00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R2-W12D2 Car Subwoofer 2250W 12" R-Series Dual 2-Ohm Car Subwoofer
$721.90
$999.90
2 Alpine R2-W12D2 2250W Max (750W RMS) 12" R-Series Dual 2-Ohm Car Subwoofer
The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response.
General Features:
12" Dual 2 ohm Type-R Subwoofer
Peak Power Handling: 2250watts
RMS Power Handling: 750 watts
Recommended power range: 300 - 750W RMS
CTA-2031 compliant power ratings
Parabolic pulp/kevlar cone
H.A.M.R. surround
Polypropylene, mica, and talc dust cap
Reinforced cone neck and spider joint
Cast aluminum frame with integral shorting sleeve
8AWG push terminals with VC configuration jumpers
2.6" High excursion overhung voice coil
127 oz. Strontium ferrite segmented magnet
Top-mount depth: 6-3/8"
Cutout diameter: 10-7/8"
Frequency Response: 24 - 200Hz
Sensitivity: 84.3dB
Resonance Frequency (Fs): 27Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the R2-W12D2 package:
R2-W12D2 owner's manual
One 12" Dual 2-ohm voice coil subwoofer
Two 3" jumper cables
R-Series Subwoofer Application Guide
Online product registration information
Warranty Information
https://www.youtube.com/watch?v=ihjWBSOYVxE&t=179s
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine PWE-S8-WRA Compact powered subwoofer 8" Amplified Custom Fit for 2011-up Jeep Wrangler 4 door
$549.95
$850.00
Alpine PWE-S8-WRA 8" Amplified Custom Fit for 2011-up Jeep Wrangler (4 doors) - Under Seat Plug and Play 120 Watt Amplified Subwoofer
DISCREET, WITH A PUNCH
The small but powerful PWE-S8-WRA consists of an 8-inch powered subwoofer with a built-in 120 watts amp, a bracket designed to bolt the subwoofer under the Wrangler driver’s seat, a remote bass knob and Wrangler-specific wiring harnesses for plug-and-play connection to your aftermarket or factory in-dash system. The powered subwoofer measures just 13.5” L x 9” W x 3” D, so you can add low, punchy, accurate bass to your Jeep without taking up usable storage space.
SOUND CONTROL AT YOUR FINGERTIPS
Subwoofer controls like Phase, Gain, LP Crossover, and Remote Sub Level are found on the side panel, or mount the remote bass knob on your dash and use it to make bass level adjustments easily.General Features:
8-inch Compact Powered Subwoofer System
Compatible with 2011-Up Jeep Wrangler 4-door vehicles
Plug-and-play installation
Installs under the driver's seat
Works with an Alpine or aftermarket head unit or with the factory Jeep radio
Built-in 120 Watt Amplifier
Strong and Durable cast aluminum enclosure
Dimensions: 13.5"L x 3"D x 9"W
Authorized Dealer
1-year Manufacturer's Warranty
Note: Not compatible with the factory-equipped subwoofer system
What's in the box:
Amplified enclosure with one 8" subwoofer installed
80" Wiring harness (Power/ Ground/ Speaker level input)
Wrangler radio T-Harness (with in-line fuse holder)
Two 15 amp ATO fuses (one installed in the power wire fuse holder/ 1 spare)
Remote level control with 15' cable attached (3.5mm mini-plug on end)
Adhesive-backed hook and loop mounting fasteners (to mount the remote)
2 Wrangler mounting brackets
Eight M4x10mm Machine screws (each with a flat washer and split lock washer)
Four M6x10mm Machine screws
Fifteen 7" Zip ties
Installation instructions
Owner's manual (English/ French/ Spanish)
Warranty information
Online product registration information
System installation notice
Alpine PWE-S8-WRA owner's manual
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine PSS-23WRA Sub, Amp and Tweeters Audio System for 2018-Up Jeep Wrangler JL
$1,399.95
$1,800.00
Alpine PSS-23WRA Powered Sound System Upgrade for 2018 - Up Jeep Wrangler Unlimited
Powered System Upgrade for 2018-Up Jeep® Wrangler Unlimited JL
TAKE YOUR WRANGLER’S SOUND BEYOND THE FACTORYEnjoy premium sound quality even with your JL’s top-off! The PSS-23WRA is a 300-watt powered system upgrade featuring a powered subwoofer, amplifier, and tweeters for the 2018-Up Jeep Wrangler Unlimited JL without the factory amplified system. The PSS-23WRA provides excellent sound performance whether the JL’s top is on or off.SOUND THAT WILL TURN HEADS WITH THE TOP ON OR OFFThe PWE-S8 subwoofer is engineered to load and disperse lower-frequency sound into the passenger’s footwell area to maximize bass extension throughout the Jeep for great sound with the top on or off. Included with the subwoofer is a remote bass knob so you can control the bass level from the convenience of your dashboard. The Included 4-channel amplifier more than doubles the power over the factory system allowing you to enjoy your tunes with the top off.
EASY BOLT-IN INSTALLATIONThe PWE-S8 Powered Subwoofer and KTP-445U Power Pack Amplifier don’t take up much since they mount under the passenger’s seat. The two products come pre-connected for easy bolt-in installation with simple wire routing. Mounting brackets for the products are included as well.SIMPLE TWEETER REPLACEMENTThe SPR-10TW Component Tweeters replace the factory tweeters on the top of the dash. These high-performance tweeters add much-needed high-frequency response that is lacking in the factory Jeep JL systems. An EQ Ring improves the tweeter’s dispersion characteristics and delivers a wide, flat frequency response.WORKS WITH ANY RADIOThe included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-23WRA is compatible with Alpine universal head units, the factory Jeep base radio, or other aftermarket radios.
General Features:
Complete Direct Fit Audio System Upgrade
Compatible with 2018 - Up Jeep Wrangler Unlimited JL
Compatible with models that don't have a factory-amplified system
All installation hardware, such as speaker adapters and amplifier wiring, included
CEA-2006 Compliant System
300 Watt RMS sound system
The system consists of:
8" Powered Subwoofer
Universal Power Pack Amplifier
2" Component Tweeters
Tweeter Adapters
Authorized Dealer
1-year Manufacturer's Warranty
PWE-S8 Subwoofer Features:
Peak: 240 watts
RMS: 120 watts
8" woofer high-excursion cone
built-in Class D amplifier
frequency response: 32-150 Hz
variable low-pass crossover (80-200 Hz)
variable phase control (0-180 degrees)
preamp- and speaker-level inputs
Dimensions: 13-1/2"W x 3"D x 9"H
KTP-445U Amplifier Features:
RMS Power Rating:
4 ohms: 45 watts x 4 Channel
2 ohms: 45 watts x 4 Channel
4 ohms: 90 watts x 2 Channel (Bridged)
Total RMS power output: 180 watts
CEA-2006 compliant amplifier
Increases the output of any head unit without having to install a full-size amplifier and amp install kit
The Independent front/Rear gain switch is adjustable from high to low
Runs off the receiver's power circuit
High-Pass Filter: selectable 60/80/120 Hz @ 12 dB/octave
Fast and simple installation
4-channel operation for four speakers
Minimum impedance of 2 ohms
Frequency response: 20-20,000 Hz
Fuse Rating: 15A x 1
SPR-10TW Component Tweeters:
2" Type-R Series Car Tweeters
Power Handling:
Peak: 450 watts per pair / 225 watts each
RMS: 150 watts per pair / 75 watts each
Silk Dome tweeter construction
4 ohms impedance
Copper-Clad Aluminum high-temperature voice coil
75% smaller external crossover filter removes harmful frequencies
4-way tweeter level attenuation
High-grade Neodymium magnet structure
Surface / Bottom / Flush Mountable
CEA-2031 compliant speakers
Sensitivity: 88dB
Frequency response: 1,000-29,000 Hz
Top-mount depth: 11/16"
Vehicle Compatibility:
JEEP
2018 - Up Wrangler Unlimited JL
Compatible with Wrangler JL Models that don't have a factory amplified system
What's in the box:
KTP-445U amplifier
PWE-S8 powered subwoofer (both pre-attached to vehicle mounting bracket)
7' Signal harness
12' Loomed power wire w/ inline 20A fuse
52-Pin t-harness
Four 10" speaker to RCA harnesses
Two SPR-10TW tweeters w/ integrated mounting plates and 8" wire loom w/ inline crossovers
Remote bass-level control w/ attached 16' cable
3" Strip of hook-and-loop fastener
Ten 6" wire-ties
1/2" Self-tapping screw
Star-washer
2 Alpine logos
Installation guide
Warranty sheet
Alpine PSS-23WRA owner's manual
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.