00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream AR1-3000D Arachnid Series Monoblock Class D Car Stereo Subwoofer
$129.99
$209.98
Soundstream AR1-3000D Arachnid Series Monoblock Class D Car Stereo Subwoofer
Arachnid Amplifiers are the next step in performance and value. Taking advantage of our tried and true Class A/B Full Range and Improved Efficient Class-D Monoblock available platforms. Arachnid Series continues down the road of reliability and longevity you expect from us. Boosting a small electrical audio signal to a much higher voltage capable of driving speakers and subwoofers. Most vehicles’ standard systems can’t offer this high-power output that pushes your audio system to high volumes and precision like the Arachnid Series Amplifiers can.
General Features:
3,000W Monoblock Class D Arachnid Series Car Amplifier with Bass Remote
Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
Military Grade SMT PCB Maintains Dynamic Performance
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mV-6V Low Level/RCA Input w/ Bridged Operation Outputs
Barrier Strip Wire Terminals, 4g Power & 8g Speaker Outputs
Variable 12dB High Pass, Low Pass, & Subsonic Crossovers
12dB Bass Boost Increases Low Octave Harmonics
Dash Mount Gain Control Module Included
MAX Power: 3,000w
RMS Power 4Ω: 350 x 1
RMS Power 2Ω: 600 x 1
RMS Power 1Ω/4Ω Bridged: 1,000x 1 (1Ω)
Remote Gain Control: Included
Dimensions: 8.75” D x 2.25” H 12.25” W
3-Year Warranty Manufacture Warranty
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cerwin Vega B52 1000W Peak Stealth Bomber Series 2-Channel Class D Amplifier
$299.99
$419.99
Cerwin Vega B52 1000W Peak Stealth Bomber Series 2-Channel Class D Amplifier
General Features:
2-Channel Bomber Series Class D Amplifier
RMS Power Rating:
4 ohms: 200 watts x 2 chan.
2 ohms: 250 watts x 2 chan.
Bridged, 4 ohms: 500 watts x 1 chan.
Peak power output: 1000 watts
Class D IR Chipset with DirectFET Power Mosfet Output
Wired remote bass level control included
LED power and protection indicators
Two or Mono channel operation
Speaker-level (high-level) inputs
Ultra Compact High-Density Aluminum Alloy Chassis
3-way protection circuitry (thermal, overload, and short speaker protection)
Selectable turn-On modes: REM / DC / VOX
Input sensitivity: 200 mV - 10 V
Frequency Response: 10 - 33,000 Hz
Total Harmonic Distortion (THD): 0.25%
Signal to Noise Ration: 101.7 dBa
Selectable crossover mode: HP / Flat / LP
Variable low/high-pass filter: 40 - 400 Hz
Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Dimensions: 4.02"W x 6.61"L x 1.40"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-A60M 600W S-Series Monoblock Class-D Amplifier
$299.95
$280.00
Alpine S-A60M S-Series Monoblock Class-D Amplifier 600W RMSThe Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers.S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.General Features:
Alpine S-Series Mono Power Amplifier - S-A60M
RMS Power Output:
400W x 1 @ 4 Ohms (14.4V < 1% THD+N)
600W x 1 @ 2 Ohms (14.4V < 1% THD+N)
S/N ratio: >85dB (ref: 1W into 4 ohms), >105dB (ref: rated power into 4 ohms)
Remote bass knob compatible (requires RUX-KNOB.2, sold separately)
CTA-2006 compliant
THD+N ≤ 0.03% (ref 1W info 4 ohm)
Frequency Response: 10HZ-400Hz (+/- 3 dB)
Damping Factor: > 1000
variable low-pass filter (50-400 Hz, 24 dB/octave)
variable bass boost (0-12 dB at 50 Hz)
Speaker-level inputs (Speaker Wire to RCA Adapter Required)
Preamp Inputs
Improved heat sink and protection circuit design that eliminates thermal shut-down for dependable music playback
Remote Sensing automatic turn-on when using speaker-level inputs
Approximate Weight: 11 lbs
Fuse Rating: fuse rating: 30A x 2
Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select from our website when purchased together with this amplifier. Dimensions: 8” W x 8” H x 2.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the S-A60M package:
S-A60M owner's manual
Mono subwoofer amplifier
Two 30-amp ATO fuses (installed)
Four 3/4" Screws
2mm Allen wrench
Owner's manual
Alpine Verification Certificate
Online product registration information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream ST4.1200D Stealth 1200W 4Channel Class D Motorcycle Car Audio Amplifier
$138.99
$269.98
Soundstream ST4.1200D Stealth Series 1200W Channel Class D Motorcycle Car Audio Boats, ATVs, Side-by-Sides, Golf carts Amplifier
Don’t let these little monsters fool you. The latest and greatest of class D full-range technology allows us to pack 10 pounds of KICK YOUR ASS in less than 2-pound chassis. Once regarded as “dirty power”, class D's stable performance, thanks to high power capability, maximum efficiencies, and low tolerance components, rivals traditional full-range applications. Minimal power requirements, ultra-micro footprint, unbelievable sound quality, and easy installation make Stealth amplifiers great for any car, motorcycle, boat, or off-road vehicle…
Using an Original or Factory Radio? No Problem, this amplifier is equipped with an Automatic Hi-Level Signal Sensing Turn-On. No need to run a remote wire to turn it on, this amplifier will detect the signal and turn it on and off automatically. (Hi-Level Input only)
General Features:
Total power output: 1,200watts
2-Ohms: 150 Watts x 4 channels
4-Ohms: 100 Watts x 4 channels
4-Ohms/Bridged: 300 Watts x 2 channels
High-Efficiency Class D Full-Range Amplifiers
Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
2-ohm Stereo & 4-ohm Bridged Full-Range Operation
MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
Military Grade SMT PCB Maintains Dynamic Performance
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mV-12V High-Level or Low-Level RCA Input
Automatic Turn-On Hi-Level Signal Sensing
Quick Disconnect RCA/High-Level Wire Harness
Quick Disconnect Power and Speaker Output Harness
Variable 12dB High Pass, Low Pass, & Subsonic Crossovers
Amplifier Dimensions 3″W x 1.5″H x 7.75″W
Weight: 1.90lbs
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream TXP1.12000D 12,000 Watt Mono Amplifier 1-Ohm Car Stereo Amp
$259.99
$499.99
Soundstream TXP1.12000D 12,000 Watt Mono Amplifier 1-Ohm Car Stereo Amp
To beat the competition & be the loudest on the streets, you have to think smarter, buy smarter, & build smarter. To help you become that guy, Soundstream’s proud to introduce Tarantula XTREME POWER amplifiers. New to the Soundstream arsenal in Fall 2020, these robust Class D amplifiers produce massive power beyond your wildest dreams. Don’t let their size fool you, though; they pack a HUGE punch. Superefficient silicon steel core power supply transformers deliver high-current power on demand. While traditional toroidal transformers are compact & deliver clean, uncolored power for premium sound, silicon steel alloy core transformers pass far more current more efficiently. What does this mean for you? More power to your subwoofers & speakers without needing a truckload of batteries & industrial-size power wiring… Mind blown!
General Features:
Tarantula Series Class D 1 ohms Stable Monoblock Amplifier
RMS Power Rating: 4 ohms: 1,300 watts x 1 channel
RMS Power Rating: 2 ohms: 2,300 watts x 1 channel
RMS Power Rating: 1 ohm: 4,300 watts x 1 channel
Total RMS power output: 4,300 watts
Silicone Steel Alloy Core Power Supply Transformers & Flux Capacitors
Military Grade SMT PCB Maintains Dynamic Performance
LED Accent Lighting Illuminates Circuit Board
Wired remote bass level control included
Soft start turn-on
Direct Short, Thermal, & Overload Circuits Protect Amplifier
Input sensitivity: Low level: 200 - 6 volts
Frequency Response: 20 - 20,000 Hz
Total Harmonic Distortion (THD): 0.3%
Signal Noise Ratio: 105 dB
Variable low-pass filter: 80 - 20,000 Hz
Variable Bass Boost: 0 - 12 dB
8 AWG gauge power and ground wiring are recommended for installation.
Dimensions: 8.25" W x 7.25" L x 2.75" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
ALPINE KTA-450 400w 4-Channel Car Amplifier
$269.95
$350.00
Alpine KTA-450 4-Channel 200 Watt RMS Power Pack Amplifier Dynamic Peak Power (DPP) Technology
The KTA-450 features Alpine’s exclusive DPP technology which intelligently adjusts the gain to automatically adapt to musical needs. DPP prevents the amplifier from clipping music signals by supplying up to double the power to support rhythmic instruments that provide snappy sounds (like a snare drum, trumpet, or high-hat cymbals). During these dynamic musical passages, DPP instantly delivers bursts of power to rise to the peak demands of the music. The DPP technology boosts the KTA-450’s performance to 400 watts DPP, essentially doubling the amplifier’s power without increasing its size. Other Power Pack Amplifiers with the DPP technology are the KTA-30FW and KTA-30MW.
General Features:
Alpine KTA-450
Class D 4-channel Weather Resistant Power Pack Amplifier
CES 2019 Innovation Award Winner in the In-Vehicle Audio/Video category
Power Handling
50W RMS x 4 @ 4 Ohms
45W RMS x 4 @ 2 Ohms
Total Power Handling: 200W RMS
CTA-2006 compliant
Frequency Response: 15-50 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 83dB
Selectable high-pass filters (60, 80, 120 Hz at 12 dB/octave) on front and rear channels
Fuse Rating: 15A
Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs
Dimensions: 7” W x 3.5” H x 1.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the KTA-450 Package:
KTA-450 Package owner's manual
4-Channel amplifier
Wiring harness
Mounting plate
2 Mounting brackets
4 Wire-ties
4 Hex-head machine screws
2 Pan-head machine screws
4 Pan-head self-tapping screws
Warranty Information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate Prime R1200-1D Prime 1200 RMS Watts Monoblock Mono Amp 1 Channels D
$449.99
$679.99
Rockford Fosgate Prime R1200-1D 1200W RMS Prime Series Class-D Monoblock 1-Ohm Stable Amplifier
The PRIME R1200-1D is an ultra-efficient mono amplifier for cars and trucks that can produce 1,200 Watts into a 1-Ohm load without taxing the electrical system. The frequency response of the R1200-1D is optimized exclusively for use with subwoofers. The Prime R1200-1D subwoofer amplifier offers high efficiency through the implementation of its Class-D circuitry while delivering rich, full bass to any system. This car amplifier is optimized for subwoofers with the implementation of an infrasonic filter to keep those ultra-low (inaudible) bass notes from damaging your subwoofer system. Match with a 4-channel stereo amplifier for your mids/highs and you'll have a Rockford Fosgate system that any Car Audio Fanatic will envy.
General Features:
Rockford Fosgate Prime Series R1200-1D
Class-D 1-Ohm Stable Monoblock Amplifier
RMS Power Rating: 4 ohms: 400 watts x 1 channel
RMS Power Rating: 2 ohms: 800 watts x 1 channel
RMS Power Rating: 1 ohm: 1200 watts x 1 channel
CEA-2006 Compliant Amplifier
Pulse Width Modulated MOSFET power supply
Wired remote bass level control included
LED power (green) and protect (red) indicators
Soft start turn-on
Nickel-plated RCA level inputs
Nickel-plated screw terminals
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Heavy-duty aluminum alloy heat-sink for extreme heat dissipation
Input sensitivity: 150mV - 4V
Frequency Response: 20 - 250Hz
Total Harmonic Distortion (THD): <1.0%
Signal to Noise Ratio: 100dB
Variable low-pass filter: 50 - 250 Hz, 12 dB/octave
Subsonic (infrasonic) filter: 15 - 40 Hz , 12 dB/octave
Variable Bass Boost: 0 to +18 dB bass boost at 45 Hz
Fuse Rating: 150A x 1 (recommended, not included)
12 AWG speaker wire gauge outputs
4 gauge power and ground wiring is recommended for installation
Weight: 7.825 lbs
Dimensions: 11.06"W x 6.77"L x 1.97"H
Also Found As Prime 1200 Watt, R12001D, R1200, R12001
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Hifonics BE35-800.4 35th Anniversary Brutus Elite Class A/B 4-Channel Amplifier
$209.99
$299.99
Hifonics BE35-800.4 35th Anniversary Brutus Elite Class A/B 4-Channel Amplifier
The Hifonics BE35-800.4 is a 4-channel car audio amplifier, part of the Brutus Elite 35th Anniversary series. It features Class A/B topology and delivers 800 watts of peak power.
General Features:
Amplifier Class: Super A/B
Channels: 4-Channel
Peak Power: 800 Watts
RMS Power Output:
100 watts x 4 channels @ 4 ohms
200 watts x 4 channels @ 2 ohms
400 watts x 2 channels (bridged) @ 4 ohms
Crossover: Accu-Cross, with variable high-pass and low-pass filters
Bass Boost: Variable from 0 to +10 dB at 50 Hz
Pre-amp Circuitry: Low-noise design
Input/Output: Tiffany-style RCA connectors and nickel-plated output connections
Protection: 4-way system protection circuitry (thermal, overload, DC, speaker short protection)
Other features include an Illuminated Hifonics logo and angled connectors for easier installation
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Hifonics GE-1400.4 1400 Watts Gemini Elite 4-Channel Amplifier
$179.99
$349.99
Hifonics GE-1400.4 1400 Watts Gemini Elite 4-Channel Amplifier
General Features:
Power – This Class A/B 1400 Watt Car Amplifier has a power rating distribution as follows: 350 watts x 4 @ 2 ohms, 175 watts x 4 @ 4 ohms. The 4-channel amplifier for car speakers also provides a 2-way protection circuitry as part of its design.
Features – The four channel bass boost car amplifier has features like - Frequency Response: 10-22KHZ, Bass Boost, Remote Bass Knob, 2-way protection, variable low pass crossover: 40Hz-300Hz, variable high pass crossover: 40Hz-300Hz, subsonic filter:10Hz-40Hz, phase shift:0-180 degree, and ultra-fi mosfet power supply
Class A/B – This multichannel subwoofer car amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, a Class A Amplifier has a high amount of current flowing in its output, while a Class B amplifier has no current flowing.
Quality - This Class A/B 4-channel car amplifier boasts a high-quality frequency response and crossover network, which positions it in a prominent place. Durable design and high-efficiency performance make this subwoofer amplifier for car speakers stand out among the others.
RCA Ports - The RCA Jacks in this bass boost car amplifier allow you to develop multiple amplifier systems without using any splitter cords. The subwoofer amplifier thus puts you at ease, as you only need to bring one set into the first amp and then use the line-out RCA jack to feed the next amp.
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Hifonics HCC-1700.4 1700W Peak Class AB COLOSSUS Series 4 Channel Car Amplifier
$209.99
$299.99
Hifonics HCC-1700.4 1700W Peak Class AB COLOSSUS Series 4 Channel Car Amplifier
General Features:
Class A/B 2-ohm Stable 4-Channel Amplifier
RMS Power Rating:
4 ohm: 225 watts x 4 channel
2 ohm: 425 watts x 4 channel
Bridged: 850 watts x 2 channel @ 4 ohm
Total power output: 1700 watts
LED Power/Protect Light
Signal sensing remote turn-on
Thermal, overload, and speaker short protection
Low-noise preamplifier circuit with minimal distortion
Nickel-plated high-temperature impact and erosion resistant
Four-channel, full-range, bridgeable operation mode
Variable electronic crossover type
Pro-Fi Ultra-Fi MOSFET output device technology
An aluminum heat sink for superior heat generation
Secure molded connection terminal for all connections
Input sensitivity: 0.2 - 9 volts
Frequency Response: 10 - 22000 Hz
Total Harmonic Distortion (THD): 0.5%
Variable low-pass filter: 30 - 2500 Hz
Fuse Rating: 100A
4 AWG gauge power and ground wiring is recommended for installation.
Dimensions: 10.75" W x 20" L x 4.5" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Hifonics HCC-3000.1D 3000W RMS COLOSSUS Series Class-D Monoblock Amplifier
$329.99
$599.99
Hifonics HCC-3000.1D 3000W RMS COLOSSUS Series Class-D Monoblock Amplifier
Hifonics COLOSSUS Classic Mono subwoofer audio amplifier delivers 3000 watts with Super D Class technology, featuring Ultra-Fi MOSFET outputs selected for both balance and output power.
General Features:
COLOSSUS Series Class D 1 ohm Stable Monoblock Amplifier
RMS Power Rating:
4 ohm: 750 watts x 1 channel
2 ohm: 1500 watts x 1 channel
1 ohm: 3000 watts x 1 channel
Total RMS power output: 3000 watts
Designed and engineered in the USA
LED Power/Protect Light
Wired bass level remote control included
Ultra-Fi™ MOSFET
Heavy-duty aluminum alloy heat sink
Dual-coil Pulse Width Modulated power supply
High-temperature impact-resistant
High-speed microprocessors with proprietary D/A conversion algorithms
The mono output of the pre-amp outputs
Signal sensing remote turn-on
Protection circuitry (thermal, overload, and speaker short protection)
Maximum low voltage signal
Input sensitivity:
Low level: 0.2 - 9 volts
Frequency Response: 10 - 500 Hz
Total Harmonic Distortion (THD): <0.1%
Variable low-pass filter: 30 - 250 Hz
Subsonic filter: 15 - 35 Hz
Variable Bass Boost: 0 - 10 dB
Fuse Rating: 250A
4 AWG gauge amplifier wiring kit is recommended for installation
Dimensions: 18.5" L x 11.25" W x 2.5" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Hifonics HCC-4200.1D 4200W Peak Class D COLOSSUS Series Monoblock Car Amplifier with Bass Remote
$399.99
$499.99
Hifonics HCC-4200.1D 4200W Peak Class D COLOSSUS Series Monoblock Car Amplifier with Bass Remote
Hifonics COLOSSUS Classic Mono subwoofer audio amplifier delivers 4200 watts with Super D Class technology, featuring Ultra-Fi MOSFET outputs selected for both balance and output power.
General Features:
COLOSSUS Series Class D 1 ohm Stable Monoblock Amplifier
RMS Power Rating:
4 ohm: 1000 watts x 1 channel
2 ohm: 2100 watts x 1 channel
1 ohm: 4200 watts x 1 channel
Total power output: 4200 watts
LED Power/Protect Light
Wired bass level remote control included
Thermal, overload, and speaker short protection
Low-noise preamplifier circuit with minimal distortion
Nickel-plated RCA jacks to resist corrosion
Variable electronic crossover type
An electronic equalizer to tailor specific frequencies
Super D-Class designs and high-speed microprocessor
Pro-Fi Output Device Technology: The Ultra-Fi MOSFET
Heavy-duty aluminum alloy heat sink
Dual-coil Pulse Width Modulated power supply
High-temperature impact-resistant nickel-plated connectors
Secure molded connection terminal for all connections
Phase 0-180 degrees: Bass drum attack, snap requires phase
Input sensitivity: 0.2 - 9 volts
Frequency Response: 10 - 500 Hz
Total Harmonic Distortion (THD): 0.1%
Variable low-pass filter: 30 - 250 Hz
Subsonic filter: 15 - 35 Hz
Variable Bass Boost: 0 - 10 dB
Fuse Rating: 300A
4 AWG gauge amplifier wiring kit is recommended for installation
Dimensions: 22.75" L x 10.75" W x 4.5" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
Warning:This product can expose you to chemicals known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.