All Loaded Subwoofer Enclosures Boxes (53)

Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area. General Features: 12" Punch Series Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Proprietary woofer optimized by Rockford Fosgate for this enclosure CEA-2031 Compliant Klippel Verified Proprietary spider venting/cooling technique StampCast basket with integrated spider venting High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Frequency response: 35-150 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty Enclosure General Features: Rockford Fosgate Sealed Enclosure "Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure Universal vehicle fitment 5/8" MDF Box material Covered with industrial heat-activated vinyl Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H Weight: 29.6 Lbs. (approx) Amplifier General Features: 300 Watt Class-D monoblock CEA-2006 Compliant Remote bass level control included Intelligent auto turn on/off function Gain and bass boost control Built-in adjustable bass boost EQ Built-in 0°/180° phase switch Variable 50Hz to 200Hz @ 12dB/Octave Butterworth Removable Connector Power/Ground/Remote Thermal and over-voltage protection High-efficiency, low current design Low-Level & High-Level Inputs Low-Level: 1 RCA Pair High-Level: Left/Right Summed Inputs What is in the box: Rockford Fosgate Punch P300-12 owner's manual Subwoofer enclosure loaded with one 12" woofer and built-in amplifier Four 10 amp ATO fuses (two installed in enclosure/ two spare) Removable power plug 10" Signal input harness 3mm Allen wrench Remote Punch Level Control Metal mounting bracket (for Punch Level Control) 17.5' Punch Level Control cable (3.5mm plug on both ends) Two 3/8" Punch Level Control mounting screws Hook and Loop mounting straps Installation and Operation manual (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included + Blue Amp Kit The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area. General Features: 12" Punch Series Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Proprietary woofer optimized by Rockford Fosgate for this enclosure CEA-2031 Compliant Klippel Verified Proprietary spider venting/cooling technique StampCast basket with integrated spider venting High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Frequency response: 35-150 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty Enclosure General Features: Rockford Fosgate Sealed Enclosure "Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure Universal vehicle fitment 5/8" MDF Box material Covered with industrial heat-activated vinyl Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H Weight: 29.6 Lbs. (approx) Amplifier General Features: 300 Watt Class-D monoblock CEA-2006 Compliant Remote bass level control included Intelligent auto turn on/off function Gain and bass boost control Built-in adjustable bass boost EQ Built-in 0°/180° phase switch Variable 50Hz to 200Hz @ 12dB/Octave Butterworth Removable Connector Power/Ground/Remote Thermal and over-voltage protection High-efficiency, low current design Low-Level & High-Level Inputs Low-Level: 1 RCA Pair High-Level: Left/Right Summed Inputs What is in the box: Rockford Fosgate Punch P300-12 owner's manual Subwoofer enclosure loaded with one 12" woofer and built-in amplifier Four 10 amp ATO fuses (two installed in enclosure/ two spare) Removable power plug 10" Signal input harness 3mm Allen wrench Remote Punch Level Control Metal mounting bracket (for Punch Level Control) 17.5' Punch Level Control cable (3.5mm plug on both ends) Two 3/8" Punch Level Control mounting screws Hook and Loop mounting straps Installation and Operation manual (English/ French/ Spanish/ German/ Italian) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area. General Features: 12" Punch Series Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Proprietary woofer optimized by Rockford Fosgate for this enclosure CEA-2031 Compliant Klippel Verified Proprietary spider venting/cooling technique StampCast basket with integrated spider venting High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Frequency response: 35-150 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty Enclosure General Features: Rockford Fosgate Sealed Enclosure "Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure Universal vehicle fitment 5/8" MDF Box material Covered with industrial heat-activated vinyl Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H Weight: 29.6 Lbs. (approx) Amplifier General Features: 300 Watt Class-D monoblock CEA-2006 Compliant Remote bass level control included Intelligent auto turn on/off function Gain and bass boost control Built-in adjustable bass boost EQ Built-in 0°/180° phase switch Variable 50Hz to 200Hz @ 12dB/Octave Butterworth Removable Connector Power/Ground/Remote Thermal and over-voltage protection High-efficiency, low current design Low-Level & High-Level Inputs Low-Level: 1 RCA Pair High-Level: Left/Right Summed Inputs What is in the box: Rockford Fosgate Punch P300-12 owner's manual Subwoofer enclosure loaded with one 12" woofer and built-in amplifier Four 10 amp ATO fuses (two installed in enclosure/ two spare) Removable power plug 10" Signal input harness 3mm Allen wrench Remote Punch Level Control Metal mounting bracket (for Punch Level Control) 17.5' Punch Level Control cable (3.5mm plug on both ends) Two 3/8" Punch Level Control mounting screws Hook and Loop mounting straps Installation and Operation manual (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area. General Features: 12" Punch Series Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Proprietary woofer optimized by Rockford Fosgate for this enclosure CEA-2031 Compliant Klippel Verified Proprietary spider venting/cooling technique StampCast basket with integrated spider venting High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Frequency response: 35-150 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty Enclosure General Features: Rockford Fosgate Sealed Enclosure "Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure Universal vehicle fitment 5/8" MDF Box material Covered with industrial heat-activated vinyl Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H Weight: 29.6 Lbs. (approx) Amplifier General Features: 300 Watt Class-D monoblock CEA-2006 Compliant Remote bass level control included Intelligent auto turn on/off function Gain and bass boost control Built-in adjustable bass boost EQ Built-in 0°/180° phase switch Variable 50Hz to 200Hz @ 12dB/Octave Butterworth Removable Connector Power/Ground/Remote Thermal and over-voltage protection High-efficiency, low current design Low-Level & High-Level Inputs Low-Level: 1 RCA Pair High-Level: Left/Right Summed Inputs What is in the box: Rockford Fosgate Punch P300-12 owner's manual Subwoofer enclosure loaded with one 12" woofer and built-in amplifier Four 10 amp ATO fuses (two installed in enclosure/ two spare) Removable power plug 10" Signal input harness 3mm Allen wrench Remote Punch Level Control Metal mounting bracket (for Punch Level Control) 17.5' Punch Level Control cable (3.5mm plug on both ends) Two 3/8" Punch Level Control mounting screws Hook and Loop mounting straps Installation and Operation manual (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

2 Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area. General Features: 12" Punch Series Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Proprietary woofer optimized by Rockford Fosgate for this enclosure CEA-2031 Compliant Klippel Verified Proprietary spider venting/cooling technique StampCast basket with integrated spider venting High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Frequency response: 35-150 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty Enclosure General Features: Rockford Fosgate Sealed Enclosure "Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure Universal vehicle fitment 5/8" MDF Box material Covered with industrial heat-activated vinyl Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H Weight: 29.6 Lbs. (approx) Amplifier General Features: 300 Watt Class-D monoblock CEA-2006 Compliant Remote bass level control included Intelligent auto turn on/off function Gain and bass boost control Built-in adjustable bass boost EQ Built-in 0°/180° phase switch Variable 50Hz to 200Hz @ 12dB/Octave Butterworth Removable Connector Power/Ground/Remote Thermal and over-voltage protection High-efficiency, low current design Low-Level & High-Level Inputs Low-Level: 1 RCA Pair High-Level: Left/Right Summed Inputs What is in the box: Rockford Fosgate Punch P300-12 owner's manual Subwoofer enclosure loaded with one 12" woofer and built-in amplifier Four 10 amp ATO fuses (two installed in enclosure/ two spare) Removable power plug 10" Signal input harness 3mm Allen wrench Remote Punch Level Control Metal mounting bracket (for Punch Level Control) 17.5' Punch Level Control cable (3.5mm plug on both ends) Two 3/8" Punch Level Control mounting screws Hook and Loop mounting straps Installation and Operation manual (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included + Red Amp Kit The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area. General Features: 12" Punch Series Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Proprietary woofer optimized by Rockford Fosgate for this enclosure CEA-2031 Compliant Klippel Verified Proprietary spider venting/cooling technique StampCast basket with integrated spider venting High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Frequency response: 35-150 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty Enclosure General Features: Rockford Fosgate Sealed Enclosure "Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure Universal vehicle fitment 5/8" MDF Box material Covered with industrial heat-activated vinyl Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H Weight: 29.6 Lbs. (approx) Amplifier General Features: 300 Watt Class-D monoblock CEA-2006 Compliant Remote bass level control included Intelligent auto turn on/off function Gain and bass boost control Built-in adjustable bass boost EQ Built-in 0°/180° phase switch Variable 50Hz to 200Hz @ 12dB/Octave Butterworth Removable Connector Power/Ground/Remote Thermal and over-voltage protection High-efficiency, low current design Low-Level & High-Level Inputs Low-Level: 1 RCA Pair High-Level: Left/Right Summed Inputs What is in the box: Rockford Fosgate Punch P300-12 owner's manual Subwoofer enclosure loaded with one 12" woofer and built-in amplifier Four 10 amp ATO fuses (two installed in enclosure/ two spare) Removable power plug 10" Signal input harness 3mm Allen wrench Remote Punch Level Control Metal mounting bracket (for Punch Level Control) 17.5' Punch Level Control cable (3.5mm plug on both ends) Two 3/8" Punch Level Control mounting screws Hook and Loop mounting straps Installation and Operation manual (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate Punch P300-8P 300 Watts RMS, Loaded 10" Powered Sealed Subwoofer Enclosure The P300-8P powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features an 8” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-8P is the right one for the job! The P300-10 features a Punch 8” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area. General Features: High-Efficiency, Low Current Amplifier Design Optimized 8" Low Impedance Woofer 300 Watt Class-D Amplifier with Optimized "Closed Loop" Design Adjustable 12db/Octave low pass crossover On-Board Phase Switch Intelligent auto turn on/off function Robust Power/Ground connections Quick Input Connections for Easy Removal On-Board Adjustable Bass EQ Remote bass level control included Separate low level and speaker level inputs Precision Constructed MDF Enclosure with Heat Activated Vinyl Finish Thermal and over/under voltage protection Slim Design For Truck Applications CEA-2031 Compliant CEA-2006 Compliant Frequency Response: 30Hz-200Hz Power Handling (RMS): 300W Enclosure Type: Vented Crossover Controls: Variable 50Hz-200Hz, 12dB/Octave Butterworth Tone Controls: Bass Boost 0dB-+12dB Phase Control: 0-180 Input Impedance: 20k Ohms What is in the box: Rockford Fosgate P300-8P owner's manual Powered subwoofer enclosure Remote Punch Level Control (w/ mounting plate and 2 screws) 16.5' Remote cable (3.5mm stereo plugs on both ends) Power/ground terminal block 12" Input harness (4-pin Molex - RCA) 25" Strip of hook-and-loop fastener 3mm Allen key Four 10A ATO fuses (two installed / two spare) Installation manual ⚠️Warning: Cancer and Reproductive Harm-Www.P65warnings.Ca. Gov