All Car Speakers (984)

Absolute PRO6993 Pro Series 6" x 9" 3-Way 600 Watts Max Total with Dome Tweeter  An Affordable Upgrade to your vehicle's Factory Sound, Absolute Pro Series Is One of The Most Popular Choices. These Tough, Dependable Car Speakers Have A Devoted Following, and For Good Reason. You will Get Absolute Quality That Will Elevate Your Music To A Higher Level, Revealing More Detail Than You Ever Heard from Your Factory Speakers. Your Favorite Music Will Gain A Level of Dimension That Factory Speakers Can't Manage. Absolute Pro Series Speakers Are Your Go-To Solution Without Breaking the Bank. Coaxial Loudspeakers in Professional Audio Enable Sound from Two Drivers to Come from One Source. This characteristic allows a broader field of listening to a synchronized summation of speaker drivers than loudspeaker enclosures that contain physically separated drivers. The pattern of response is also symmetric around the axis of the loudspeaker. General Features: 6"x 9" Pro Series 3-Way Car Speakers System 600 Watts Maximum Peak (Pair) 300 Watts Maximum Peak (Each) 140 Watts RMS 20 Oz Magnet with Chrome Protection Carbon Compound Aramid Fiber Woven Cone Woofer with Rubber Edge 66mm PEI Cone Mid Range 30mm PEI Dome Tweeter 1.25" Polypropylene Dome Tweeter 35mm Voice Coil Butyl Rubber Surround 1.5" high-temperature aluminum voice coil Grilles and mounting hardware included 4 Ohms Impedance 30-22000 (Hz) Frequency Response 92dB/W/M Include PRO Crossover 2 Years Manufacturer's Warranty Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SS57 5x7" Rear Factory Speaker Replacement Kit For 1999-2002 Ford Expedition Alpine S-S57 460W Max (150W RMS) 6x8/5x7" Type S Series 2-Way Coaxial Car Speakers IT FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a 5x7-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set makes it a simple solution to getting Alpine sound in many of these vehicles on the road today. INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 5"x7" S-Type Series TYPE Car Speakers/Component System Peak Power Handling: 460 watts per pair / 230 watts each RMS Power Handling: 150 watts per pair / 75 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 1.1" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2-11/32" Cutout Dimensions: 4-15/16" x 7-3/16" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the S-S57 package: S-S57 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-S57 460W Max (150W RMS) 5" x 7" Type S Series 2-Way Coaxial Car Speakers Alpine S-S57 460W Max (150W RMS) 6x8/5x7" Type S Series 2-Way Coaxial Car Speakers IT FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a 5x7-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set makes it a simple solution to getting Alpine sound in many of these vehicles on the road today. INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 5"x7" S-Type Series TYPE Car Speakers/Component System Peak Power Handling: 460 watts per pair / 230 watts each RMS Power Handling: 150 watts per pair / 75 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 1.1" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2-11/32" Cutout Dimensions: 4-15/16" x 7-3/16" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the S-S57 package: S-S57 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine X-S69C 6" x 9" Component System 720W Max, 240W RMS 6" x 9" X-Type 2-Way Component Car Speakers EXPERIENCE DETAIL YOU’VE NEVER HEARD BEFORE The new X-Series speakers combine proven technologies, superior materials, and innovative design to reproduce sound so accurately, you’ll feel like you’re right in front of the performance. HI-RESOLUTION AUDIO Hi-Res Audio is the next level of digital audio for music fans alike and requires an incredibly wide dynamic range to reproduce music with amazing realism and depth. The X-Series speakers are Hi-Rez compatible and when paired with other X-Series components, provide an incredible Hi-Rez Audio experience. CARBON GRAPHITE TWEETER The tweeter’s diaphragm is built from a sheet of carbon graphite which enables it to reproduce frequency ranges in the upper 55kHz range, usually achieved using a harsher, hard dome tweeter like Aluminum or Titanium. Carbon graphite allows us to hit those High-rez audio-compatible frequencies while maintaining the softer, more damped sound qualities of a soft dome. NEW CONE MATERIAL The X-Series’ speaker cone is made from a tightly interwoven Nano-fiber material. The extremely small diameter fibers create a damped, rigid cone structure while staying lightweight. Because of this light rigidity, the X-Series speaker is capable of highly accurate sound reproduction while maintaining a soft tonality. The cone’s resistance to flex ensures it is very little to no discoloration of sound and phase shifts. The result is a highly accurate speaker that is well-staged in front of you. General Features: 6" x 9" X-Type 2-Way Component System Power Handling: Max: 720 W per set/ 360 W per side RMS: 240 W per set/ 120 W per side Recommended power range: 10 - 120W RMS Hi-Res Audio compatible Nano-fiber woofer cone H.A.M.R. surround 1" carbon graphite tweeter Tweeters swivel within flush mounts Adjustable tweeter attenuation: 0dB, +3dB, -3dB Adjustable tweeter phase: Normal or reverse A-Pole type neodymium magnet Top-mount Depth: 3-1/16" Cutout Dimensions: 5-7/8" x 8-7/8" 4 ohms impedance Frequency Response: 45 - 50,000 Hz Sensitivity: 89 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the X-S69C package 2 Woofers 2 Woofer grilles+ 2 Grille badges 2 Tweeters (each has a 26" length of wire attached) 2 Tweeter grilles (installed) 2 Surface mount housings (with tweeters installed) 2 Bottom mount brackets Two tweeter crossovers (each has attached 32" input and 14" output wires) 2 Rectangular adhesives backed pads (crossover) 2 Circular adhesives backed discs (tweeter) Eight M4x60mm Machine screws (with washers attached) 8 Flat washers & 8 Split lock washers Eight 1-1/8" Screws & Eight 5/8" Screws 8 Speed-clips & 4 Speed nuts Four 5" Zip ties Warranty information Important Notice Online product registration information Templates and specs on the box X-S69C owner’s Manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine R-S69C.2 Component System 600W Peak, 200W RMS R-Series 6x9" Component 2-Way Speakers FOR LIVING LOUD AND HAVING FUN If you play your music loud and want others to know, the R-Series speakers match you. You will enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. MORE OUTPUT FOR MORE FUN The woofers have a large, 35-millimeter (mm) voice coil, allowing more coil windings to fit in the gap. This results in more excellent heat dissipation and increased power handling for superior control and output. The R-Series speakers incorporate Alpine’s patented High-Amplitude Multi-Roll Surround (H.A.M.R.) for control and accuracy. The component models use a crossover with an in-line, passive design and reduced footprint, contributing to easier installation. EXCLUSIVE CONE TECHNOLOGY The R-Series speakers use Alpine’s exclusive cone technology, Carbon Fiber Reinforced Polymer (CFRP), a high-strength, lightweight material. CFRP can be custom-formed so that its fibers align in the same direction as the curve and shape of the cone, thereby reducing resonant peaks and increasing the speakers’ mid-bass performance and dynamic range. CFRP is also used as a tweeter diaphragm, enabling the speakers to perform into the 45kHz range and making them compliant with High-Resolution Audio playback.  BETTER FITMENT WITHOUT SACRIFICING MOTOR FORCE The R-Series speakers use a neodymium magnet, which gives them a shorter overall height compared to other speaker brands. They also use a new, shallower grill design. The result: an improved fitment design that lets the R-Series speakers fit into tighter install locations without sacrificing motor force. Product Details: Alpine R-S69C.2 Alpine R-Series 6"x9" 2-Way Component Car Speakers (Pair) Power Handling: RMS: 100 Watts Peak: 300 Watts Impedance: 4 Ohms Carbon-fiber reinforced polymer (CFRP) woofer Carbon-fiber reinforced polymer dome tweeter Frequency response: 60Hz - 40 kHz Sensitivity: 90 dB Top-mount depth: 2-7/8" Grilles included Authorized Dealer 1-year Manufacturer's Warranty What is in the R-S69C.2 package: 2 Woofers 2 Woofer grilles 2 Grille badges 2 Tweeters (each has an attached 30" length of wire) 2 Tweeter grilles (installed) 2 Swivel flush mount housings (with tweeters installed) Two crossovers (each has attached input and output wires) 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-1/8" Screws 8 Speed-clips Eight M4x60mm Machine screws 8 Nuts 8 Flat washers 8 Split lock washers Four 5" Zip ties 2 Pieces of two-sided tape Warranty information Online product registration notes Important Notice sheet Template and specs on the box R-S69C.2 Owner’s Manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Pioneer TS-A6960F 6x9" 4-Way 450Watt Coaxial Car Audio Speakers (Pair) Interchange Part Number: TS-A6967 These Pioneer TS-A6960F 6x9" 4-way car audio speakers are the elite quality speakers you need to take your car's entertainment system to the next level. These speakers feature a carbon & mica-reinforced IMPP cone and a long symmetrical voice coil which enhances the depth and richness of the bass and minimizes distortion. With an elastic polymer surround, a metal woofer basket, and an injection-molded polypropylene cone, these speakers not only deliver incredible sound output but also give you a durable construction built to last throughout prolonged use. General Features: 6x9" 4-Way Audio Speakers Magnetic Circuit Long Symmetrical Voice Coil Elastic Polymer Surround Y-35 Woofer Magnet Metal Woofer Basket Woofer Magnet Weight: 320g Carbon & Mica Reinforced IMPP Composite Woofer Cone Max Music Power (Nominal): 450W MAX (90W Nom) Frequency Response: 35Hz - 24kHz (-20dB) Sensitivity: 89dB (±1.5dB)(1W/1m) Impedance: 4 Ohms Mounting Depth: 72mm Mounting Depth with Mount Adapter: 62mm Cut Out Dimensions: 153mm x 222mm 450 Watts Max Power (90 Watts Nominal) 18mm Tweeter and 11mm Super Tweeter 2-1/4" cellulose fiber cone midrange 6 x 9" carbon and mica reinforced Injection Molded Polypropylene (IMPP) cone construction Carbon- and Mica-Reinforced IMPP Woofer Elastic Polymer Surround 2 1/4" Cellulose Fiber Cone Midrange Twin PET (Polyethylene Terephthalate) Hard Dome Tweeters 450 Watts Peak Power Cutout Diameter: 6.02" x 8.74" Top-Mount Depth: 2-7/8" Grilles Included Technical Specifications: System: System Type: 4-way Coaxial Sound Pressure Level (Sensitivity): 89 dB (+- 1.5dB) Frequency Range: 35 Hz to 24 kHz Maximum Peak Power Handling: 450 Watts Nominal Impedance: 4 ohms Woofer: Diameter: 6 x 9" Cone Material: Carbon and mica-reinforced IMPP in moonstone gray Surround Material: Elastic polymer Magnet Material: Ferrite Magnet Weight: 11.3 oz Mounting Depth: 2-7/8" Tweeter: Type: Polyethylene terephthalate (PET) dome tweeter (x2) Diameter: 11 mm and 18 mm Crossover Network: Crossover Frequency: 3,600 Hz Package Contents: Pioneer TS-A6960F Owner's manual 2x Pioneer TS-A6960F 450 Watts Speakers Wire Harness Screws ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate Punch P1694 300W Peak, 150W RMS 6x9" 4-Way Punch Series Full Range Coaxial Car Speakers The P1694 is a 6” x 9” 4-way full-range speaker rated at 150 watts RMS designed for fanatics needing a quality factory replacement driver. It includes two speakers with grilles, integrated high-pass crossovers, and mounting hardware. Systems needing a premium drop-in speaker will benefit from this 6"x9" Punch series full-range speaker. The P1694 offers a similar sonic experience to the P1692 but in a fulfilling 4-way array. The Flex Fit™ basket ensures compatibility with oddly shaped factory speaker locations, and an ICC (Integrated Concealed Crossover) eliminates the need to mount any black boxes. General Features: 6" x 9" Punch Series 4-way Full Range Car Speakers FlexFit basket design Power Handling: Peak: 300 watts per pair / 150 watts each RMS: 150 watts per pair / 75 watts each Recommended Power Range: 10 - 75 watts RMS per channel Mica-injected, polypropylene cone woofer OEM adapter plate included PEI dome tweeter Butyl rubber surround 1" Titanium composite dome midrange Two 1/2" PEI Dome tweeters Built-in 3-way crossover 4 ohms impedance Kapton voice coil former Cold-rolled steel baskets reduce unwanted resonance Injection-molded mineral-filled polypropylene cone Top-mount depth: 3" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P1694 package: Two 4-way 6X9" speakers 2 Grilles 3mm Allen head bit 8 Allen-head self-tapping screws 8 Phillips-head self-tapping screws 8 Speed clips Installation & Operation manual P1694 owner's manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Pair Rockford Fosgate Punch P1694 300W Peak, 150W RMS 6x9" 4-Way Punch Series Full Range Coaxial Car Speakers The P1694 is a 6”x9” 4-way full-range speaker rated at 150 watts RMS designed for fanatics needing a quality factory replacement driver. Includes two speakers with grilles, integrated high-pass crossovers, and mounting hardware. Systems that need a premium drop-in speaker will certainly benefit from this Punch series 6"x9" full-range speaker. The P1694 offers a similar sonic experience to the P1692 but in a fulfilling 4-way array. The Flex Fit™ basket ensures compatibility with oddly shaped factory speaker locations and an ICC (Integrated Concealed Crossover) eliminates the need to mount any black boxes. General Features: 6" x 9" Punch Series 4-way Full Range Car Speakers FlexFit basket design Power Handling: Peak: 300 watts per pair / 150 watts each RMS: 150 watts per pair / 75 watts each Recommended Power Range: 10 - 75 watts RMS per channel Mica-injected, polypropylene cone woofer OEM adapter plate included PEI dome tweeter Butyl rubber surround 1" Titanium composite dome midrange Two 1/2" PEI Dome tweeters Built-in 3-way crossover 4 ohms impedance Kapton voice coil former Cold-rolled steel baskets reduce unwanted resonance Injection-molded mineral-filled polypropylene cone Top-mount depth: 3" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P1694 package: Two 4-way 6X9" speakers 2 Grilles 3mm Allen head bit 8 Speed clips Installation & Operation manual P1694 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate P1650 6.5" 110W + P1694 6x9" 150W Car Audio Speakers Fanatics that need a great-sounding speaker to replace factory-installed versions will certainly benefit from this Punch series full-range speaker. The P1650 & P1694 offer a Flex Fit2™ basket to ensure compatibility with U.S., European, and import vehicles. European installers will love this new "European Basket" to easily fit a variety of VW, Citroen, and Vauxhall models. The system also features an ICC (Integrated Concealed Crossover), eliminating the need to mount any black boxes. Rockford Punch P1650 220W Max 6.5" 2-Way P1 Punch Series Coaxial Speakers w/ PEI Dome Tweeter The Punch P1650 is a P1 full-range speaker system featuring a true 6.5" midrange optimized for a wide variety of U.S., European, and import vehicles and a coaxial mounted tweeter. General Features: 6-1/2" P1 Punch Series 2-Way Car Speakers Power Handling: Peak: 220 watts per pair / 110 watts each RMS: 110 watts per pair / 55 watts each Recommended power range: 10 - 55 watts RMS per channel Injection-Molded Carbon Fiber-filled Polypropylene cone material 3/4" PEI Dome Tweeter Santoprene rubber surround CEA-2031 compliant speakers 1" high-temperature voice coil Integrated ICC crossover filter removes unwanted frequencies from the drivers DDC (Discreet Dual Clamp) provides concentric clamping pressure to maximize fitment FlexFit (Slot Mounted Frame Pattern) allows slight adjustment of speaker when mounted VAST (Vertical Attach Surround Technique) provides up to 25% more effective radiating cone area Rubber magnet boot cover Grilles and mounting hardware included 4 ohms impedance Frequency response: 45 - 20,000 Hz Top-mount depth: 2-1/4"" Sensitivity: 88dB Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P1650 package: Two 2-way speakers 2 Grilles Eight 1-1/4" Allen head screws 3mm Allen head bit 8 Speed clips Installation/Operation manual P1650 owner's manual Rockford Fosgate Punch P1694 Car Speaker 300W Peak, 150W RMS 6x9" 2-Way Punch Series Full Range Coaxial Speakers General Features: 6" x 9" Punch Series 4-way Full Range Car Speakers FlexFit basket design Power Handling: Peak: 300 watts per pair / 150 watts each RMS: 150 watts per pair / 75 watts each Recommended Power Range: 15 - 75 watts RMS per channel VAST (Vertical Attach Surround Technique) butyl Rubber surround Mica-injected, polypropylene cone woofer OEM adapter plate included PEI dome tweeter Butyl rubber surround 3/4" Treated PEI dome tweeter 1" Titanium composite dome midrange Stamp Cast frame structure Two 1/2" PEI Dome tweeters Built-in 3-way crossover 4 ohms impedance Cutout Dimensions: 5.77" x 8.51" Kapton voice coil former Cold-rolled steel baskets reduce unwanted resonance Injection-molded mineral-filled polypropylene cone Includes grill and mounting hardware Frequency Response: 60 - 22,000 Hz Top-mount Depth: 3" Sensitivity: 91dB Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P1694 package: Two 4-way 6X9" speakers 2 Grilles 3mm Allen head bit 8 Allen-head self-tapping screws 8 Phillips-head self-tapping screws 8 Speed clips Installation & Operation manual P1694 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Alpine S2-S65 6.5" 480 Watts S-Series Hi-Res Certified 2 Way Coaxial Car Speakers Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S65 6.5” Coaxial Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers, resulting in a more accurate and natural sound at an entry-level price point. Crafted with a unique combination of polyphylene, Glass Fiber, and Mica Cone materials, the S2-S65 is designed for lightweight construction, high output, and low distortion, giving you a clean and accurate audio experience. General Features: 6-1/2" 2-way Coaxial Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each Power Handling RMS: 160 watts per pair / 80 watts each Polypropylene cone material Rubber speaker surround High Amplitude Multi-Roll surround technology HI-RES Certified Optional Grills KTE-S65G available 1" Silk Dome Tweeters Ferrite magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 55 - 40000 Hz Sensitivity: 88 dB Authorized Internet Dealer Weight: ‎6.4 pounds Dimensions, ‎16.5 x 8.5 x 5 inches MFR #: S2-S65 1-year Manufacturer's Warranty What's in the S2-S65 package: Alpine S2-S65 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire  Eight 1-1/8" Screws Eight M4x6.5mm  Eight M4 Nuts 6 Flat washers 8 Speed clips Warranty information Online product registration information Important Notice sheet Declaration of conformity Template and specs on box Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Pair Alpine S-S50 340W Max (110W RMS) 5 1/4" Type S Series 2-Way Coaxial Car Speakers IT FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a 5 1/4-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set is a simple solution to getting Alpine sound in many of these vehicles today. INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 5 1/4" S-Type Series TYPE Car Speakers/Component System Peak Power Handling: 340 watts per pair / 170 watts each RMS Power Handling: 110 watts per pair / 55 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 3/4" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the S-S50 package: S-S50 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws Eight M4x6mm Machine screws Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-S65 480W Max (160W RMS) 6.5" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 6.5-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6.5" S Series 2-way Coaxial Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each RMS Power Handling: 160 watts per pair / 80 watts each Carbon Fiber Reinforced Plastic cone material High Roll Foam speaker surround 1" Silk Dome Tweeters Neodymium magnet motor structure Top-mount Depth: 2.28" Cutout Dimensions: 5" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Grilles are sold separately Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S-S65 Package: S-S65 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws 8 Speed clips Warranty information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.