00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R2-W10D4 10" Type-R 4500w Dual 4-Ohm Car Audio Subwoofer Subs
$626.99
$999.99
2 Alpine R-Series next generation R2-W10D4 10" 4 Ohm 2250 Max, 750W RMS DVC Car Audio Subwoofer
The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response.
General Features:
10" Dual 4 ohms Type-R Series Series Subwoofer
RMS Power Handling: 750 watts
Peak Power Handling: 2250 watts
Kevlar Reinforced Pulp Paper Cone
High-Amplitude Multi-Roll (H.A.M.R) Surround
Push-Type Speaker Terminals (Up To 8AWG Wire Size)
Oversized Dust Cap
2.6" High-Temperature Voice coil
20 mm Xmax
123 oz. Double Stacked Ferrite magnet motor structure
Frequency Response: 26 - 200 Hz
Resonance Frequency (Fs): 32 Hz
Sensitivity: 82.8 dB
Sealed box volume: .4 cubic feet - .85 cubic feet
Ported box volume: .75 cubic feet - 1.3 cubic feet
Top-mount depth: 6"
Cutout diameter: 9.6"
CTA-2031 Compliant: Yes
Authorized Internet Dealer
Alpine KTE-10G Optional Protective subwoofer grille
1-year Manufacturer's Warranty
What is in the R2-W10D4 package:
R2-W10D4 owner's manual
One 10" Dual 4-ohm voice coil subwoofer
Plastic trim ring
Two 4.5" jumper wires
Application guide
Online product registration information
Warranty Information
Important Notice
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R2-W10D4 Car Audio Type R Dual 4 Ohm 1500 Watt 10" Subwoofers
$626.90
$999.99
2 Alpine R-Series next generation R2-W10D4 10" 4 Ohm 2250 Max, 750W RMS DVC Car Audio Subwoofer
The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response.
General Features:
10" Dual 4 ohms Type-R Series Series Subwoofer
RMS Power Handling: 750 watts
Peak Power Handling: 2250 watts
Kevlar Reinforced Pulp Paper Cone
High-Amplitude Multi-Roll (H.A.M.R) Surround
Push-Type Speaker Terminals (Up To 8AWG Wire Size)
Oversized Dust Cap
2.6" High-Temperature Voice coil
20 mm Xmax
123 oz. Double Stacked Ferrite magnet motor structure
Frequency Response: 26 - 200 Hz
Resonance Frequency (Fs): 32 Hz
Sensitivity: 82.8 dB
Sealed box volume: .4 cubic feet - .85 cubic feet
Ported box volume: .75 cubic feet - 1.3 cubic feet
Top-mount depth: 6"
Cutout diameter: 9.6"
CTA-2031 Compliant: Yes
Authorized Internet Dealer
Alpine KTE-10G Optional Protective subwoofer grille
1-year Manufacturer's Warranty
What is in the R2-W10D4 package:
R2-W10D4 owner's manual
One 10" Dual 4-ohm voice coil subwoofer
Plastic trim ring
Two 4.5" jumper wires
Application guide
Online product registration information
Warranty Information
Important Notice
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Pkg Pair of R-SB10V Alpine Halo Series 10" linkable ported subwoofer enclosure + Alpine KTX-H10 Linking Kit
$1,080.85
$1,200.00
Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure + KTX-H10 Linking Kit
Alpine 2-R-SB10V Pre-Loaded R-Series 10-inch Sub Enclosures
Enclosure Stacking Features Unique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system. The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look. Optimized Performance The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features:
Includes R-W10D4 wired in parallel
750W RMS power handling
2Ω Impedance
Ported enclosure design
Frequency response: 26-200 Hz
Vented enclosure tuning frequency: 36 Hz
Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D
Authorized Dealer
1-year Warranty
What is in the box:
Ported enclosure loaded with one R-W10D4 subwoofer driver
Rubber flange protector (installed on the subwoofer)
Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo
Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures
Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology.
General Features:
Aluminum rear link plate
10-inch Front ABS / Steel reinforced the port link
Center link stabilizing dowels
Alpine logo plate
All hardware included
Authorized Internet Dealer
What is in the KTX-H10 box:
Front port-link
Two 9" front port braces
23.25" Rear link-plate
Four 25mm hex-socket screws
Eight 14mm hex-socket screws
Four 20mm threaded alignment posts
3mm Allen-key
Installation instructions
Safety warnings
KTX-H10 Linking Kit owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine 2 R-SB10V Pre-Loaded R-Series 10-inch Sub Enclosures + KTX-H10 Linking Kit
$1,080.85
$1,200.00
2 Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure + KTX-H10 Linking Kit
Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure
Enclosure Stacking Features Unique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system. The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look. Optimized Performance The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features:
Includes R-W10D4 wired in parallel
750W RMS power handling
2Ω Impedance
Ported enclosure design
Frequency response: 26-200 Hz
Vented enclosure tuning frequency: 36 Hz
Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D
Authorized Dealer
1-year Warranty
Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo
Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures
Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology.
General Features:
Aluminum rear link plate
10-inch Front ABS / Steel reinforced the port link
Center link stabilizing dowels
Alpine logo plate
All hardware included
Authorized Internet Dealer
What is in the KTX-H10 box:
Front port-link
Two 9" front port braces
23.25" Rear link-plate
Four 25mm hex-socket screws
Eight 14mm hex-socket screws
Four 20mm threaded alignment posts
3mm Allen-key
Installation instructions
Safety warnings
KTX-H10 Linking Kit owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R-SB10V Pre-Loaded R-Series 10-inch Sub Enclosures + KTX-H10 Linking Kit
$1,080.85
$1,200.00
2 Alpine R-SB10V Pre-Loaded R-Series 10-inch Sub Enclosures + KTX-H10 Linking Kit
Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure
Enclosure Stacking Features Unique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system. The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look. Optimized Performance The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features:
Includes R-W10D4 wired in parallel
750W RMS power handling
2Ω Impedance
Ported enclosure design
Frequency response: 26-200 Hz
Vented enclosure tuning frequency: 36 Hz
Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D
Authorized Dealer
1-year Warranty
Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo
Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures
Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology.
General Features:
Aluminum rear link plate
10-inch Front ABS / Steel reinforced the port link
Center link stabilizing dowels
Alpine logo plate
All hardware included
Authorized Internet Dealer
What is in the KTX-H10 box:
Front port-link
Two 9" front port braces
23.25" Rear link-plate
Four 25mm hex-socket screws
Eight 14mm hex-socket screws
Four 20mm threaded alignment posts
3mm Allen-key
Installation instructions
Safety warnings
KTX-H10 Linking Kit owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R-SB10V Loaded 10" 750W R-W10D4 Subwoofers + Ported Sub Enclosure Box
$1,089.85
$1,200.00
2 Alpine R-SB10V Pre-Loaded R-Series 10-inch Sub Enclosures + KTX-H10 Linking KitAlpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure
Enclosure Stacking Features Unique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer to add more bass to their system easily. The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look. Optimized Performance The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and great sound quality. The 10-inch enclosure is tuned to 36 Hz, while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features:
Includes R-W10D4 wired in parallel
750W RMS power handling
2Ω Impedance
Ported enclosure design
Frequency response: 26-200 Hz
Vented enclosure tuning frequency: 36 Hz
Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D
Authorized Dealer
1-year Warranty
Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo
Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures
Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology.
General Features:
Aluminum rear link plate
10-inch Front ABS / Steel reinforced the port link
Center link stabilizing dowels
Alpine logo plate
All hardware included
Authorized Internet Dealer
What is in the KTX-H10 package:
KTX-H10 Linking Kit owner's manual
Front port-link
Two 9" front port braces
23.25" Rear link-plate
Four 25mm hex-socket screws
Eight 14mm hex-socket screws
Four 20mm threaded alignment posts
3mm Allen-key
Installation instructions
Safety warnings
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Pair of R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosures, with KTX-H10 Linking kit
$1,080.85
$1,200.00
2 Alpine R-SB10V Pre-Loaded R-Series 10-inch Sub Enclosures + KTX-H10 Linking Kit
Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure
Enclosure Stacking Features Unique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system. The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look. Optimized Performance The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features:
Includes R-W10D4 wired in parallel
750W RMS power handling
2Ω Impedance
Ported enclosure design
Frequency response: 26-200 Hz
Vented enclosure tuning frequency: 36 Hz
Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D
Authorized Dealer
1-year Warranty
Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo
Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures
Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology.
General Features:
Aluminum rear link plate
10-inch Front ABS / Steel reinforced the port link
Center link stabilizing dowels
Alpine logo plate
All hardware included
Authorized Internet Dealer
What is in the KTX-H10 box:
Front port-link
Two 9" front port braces
23.25" Rear link-plate
Four 25mm hex-socket screws
Eight 14mm hex-socket screws
Four 20mm threaded alignment posts
3mm Allen-key
Installation instructions
Safety warnings
KTX-H10 Linking Kit owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-SB10V x 2 Loaded 10" 600w S-W10D4 Subwoofers + Ported Sub Enclosure Box
$880.85
$1,400.00
2 Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier
Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier - This bundle includes an Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms, a pry kit, and an Alpine cozy.Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer EnclosureAlpine Electronics of America, Inc. introduced a new sound system lineup for the Halo category that includes a 10-inch enclosure and remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers.This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single box design but have a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure.Enclosure Stacking FeaturesUnique to Alpine, the subwoofer 10-inch is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features:
S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure
Includes S-W10D4 wired in parallel
600W RMS power handling
2Ω Impedance Ported enclosure design
Frequency response: 28-200 Hz
Vented enclosure tuning frequency: 36 Hz
Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D
What is in the S-SB10V box:
Ported enclosure loaded with one S-W10D4 subwoofer driver
Rubber flange protector (installed on the subwoofer)
Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo
Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures
Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology.
General Features:
Aluminum rear link plate
10-inch Front ABS / Steel reinforced the port link
Center link stabilizing dowels
Alpine logo plate
All hardware included
Authorized Internet Dealer
What is in the KTX-H10 box:
Front port-link
Two 9" front port braces
23.25" Rear link-plate
Four 25mm hex-socket screws
Eight 14mm hex-socket screws
Four 20mm threaded alignment posts
3mm Allen-key
Installation instructions
Safety warnings
KTX-H10 Linking Kit owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Rockford Fosgate P2D2-10 10" 1200w Dual Subwoofers+ Absolute DSS10 Sealed Sub Box Enclosure
$399.99
$750.00
2 Rockford Fosgate Punch P2D2-10 10" Inch 1200 Watt Dual 2 Ohm Car Subwoofers +Absolute DSS10 Sealed Sub Box Enclosure
Rockford Fosgate has always been known as "The PUNCH" and the P2 10" Punch car subwoofer certainly continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 10-inch subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available.General Features:
10" Dual 2 ohm Punch Stage 2 Subwoofer
Power Handling: Peak: 600 watts
Power Handling: RMS: 300 watts
Recommended power range: 250 - 375 watts RMS
CEA-2031 Compliant
Klippel Verified
Flex-fit Mounting pattern
Proprietary spider venting/cooling technique
StampCast basket with integrated spider venting
Sturdy 16 gauge compound bend frame geometry
High modulus Kevlar re-inforced paper-pulp cone
Semi-flexible, PVC removable protective motor cover
Multi-point high-temp/high-strength neck joint bonding technique
Tall-profile VAST Santoprene surround for a larger surface area
Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
Fatigue-resistant and reduced strain "stitched on" flexible lead wire design
Proprietary all-metal, radially oriented compression input terminal assembly
Optimized motor magnetics with extended pole and bumped vented backplate
High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar
Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill
Stamped Mesh Grille Insert Available: Rockford Fosgate P2P3G-10
Rockford Fosgate P2 Series
Mounting Depth: 5.92"
Cutout Diameter: 9.13"
Magnet Weight: 66.40 oz
Frequency Response: 29 - 250 Hz
Xmax: 11.0 mm
Sensitivity: 84 dB @ 1 watt / 1 meter
Recommended Ported Enclosure: 1.40ft³ @40.0 Hz
Recommended Sealed Enclosure: 0.59ft³ @46.6 Hz
Matching Amplifiers: (one driver)
Matching Amplifiers: (one driver) Rockford Fosgate R500X1D, Series @4ohms
Matching Amplifiers: (one driver) Rockford Fosgate P300X2 (bridged), Series @4ohms
Matching Amplifiers: (one driver) Rockford Fosgate P400X1, Series @4ohms
Matching Amplifiers: (one driver) Rockford Fosgate R750-1D, Series @4ohms
Matching Amplifiers: (one driver) Rockford Fosgate P1000X1BD, Series @4ohms
Matching Amplifier: (two drivers) Rockford Fosgate R500X1D, Series/Parallel @2ohm
Matching Amplifier: (two drivers) Rockford Fosgate R750-1D, Series/Parallel @2ohm
Matching Amplifier: (two drivers) Rockford Fosgate P1000X1BD, Series/Parallel @2ohm
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Rockford Fosgate P2D2-10 10" 1200w Dual Subwoofers + Sealed Sub Box Enclosure
$389.99
$750.00
2 Rockford Fosgate Punch P2D2-10 10" Inch 1200 Watt Dual 2 Ohm Car Subwoofers +Absolute DSS10 Sealed Sub Box Enclosure
2 Rockford Fosgate Punch P2D2-10 10" Inch 1200 Watt Dual 2 Ohm Car Subwoofers
Rockford Fosgate has always been known as "The PUNCH" and the P2 10" Punch car subwoofer certainly continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 10-inch subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available.General Features:
10" Dual 2 ohm Punch Stage 2 Subwoofer
Power Handling: Peak: 600 watts
Power Handling: RMS: 300 watts
Recommended power range: 250 - 375 watts RMS
CEA-2031 Compliant
Klippel Verified
Flex-fit Mounting pattern
Proprietary spider venting/cooling technique
StampCast basket with integrated spider venting
Sturdy 16 gauge compound bend frame geometry
High modulus Kevlar re-inforced paper-pulp cone
Semi-flexible, PVC removable protective motor cover
Multi-point high-temp/high-strength neck joint bonding technique
Tall-profile VAST Santoprene surround for a larger surface area
Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
Fatigue-resistant and reduced strain "stitched on" flexible lead wire design
Proprietary all-metal, radially oriented compression input terminal assembly
Optimized motor magnetics with extended pole and bumped vented backplate
High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar
Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill
Stamped Mesh Grille Insert Available: Rockford Fosgate P2P3G-10
Rockford Fosgate P2 Series
Mounting Depth: 5.92"
Cutout Diameter: 9.13"
Magnet Weight: 66.40 oz
Frequency Response: 29 - 250 Hz
Xmax: 11.0 mm
Sensitivity: 84 dB @ 1 watt / 1 meter
Recommended Ported Enclosure: 1.40ft³ @40.0 Hz
Recommended Sealed Enclosure: 0.59ft³ @46.6 Hz
Matching Amplifiers: (one driver)
Matching Amplifiers: (one driver) Rockford Fosgate R500X1D, Series @4ohms
Matching Amplifiers: (one driver) Rockford Fosgate P300X2 (bridged), Series @4ohms
Matching Amplifiers: (one driver) Rockford Fosgate P400X1, Series @4ohms
Matching Amplifiers: (one driver) Rockford Fosgate R750-1D, Series @4ohms
Matching Amplifiers: (one driver) Rockford Fosgate P1000X1BD, Series @4ohms
Matching Amplifier: (two drivers) Rockford Fosgate R500X1D, Series/Parallel @2ohm
Matching Amplifier: (two drivers) Rockford Fosgate R750-1D, Series/Parallel @2ohm
Matching Amplifier: (two drivers) Rockford Fosgate P1000X1BD, Series/Parallel @2ohm
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Rockford Fosgate Punch P2D2-10 10" Inch 1200 Watt Dual 2 Ohm Car Subwoofers
$299.98
$450.00
2 Rockford Fosgate Punch P2D2-10 10" Inch 1200 Watt Dual 2 Ohm Car Subwoofers
Rockford Fosgate has always been known as "The PUNCH" and the P2 10" Punch car subwoofer certainly continues with the tradition. Kevlar fiber reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 10-inch subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available.General Features:
10" Dual 2 ohm Punch Stage 2 Subwoofer
Power Handling: Peak: 600 watts
Power Handling: RMS: 300 watts
Recommended power range: 250 - 375 watts RMS
CEA-2031 Compliant
Klippel Verified
Flex-fit Mounting pattern
Proprietary spider venting/cooling technique
StampCast basket with integrated spider venting
Sturdy 16 gauge compound bend frame geometry
High modulus Kevlar re-inforced paper-pulp cone
Semi-flexible, PVC removable protective motor cover
Multi-point high-temp/high-strength neck joint bonding technique
Tall-profile VAST Santoprene surround for larger surface area
Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
Fatigue resistant and reduced strain "stitched on" flexible lead wire design
Proprietary all-metal, radially oriented compression input terminal assembly
Optimized motor magnetics with extended pole and bumped vented backplate
High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar
Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill
Stamped Mesh Grille Insert Available: Rockford Fosgate P2P3G-10
Rockford Fosgate P2 Series
Mounting Depth: 5.92"
Cutout Diameter: 9.13"
Magnet Weight: 66.40 oz
Frequency Response: 29 - 250 Hz
Xmax: 11.0 mm
Sensitivity: 84 dB @ 1 watt / 1 meter
Recommended Ported Enclosure: 1.40ft³ @40.0 Hz
Recommended Sealed Enclosure: 0.59ft³ @46.6 Hz
Matching Amplifiers: (one driver)
Matching Amplifiers: (one driver) Rockford Fosgate R500X1D, Series @4ohms
Matching Amplifiers: (one driver) Rockford Fosgate P300X2 (bridged), Series @4ohms
Matching Amplifiers: (one driver) Rockford Fosgate P400X1, Series @4ohms
Matching Amplifiers: (one driver) Rockford Fosgate R750-1D, Series @4ohms
Matching Amplifiers: (one driver) Rockford Fosgate P1000X1BD, Series @4ohms
Matching Amplifier: (two drivers) Rockford Fosgate R500X1D, Series/Parallel @2ohm
Matching Amplifier: (two drivers) Rockford Fosgate R750-1D, Series/Parallel @2ohm
Matching Amplifier: (two drivers) Rockford Fosgate P1000X1BD, Series/Parallel @2ohm
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Rockford Fosgate Punch P2D2-10 DVC 2 Ohm 10-Inch 300 Watts RMS 600 Watts Peak
$299.98
$450.00
2 Rockford Fosgate Punch P2D2-10 10" Inch 1200 Watt Dual 2 Ohm Car Subwoofers
Rockford Fosgate has always been known as "The PUNCH" and the P2 10" Punch car subwoofer certainly continues with the tradition. Kevlar fiber reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 10-inch subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available.General Features:
10" Dual 2 ohm Punch Stage 2 Subwoofer
Power Handling: Peak: 600 watts
Power Handling: RMS: 300 watts
Recommended power range: 250 - 375 watts RMS
CEA-2031 Compliant
Klippel Verified
Flex-fit Mounting pattern
Proprietary spider venting/cooling technique
StampCast basket with integrated spider venting
Sturdy 16 gauge compound bend frame geometry
High modulus Kevlar re-inforced paper-pulp cone
Semi-flexible, PVC removable protective motor cover
Multi-point high-temp/high-strength neck joint bonding technique
Tall-profile VAST Santoprene surround for larger surface area
Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
Fatigue resistant and reduced strain "stitched on" flexible lead wire design
Proprietary all-metal, radially oriented compression input terminal assembly
Optimized motor magnetics with extended pole and bumped vented backplate
High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar
Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill
Stamped Mesh Grille Insert Available: Rockford Fosgate P2P3G-10
Rockford Fosgate P2 Series
Mounting Depth: 5.92"
Cutout Diameter: 9.13"
Magnet Weight: 66.40 oz
Frequency Response: 29 - 250 Hz
Xmax: 11.0 mm
Sensitivity: 84 dB @ 1 watt / 1 meter
Recommended Ported Enclosure: 1.40ft³ @40.0 Hz
Recommended Sealed Enclosure: 0.59ft³ @46.6 Hz
Matching Amplifiers: (one driver)
Matching Amplifiers: (one driver) Rockford Fosgate R500X1D, Series @4ohms
Matching Amplifiers: (one driver) Rockford Fosgate P300X2 (bridged), Series @4ohms
Matching Amplifiers: (one driver) Rockford Fosgate P400X1, Series @4ohms
Matching Amplifiers: (one driver) Rockford Fosgate R750-1D, Series @4ohms
Matching Amplifiers: (one driver) Rockford Fosgate P1000X1BD, Series @4ohms
Matching Amplifier: (two drivers) Rockford Fosgate R500X1D, Series/Parallel @2ohm
Matching Amplifier: (two drivers) Rockford Fosgate R750-1D, Series/Parallel @2ohm
Matching Amplifier: (two drivers) Rockford Fosgate P1000X1BD, Series/Parallel @2ohm
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca