All Marine products (30)

Soundstream SM4.1000D Conformal Coated Micro 1000W 4Ch. Amplifier (Boating, Off-Road) Don’t let these little monsters fool you. The latest and greatest class D full range technology allows us to pack 10 pounds of KICK YOUR ASS in less than 2-pound chassis. Once regarded as “dirty power,” class D’s stable performance, thanks to high power capability, maximum efficiencies, and low tolerance components, rivals traditional full-range applications. Minimal power requirements, ultra-micro footprint, unbelievable sound quality, and easy install make Marine Stealth amplifiers great for any car, motorcycle, boat, or off-road vehicle… General Feature Hybrid Aluminum Alloy Heatsink for Optimum Dissipation 2-ohm Stereo & 4-ohm Bridged Full Range Operation 2-ohm Minimum Impedance Monoblock Operation MOSFET Power Supply w/ Audiophile Grade IRTM Transistors Military Grade SMT PCB Maintains Dynamic Performance Direct Short, Thermal, & Overload Circuits Protect Amplifier 200mV-12V High Level or Low-Level RCA Input Quick Disconnect RCA/High-Level Wire Harness Quick Disconnect Power and Speaker Output Harness Variable 12dB High Pass, Low Pass, & Subsonic Crossovers SM4.1000D Amplifier Stealth Water-Resistant Amplifier RMS Power 4Ω 90W x 4 RMS Power 2Ω 125W x 4 RMS Bridged 4Ω 250W x 2   ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

Soundstream WTS-6W Pair (2) Water-Resistant Gloss White 6.5” Wake Tower Speakers WTS Wake Tower Speakers offer maximum performance in the open-air environment of any boat or off-road vehicle. Considering extreme outdoor conditions, WTS systems use the best materials to defend against the potentially damaging effects of water and UV sunlight and impact resistance. Each WTS enclosure is pre-wired for the optional LED rings and spotlight, making future add-ons simple. Additional options for WTS enclosures include bright white or RGB LED grill rings and a rear-mounted high-intensity LED spotlight. Immediately available WTS sets include 6.5” & 8” coaxial, in brilliant gloss white and black. Available now in time for the 2020 boat/UTV season, an additional 8” coaxial set will feature a high-efficiency horn-loaded compression tweeter and midrange driver.  Whatever your application, WTS speaker systems are guaranteed to carry your tunes across any lake, river, or desert. Enclosure Construction WTS enclosure construction begins with Centrex, a material made in the USA that offers incredible advantages to traditional polymer materials. Centrex is resilient to extreme temperatures, chemicals, & weathering while maintaining impervious structural density. WTS enclosures resist harmful sunlight from deteriorating their brilliant coloring thanks to a UV inhibitor blended with the raw Centrex material. Following the concept of superior materials, WTS mounting clamps are cast aluminum, with adjustment to 2.5” diameter, and can rotate 360 degrees. Included rubber inserts accommodate installation to most round or oval watercraft wake towers and off-road vehicle roll cages. All speakers, LED rings, and LED spotlight pre-wire pass through the mounting bracket center, keeping all wiring in a dry environment. Speaker Characteristics Coaxial speakers of WTS use waterproof materials, including blended polypropylene-mica cones, titanium dome tweeter, and rubber gaskets around the tweeter bridge. A neoprene gasket under the speaker frame prevents moisture from entering the enclosure, eliminating the possibility of electrical shorting. Color-matching grills made of Centrex and a stainless steel mesh over the tweeter prevent harmful damage by rogue debris. General Features: 6-1/2" 2-way marine tower speakers (pair) injection-molded polypropylene-mica composite cone durable rubber surround 1" titanium dome tweeter rugged Centrex basket and grille Stainless steel mounting brackets fit bars up to 2-1/2" handles up to 150 watts RMS (300 watts peak power) sensitivity: 89.3 dB dimensions: 7" x 9-1/2" Warranty: 2 years What's in the WTS-6W package: Warranty registration sheet 2 Wake tower speakers (white) attached mounting brackets 4 Rubber mount-gaskets 16 Crimp connectors (18 ga.) 5mm Allen key 2 Nylon carry-bags Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate PMX-5CAN Punch Marine AM/FM/WB Digital Media Receiver 2.7" Display w/CANbus The PMX-5CAN features a 2.7" full-color TFT display for optimum viewing - even in full sun - that is optically wet bonded to prevent any dust or moisture penetration. It is IPX6 rated and uses a water-resistant rotary encoder knob with white LED button illumination and front-mounted sub-level controls. Additionally, with features such as SiriusXM and Pandora capabilities, Bluetooth audio steaming with album art support for Apple and Android products, and true 2 zone/2 source control, this unit becomes a true command center of any system.Output flexibility comes from a 4x50W @ 2ohm internal amplifier or dual-zone output RCA's allowing the addition of aftermarket amplifiers for more power and output. Add in the EEPROM memory system, custom GUI interface, and wired remote expansion capabilities and you have the only media receiver you'll ever need. The PMX-5CAN also features CANbus functionality for connection to Raymarine MFD (Multi-Function Display) systems using the PMX-CAN adaptor (see Accessories tab.) General Features: ISO8846/SAE J1171 Ignition Protection Certified Stainless Steel Rear Chassis Steering Wheel Control Interface Compatible Pandora Internet Radio SiriusXM-Ready™ A2DP and AVRCP Bluetooth Wireless Streaming FCC, CE, IC, and C-Tick Certified Multi-Region Radio Frequencies Low Voltage Warning Alert AUX and USB Inputs with USB Charging On-Board Punch EQ Control Independent Subwoofer Level Control Selectable HP / LP / AP Crossovers with Selectable Slope 12 / 24 dB/Oct IPX6 Marine Grade for prevention of water intrusion 7-Band Graphic EQ 2.7" full-color display w/ auto-dimming backlighting Zone Control: 2 Zone / 2 Source (F/R/S + F) AM / FM / WB Tuner CANbus (Controller Area Network) compatible. Requires PMX-CAN accessory Compatible with a Multi-Function Display using NMEA2K entertainment standard. See our MFD Compatibility Chart *Antenna not included 2-Year Warranty ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Rockford Fosgate PM100X1K Punch Marine 100 Watt Full-Range Mono Amplifier (Pair) The Punch Marine PM100X1 is a pair of 100-Watt full range dynamic power mono amplifiers that don’t need a power wire, is extremely compact in size, but big on power! The PM100X1 uses our patent-pending BTL technology that utilizes the speaker output of the radio to not only provide the audio signal it needs, but also the power that runs the unit. With no more load to the radio than a standard 2 or 4-ohm speaker, this design allows the amp to be connected to a 20-Watt output radio and produce up to 100 Watts dynamically! The small footprint of the PM100X1K amplifier allows it to be installed virtually anywhere along the speaker signal pathway from behind the radio to the door itself. This design makes the amplifier ideal for OEM or aftermarket as they can be hidden in the dash or doors of the vehicle. It is also IP67 water intrusion rated so it is also built to withstand the elements in motorcycle, boat, and motorsport applications. General Features: two compact mono amplifiers 60 watts RMS x 1 at 4 ohms (100 watts RMS x 1 at 2 ohms) CEA-2006 compliant patent-pending BTL "Freeload" technology requires no separate positive power lead connects to speaker wiring and chassis ground selectable high-pass filter (60, 80, or 100 Hz at 12 dB/octave) input impedance switch for low-impedance-capable receivers rubber switch cover IPX6 water intrusion rated dimensions: 3"W x 1-5/16"H x 3-15/16"D warranty: 2 years Patented BTL powered "Freeload" Technology Uses Stored Energy from BTL Amplifier to Produce Dynamic Power of Over 100 Watts High Level Turn On Pig Tail Connectivity for Easy Installation Sold in pairs (left/right) Harvests both B+ and Audio Signal from Standard Head Unit Speaker Outputs Optional B+ Connection for Non-Standard Speaker Outputs Short Circuit & Over Voltage Protection Extruded Aluminum Heat Sink and Thermal Protection Discrete surface mount technology Small Stealth Package that Allows for Anywhere Installation Selectable 4 and 2 Ohm Play Current Limited to Protect Head Unit for Both 4 Ohm and 2 Ohm Configurations Muted turn-on. The PM100X1K is a pair (left/right) of 100-Watt dynamic power mono amplifiers using DC and AC voltages present on existing radio speaker outputs This compact amplifier (1.3” x 3.0” x 3.9) is small but big on power (RMS Power Output: 60 x 1 @ 4-Ohm or 100 x 1 @ 2-Ohm) The versatile design can be used on a factory system using 2-Ohm or 4-Ohm factory or aftermarket speakers. The PM100X1K is also IPX6 rated so it can withstand the elements in mobile, motorsport, and marine applications High Level Turn on with selectable 60, 80, and 100 Hz Selectable 12dB/Oct HP Butterworth Crossover, featuring pigtail connectivity in a small stealth package allows for easy anywhere installation Famous Rockford Fosgate build quality ensures it will handle everything you throw at it! Full 2-year parts and labor warranty when purchased from an authorized Rockford Fosgate reseller What is in the box: The PM100X1K package contains two separately boxed PM100x1 mono amplifiers. Each amplifier box includes: Mono amplifier with attached 7.75" pigtail 12" Input/Output/Ground harness (16 AWG wires) 12" Power wire (16 AWG) 2 Self-tapping screws (3/4" length) Certificate of Performance Verification Rockford Fosgate PM100X1 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate M2-500X1 Monoblock Marine Amplifier with Absolute KIT4 4 Gauge Amp Kit Rockford Fosgate M2-500X1 500 Watt Monoblock marine amplifierDesigned to withstand the elements, the M2-500X1 Element Ready™ amplifier is a 500 watt, class-D model, capable of operating at 4Ω or 2Ω mono. This amplifier is extremely efficient because of its class D technology which reduces demand on the electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. For subwoofers, a variable infrasonic filter and remote level control allow you to tune the bass for the desired level for the music. General Features: Element Ready™ design protects against outdoor exposure Conformal coated circuit board protects against dust and water UV stable powder-coated cast aluminum heatsink Zinc Nickel-plated Marine grade brass connection terminals C.L.E.A.N. input/output clip detection and indicator LEDs MEHSA 4 (Maximum Efficiency Heat Sink Application) NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances. Optimized using AudioGraph PowerCube measurement tool Continuously Variable On Board Punch EQ Includes RLC Remote Level Control Focused mass heatsink design Top Mounted Control Panel Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers Short Circuit & Over Current Protection Variable Infrasonic Filter Integrated Power and Speaker Terminals Balanced Differential Inputs via Speaker Line or RCA Inputs RCA pass-thru outputs Integration with OEM and Aftermarket Radios "Auto-Sense" turn-on with remote out (high level in) Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power) Low Impedance Stability Proprietary testing using RATS (Rockford Automated Testing System) CEA-2006 Compliant & CE Compliant Rollback Protection Power Ratings: 300 Watts x 1 @ 4 ohms Power Ratings: 500 Watts x 1 @ 2 ohms Dynamic Power Ratings: 350 Watts x 1 @ 4 ohms Dynamic Power Ratings: 590 Watts x 1 @ 2 ohms Frequency Response: 20 Hz - 250 Hz Low-Level Input Sensitivity: 150 mV - 4 V High-Level Input Sensitivity: 450 mV - 12 V Total Harmonic Distortion (THD+Noise): <1.0% Low-Level Signal Input: 2 RCA High-Level Input Signal: 4-Pin Molex Low-Level Signal Output: 2 RCA (Pass-Thru active with RCA or Hi-Level input) Tone-Controls: 0 to +18 dB @ 45 Hz Low-Pass Crossover Controls: 50 Hz - 250 Hz @ 12dB/Octave Butterworth Infrasonic Crossover Controls: 15 Hz - 40 Hz @ 12dB/Octave Butterworth 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Dimensions: 1.9"W x 6.8"D x 8.5"H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca