res Audio Certified (Up to 40kHz)
Power Rating: 14.4V, < 0.3% THD +N
Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω
Bridged Power: 180W RMS x 2 @ 4Ω
4-Channel Amplifier
Alpine’s Class D Amplifier Circuit
Two-sided terminal layout
Built-in Selectable/ Adjustable Crossovers
Mid-Bass EQ Input for more power
Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)
Dimensions: 8.7” W x 2.25” H x 8.25” D
Weight: 4 lbs, 13 oz
S/N Ratio: >83dB
Frequency Response: 20Hz – 40kHz
Damping Factor: >100
Owner’s Manual
4 Self-tapping screws
Hexagon wrench
What is in the S2-A36F package:
S2-A36F owner's manual
4-Channel amplifier
2 End caps
Four 3/4" screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine S2-A36F S-Series Class-D 4-Channel Car Amplifier
$199.95
$400.00
Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier
The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.
General Features:
Hi-Res Audio Certified (Up to 40kHz)
Power Rating: 14.4V, < 0.3% THD +N
Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω
Bridged Power: 180W RMS x 2 @ 4Ω
4-Channel Amplifier
Alpine’s Class D Amplifier Circuit
Two-sided terminal layout
Built-in Selectable/ Adjustable Crossovers
Mid-Bass EQ Input for more power
Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)
Dimensions: 8.7” W x 2.25” H x 8.25” D
Weight: 4 lbs, 13 oz
S/N Ratio: >83dB
Frequency Response: 20Hz – 40kHz
Damping Factor: >100
Owner’s Manual
4 Self-tapping screws
Hexagon wrench
What is in the S2-A36F package:
S2-A36F owner's manual
4-Channel amplifier
2 End caps
Four 3/4" screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
R2-A150M 1500 W RMS High-Performance Class-D Mono Sub Amplifier
$599.95
$1,000.00
Alpine R-Series R2-A150M 1500 W RMS High-Performance Class-D Mono Sub Amplifier
The Alpine “R-Series” line of speakers, subwoofers, and amplifiers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience. They have a 15% reduced footprint compared to the previous models and are easier to install.If you like loud and clear music, our Alpine R-Series R2-A150M mono amplifier is for you. It cleanly reproduces the bass in your music so you can enjoy the enhanced realism you want, even when you're playing High-Res music. We built some of our top-of-the-line amplifier technology into this R2-Series amp, including high-efficiency transformers, premium low-noise custom capacitors, and low-distortion dual "Sierra" feedback/correction circuitry.The R2-A150M mono amplifier produces up to 1200 watts RMS @ 2 Ohms, making it a perfect match for the Alpine R-Series subwoofer line. Advanced Class-D amp technology makes this powerful amp small enough to fit almost any location. You can adjust the amp's low pass, bass boost, and subsonic filter to get the right bass tone. Plus, you can add the optional RUX-KNOB2 remote bass knob to control your bass from the dash.
General Features:
Mono subwoofer amplifier
1500W Mono Amplifier
RMS Power Output: 700W x 1 @ 4Ω
RMS Power Output: 1200W x 1 @ 2Ω
RMS Power Output: 1500W x 1 @ 1Ω
Class D Amplifier Circuit
Preamp and speaker-level inputs
Variable bass boost
Power Rating: 14.4V, ≤ 1% THD +N
The amp includes preamp- and speaker-level inputs
Install almost any vehicle, even one with a factory radio
Frequency Response: 20Hz – 400Hz
S/N Ratio: >75dB
optional RUX-KNOB.2 wired remote level control
Dimensions: 13.5” W x 2.6” H x 7.3” D
What is in the R2-A150M package:
Alpine R2-A150M owner's manual
Mono subwoofer amplifier
Four 1" pan-head screws
3mm Allen key
2.5mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine S2-A55V S-Series 5-Channel 540 Watts Car Audio Amplifier + 4 Gauge Amp Kit
$429.95
$800.00
Alpine S2-A55V S-Series Next Gen High-Resolution 5-Channel Car Audio Amplifier + Ansolute KIT4 4 Gauge AMP Kit
Alpine introduces the all-new S-Series amplifiers - a perfect match to the S-Series speakers. These amps have an excellent Watts-per-Euro ratio in the Class-D category, feature a very high heat resistance, and won’t shut down due to overheating. They also feature excellent sound quality in their price range.
General Features:
Class D 2 ohms Stable 5-Channel Amplifier
RMS Power Rating: 4 ohms: 40 watts x 4 channel + 200 watts x 1 channel
RMS Power Rating: 2 ohms: 60 watts x 4 channel + 300 watts x 1 channel
Bridged: 120 watts x 2 channel @ 4 ohms + 300 watts x 1 channel @ 2 ohms
Total power output: 540 watts
CEA-2006 Compliant Amplifier
LED Power/Protect Light
Includes preamp- and speaker-level (high-level) inputs
Wired remote bass level control included
3-way protection circuitry (thermal, overload, and speaker short protection)
Frequency Response: 10 - 30,000 Hz
Total Harmonic Distortion (THD): 1%
Signal Noise Ratio: 83 dB
Variable Bass Boost: 0 - 12 dB bass boost at 50 Hz
Fuse Rating: 60A
Enhanced Shutdown Performance technology
4 AWG gauge power and ground wiring is recommended for installation.
Dimensions: 13-1/4" W x 8-1/16" L x 2-5/16" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the S2-A55V package:
S2-A55V owner's manual
5-Channel amplifier
Two 30-amp ATO fuses
2 End caps
Four 3/4" Screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine S2-A55V S-Series 5-Channel 540 Watts Car Audio Amplifier + 0 Gauge Amp Kit
$439.95
$800.00
Alpine S2-A55V S-Series Next Gen High-Resolution 5-Channel Car Audio Amplifier + Ansolute KIT0 0 Gauge AMP Kit
Alpine introduces the all-new S-Series amplifiers - a perfect match to the S-Series speakers. These amps have an excellent Watts-per-Euro ratio in the Class-D category, feature a very high heat resistance, and won’t shut down due to overheating. They also feature excellent sound quality in their price range.
General Features:
Class D 2 ohms Stable 5-Channel Amplifier
RMS Power Rating: 4 ohms: 40 watts x 4 channel + 200 watts x 1 channel
RMS Power Rating: 2 ohms: 60 watts x 4 channel + 300 watts x 1 channel
Bridged: 120 watts x 2 channel @ 4 ohms + 300 watts x 1 channel @ 2 ohms
Total power output: 540 watts
CEA-2006 Compliant Amplifier
LED Power/Protect Light
Includes preamp- and speaker-level (high-level) inputs
Wired remote bass level control included
3-way protection circuitry (thermal, overload, and speaker short protection)
Frequency Response: 10 - 30,000 Hz
Total Harmonic Distortion (THD): 1%
Signal Noise Ratio: 83 dB
Variable Bass Boost: 0 - 12 dB bass boost at 50 Hz
Fuse Rating: 60A
Enhanced Shutdown Performance technology
4 AWG gauge power and ground wiring is recommended for installation.
Dimensions: 13-1/4" W x 8-1/16" L x 2-5/16" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the S2-A55V package:
S2-A55V owner's manual
5-Channel amplifier
Two 30-amp ATO fuses
2 End caps
Four 3/4" Screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine S2-A55V S-Series 5-Channel 540 Watts Car Audio Amplifier
$399.95
$800.00
Alpine S2-A55V S-Series Next Gen High-Resolution 5-Channel Car Audio Amplifier
Alpine introduces the all-new S-Series amplifiers - a perfect match for the speakers. These amps have an excellent Watts-per-Euro ratio in the Class-D category, feature a very high heat resistance, and won’t shut down due to overheating. They also feature excellent sound quality in their price range.
General Features:
Class D 2 ohms Stable 5-Channel Amplifier
RMS Power Rating: 4 ohms: 40 watts x 4 channel + 200 watts x 1 channel
RMS Power Rating: 2 ohms: 60 watts x 4 channel + 300 watts x 1 channel
Bridged: 120 watts x 2 channel @ 4 ohms + 300 watts x 1 channel @ 2 ohms
Total power output: 540 watts
CEA-2006 Compliant Amplifier
LED Power/Protect Light
Includes preamp- and speaker-level (high-level) inputs
Wired remote bass level control included
3-way protection circuitry (thermal, overload, and speaker short protection)
Frequency Response: 10 - 30,000 Hz
Total Harmonic Distortion (THD): 1%
Signal Noise Ratio: 83 dB
Variable Bass Boost: 0 - 12 dB bass boost at 50 Hz
Fuse Rating: 60A
Enhanced Shutdown Performance technology
4 AWG gauge power and ground wiring are recommended for installation.
Dimensions: 13-1/4" W x 8-1/16" L x 2-5/16" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the S2-A55V package:
S2-A55V owner's manual
5-Channel amplifier
Two 30-amp ATO fuses
2 End caps
Four 3/4" Screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier
$199.95
$400.00
Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier
The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.
General Features:
Hi-Res Audio Certified (Up to 40kHz)
Power Rating: 14.4V, < 0.3% THD +N
Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω
Bridged Power: 180W RMS x 2 @ 4Ω
4-Channel Amplifier
Alpine’s Class D Amplifier Circuit
Two-sided terminal layout
Built-in Selectable/ Adjustable Crossovers
Mid-Bass EQ Input for more power
Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)
Dimensions: 8.7” W x 2.25” H x 8.25” D
Weight: 4 lbs, 13 oz
S/N Ratio: >83dB
Frequency Response: 20Hz – 40kHz
Damping Factor: >100
Owner’s Manual
4 Self-tapping screws
Hexagon wrench
What is in the S2-A36F package:
S2-A36F owner's manual
4-Channel amplifier
2 End caps
Four 3/4" screws
Four 1/4" screws
2mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine R-Series R2-A150M 1500 W RMS High-Performance Class-D Mono Sub Amplifier
$599.95
$1,000.00
Alpine R-Series R2-A150M 1500 W RMS High-Performance Class-D Mono Sub Amplifier
The Alpine “R-Series” line of speakers, subwoofers, and amplifiers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience. They have a 15% reduced footprint compared to the previous models and are easier to install.If you like loud and clear music, our Alpine R-Series R2-A150M mono amplifier is for you. It cleanly reproduces the bass in your music so you can enjoy the enhanced realism you want, even when you're playing High-Res music. We built some of our top-of-the-line amplifier technology into this R2-Series amp, including high-efficiency transformers, premium low-noise custom capacitors, and low-distortion dual "Sierra" feedback/correction circuitry.The R2-A150M mono amplifier produces up to 1200 watts RMS @ 2 Ohms, making it a perfect match for the Alpine R-Series subwoofer line. Advanced Class-D amp technology makes this powerful amp small enough to fit almost any location. You can adjust the amp's low pass, bass boost, and subsonic filter to get the right bass tone. Plus, you can add the optional RUX-KNOB2 remote bass knob to control your bass from the dash.
General Features:
Mono subwoofer amplifier
1500W Mono Amplifier
RMS Power Output: 700W x 1 @ 4Ω
RMS Power Output: 1200W x 1 @ 2Ω
RMS Power Output: 1500W x 1 @ 1Ω
Class D Amplifier Circuit
Preamp and speaker-level inputs
Variable bass boost
Power Rating: 14.4V, ≤ 1% THD +N
The amp includes preamp- and speaker-level inputs
Install almost any vehicle, even one with a factory radio
Frequency Response: 20Hz – 400Hz
S/N Ratio: >75dB
optional RUX-KNOB.2 wired remote level control
Dimensions: 13.5” W x 2.6” H x 7.3” D
What is in the R2-A150M package:
Alpine R2-A150M owner's manual
Mono subwoofer amplifier
Four 1" pan-head screws
3mm Allen key
2.5mm Allen key
Owner's manual
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine
Alpine KTA-30MW Car Amplifier Mono 600W Weather Resistant Tough Power Pack Amp
$419.95
$700.95
Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier
A TOUGH MINI AMP THAT PACKS A PUNCH
Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack will surely deliver powerful bass output for subwoofers used in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags.
A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT
The KTA-30MW is perfect for adding subwoofer power but doesn’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice.
HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS
The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.
General Features:
Alpine KTA-30MW
Class D Monoblock Weather Resistant Power Pack Amplifier
300 Watts RMS X 1 @ 4 Ohms Power Handling
600 Watts RMS X 1 @ 2 Ohms Power Handling
CTA-2006 compliant
Frequency Response: 20-400 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 83dB
Variable Low Pass Filter 50-400Hz @ -24dB/Oct.
Variable Bass Boost (0-12 dB at 50 Hz)
Fuse Rating: 25A
Weather-resistant (IP66 rating)
Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to adapt to musical needs automatically
Dimensions: 7” W x 3.5” H x 1.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the KTA-30MW package:
KTA-30MW owner's manual
Mono amplifier
14" Power/signal harness
4 Self-tapping screws
Connection sheet
Limited Warranty sheet
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.