

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Peavey PVXp 10 10" Bluetooth Powered Loudspeaker + 2 XLR Cable
$509.99
$599.99
Peavey PVXP10 DSP 10-inch Powered Speaker 520W 10" Powered Speaker with 1" Compression Driver+ 2 MR DJ USA 6 Feet XLR Cable
Peavey PVXp 10-inch 520-watt Powered Speaker with 1" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP
The Peavey PVXp 10 is a Bluetooth Powered Loudspeaker 10-Inch. The PVXp 10 Bluetooth features a reliable bi-amped power section that provides 520 Watts of peak dynamic power with DSP-based compression and limiting. This enclosure features a 10" heavy-duty woofer with a 2 3/8-inch voice coil and 50-ounce magnet and the RX10 compression driver with a 1-inch titanium diaphragm on a 100-degree horizontal x 60-degree vertical pattern asymmetrical horn. The PVXp 10 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4" inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator that can be set to light when power is on and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector—full-coverage heavy-duty perforated steel grilles with powder coat finish. DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-precision. Peavey's Quadratic Throat Waveguide technology, 100 by 60-degree coverage. The asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads. Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input. Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack. Each channel has a level control and a 3-band EQ section to adjust and shape the input signals.
General Features:
Two-way bi-amped sound reinforcement enclosure
RX™10 compression driver, with 1-inch titanium diaphragm
Reliable fan-cooled power amps with DSP protection
Total of 520W peak dynamic power
DSP control for precise crossover, EQ, and limiting functions
Bluetooth® input is via a dedicated input channel
Mix/Thru Output is via a male XLR jack
Durable plastic injection-molded trapezoidal enclosure
The extra angled section on the right side allows floor monitor use
Pole mount molded-in for 1 3/8" diameter poles
Top and bottom flying point inserts
10" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet
Full-coverage heavy-duty perforated steel grilles with powder coat finish
DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision
Peavey's Quadratic Throat Waveguide™ technology, 100 by 60-degree coverage
Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads
Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input
Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack
Each channel has a level control and a 3-band EQ section to adjust and shape the input signals
Packed Weight: 34.18 lb (15.5 kg)
Packed Length: 22.441" (57 cm)
Packed Width: 15.945" (40.5 cm)
Packed Height: 14.37" (36.5 cm)
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Peavey PVXp 10 10" Bluetooth Powered Loudspeaker + Speaker Stand
$509.99
$599.99
Peavey PVXP10 DSP 10 inch Powered Speaker 520W 10" Powered Speaker with 1" Compression Driver,+ MR DJ USA SS350 Speaker Stand
Peavey PVXp 10-inch 520-watt Powered Speaker with 1" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP
The Peavey PVXp 10 is a Bluetooth Powered Loudspeaker 10-Inch. The PVXp 10 Bluetooth features a reliable bi-amped power section that provides 520 Watts of peak dynamic power with DSP-based compression and limiting. This enclosure features a 10" heavy-duty woofer with a 2 3/8-inch voice coil and 50-ounce magnet and the RX10 compression driver with a 1-inch titanium diaphragm on a 100-degree horizontal x 60-degree vertical pattern asymmetrical horn. The PVXp 10 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4" inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator that can be set to light when power is on and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector—full-coverage heavy-duty perforated steel grilles with powder coat finish. DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-precision. Peavey's Quadratic Throat Waveguide technology, 100 by 60-degree coverage. The asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads. Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input. Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack. Each channel has a level control and a 3-band EQ section to adjust and shape the input signals.
General Features:
Two-way bi-amped sound reinforcement enclosure
RX™10 compression driver, with 1-inch titanium diaphragm
Reliable fan-cooled power amps with DSP protection
Total of 520W peak dynamic power
DSP control for precise crossover, EQ, and limiting functions
Bluetooth® input is via a dedicated input channel
Mix/Thru Output is via a male XLR jack
Durable plastic injection-molded trapezoidal enclosure
The extra angled section on the right side allows floor monitor use
Pole mount molded-in for 1 3/8" diameter poles
Top and bottom flying point inserts
10" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet
Full-coverage heavy-duty perforated steel grilles with powder coat finish
DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision
Peavey's Quadratic Throat Waveguide™ technology, 100 by 60-degree coverage
Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads
Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input
Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack
Each channel has a level control and a 3-band EQ section to adjust and shape the input signals
Packed Weight: 34.18 lb (15.5 kg)
Packed Length: 22.441" (57 cm)
Packed Width: 15.945" (40.5 cm)
Packed Height: 14.37" (36.5 cm)
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Peavey PVXp 10 DSP 510-Watt 10 inch Powered Speaker
$499.99
$579.19
Peavey PVXp 10-inch 520-watt Powered Speaker with 1" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP
The Peavey PVXp 10 is a Bluetooth Powered Loudspeaker 10-Inch. The PVXp 10 Bluetooth features a reliable bi-amped power section that provides 520 Watts of peak dynamic power with DSP-based compression and limiting. This enclosure features a 10" heavy-duty woofer with a 2 3/8-inch voice coil and 50-ounce magnet and the RX10 compression driver with a 1-inch titanium diaphragm on a 100-degree horizontal x 60-degree vertical pattern asymmetrical horn. The PVXp 10 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4" inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator that can be set to light when power is on and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector—full-coverage heavy-duty perforated steel grilles with powder coat finish. DSP I/O is 48 kHz and 24 bits; internal processing is 56-bit double-precision: Peavey's Quadratic Throat Waveguide technology, 100 by 60-degree coverage. The asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads. Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input. Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack. Each channel has a level control and a 3-band EQ section to adjust and shape the input signals.
General Features:
Two-way bi-amped sound reinforcement enclosure
RX™10 compression driver, with 1-inch titanium diaphragm
Reliable fan-cooled power amps with DSP protection
Total of 520W peak dynamic power
DSP control for precise crossover, EQ, and limiting functions
Bluetooth® input is via a dedicated input channel
Mix/Thru Output is via a male XLR jack
Durable plastic injection-molded trapezoidal enclosure
The extra angled section on the right side allows floor monitor use
Pole mount molded-in for 1 3/8" diameter poles
Top and bottom flying point inserts
10" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet
Full-coverage heavy-duty perforated steel grilles with powder coat finish
DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision
Peavey's Quadratic Throat Waveguide™ technology, 100 by 60-degree coverage
Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads
Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input
Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack
Each channel has a level control and a 3-band EQ section to adjust and shape the input signals
Packed Weight: 34.18 lb (15.5 kg)
Packed Length: 22.441" (57 cm)
Packed Width: 15.945" (40.5 cm)
Packed Height: 14.37" (36.5 cm)
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Peavey PVXp 10 10" Bluetooth Powered Loudspeaker
$499.99
$599.99
Peavey PVXp 10-inch 520-watt Powered Speaker with 1" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP
The Peavey PVXp 10 is a Bluetooth Powered Loudspeaker 10-Inch. The PVXp 10 Bluetooth features a reliable bi-amped power section that provides 520 Watts of peak dynamic power with DSP-based compression and limiting. This enclosure features a 10" heavy-duty woofer with a 2 3/8-inch voice coil and 50-ounce magnet and the RX10 compression driver with a 1-inch titanium diaphragm on a 100-degree horizontal x 60-degree vertical pattern asymmetrical horn. The PVXp 10 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4" inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator that can be set to light when power is on and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD and EQ preset and other DSP operating parameters are accessed via a one-knob selector—full-coverage heavy-duty perforated steel grilles with powder coat finish. DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-precision. Peavey's Quadratic Throat Waveguide technology, 100 by 60-degree coverage. The asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads. Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input. Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack. Each channel has a level control and a 3-band EQ section to adjust and shape the input signals.
General Features:
Two-way bi-amped sound reinforcement enclosure
RX™10 compression driver, with 1-inch titanium diaphragm
Reliable fan-cooled power amps with DSP protection
Total of 520W peak dynamic power
DSP control for precise crossover, EQ, and limiting functions
Bluetooth® input is via a dedicated input channel
Mix/Thru Output is via a male XLR jack
Durable plastic injection-molded trapezoidal enclosure
The extra angled section on the right side allows floor monitor use
Pole mount molded-in for 1 3/8" diameter poles
Top and bottom flying point inserts
10" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet
Full-coverage heavy-duty perforated steel grilles with powder coat finish
DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision
Peavey's Quadratic Throat Waveguide™ technology, 100 by 60-degree coverage
Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads
Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input
Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack
Each channel has a level control and a 3-band EQ section to adjust and shape the input signals
Packed Weight: 34.18 lb (15.5 kg)
Packed Length: 22.441" (57 cm)
Packed Width: 15.945" (40.5 cm)
Packed Height: 14.37" (36.5 cm)
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
MR DJ PSE65BT 6.5" Portable Rechargeable Party Speaker USB/FM/LED MP3 Player
$39.99
$79.99
MR DJ USA PSE65BT 6.5" Portable Active Speaker with Rechargeable Battery Party Speaker with Bluetooth 1000 Watts P.M.P.O
6.5" Portable Active Speaker With Rechargeable Battery 1000 Watts P.M.P.O, Built-In Bluetooth Technology, It Can Stream Music From Bluetooth-Enabled Devices, And Through USB, Or Can Be Connected With A Cable Through The Aux-In Port., USB Card Reader, FM Radio, RGB Party Led Lights, Microphone In 1/4” Jack, Aux-In For Allows You To Connect An External Audio Device, Mode Accent Lighting, Led Screen Display, And Metal Grill-Covered Speakers And Equipped With A Handle And Wheels For Easy Transportation. The Speaker Also Has A Microphone Input for Karaoke. The Rechargeable Battery Lasts for Hours, so You Can Stream Music Even In Places Without An Outlet Nearby.
General Features:
Built-in Bluetooth Technology,
1000 Watts P.M.P.O
Multi-color LED lighting
Bluetooth Streaming
USB Port card Reader
FM Tuner Radio
RGB party LED lights with an On/Off Switch
LED Screen Display
Metal Grill-Covered Speakers
Microphone Input
AUX-In
6.5" Woofer
7.4V 1500mAh Rechargeable Battery
Charging Indicator
power supply DC 9V
AC Adapter: 100-240V 60-50Hz
Unit Dimensions: 10.2" x 10.2" x 14.2"
Unit Weight: 6.44 LBS
Shipping Dimension 14.5"x10.5"x 10.5"
Shipping Weight Unit 6.5 lbs.
UPC 847169043321
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 MR DJ PSE65BT 6.5" Portable Speaker with Rechargeable Battery Party Speaker
$69.99
$159.99
2 MR DJ USA PSE65BT 6.5" Portable Active Speaker with Rechargeable Battery Party Speaker with Bluetooth 1000 Watts P.M.P.O
6.5" Portable Active Speaker With Rechargeable Battery 1000 Watts P.M.P.O, Built-In Bluetooth Technology, It Can Stream Music From Bluetooth-Enabled Devices, And Through USB, Or Can Be Connected With A Cable Through The Aux-In Port., USB Card Reader, FM Radio, RGB Party Led Lights, Microphone In 1/4” Jack, Aux-In For Allows You To Connect An External Audio Device, Mode Accent Lighting, Led Screen Display, And Metal Grill-Covered Speakers And Equipped With A Handle And Wheels For Easy Transportation. The Speaker Also Has A Microphone Input for Karaoke. The Rechargeable Battery Lasts for Hours, so You Can Stream Music Even In Places Without An Outlet Nearby.
General Features:
Built-in Bluetooth Technology,
1000 Watts P.M.P.O
Multi-color LED lighting
Bluetooth Streaming
USB Port card Reader
FM Tuner Radio
RGB party LED lights with an On/Off Switch
LED Screen Display
Metal Grill-Covered Speakers
Microphone Input
AUX-In
6.5" Woofer
7.4V 1500mAh Rechargeable Battery
Charging Indicator
power supply DC 9V
AC Adapter: 100-240V 60-50Hz
Unit Dimensions: 10.2" x 10.2" x 14.2"
Unit Weight: 6.44 LBS
Shipping Dimension 14.5"x10.5"x 10.5"
Shipping Weight Unit 6.5 lbs.
UPC 847169043321
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
MR DJ 215BTA+ Dual 15" 5000W Battery Powered Bluetooth Speaker Microphone Party Speaker
$299.99
$599.99
MR DJ USA DJ215BTA+ AFTER PARTY+ Dual 15" 5000W Rechargeable Battery Powered Bluetooth TWS Speaker, Wire Microphone Party Speaker
Affordable Power for Your Act, Band, Or Club, You Won't Believe Your Ears! Not Only Does This Portable PA DJ System Give You Three Ways of Amazing Sound, But It Can Also Be Battery Powered so that You Can Take That Great Sound Anywhere. It even has a built-in EQ to add a professional sheen to your sound. 3-Way Dual 15" Portable Active with Rechargeable Battery Full Range Speaker, 5000 Watts P.M.P.O, Built-In Bluetooth Technology, USB/SD Card Reader, FM Radio, Aux-In Ready, Bass, and Treble EQ, Echo Effect Volume, MP3/Line Out RCA Output, Wired Microphone, LCD MP3 Display with Control Key, Led Light Selector Switch, Included A Remote Control.
General Features:
Dual 15-inch 5000-Watt Max Power 2-Way Speaker with Built-in Bluetooth & Battery/FM Radio/LCD Display/Mp3/USB/SD, Bluetooth Technology
Accent LED Lights and Built-in Rechargeable Battery 12 V 12AH, Supports 32GB USB/ SD Drivers, 1/4" Echo, Bass and Treble control, Mic Inputs, RCA Audio Inputs and Outputs.
Woofer 2 x 15" Voice Coil 25mm Magnet 30 oz., 5000 Watts P.M.P.O, 125 Watts RMSPower, Tweeter 1" Crossover 3Khz/12dB PTC Driver Protect
Product Contents: 1 Portable Active Speaker, 1 Wireless Microphone, 1 Remote Control, and Product Manual, 1 Power Cord
Built-In 12V, 7.5AH Rechargeable Battery
Speaker Can Play For 4-8 Hours Per Charge Depending on Volume Level
Optional External Battery Connection for Extended Play Time
Dual Channel Sound Board
One 1/4" Microphone Jack with Volume and Echo Controls
Sound Activated 7-Color Neon Style LED Lights & Woofer Lights with Dedicated Switch
Built-in wheels and Carry Handles for Easy Transport
Built-in Bluetooth, USB, SD, FM Radio
Built-in RGB LED Lights That Go to The Music with an On/Off Switch
Perfect for House Party’s, Home use, DJ, Tailgating, Camping, And Many Other Applications
¼” Guitar Input with Level Control
3.5mm Aux Input with Level Control
50 Ft. Bluetooth Range
3 Band Graphic Equalizer Built-In
High-quality ABS Enclosure
LED Screen Displays Track Info as Well as Battery Life Indicator
Class D Amplifier Built-In
Volume, Bass, and Treble Controls
5V USB Mobile Charge Port
Remote control
Dimensions 47” X 20” X 19”
Shipping Weight: 55 lbs.
Unit Weight: 45 Lbs.
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
MR DJ DJ215BTA Dual 15" 5000W Power Speaker with Built-In Bluetooth & Battery
$299.99
$599.99
MR DJ DJ215BTA AFTER-PARTY Dual 15" Battery Powered Bluetooth TWS Speaker, Wire Microphone Party Speaker
Affordable Power for Your Act, Band, Or Club, You Won't Believe Your Ears! Not Only Does This Portable PA DJ System Give You Three Ways of Amazing Sound, But It Can Also Be Battery Powered, So You Can Take That Great Sound Anywhere. It has Even Got Built-In EQ Right on Board, So You Can Add A Professional Sheen to Your Sound. 3-Way Dual 15" Portable Active with Rechargeable Battery Full Range Speaker, 5000 Watts P.M.P.O, Built-In Bluetooth Technology, USB/SD Card Reader, FM Radio, Aux-In Ready, Bass, and Treble EQ, Echo Effect Volume, MP3/Line Out RCA Output, Wired Microphone, LCD MP3 Display with Control Key, Led Light Selector Switch, Included A Remote Control.
General Features:
Dual 15-inch 5000-Watt Max Power 2-Way Speaker with Built-in Bluetooth & Battery/FM Radio/LCD Display/Mp3/USB/SD, Bluetooth Technology
Accent LED Lights and Built-in Rechargeable Battery 12 V 12AH, Supports 32GB USB/ SD Drivers, 1/4" Echo, Bass and Treble control, Mic Inputs, RCA Audio Inputs and Outputs
Woofer 2 x 15" Voice Coil 25mm Magnet 30 oz., 5000 Watts P.M.P.O, 125 Watts RMSPower, Tweeter 1" Crossover 3Khz/12dB PTC Driver Protect
Product Contents 1 Portable Active Speaker, 1 Wireless Microphone, 1 Remote Control, and Product Manual, 1 Power Cord
Built-In 12V, 7.5AH Rechargeable Battery
Speaker Can Play For 4-8 Hours Per Charge Depending on Volume Level
Optional External Battery Connection for Extended Play Time
UHF Wireless Microphone
Dual Channel Sound Board
One 1/4" Microphone Jack with Volume and Echo Controls
Sound Activated 7-Color Neon Style LED Lights & Woofer Lights with Dedicated Switch
Built-in wheels and Carry Handles for Easy Transport
Built-in Bluetooth, USB, SD, FM Radio
Built-in RGB LED Lights That Go to The Music with an On/Off Switch
Perfect for House Party’s, Home use, DJ, Tailgating, Camping, And Many Other Applications
¼” Guitar Input with Level Control
3.5mm Aux Input with Level Control
50 Ft. Bluetooth Range
3 Band Graphic Equalizer Built-In
High-quality ABS Enclosure
LED Screen Displays Track Info as Well as Battery Life Indicator
Class D Amplifier Built-In
Volume, Bass, and Treble Controls
5V USB Mobile Charge Port
Remote control
Dimensions 47” X 20” X 19”
Shipping Weight: 50 lbs.
Unit Weight: 45 Lbs.
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Mackie Thump212XT 12" 1400W Enhanced Active Powered Loudspeaker
$449.99
$899.99
Mackie Thump212XT 12-inch 1400W Enhanced Powered Loudspeaker
Mackie Thump212XT 12-Inch 1400-Watt Enhanced Active Powered Speaker
Enhance your next set with Thump212XT, the next evolution of our full-featured Thump Series powered loudspeakers. Packed with more time-saving features than ever, tons of power, and an all-new cabinet, Thump212XT is the ultimate loudspeaker for DJs, bands, and clubs that need pro sound without the insane price tag.
Four voicing modes and Bluetooth compatibility
No matter your live sound environment, the Thump 212XT’s four application-specific voicing modes have you covered! Music, Live, Club, and Monitor modes optimize your system to excel in any venue, and there’s even an Indoor/Outdoor mode setting if you’re looking to take your band’s sound to an outside gig. Suppose you’re after even greater sonic control. In that case, the Thump212XT’s Bluetooth connectivity allows you to stream, link speakers, and access additional sound-shaping features like system EQ, levels, mutes, and much more via the Thump Connect 2 app.
General Features:
1400W ultra-efficient Class-D amplifier
Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading
Frequency response: 47 Hz – 20kHz
Max SPL: 128 dB
12” high-performance woofer
1” compression driver
4 Application-specific voicing modes
Music
Live
Club
Monitor
Outdoor mode optimizes voicing for open-air venues
Bluetooth connectivity for streaming, speaker linking, and control
Download the Thump Connect 2 app for complete wireless control
Link 2 ThumpXT loudspeakers for a powerful, wireless music playback system in both stereo and dual-zone configuration
Flexible I/O
ch.1 features an XLR/TRS input that accepts mic or line signals
ch.2 features an XLR/TRS line input plus stereo 1/8” input
The output contains audio from both input channels
Built-in Feedback Eliminator reduces squeals and out of control rumble
Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives a signal
Front LED On/Off switch
Universal Power Supply (100-240VAC)
Standard pole mount
M10 fly points for permanent install
Monitor wedge provides an optimal angle for use as a floor monitor
Weight: 29.3 lb / 13.3 kg
Dimensions: 24.2 x 14.1 x 14 in / 615 x 358 x 356 mm
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Mackie Thump215XT 15" Advanced Powered PA Speaker with Bluetooth
$499.99
$999.99
2 Mackie Thump215XT 1400W Boosted 15" Powered Speaker 2-Way with 3-channel Digital Mixer & MR DJ 6' XLR Cables and Mobile Phone Holder
Mackie Thump215XT 1400W 15" Powered PA Loudspeaker System with DSP and Bluetooth
Enhance your next set with Thump215XT, the next evolution of our full-featured Thump Series powered loudspeakers. Packed with more time-saving features than ever, tons of power, and an all-new cabinet, Thump215XT is the ultimate loudspeaker for DJs, bands, and clubs that need pro sound without the insane price tag.
Four voicing modes and Bluetooth compatibility
No matter your live sound environment, the Thump 212XT’s four application-specific voicing modes have you covered! Music, Live, Club, and Monitor modes optimize your system to excel in any venue, and there’s even an Indoor/Outdoor mode setting if you’re looking to take your band’s sound to an outside gig. Suppose you’re after even greater sonic control. In that case, the Thump212XT’s Bluetooth connectivity allows you to stream, link speakers, and access additional sound-shaping features like system EQ, levels, mutes, and much more via the Thump Connect 2 app.
General Features:
1400W ultra-efficient Class-D amplifier
Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading
Frequency response: 47 Hz – 20kHz
Max SPL: 128 dB
15” high-performance woofer
1” compression driver
4 Application-specific voicing modes
Music
Live
Club
Monitor
Outdoor mode optimizes voicing for open-air venues
Bluetooth connectivity for streaming, speaker linking, and control
Download the Thump Connect 2 app for complete wireless control
Link 2 ThumpXT loudspeakers for a powerful, wireless music playback system in both stereo and dual-zone configuration
Flexible I/O
ch.1 features an XLR/TRS input that accepts mic or line signals
ch.2 features an XLR/TRS line input plus stereo 1/8” input
The output contains audio from both input channels
Built-in Feedback Eliminator reduces squeals and out of control rumble
Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives a signal
Front LED On/Off switch
Universal Power Supply (100-240VAC)
Standard pole mount
M10 fly points for permanent install
The monitor wedge provides an optimal angle for use as a floor monitor.
Powered: Yes
Channels:2-channel mixer
LF Driver Size:15" high-performance woofer
HF Driver Size:1" compression driver
Total Power:1400W
Inputs:2 x XLR-1/4" combo, 1 x 1/8" TRS
Outputs:1 x 1/4"
Bluetooth: Yes
Wireless: Bluetooth
Frequency Response:40Hz-20kHz
Maximum Peak SPL:129dB SPL
Software: Thump Connect 2 App
Mounting Options: Pole Mount, Floor Wedge, M10 fly points
Power Source: Standard IEC AC cable
Weight: 35.1 lb / 15.9 kg
Dimensions: 27 x 17.4 x 14 in / 686 x 442 x 356 mm
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Mackie Thump215XT 1300W 15" Powered Speaker 3-channel Digital Mixer & Stand & cable
$1,049.98
$2,100.00
2 Mackie Thump215XT 1400W Boosted 15" Powered Speaker 2-Way with 3-channel Digital Mixer & 2 MR DJ 6' XLR Cables and 2 Speaker Stands with Cover
Mackie Thump215XT 1400W 15" Powered PA Loudspeaker System with DSP and Bluetooth
Enhance your next set with Thump215XT, the next evolution of our full-featured Thump Series powered loudspeakers. Packed with more time-saving features than ever, tons of power, and an all-new cabinet, Thump215XT is the ultimate loudspeaker for DJs, bands, and clubs that need pro sound without the insane price tag.
Four voicing modes and Bluetooth compatibility
No matter your live sound environment, the Thump 212XT’s four application-specific voicing modes have you covered! Music, Live, Club, and Monitor modes optimize your system to excel in any venue, and there’s even an Indoor/Outdoor mode setting if you’re looking to take your band’s sound to an outside gig. Suppose you’re after even greater sonic control. In that case, the Thump212XT’s Bluetooth connectivity allows you to stream, link speakers, and access additional sound-shaping features like system EQ, levels, mutes, and much more via the Thump Connect 2 app.
General Features:
1400W ultra-efficient Class-D amplifier
Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading
Frequency response: 47 Hz – 20kHz
Max SPL: 128 dB
15” high-performance woofer
1” compression driver
4 Application-specific voicing modes
Music
Live
Club
Monitor
Outdoor mode optimizes voicing for open-air venues
Bluetooth connectivity for streaming, speaker linking, and control
Download the Thump Connect 2 app for complete wireless control
Link 2 ThumpXT loudspeakers for a powerful, wireless music playback system in both stereo and dual-zone configuration
Flexible I/O
ch.1 features an XLR/TRS input that accepts mic or line signals
ch.2 features an XLR/TRS line input plus stereo 1/8” input
The output contains audio from both input channels
Built-in Feedback Eliminator reduces squeals and out of control rumble
Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives a signal
Front LED On/Off switch
Universal Power Supply (100-240VAC)
Standard pole mount
M10 fly points for permanent install
The monitor wedge provides an optimal angle for use as a floor monitor.
Powered: Yes
Channels:2-channel mixer
LF Driver Size:15" high-performance woofer
HF Driver Size:1" compression driver
Total Power:1400W
Inputs:2 x XLR-1/4" combo, 1 x 1/8" TRS
Outputs:1 x 1/4"
Bluetooth: Yes
Wireless: Bluetooth
Frequency Response:40Hz-20kHz
Maximum Peak SPL:129dB SPL
Software: Thump Connect 2 App
Mounting Options: Pole Mount, Floor Wedge, M10 fly points
Power Source: Standard IEC AC cable
Weight: 35.1 lb / 15.9 kg
Dimensions: 27 x 17.4 x 14 in / 686 x 442 x 356 mm
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Mackie Thump215XT 15" Advanced Power Loudspeaker + 2 MR DJ Cables + Absolute Mobile Phone Holder
$999.98
$1,900.00
2 Mackie Thump215XT 1400W Boosted 15" Powered Speaker 2-Way with 3-channel Digital Mixer & MR DJ 6' XLR Cables and Mobile Phone Holder
Mackie Thump215XT 1400W 15" Powered PA Loudspeaker System with DSP and Bluetooth
Enhance your next set with Thump215XT, the next evolution of our full-featured Thump Series powered loudspeakers. Packed with more time-saving features than ever, tons of power, and an all-new cabinet, Thump215XT is the ultimate loudspeaker for DJs, bands, and clubs that need pro sound without the insane price tag.
Four voicing modes and Bluetooth compatibility
No matter your live sound environment, the Thump 212XT’s four application-specific voicing modes have you covered! Music, Live, Club, and Monitor modes optimize your system to excel in any venue, and there’s even an Indoor/Outdoor mode setting if you’re looking to take your band’s sound to an outside gig. Suppose you’re after even greater sonic control. In that case, the Thump212XT’s Bluetooth connectivity allows you to stream, link speakers, and access additional sound-shaping features like system EQ, levels, mutes, and much more via the Thump Connect 2 app.
General Features:
1400W ultra-efficient Class-D amplifier
Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading
Frequency response: 47 Hz – 20kHz
Max SPL: 128 dB
15” high-performance woofer
1” compression driver
4 Application-specific voicing modes
Music
Live
Club
Monitor
Outdoor mode optimizes voicing for open-air venues
Bluetooth connectivity for streaming, speaker linking, and control
Download the Thump Connect 2 app for complete wireless control
Link 2 ThumpXT loudspeakers for a powerful, wireless music playback system in both stereo and dual-zone configuration
Flexible I/O
ch.1 features an XLR/TRS input that accepts mic or line signals
ch.2 features an XLR/TRS line input plus stereo 1/8” input
The output contains audio from both input channels
Built-in Feedback Eliminator reduces squeals and out of control rumble
Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives a signal
Front LED On/Off switch
Universal Power Supply (100-240VAC)
Standard pole mount
M10 fly points for permanent install
The monitor wedge provides an optimal angle for use as a floor monitor.
Powered: Yes
Channels:2-channel mixer
LF Driver Size:15" high-performance woofer
HF Driver Size:1" compression driver
Total Power:1400W
Inputs:2 x XLR-1/4" combo, 1 x 1/8" TRS
Outputs:1 x 1/4"
Bluetooth: Yes
Wireless: Bluetooth
Frequency Response:40Hz-20kHz
Maximum Peak SPL:129dB SPL
Software: Thump Connect 2 App
Mounting Options: Pole Mount, Floor Wedge, M10 fly points
Power Source: Standard IEC AC cable
Weight: 35.1 lb / 15.9 kg
Dimensions: 27 x 17.4 x 14 in / 686 x 442 x 356 mm
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.