All Car Speakers (983)

Pair of Pioneer 5x7/ 6x8 Inch 4-Way 350 Watt Car Audio Speakers | TS-A6880F (2 Speakers) + Free Absolute Mobile Bracket Holder Features: 6"X8" 4-Way Coaxial speaker - 2 speakers + phone magnet holder 350 watts Max power (80 watts nominal) Twin 11mm polyethylene Terephthalate (pet) hard dome tweeter 1-5/8" Cellulose fiber cone midrange 6 x 8" Carbon and mica reinforced injection molded polypropylene (IMPP) cone construction At a Glance 6" x 8" A-Series 4-Way Car Speakers Power Handling: Peak: 350 watts per pair / 125 watts each RMS: 80 watts per pair / 40 watts each Carbon and MICA Reinforced IMPP Woofer Cone Elastic Polymer Surround Material Dual 11mm Dome Tweeters 1 5/8" Cellulose Fiber Cone Midrange Rubber magnet boot cover CEA-2031 compliant speakers High Heat Resistant Wire Voice Coil 7.6oz. Ferrite magnet motor structure Top-mount Depth: 2.5" 4 ohms impedance Frequency Response: 34-34,000 Hz Sensitivity: 88dB ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Pair PIONEER TS-A6880F 5 x 7"/ 6 x 8" 4-WAY SPEAKERS + Metra 72-5600 Speaker HARNESS ConnectorsPioneer TS-A6880F 350 Watt 6" x 8" 4-Way Coaxial Car Audio Speaker 6x8" 5" x 7"General Features: 4-way, 6" x 8" speakers Frequency Response: 34Hz-34kHz 350 Watts Max Power, 80 Watts RMS Sensitivity: 88dB @ 1W/1m 2 1/2" mounting depth Drop-in replacement installation OPEN & SMOOTH(TM) sound design Clear, high frequencies & deep rich bass Low distortion Midrange/tweeter bridge with Waveguide High heat-resistant wire voice coil Carbon & mica-reinforced IMPP woofer cone Elastic polymer surround material 7.6oz ferrite woofer magnet Dual 11mm dome tweeters 1 5/8" cellulose fiber cone midrange 4,600Hz woofer to midrange crossover Impedance: 4ohm Includes multi-fit installation adapters, screws, speaker lead wires & grills Package Dimensions: 10.80" x 8.40" x 2.40" Weight: Approx. 3.5lbs Metra 72-5600 Speaker Connector Harness for Select Ford GM Chevy Lincoln Mercury Mazda Replacement Harness: Avoid cutting up your factory speaker connectors when installing aftermarket speakers! Our speaker harness adapters are designed to plug directly into the existing factory speaker connector eliminating the guesswork of matching up the correct polarity. They will not affect your factory vehicle warranty. Each package includes two harnesses needed to install one pair of speakers. Compatible WithChevrolet Camaro 2010-2015 Colorado (w/ 7" MyLink radio, RPO code: IOB) 2017 Colorado 2015-2017 Silverado 1500/2500/3500 (w/ 7" MyLink radio, RPO code: IOB) 2016-2017 Silverado 1500 2014-2017 Silverado 2500HD, 3500HD 2015-2017 Suburban 2015-2017 Tahoe 2015-2017 Ford Crown Victoria 1998-2011 Edge 2007-2010 Escape 2008-2012 Escape (w/ out sub) 2004-2007 Escape (seven-speaker system w sub) 2004-2007 Escape Hybrid 2004-2007 Escape 2001-2003 Excursion 2000-2005 Expedition 2007-2014 Expedition Non-NAV 2004-2006 Expedition with factory NAV 2004-2006 Expedition (late production) with factory NAV 2003 Expedition (late production) 2003 Expedition (early production) 2003 Expedition 1999-2002 Expedition (fleet) 2015 Expedition (SSV) 2015 Explorer 2005-2010 Explorer (Audiophile system w sub) 2004-2005 Explorer 2002-2003 Explorer Sport Trac 2001-2010 F-150 2004-2008 F-250/350/450/550 2017 F-250/350/450/550 (with 8.4-inch screen) 2013-2016 F-250/350/450/550 (without 8.4-inch screen) (with CD) 2013-2016 F-250/350/450/550 XL (without CD) 2013-2016 F-250/350/450/550 1999-2012 F-250 1998 F-650/750 (AM/FM/CD) 2016-2017 F-650/750 (AM/FM) 2016-2017 F-650/750 2000-2015 Focus (without MyFordTouch) 2012-2014 Focus 2000-2007 Focus (with Blaupunkt radio) 2003-2004 Freestar 2004-2007 Fusion 2006-2009 Mustang 2010-2014 Mustang (late 2008 build date) 2008-2009 Mustang (early 2008 build date) 2008 Mustang 2005-2007 Ranger 1998-2011 Taurus (without electronic controls) 2000-2007 Taurus (with electronic controls) 2000-2007 Thunderbird 2002-2005 Transit Connect 2010-2011 GMC Canyon (w/ 7" MyLink radio, RPO code: IOB) 2017 Canyon 2015-2017 Sierra 1500/2500/3500 (w/ 7" MyLink radio, RPO code: IOB) 2016-2017 Sierra 1500 2014-2017 Sierra 2500HD, 3500HD 2015-2017 Yukon / Yukon XL 2015-2016 Yukon Denali / Yukon XL Denali 2015-2016 Lincoln Aviator (with NAV) 2003-2005 Aviator (without NAV) 2003-2005 Mark LT 2005-2008 MKX (with NAV) 2007-2010 MKX (without NAV) 2007-2010 MKZ (with NAV) 2007-2009 MKZ (without NAV) 2007-2009 Navigator (with NAV) 2007-2014 Navigator (without NAV) 2003-2014 Navigator (with NAV) (w/ THX audio) 2003-2006 Navigator (with NAV) (w/o THX audio) 2003-2006 Navigator (early production) 2003 Navigator 1999-2002 Town Car (with NAV) 2003-2011 Town Car (without NAV) 2003-2011 Zephyr (with NAV) 2006 Zephyr (without NAV) 2006 Mazda B-Series Pickup 1998-2009 Mazda3 2004-2009 Tribute 2008-2011 Tribute 2001-2006 Mercury Grand Marquis 1998-2010 Marauder 2003-2004 Mariner 2005-2011 Monterey 2004-2007 Mountaineer 2006-2010 Mountaineer(Audiophile system w sub) 2004-2005 Mountaineer(system w/ out factory sub) 2004-2005 Mountaineer 2002-2003 Sable 2008-2009 Sable (no electronic controls) 2000-2006 Sable (electronic controls) 2000-2007 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

2 Pair Pioneer TS-A6880F 350W Max 6" x 8" Speakers + 2 Pair Metra 72-5600 + 25 feet 16G Speaker WirePIONEER TS-A6880F 6 x 8" 4-WAY CAR AUDIO COAXIAL SPEAKERS 350W MAXGeneral Features: RMS: 160 watts per pair / 80 watts each Peak: 700 watts per pair / 350 watts each Frequency response: 34Hz - 34kHz Impedance: 4-ohms Sensitivity: 88 dB New Carbon & Mica reinforced IMPP Cone Design “Open & Smooth”™ Sound Concept Mounting Depth: 62mm Cut-out Dimensions: 133mm x 191mm 2 Pair Metra 72-5600 Speaker Connector Harness for Select Ford GM Chevy Lincoln Mercury Mazda (2 pair) Replacement Harness: Avoid cutting up your factory speaker connectors when installing aftermarket speakers! Our speaker harness adapters are designed to plug directly into the existing factory speaker connector eliminating the guesswork of matching up the correct polarity. They will not affect your factory vehicle warranty. Each package includes two harnesses needed to install one pair of speakers. Compatible WithChevrolet Camaro 2010-2015 Colorado (w/ 7" MyLink radio, RPO code: IOB) 2017 Colorado 2015-2017 Silverado 1500/2500/3500 (w/ 7" MyLink radio, RPO code: IOB) 2016-2017 Silverado 1500 2014-2017 Silverado 2500HD, 3500HD 2015-2017 Suburban 2015-2017 Tahoe 2015-2017 Ford Crown Victoria 1998-2011 Edge 2007-2010 Escape 2008-2012 Escape (w/ out sub) 2004-2007 Escape (seven-speaker system w sub) 2004-2007 Escape Hybrid 2004-2007 Escape 2001-2003 Excursion 2000-2005 Expedition 2007-2014 Expedition Non-NAV 2004-2006 Expedition with factory NAV 2004-2006 Expedition (late production) with factory NAV 2003 Expedition (late production) 2003 Expedition (early production) 2003 Expedition 1999-2002 Expedition (fleet) 2015 Expedition (SSV) 2015 Explorer 2005-2010 Explorer (Audiophile system w sub) 2004-2005 Explorer 2002-2003 Explorer Sport Trac 2001-2010 F-150 2004-2008 F-250/350/450/550 2017 F-250/350/450/550 (with 8.4-inch screen) 2013-2016 F-250/350/450/550 (without 8.4-inch screen) (with CD) 2013-2016 F-250/350/450/550 XL (without CD) 2013-2016 F-250/350/450/550 1999-2012 F-250 1998 F-650/750 (AM/FM/CD) 2016-2017 F-650/750 (AM/FM) 2016-2017 F-650/750 2000-2015 Focus (without MyFordTouch) 2012-2014 Focus 2000-2007 Focus (with Blaupunkt radio) 2003-2004 Freestar 2004-2007 Fusion 2006-2009 Mustang 2010-2014 Mustang (late 2008 build date) 2008-2009 Mustang (early 2008 build date) 2008 Mustang 2005-2007 Ranger 1998-2011 Taurus (without electronic controls) 2000-2007 Taurus (with electronic controls) 2000-2007 Thunderbird 2002-2005 Transit Connect 2010-2011 GMC Canyon (w/ 7" MyLink radio, RPO code: IOB) 2017 Canyon 2015-2017 Sierra 1500/2500/3500 (w/ 7" MyLink radio, RPO code: IOB) 2016-2017 Sierra 1500 2014-2017 Sierra 2500HD, 3500HD 2015-2017 Yukon / Yukon XL 2015-2016 Yukon Denali / Yukon XL Denali 2015-2016 Lincoln Aviator (with NAV) 2003-2005 Aviator (without NAV) 2003-2005 Mark LT 2005-2008 MKX (with NAV) 2007-2010 MKX (without NAV) 2007-2010 MKZ (with NAV) 2007-2009 MKZ (without NAV) 2007-2009 Navigator (with NAV) 2007-2014 Navigator (without NAV) 2003-2014 Navigator (with NAV) (w/ THX audio) 2003-2006 Navigator (with NAV) (w/o THX audio) 2003-2006 Navigator (early production) 2003 Navigator 1999-2002 Town Car (with NAV) 2003-2011 Town Car (without NAV) 2003-2011 Zephyr (with NAV) 2006 Zephyr (without NAV) 2006 Mazda B-Series Pickup 1998-2009 Mazda3 2004-2009 Tribute 2008-2011 Tribute 2001-2006 Mercury Grand Marquis 1998-2010 Marauder 2003-2004 Mariner 2005-2011 Monterey 2004-2007 Mountaineer 2006-2010 Mountaineer(Audiophile system w sub) 2004-2005 Mountaineer(system w/ out factory sub) 2004-2005 Mountaineer 2002-2003 Sable 2008-2009 Sable (no electronic controls) 2000-2006 Sable (electronic controls) 2000-2007 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-Series S-S40 4" 2-Way Coaxial Speakers & S-S65 6-1/2" Coaxial Speakers ALPINE S-S40 140 Watt 4" Coaxial 2-Way Car Audio Speakers   General Features: 4" S Series 2-way Coaxial Car Speakers Peak Power Handling: 280 watts per pair / 140 watts each RMS Power Handling: 90 watts per pair / 45 watts each Carbon Fiber cone material Rubber speaker surround 3/4" Silk Dome Tweeters Swivel application tweeters H.A.M.R surround Shallow mounting design Ferrite magnet motor structure Top-mount Depth: 1-3/4" Cutout Dimensions: 3-11/16" Impedance: 4 ohms Frequency Response: 97 - 22000 Hz Sensitivity: 86 dB Grilles not included Authorized Internet Dealer What's in the  S-S40 package: 2-way speakers 4x6 Adapter brackets 12" Lengths of speaker wire Eight 3/4" Screws Eight 5/16" Screws Eight 1/4" Screws 8 Speed clips 8 Spacers 2 Adhesive backed gaskets Warranty information Online product registration information Important Notice sheet Alpine S-S65 480W Max (160W RMS) 6.5" Type S Series 2-Way Coaxial Car Speakers   General Features: 6.5" S Series 2-way Coaxial Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each RMS Power Handling: 160 watts per pair / 80 watts each Carbon Fiber Reinforced Plastic cone material High Roll Foam speaker surround 1" Silk Dome Tweeters Neodymium magnet motor structure Top-mount Depth: 2.28" Cutout Dimensions: 5" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Grilles are sold separately Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S-S65 Package: S-S65 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws 8 Speed clips Warranty information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

ALPINE S-S40 140 Watt 4" Coaxial 2-Way Car Audio Speakers Alpine's been building quality car speakers for decades, and their latest S-Series S-S40 4" speakers are no exception. If you've been living with anemic factory sound, this step-up in range, tone definition, and power handling will make you giddy just about every time you hop behind the wheel. And if you're really jonesing for a boost in sound quality, hook them up to a powerful aftermarket stereo or amp for increased performance. Worthy materials Alpine's carbon-fiber-reinforced plastic woofer cones provide next-level sturdiness but are also agile enough to handle the complexities of the midrange. Their high amplitude multi-roll rubber surround contributes to reduced distortion for a cleaner sound, while silk dome tweeters give you all the precise details that bring out the character of the instruments and vocals. If you've never experienced Alpine sound quality, these speakers are a great place to start. Grilles are not included; the factory grilles should be suitable for most applications. General Features: 4" S Series 2-way Coaxial Car Speakers Peak Power Handling: 280 watts per pair / 140 watts each RMS Power Handling: 90 watts per pair / 45 watts each Carbon Fiber cone material Rubber speaker surround 3/4" Silk Dome Tweeters Swivel application tweeters H.A.M.R surround Shallow mounting design Ferrite magnet motor structure Top-mount Depth: 1-3/4" Cutout Dimensions: 3-11/16" Impedance: 4 ohms Frequency Response: 97 - 22000 Hz Sensitivity: 86 dB Grilles not included Authorized Internet Dealer What's in the  S-S40 package: 2-way speakers 4x6 Adapter brackets 12" Lengths of speaker wire Eight 3/4" Screws Eight 5/16" Screws Eight 1/4" Screws 8 Speed clips 8 Spacers 2 Adhesive backed gaskets Warranty information Online product registration information Important Notice sheet ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Soundstream AF.694 AF.52 Front and Rear Speaker upgrade package for 1994 - 2002 Dodge RAM 1500, 2500, and 2 Metra 72-1002 Soundstream AF.52 General features: 250W Peak 5.25" Arachnid Series 2-Way 4-ohm Coaxial Car Speakers 5.25" Arachnid Series 2-Way Car Speakers Power Handling: Peak: 250 watts per pair / 125 watts each RMS: 80 watts per pair / 40 watts each Injection-molded polypropylene cone Treated woven cloth surround 1" Balanced dome mylar tweeter 1" Voice coil on aluminum former 4 ohms impedance Frequency Response: 120-20,000 Hz Top-mount Depth: 2.25" Sensitivity: 90dB Soundstream AF.694 6"x9" 4-Way Speakers General features: 170W RMS 4 Ohm Arachnid Series 6x9" 4-Way Speakers (Pair) 6 x 9" Arachnid Series 4-way Car Speakers Power Handling: Peak: 500 watts per pair / 250 watts each RMS: 170 watts per pair / 85 watts each Recommended Power Range: 20 - 85 watts RMS per channel Polypropylene Cone Treated Woven Cloth Surround 1" Balanced Dome Mylar Tweeter 2" Balanced Dome Mylar Midrange 1" Aluminum Voice Coils Top-mount Depth: 3.25" 4-ohm impedance Sensitivity: 93 dB 2 pairs of Front/Rear Speaker Harness Connectors Quick and easy installation No cutting into original wires needed Plugs directly into the harness ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-S57 460W Max (150W RMS) 6x8/5x7" Type S Series 2-Way Coaxial Car Speakers IT FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a 5x7-inch component set to offer newer domestic trucks and cars the ability to upgrade their vehicle's sound quality. With its innovative technology, this component set is a simple solution to getting Alpine sound in many of these vehicles today. INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the generally weak cone areas. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 5"x7" S-Type Series TYPE Car Speakers/Component System Peak Power Handling: 460 watts per pair / 230 watts each RMS Power Handling: 150 watts per pair / 75 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 1.1" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2-11/32" Cutout Dimensions: 4-15/16" x 7-3/16" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the S-S57 package: S-S57 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

 Alpine S-S57 460W Max (150W RMS) 6x8/5x7" Type S Series 2-Way Coaxial Car Speakers IT FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a 5x7-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set makes it a simple solution to getting Alpine sound in many of these vehicles on the road today. INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 5"x7" S-Type Series TYPE Car Speakers/Component System Peak Power Handling: 460 watts per pair / 230 watts each RMS Power Handling: 150 watts per pair / 75 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 1.1" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2-11/32" Cutout Dimensions: 4-15/16" x 7-3/16" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the S-S57 package: S-S57 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-S65 480W Max (160W RMS) 6.5" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 6.5-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6.5" S Series 2-way Coaxial Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each RMS Power Handling: 160 watts per pair / 80 watts each Carbon Fiber Reinforced Plastic cone material High Roll Foam speaker surround 1" Silk Dome Tweeters Neodymium magnet motor structure Top-mount Depth: 2.28" Cutout Dimensions: 5" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Grilles are sold separately Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S-S65 Package: S-S65 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws 8 Speed clips Warranty information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-S65 6.5" 480 Watts S-Series Hi-Res Certified 2 Way Coaxial Car Speakers Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S65 6.5” Coaxial Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers, resulting in a more accurate and natural sound at an entry-level price point. Crafted with a unique combination of polyphylene, Glass Fiber, and Mica Cone materials, the S2-S65 is designed for lightweight construction, high output, and low distortion, giving you a clean and accurate audio experience. General Features: 6-1/2" 2-way Coaxial Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each Power Handling RMS: 160 watts per pair / 80 watts each Polypropylene cone material Rubber speaker surround High Amplitude Multi-Roll surround technology HI-RES Certified Optional Grills KTE-S65G available 1" Silk Dome Tweeters Ferrite magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 55 - 40000 Hz Sensitivity: 88 dB Authorized Internet Dealer Weight: ‎6.4 pounds Dimensions, ‎16.5 x 8.5 x 5 inches MFR #: S2-S65 1-year Manufacturer's Warranty What's in the S2-S65 package: Alpine S2-S65 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire  Eight 1-1/8" Screws Eight M4x6.5mm  Eight M4 Nuts 6 Flat washers 8 Speed clips Warranty information Online product registration information Important Notice sheet Declaration of conformity Template and specs on box Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine X-S65C 720W Max (240W RMS) 6.5" X-Series 2-Way Component Car Speakers If you've been an Alpine devotee from car to car, their X-Series speakers are your opportunity to take the leap to premium sound. Designed with a laser focus on superior imaging, this X-S65C 6-1/2" component speaker system will bring out the very best in your audio system. And an all-new magnet design in a cast aluminum frame allows these speakers to have a low profile, so they can fit in a wide array of vehicles. All about the build Alpine uses a powerful magnet and a super-efficient motor structure to make the 6-1/2" woofer really strong in the lower frequencies. The woofer cone itself uses a specialized fiber for extreme rigidity while Alpine's proprietary High Amplitude Multi-Roll surround ensures durability in the face of extreme temperatures. Serious power handling The separate 1" carbon graphite dome tweeter handles the high frequencies with satisfying accuracy, and its extended frequency response lends a sense of realism and atmosphere unmatched by lesser tweeters. Driven by an aftermarket amplifier, you'll really have a soaring system, thanks to power handling up to a whopping 120 watts RMS. General Features: 6.5 X-Type 2-Way Component System Power Handling: Max: 720 W per set/ 360 W per side RMS: 240 W per set/ 120 W per side Recommended power range: 10 - 120W RMS Hi-Res Audio compatible Nano-fiber woofer cone H.A.M.R. surround 1" carbon graphite tweeter Adjustable tweeter attenuation: 0dB, +3dB, -3dB Adjustable tweeter phase: Normal or reverse A-Pole type neodymium magnet Top-mount depth: 2-5/16" Cutout Dimensions: 5-13/32" 4 ohms impedance Frequency Response: 55 - 50,000 Hz Sensitivity: 89 dB Authorized Internet Dealer What is in the X-S65C package: 2 Woofers + 2 Woofer grilles 2 Grille badges 2 Tweeters (each has a 26" length of wire attached) 2 Tweeter grilles (installed) 2 Surface mount housings (with tweeters installed) Two tweeter crossovers (each has attached 32" input and 14" output wires) 2 Rectangular adhesive-backed pads (crossover) 2 Circular adhesive-backed discs (tweeter) Eight 1-1/8" Screws + Eight 5/8" Screws 8 Speed-clips + 4 Speed nuts Four 5" Zip ties Warranty information Important Notice Online product registration information Templates and specs on the box X-S65C owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.