All Speaker Adapter Brackets (84)

Alpine R-S65.2 6.5" speaker for Honda 6.5" Or 6.75" Speaker Adapter With Speaker Harness Our Speaker Adapter Package is used to replace your factory speakers with higher-quality aftermarket speakers. Speaker adapters will allow you to quickly and easily replace your current car speakers. The adapter kit will mount the speakers securely in your vehicle without the need for modification. The harness will allow you to connect to your vehicle without cutting your factory wiring while maintaining the proper polarity of the speakers. By using an adapter/harness kit you can easily reverse the installation should you decide to sell or trade your vehicle. You can then install your higher-quality speakers in a new vehicle.Interchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange SpeakerHarnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura: 2007-2012 RDX - Front And Rear Speaker Locations 2009-2013 TL - Front And Rear Speaker Locations 2009-2013 TSX - Front And Rear Speaker Locations Honda: 2008-2012 Accord - Front And Rear Speaker Locations 2012-2013 Crosstour - Front And Rear Speaker Locations 2010-2011 Accord Crosstour - Front And Rear Speaker Locations 2006-2013 Civic - Front And Rear Speaker Locations 2012-2013 CR-V - Front And Rear Speaker Locations 2011-2013 CR-Z - Front And Rear Speaker Locations 2010-2013 Insight - Front And Rear Speaker Locations 2011-2013 Odyssey - Front And Rear Speaker Locations Alpine R-S65.2 (RS652) 300W MAX 100W RMS R-Series 6-1/2" 2-way Car Speakers TURN IT UP WITHOUT TURNING DOWN SOUND QUALITY If you play your music loud and want others to know, the R-Series speakers are the match for you. You will enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. MORE OUTPUT FOR MORE FUN The woofers have a large, 35-millimeter (mm) voice coil which allows for more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling, for superior control and output. The R-Series speakers incorporate Alpine’s patented High-Amplitude Multi-Roll Surround (H.A.M.R.) for control and accuracy. The component models use a crossover with in-line, passive design, and reduced footprint, which contributes to easier installation. General Features: 6-1/2" 2-way car speakers (pair) carbon-fiber-reinforced polymer (CFRP) woofer carbon-fiber-reinforced polymer dome tweeter handles up to 100 watts RMS (300 watts peak power) frequency response: 65-40,000 Hz sensitivity: 88 dB top-mount depth: 2-5/8" grilles included Authorized Dealer 1-year Manufacturer's Warranty What is in the R-S65.2 package: Two 2-way Speakers Two 6-1/2" Adapter rings (includes GM/Chrysler) 2 Grilles 2 Grille badges Eight 1-1/8" Screws Eight M4x12mm Machine screws 8 Speed clips Warranty information Important Notice Online product registration information Template and specs on the box R-S65.2 owner's manual Honda Speaker Adapter Kit Honda/Acura 6 1/2"-6 3/4" Speaker Adapters. For Select Acura and Honda models. Installs 6 1/2" or 6 3/4" Speakers. Dimension: 17"Lx 10"Wx 2"H. Weight: 0.3 Lbs. Speaker Connector Harnesses Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's factory harness without the need to cut or splice the factory wires. Features a high impact, OEM quality ABS plastic molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance. The precision hand assembled terminals are pressure-inserted into the plug making it virtually impossible to pull a wire out. ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Alpine S-S65 6.5" speaker for Honda 6.5" Or 6.75" Speaker Adapter With Speaker HarnessInterchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange SpeakerHarnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura: 2007-2012 RDX - Front And Rear Speaker Locations 2009-2013 TL - Front And Rear Speaker Locations 2009-2013 TSX - Front And Rear Speaker Locations Honda: 2008-2012 Accord - Front And Rear Speaker Locations 2012-2013 Crosstour - Front And Rear Speaker Locations 2010-2011 Accord Crosstour - Front And Rear Speaker Locations 2006-2013 Civic - Front And Rear Speaker Locations 2012-2013 CR-V - Front And Rear Speaker Locations 2011-2013 CR-Z - Front And Rear Speaker Locations 2010-2013 Insight - Front And Rear Speaker Locations 2011-2013 Odyssey - Front And Rear Speaker Locations Alpine S-S65 480W Max (160W RMS) 6.5" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 6.5-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6.5" S Series 2-way Coaxial Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each RMS Power Handling: 160 watts per pair / 80 watts each Carbon Fiber Reinforced Plastic cone material High Roll Foam speaker surround 1" Silk Dome Tweeters Neodymium magnet motor structure Top-mount Depth: 2.28" Cutout Dimensions: 5" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Grilles are sold separately Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S-S65 Package: S-S65 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws 8 Speed clips Warranty information Important Notice sheet Template and specs on the box Honda Speaker Adapter Kit Honda/Acura 6 1/2"-6 3/4" Speaker Adapters. For Select Acura and Honda models. Installs 6 1/2" or 6 3/4" Speakers. Dimension: 17"Lx 10"Wx 2"H. Weight: 0.3 Lbs. Speaker Connector Harnesses Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's factory harness without the need to cut or splice the factory wires. Features a high impact, OEM quality ABS plastic molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance. The precision hand-assembled terminals are pressure-inserted into the plug, making it virtually impossible to pull a wire out. ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-S65C 6.5" Component speaker for Honda 6.5" Or 6.75" Speaker Adapter With Speaker HarnessInterchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange SpeakerHarnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura: 2007-2012 RDX - Front And Rear Speaker Locations 2009-2013 TL - Front And Rear Speaker Locations 2009-2013 TSX - Front And Rear Speaker Locations Honda: 2008-2012 Accord - Front And Rear Speaker Locations 2012-2013 Crosstour - Front And Rear Speaker Locations 2010-2011 Accord Crosstour - Front And Rear Speaker Locations 2006-2013 Civic - Front And Rear Speaker Locations 2012-2013 CR-V - Front And Rear Speaker Locations 2011-2013 CR-Z - Front And Rear Speaker Locations 2010-2013 Insight - Front And Rear Speaker Locations 2011-2013 Odyssey - Front And Rear Speaker Locations Alpine S-S65C 480W Peak (160W RMS) 6.5" Component Type  S-Series  2-way Component Speaker set with 1" Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features: 6-1/2" S Series 2-way Component System Car Speakers Power Handling: Polypropylene-Mica cone material Rubber speaker surround 1" Silk Dome Tweeters H.A.M.R. (High Amplitude Multi-Roll) surround First Carbon Fiber Reinforced Plastic (CFRP) 1.38" Voice coil magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Speaker grilles are sold separately Authorized Internet Dealer 1-year Manufacture Electronix Warranty What is in the S-S65C package: S-S65C owner's manual 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box Honda Speaker Adapter Kit Honda/Acura 6 1/2"-6 3/4" Speaker Adapters. For Select Acura and Honda models. Installs 6 1/2" or 6 3/4" Speakers. Dimension: 17"Lx 10"Wx 2"H. Weight: 0.3 Lbs. Speaker Connector Harnesses Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's factory harness without the need to cut or splice the factory wires. Features a high impact, OEM quality ABS plastic molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance. The precision hand-assembled terminals are pressure-inserted into the plug making it virtually impossible to pull a wire out. ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-S65C 6.5" Component speaker for Honda 6.5" Or 6.75" Speaker Adapter With Speaker Harness Our Speaker Adapter Package is used to replace your factory speakers with higher-quality aftermarket speakers. Speaker adapters will allow you to quickly and easily replace your current car speakers. The adapter kit will mount the speakers securely in your vehicle without the need for modification. The harness will allow you to connect to your vehicle without cutting your factory wiring while maintaining the proper polarity of the speakers. By using an adapter/harness kit you can easily reverse the installation should you decide to sell or trade your vehicle. You can then install your higher-quality speakers in a new vehicle.Interchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange SpeakerHarnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura: 2007-2012 RDX - Front And Rear Speaker Locations 2009-2013 TL - Front And Rear Speaker Locations 2009-2013 TSX - Front And Rear Speaker Locations Honda: 2008-2012 Accord - Front And Rear Speaker Locations 2012-2013 Crosstour - Front And Rear Speaker Locations 2010-2011 Accord Crosstour - Front And Rear Speaker Locations 2006-2013 Civic - Front And Rear Speaker Locations 2012-2013 CR-V - Front And Rear Speaker Locations 2011-2013 CR-Z - Front And Rear Speaker Locations 2010-2013 Insight - Front And Rear Speaker Locations 2011-2013 Odyssey - Front And Rear Speaker Locations Alpine S-S65C 240W 6.5" Component Type-S 2 way speaker set w/ Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features: 6-1/2" Type-S Series Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each RMS Power Handling: 160 watts per pair / 80 watts each (CEA-2031 Certified) Tuned poly-mica cone woofer Butyl rubber surround for natural response and stability 1" Wide-Range Silk dome tweeter Optimized air-flow design Progressive Aramid Fiber Spider with optimized shape for deep bass and linearity HD Polymer frame FEA optimized motor structure OEM mounting adapters included Swivel-mount tweeter 4 ohms impedance Square-wire short voice coil New cone design allows for faster energy transfer & clarity Aramid reinforced TIL bobbin holds voice coil wire very rigid High-grade network components Neodymium tweeter magnet structure Low distortion strontium woofer magnet Speaker grilles KTE-S610G optional and sold separately Top-mount depth: 2-1/4" What is in the S-S65C package: 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters (each has a 29" length of wire attached) 2 Flush mount housings (with tweeters installed) 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers (each has quick slides on both ends) 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box S-S65C owner's manual Honda Speaker Adapter Kit Honda/Acura 6 1/2"-6 3/4" Speaker Adapters. For Select Acura and Honda models. Installs 6 1/2" or 6 3/4" Speakers. Dimension: 17"Lx 10"Wx 2"H. Weight: 0.3 Lbs. Speaker Connector Harnesses Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's factory harness without the need to cut or splice the factory wires. Features a high impact, OEM quality ABS plastic molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance. The precision hand assembled terminals are pressure-inserted into the plug making it virtually impossible to pull a wire out. ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Alpine S-S65C 6.5" Component speaker for Honda 6.5" Or 6.75" Speaker Adapter With Speaker HarnessInterchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange SpeakerHarnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura: 2007-2012 RDX - Front And Rear Speaker Locations 2009-2013 TL - Front And Rear Speaker Locations 2009-2013 TSX - Front And Rear Speaker Locations Honda: 2008-2012 Accord - Front And Rear Speaker Locations 2012-2013 Crosstour - Front And Rear Speaker Locations 2010-2011 Accord Crosstour - Front And Rear Speaker Locations 2006-2013 Civic - Front And Rear Speaker Locations 2012-2013 CR-V - Front And Rear Speaker Locations 2011-2013 CR-Z - Front And Rear Speaker Locations 2010-2013 Insight - Front And Rear Speaker Locations 2011-2013 Odyssey - Front And Rear Speaker Locations Alpine S-S65C 480W Peak (160W RMS) 6.5" Component Type  S-Series  2-way Component Speaker set with 1" Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features: 6-1/2" S Series 2-way Component System Car Speakers Power Handling: Polypropylene-Mica cone material Rubber speaker surround 1" Silk Dome Tweeters H.A.M.R. (High Amplitude Multi-Roll) surround First Carbon Fiber Reinforced Plastic (CFRP) 1.38" Voice coil magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Speaker grilles are sold separately Authorized Internet Dealer 1-year Manufacture Electronix Warranty What is in the S-S65C package: S-S65C owner's manual 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box Honda Speaker Adapter Kit Honda/Acura 6 1/2"-6 3/4" Speaker Adapters. For Select Acura and Honda models. Installs 6 1/2" or 6 3/4" Speakers. Dimension: 17"Lx 10"Wx 2"H. Weight: 0.3 Lbs. Speaker Connector Harnesses Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's factory harness without the need to cut or splice the factory wires. Features a high impact, OEM quality ABS plastic molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance. The precision hand-assembled terminals are pressure-inserted into the plug making it virtually impossible to pull a wire out. ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Kenwood KFC1666S 6.5" speaker for Honda 6.5" Or 6.75" Speaker Adapter With Speaker Harness Our Speaker Adapter Package is used to replace your factory speakers with higher-quality aftermarket speakers. Speaker adapters will allow you to quickly and easily replace your current car speakers. The adapter kit will mount the speakers securely in your vehicle without the need for modification. The harness will allow you to connect to your vehicle without cutting your factory wiring while maintaining the proper polarity of the speakers. By using an adapter/harness kit you can easily reverse the installation should you decide to sell or trade your vehicle. You can then install your higher-quality speakers in a new vehicle.Interchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange SpeakerHarnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura: 2007-2012 RDX - Front And Rear Speaker Locations 2009-2013 TL - Front And Rear Speaker Locations 2009-2013 TSX - Front And Rear Speaker Locations Honda: 2008-2012 Accord - Front And Rear Speaker Locations 2012-2013 Crosstour - Front And Rear Speaker Locations 2010-2011 Accord Crosstour - Front And Rear Speaker Locations 2006-2013 Civic - Front And Rear Speaker Locations 2012-2013 CR-V - Front And Rear Speaker Locations 2011-2013 CR-Z - Front And Rear Speaker Locations 2010-2013 Insight - Front And Rear Speaker Locations 2011-2013 Odyssey - Front And Rear Speaker Locations Kenwood KFC-1666S 6.5" Car Stereo Speaker Kenwood KFC-1666S 300W 6.5" 2-Way Sport Series Flush Mount Coaxial Speakers w/ Paper Tweeters General Features: 6.5" Sport Series 2-Way Flush Mount Car Speakers Power Handling: Peak: 300 watts RMS: 30 watts 6-1/2" polypropylene cone 1" balanced dome tweeter 4 ohms impedance Frequency Response: 35-22,000 Hz Top-mount Depth: 1-11/16" Sensitivity: 92dB Technical Specifications: System: 2 Ways Coaxial Impedance (Ω):4Ω Peak Input Power (W):300W Sensitivity (dB at 1m):90dB Frequency Response (Hz):40-22000Hz Diaphragm: PP Silver Size:6.5in Surround: Cloth Magnet: Ferrite Diaphragm: Balanced Dome Size: 1 in. Magnet Material: Neodymium Cutout Diameter:4-7/8 in. Tweeter Height:5/16 in. Mounting Depth:1-11/16 in. What is in the KFC-1666S Package: KFCC-1666S Owner's manual Two 2-way speakers 2 Grilles Two 12" Lengths of speaker wire (each has female quick-slides on one end and bare wire on the other) Eight 1" Self-tapping screws 8 Speed clips Warranty information Honda Speaker Adapter Kit Honda/Acura 6 1/2"-6 3/4" Speaker Adapters. For Select Acura and Honda models. Installs 6 1/2" or 6 3/4" Speakers. Dimension: 17"Lx 10"Wx 2"H. Weight: 0.3 Lbs. Speaker Connector Harnesses Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's factory harness without the need to cut or splice the factory wires. Features a high impact, OEM quality ABS plastic molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance. The precision hand assembled terminals are pressure-inserted into the plug making it virtually impossible to pull a wire out. ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Kenwood KFC1666S 6.5" speaker for Honda 6.5" Or 6.75" Speaker Adapter With Speaker Harness Our Speaker Adapter Package is used to replace your factory speakers with higher-quality aftermarket speakers. Speaker adapters will allow you to quickly and easily replace your current car speakers. The adapter kit will mount the speakers securely in your vehicle without the need for modification. The harness will allow you to connect to your vehicle without cutting your factory wiring while maintaining the proper polarity of the speakers. By using an adapter/harness kit you can easily reverse the installation should you decide to sell or trade your vehicle. You can then install your higher-quality speakers in a new vehicle.Interchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange SpeakerHarnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura: 2007-2012 RDX - Front And Rear Speaker Locations 2009-2013 TL - Front And Rear Speaker Locations 2009-2013 TSX - Front And Rear Speaker Locations Honda: 2008-2012 Accord - Front And Rear Speaker Locations 2012-2013 Crosstour - Front And Rear Speaker Locations 2010-2011 Accord Crosstour - Front And Rear Speaker Locations 2006-2013 Civic - Front And Rear Speaker Locations 2012-2013 CR-V - Front And Rear Speaker Locations 2011-2013 CR-Z - Front And Rear Speaker Locations 2010-2013 Insight - Front And Rear Speaker Locations 2011-2013 Odyssey - Front And Rear Speaker Locations Kenwood KFC-1666S 6.5" Car Stereo Speaker Kenwood KFC-1666S 300W 6.5" 2-Way Sport Series Flush Mount Coaxial Speakers w/ Paper Tweeters General Features: 6.5" Sport Series 2-Way Flush Mount Car Speakers Power Handling: Peak: 300 watts RMS: 30 watts 6-1/2" polypropylene cone 1" balanced dome tweeter 4 ohms impedance Frequency Response: 35-22,000 Hz Top-mount Depth: 1-11/16" Sensitivity: 92dB Technical Specifications: System: 2 Ways Coaxial Impedance (Ω):4Ω Peak Input Power (W):300W Sensitivity (dB at 1m):90dB Frequency Response (Hz):40-22000Hz Diaphragm: PP Silver Size:6.5in Surround: Cloth Magnet: Ferrite Diaphragm: Balanced Dome Size: 1 in. Magnet Material: Neodymium Cutout Diameter:4-7/8 in. Tweeter Height:5/16 in. Mounting Depth:1-11/16 in. What is in the KFC-1666S Package: KFCC-1666S Owner's manual Two 2-way speakers 2 Grilles Two 12" Lengths of speaker wire (each has female quick-slides on one end and bare wire on the other) Eight 1" Self-tapping screws 8 Speed clips Warranty information Honda Speaker Adapter Kit Honda/Acura 6 1/2"-6 3/4" Speaker Adapters. For Select Acura and Honda models. Installs 6 1/2" or 6 3/4" Speakers. Dimension: 17"Lx 10"Wx 2"H. Weight: 0.3 Lbs. Speaker Connector Harnesses Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's factory harness without the need to cut or splice the factory wires. Features a high impact, OEM quality ABS plastic molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance. The precision hand assembled terminals are pressure-inserted into the plug making it virtually impossible to pull a wire out. ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

2 Set Kenwood KFC1666S 6.5" speaker for Honda 6.5" Or 6.75" Speaker Adapter With Speaker Harness Our Speaker Adapter Package is used to replace your factory speakers with higher-quality aftermarket speakers. Speaker adapters will allow you to quickly and easily replace your current car speakers. The adapter kit will securely mount the speakers in your vehicle without modification. The harness will allow you to connect to your vehicle without cutting your factory wiring while maintaining the proper polarity of the speakers. You can easily reverse the installation using an adapter/harness kit if you sell or trade your vehicle. You can then install your higher-quality speakers in a new car.Interchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange SpeakerHarnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura: 2007-2012 RDX - Front And Rear Speaker Locations 2009-2013 TL - Front And Rear Speaker Locations 2009-2013 TSX - Front And Rear Speaker Locations Honda: 2008-2012 Accord - Front And Rear Speaker Locations 2012-2013 Crosstour - Front And Rear Speaker Locations 2010-2011 Accord Crosstour - Front And Rear Speaker Locations 2006-2013 Civic - Front And Rear Speaker Locations 2012-2013 CR-V - Front And Rear Speaker Locations 2011-2013 CR-Z - Front And Rear Speaker Locations 2010-2013 Insight - Front And Rear Speaker Locations 2011-2013 Odyssey - Front And Rear Speaker Locations Kenwood KFC-1666S 6.5" Car Stereo Speaker Kenwood KFC-1666S 300W 6.5" 2-Way Sport Series Flush Mount Coaxial Speakers w/ Paper Tweeters General Features: 6.5" Sport Series 2-Way Flush Mount Car Speakers Power Handling: Peak: 300 watts RMS: 30 watts 6-1/2" polypropylene cone 1" balanced dome tweeter 4 ohms impedance Frequency Response: 35-22,000 Hz Top-mount Depth: 1-11/16" Sensitivity: 92dB Technical Specifications: System: 2 Ways Coaxial Impedance (Ω):4Ω Peak Input Power (W):300W Sensitivity (dB at 1m):90dB Frequency Response (Hz):40-22000Hz Diaphragm: PP Silver Size:6.5in Surround: Cloth Magnet: Ferrite Diaphragm: Balanced Dome Size: 1 in. Magnet Material: Neodymium Cutout Diameter:4-7/8 in. Tweeter Height:5/16 in. Mounting Depth:1-11/16 in. What is in the KFC-1666S Package: KFCC-1666S Owner's manual Two 2-way speakers 2 Grilles Two 12" Lengths of speaker wire (each has female quick-slides on one end and bare wire on the other) Eight 1" Self-tapping screws 8 Speed clips Warranty information Honda Speaker Adapter Kit Honda/Acura 6 1/2"-6 3/4" Speaker Adapters. For Select Acura and Honda models. Installs 6 1/2" or 6 3/4" Speakers. Dimension: 17"Lx 10"Wx 2"H. Weight: 0.3 Lbs. Speaker Connector Harnesses Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's factory harness without cutting or splinting the factory wires. It features a high-impact, OEM-quality ABS plastic molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance. The precision hand-assembled terminals are pressure-inserted into the plug, making it virtually impossible to pull a wire out. Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

American International & Metra Honda 6.5" Or 6.75" Speaker Adapter With Speaker Harness Our Speaker Adapter Package is used to replace your factory speakers with higher-quality aftermarket speakers. Speaker adapters will allow you to quickly and easily replace your current car speakers. The adapter kit will mount the speakers securely in your vehicle without the need for modification. The harness will allow you to connect to your vehicle without cutting your factory wiring while maintaining the proper polarity of the speakers. By using an adapter/harness kit you can easily reverse the installation should you decide to sell or trade your vehicle. You can then install your higher-quality speakers in a new vehicle.Interchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange SpeakerHarnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura: 2007-2012 RDX - Front And Rear Speaker Locations 2009-2013 TL - Front And Rear Speaker Locations 2009-2013 TSX - Front And Rear Speaker Locations Honda: 2008-2012 Accord - Front And Rear Speaker Locations 2012-2013 Crosstour - Front And Rear Speaker Locations 2010-2011 Accord Crosstour - Front And Rear Speaker Locations 2006-2013 Civic - Front And Rear Speaker Locations 2012-2013 CR-V - Front And Rear Speaker Locations 2011-2013 CR-Z - Front And Rear Speaker Locations 2010-2013 Insight - Front And Rear Speaker Locations 2011-2013 Odyssey - Front And Rear Speaker Locations Honda Speaker Adapter Kit Honda/Acura 6 1/2"-6 3/4" Speaker Adapters. For Select Acura and Honda models. Installs 6 1/2" or 6 3/4" Speakers. Dimension: 17"Lx 10"Wx 2"H. Weight: 0.3 Lbs. Speaker Connector Harnesses Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's factory harness without the need to cut or splice the factory wires. Features a high impact, OEM quality ABS plastic molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance. The precision hand assembled terminals are pressure-inserted into the plug making it virtually impossible to pull a wire out. ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

2 Set Kenwood KFC1666S 6.5" speaker for Honda 6.5" Or 6.75" Speaker Adapter With Speaker Harness Our Speaker Adapter Package replaces your factory speakers with higher-quality aftermarket speakers. Speaker adapters will allow you to quickly and easily replace your current car speakers. The adapter kit will securely mount the speakers in your vehicle without modification. The harness will allow you to connect to your vehicle without cutting your factory wiring while maintaining the proper polarity of the speakers. Using an adapter/harness kit, you can quickly reverse the installation if you sell or trade your vehicle. You can then install your higher-quality speakers in a new car.Interchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange SpeakerHarnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura: 2007-2012 RDX - Front And Rear Speaker Locations 2009-2013 TL - Front And Rear Speaker Locations 2009-2013 TSX - Front And Rear Speaker Locations Honda: 2008-2012 Accord - Front And Rear Speaker Locations 2012-2013 Crosstour - Front And Rear Speaker Locations 2010-2011 Accord Crosstour - Front And Rear Speaker Locations 2006-2013 Civic - Front And Rear Speaker Locations 2012-2013 CR-V - Front And Rear Speaker Locations 2011-2013 CR-Z - Front And Rear Speaker Locations 2010-2013 Insight - Front And Rear Speaker Locations 2011-2013 Odyssey - Front And Rear Speaker Locations Kenwood KFC-1666S 6.5" Car Stereo Speaker Kenwood KFC-1666S 300W 6.5" 2-Way Sport Series Flush Mount Coaxial Speakers w/ Paper Tweeters General Features: 6.5" Sport Series 2-Way Flush Mount Car Speakers Power Handling: Peak: 300 watts RMS: 30 watts 6-1/2" polypropylene cone 1" balanced dome tweeter 4 ohms impedance Frequency Response: 35-22,000 Hz Top-mount Depth: 1-11/16" Sensitivity: 92dB Technical Specifications: System: 2 Ways Coaxial Impedance (Ω):4Ω Peak Input Power (W):300W Sensitivity (dB at 1m):90dB Frequency Response (Hz):40-22000Hz Diaphragm: PP Silver Size:6.5in Surround: Cloth Magnet: Ferrite Diaphragm: Balanced Dome Size: 1 in. Magnet Material: Neodymium Cutout Diameter:4-7/8 in. Tweeter Height:5/16 in. Mounting Depth:1-11/16 in. What is in the KFC-1666S Package: KFCC-1666S Owner's manual Two 2-way speakers 2 Grilles Two 12" Lengths of speaker wire (each has female quick-slides on one end and bare wire on the other) Eight 1" Self-tapping screws 8 Speed clips Warranty information Honda Speaker Adapter Kit Honda/Acura 6 1/2"-6 3/4" Speaker Adapters. For Select Acura and Honda models. Installs 6 1/2" or 6 3/4" Speakers. Dimension: 17"Lx 10"Wx 2"H. Weight: 0.3 Lbs. Speaker Connector Harnesses Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's factory harness without cutting or splinting the factory wires. It features a high-impact, OEM-quality ABS plastic molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance. The precision hand-assembled terminals are pressure-inserted into the plug, making it virtually impossible to pull a wire out. Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Honda 6.5" Or 6.75" Speaker Adapter With Speaker Harness Our Speaker Adapter Package is used to replace your factory speakers with higher-quality aftermarket speakers. Speaker adapters will allow you to quickly and easily replace your current car speakers. The adapter kit will mount the speakers securely in your vehicle without the need for modification. The harness will allow you to connect to your vehicle without cutting your factory wiring while maintaining the proper polarity of the speakers. By using an adapter/harness kit, you can easily reverse the installation should you decide to sell or trade your vehicle. You can then install your higher-quality speakers in a new vehicle.Interchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange SpeakerHarnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura: 2007-2012 RDX - Front And Rear Speaker Locations 2009-2013 TL - Front And Rear Speaker Locations 2009-2013 TSX - Front And Rear Speaker Locations Honda: 2008-2012 Accord - Front And Rear Speaker Locations 2012-2013 Crosstour - Front And Rear Speaker Locations 2010-2011 Accord Crosstour - Front And Rear Speaker Locations 2006-2013 Civic - Front And Rear Speaker Locations 2012-2013 CR-V - Front And Rear Speaker Locations 2011-2013 CR-Z - Front And Rear Speaker Locations 2010-2013 Insight - Front And Rear Speaker Locations 2011-2013 Odyssey - Front And Rear Speaker Locations Honda Speaker Adapter Kit Honda/Acura 6 1/2"-6 3/4" Speaker Adapters. For Select Acura and Honda models. Installs 6 1/2" or 6 3/4" Speakers. Dimension: 17"Lx 10"Wx 2"H. Weight: 0.3 Lbs. Speaker Connector Harnesses Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's factory harness without the need to cut or splice the factory wires. It features a high-impact, OEM-quality ABS plastic molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance. The precision hand-assembled terminals are pressure-inserted into the plug, making it virtually impossible to pull a wire out. ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Set Honda 6.5" Or 6.75" Speaker Adapter With Speaker Harness Our Speaker Adapter Package is used to replace your factory speakers with higher-quality aftermarket speakers. Speaker adapters will allow you to quickly and easily replace your current car speakers. The adapter kit will mount the speakers securely in your vehicle without the need for modification. The harness will allow you to connect to your vehicle without cutting your factory wiring while maintaining the proper polarity of the speakers. By using an adapter/harness kit you can easily reverse the installation should you decide to sell or trade your vehicle. You can then install your higher-quality speakers in a new vehicle.Interchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634Interchange SpeakerHarnesses: Metra 72-7800, Scosche SHHA02BVehicle Compatibility:Acura: 2007-2012 RDX - Front And Rear Speaker Locations 2009-2013 TL - Front And Rear Speaker Locations 2009-2013 TSX - Front And Rear Speaker Locations Honda: 2008-2012 Accord - Front And Rear Speaker Locations 2012-2013 Crosstour - Front And Rear Speaker Locations 2010-2011 Accord Crosstour - Front And Rear Speaker Locations 2006-2013 Civic - Front And Rear Speaker Locations 2012-2013 CR-V - Front And Rear Speaker Locations 2011-2013 CR-Z - Front And Rear Speaker Locations 2010-2013 Insight - Front And Rear Speaker Locations 2011-2013 Odyssey - Front And Rear Speaker Locations Honda Speaker Adapter Kit Honda/Acura 6 1/2"-6 3/4" Speaker Adapters. For Select Acura and Honda models. Installs 6 1/2" or 6 3/4" Speakers. Dimension: 17"Lx 10"Wx 2"H. Weight: 0.3 Lbs. Speaker Connector Harnesses Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's factory harness without the need to cut or splice the factory wires. Features a high impact, OEM quality ABS plastic molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance. The precision hand assembled terminals are pressure-inserted into the plug making it virtually impossible to pull a wire out. ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Absolute Car Stereo Door Speaker Adapter Mounting Plates 6.5 Inch 6.75 Inch 2 pair of speaker adapter plates + 2 pairs of speaker harnesses Interchange Part Number: Metra 82-7805 Scosche SAHC634, Metra 72-7800 General Features:: Speaker Adapter Plates Features: Car Stereo Door Speaker Adapter Made For Honda Acura 2006-2011 Made Specifically For 6.5" - 6.75" Speakers Made From High-Grade Materials For A Long Lasting Fit Constructed From Durable ABS Plastic Makes Installation Quick And Simple Package Comes In Pair Compatible Vehicles:For Acura: 2007-2013 RDX - Front And Rear Speaker Locations 2009-2013 TL - Front And Rear Speaker Locations 2009-2013 TSX - Front And Rear Speaker Locations For Honda: 2008-2012 Accord - Front And Rear Speaker Locations 2006-2014 Civic - Front And Rear Speaker Locations 2010-2012 Crosstour - Front And Rear Speaker Locations 2011-2016 CR-V - Front And Rear Speaker Locations 2011-2014 CR-Z - Front And Rear Speaker Locations 2010-2013 Insight - Front And Rear Speaker Locations 2011-2014 Odyssey - Front And Rear Speaker Locations ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Absolute Car Stereo Door Speaker Adapter Mounting Plates 6.5 Inch 6.75 Inch 2 pair of speaker adapter plates + 2 pairs of speaker harnesses Interchange Part Number: Metra 82-7805 Scosche SAHC634, Metra 72-7800 General Features:: Speaker Adapter Plates Features: Car Stereo Door Speaker Adapter Made For Honda Acura 2006-2011 Made Specifically For 6.5" - 6.75" Speakers Made From High-Grade Materials For A Long Lasting Fit Constructed From Durable ABS Plastic Makes Installation Quick And Simple Package Comes In Pair Compatible Vehicles:For Acura: 2007-2013 RDX - Front And Rear Speaker Locations 2009-2013 TL - Front And Rear Speaker Locations 2009-2013 TSX - Front And Rear Speaker Locations For Honda: 2008-2012 Accord - Front And Rear Speaker Locations 2006-2014 Civic - Front And Rear Speaker Locations 2010-2012 Crosstour - Front And Rear Speaker Locations 2011-2016 CR-V - Front And Rear Speaker Locations 2011-2014 CR-Z - Front And Rear Speaker Locations 2010-2013 Insight - Front And Rear Speaker Locations 2011-2014 Odyssey - Front And Rear Speaker Locations ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov