All Car Subwoofers (495)

2 Rockford Fosgate Prime R2SD2-10 prime stage 400W Max (200W RMS) 10" shallow mount dual 2-ohm voice coils subwoofer + Single Sealed Boxes Our Prime R2SD2-10 shallow subwoofer will satisfy your need when you have no space for bass. This 10” subwoofer handles 200 Watts RMS, and the 2-Ohm Dual Voice Coil design lets you wire them in various configurations. These drivers can fit in tight spaces due to their elevated motor structure, which reduces speaker depth. Mica-injected polypropylene cones make sure bass notes are clean and accurate. Stamp-cast baskets feature spider venting, typically reserved for traditional depth-mounted models, to keep the motor cool. These shallow subwoofers are specifically designed for use in sealed enclosures. General Features 10" Dual 2-ohm Shallow Mount Prime Stage 2 Series Subwoofer Peak Power Handling: 400 watts MS Power Handling: 200 watts Recommended power range: 100 - 200 watts RMS Impedance: 2 ohms Mica-injected polypropylene cone Black raised surround Linear spider with 16 AWG woven tinsel leads StampCast basket with integrated spider venting CEA-2031 Compliant, accurate power handling rating Designed for use with sealed and vented enclosures High-temperature voice coil Integrated PVC trim ring Anodized aluminum voice coil former 10" shallow-mount subwoofer with dual 2-ohm voice coils mica-injected polypropylene woofer cone with poly-foam surround stamped solid-steel frame sealed box volume: 0.7 cubic feet ported box volume: 1.4 cubic feet Frequency response: 45-250 Hz Sensitivity: 82 dB Mounting depth: 3-7/16" Cutout diameter: 9-1/8" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2SD2-10 package: One shallow-mount 10" Dual 2-ohm voice coil woofer Eight 1-1/8" Self-tapping screws 4mm Allen bit Installation and Operation Manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate P2D4-10 10" 1200W Car Audio Subwoofer Subwoofer Rockford Fosgate has always been known as "The PUNCH," and the P2 10" subwoofer continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel, along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond-cut cast aluminum trim ring. An optional grille insert is available. General Features: 10" Dual 4-ohm Punch Stage 2 Subwoofer Power Handling: RMS: 300 watts Power Handling: Peak: 600 watts Recommended power range: 250 - 375 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique Stamp Cast basket with integrated spider venting Sturdy 16-gauge compound bend frame geometry High modulus Kevlar reinforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced-strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-cast aluminum soft-touch painted trim ring allows for optional integrated grill Stamped Mesh Grille Insert Available: Rockford Fosgate P2P3G-10 Mounting Depth: 5.92" Cutout Diameter: 9.13" Magnet Weight: 66.40 oz Frequency Response: 30.8 - 250 Hz Xmax: 11.0 mm Sensitivity: 84 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ @38.5 Hz Recommended Sealed Enclosure: 0.59ft³ @43.1 Hz Shipping Weight: 13.6 Lbs. Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P2D4-10: Rockford Fosgate P2D4-10 owner's manual One 10" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. General Features: 10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S4 package: SWT-10S4 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PWE-S8 120W Compact Powered 8" Car Subwoofer for Under or Behind the Seat Its super shallow structure makes it ideal for under-seat installation or in small spaces. The compact, 120W PWE-S8 amplified subwoofer system lets you add deep, accurate bass to your sound system without taking up much space in your vehicle. General Features: 120W Compact Powered 8" Car Subwoofer Peak Power Handling: 240 watts RMS Power Handling: 120 watts 8" woofer high-excursion cone built-in Class D amplifier frequency response: 32-150 Hz variable low-pass crossover (80-200 Hz) variable phase control (0-180 degrees) preamp- and speaker-level inputs Dimensions: 13-1/2"W x 3"D x 9"H Authorized Dealer 1-year Manufacturer's Warranty What's in the PWE-S8 package: PWE-S8 owner's manual Amplified enclosure with one 8" subwoofer installed 12" Wiring harness Two 15 amp ATO fuses Remote level control with 15' cable attached Adhesive-backed hook and loop mounting fasteners 4 Mounting brackets Eight 5/8" Pan head self-tapping screws Eight M4x7.5mm Machine screws Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

  Alpine Halo R2-SB10V 750W RMS 10" Halo Series Linkable Ported Loaded Subwoofer Enclosure A subwoofer enclosure that sounds as good as it looks. Alpine’s preloaded, linkable subwoofer enclosures deliver powerful performance with the unique Alpine Halo design and ProLink technology. The new 2nd generation R-Series subwoofers take bass performance to extreme levels, delivering thunderous, ground-pounding bass. With Alpine’s enhanced sound performance, the R-Series subwoofers are highly accurate, creating a perfectly matched sound system for R-Series amplifiers and speakers – building an overall cohesive theme with its entire full-range Hi-RES Audio certified system. The R2-SB10V is designed for amplifier compatibility with 20hm loads. General Features: Dual 10" Vented / Ported Subwoofer Enclosure Power Handling: Peak: 2250 watts Total RMS: 750 watts Total Preloaded with single 10" Subwoofers Vented / Ported Square/Rectangle enclosure Enclosure Dimensions: 14.5" TD x BD x 16" W x 12.68" H Groundbreaking Alpine Halo Design ProLink™ ported enclosure design Optimal Sound Performance Includes preloaded R-W10D4 10” R-Series subwoofer CARB-compliant 3/4-inch MDF construction Premium black carpet Silver Alpine embossed side logo badge Brushed aluminum finished metallic front baffle Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: Frequency Response: 24 - 200 Hz Sensitivity: 85 dB Enclosure Features: 10" Square/Rectangle Enclosure Box Finish: Carpet What's in the R2-SB10V package: R2-SB10V Owner's manual Ported enclosure loaded with one R2-W10D4 subwoofer driver Warranty information Product registration information Safety notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine W12S4 12" BassLine Series 12" 750W Max (250W RMS) 4-ohm Bass Subwoofer Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.The surround and wattage match made in heaven.The 250 watts of continuous power that the W12S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features: 12-inch single 4Ω subwoofer Polypropylene and mica cone with poly-foam surround Peak Power Handling: 750 watts RMS Power Handling: 250 watts Recommended power range: 50W - 250W RMS Polypropylene-Mica cone High-excursion poly-foam surround Progressive Wavelit Ribs (P.W.R.) cone design Frequency Response: 32Hz-200Hz 5-5/16-inch mounting depth Recommended Sealed box volume: 1.09 Cu. Ft. Recommended Ported box volume: 1.91 Cu. ft Bass For All High-strength custom steel frame 8AWG push terminals 2" voice coil 52oz. magnet Recommended Box Volume: 0.5-1.5 Cu. ft.3 Top-mount depth: 5-5/16" Cutout diameter: 10-5/8" Frequency Response: 22 - 200Hz Sensitivity: 87.9dB Resonance Frequency (Fs): 30 Performance: Efficiency & Tight Bass An optimized magnet circuit allows more focused magnetism in the gap, improving efficiency. This means tighter bass control and more output! What's in the W12S4 package: One 12" Subwoofer Adhesive-backed foam gasket Application Guide Online product registration information Warranty information Important Notice! W12S4 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.