All Car Amplifiers (528)

Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier This new BBX amplifier gives you Alpine power performance at a fantastic price. It is designed to fit easily in virtually any system. This amp delivers high-output power and exceptional performance for its class. It is a great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. With Bass EQ, you can maximize your system's performance and get even more powerful bass. General Features: Alpine BBX-T600 Class-A/B 2-ohm Stable 2-Channel Amplifier 50 Watts @ 4 Ohm x 2 Channel 70 Watts @ 2 Ohm x 2 Channel 130 Watts @ 4 Ohm x 1 Channel Bridged Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on Two or Mono channel operation One pair of preamp outputs to connect multiple amplifiers 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 95dB Variable high-pass filter: 80 - 1200 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 20A x 1 Dimensions: 9.84"W x 9.44"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Weight: 5.00lbs What's in the BBX-T600 package: BBX-T600 owner's manual Two-channel amplifier Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega B52 1000W Peak Stealth Bomber Series 2-Channel Class D Amplifier General Features: 2-Channel Bomber Series Class D Amplifier RMS Power Rating: 4 ohms: 200 watts x 2 chan. 2 ohms: 250 watts x 2 chan. Bridged, 4 ohms: 500 watts x 1 chan. Peak power output: 1000 watts Class D IR Chipset with DirectFET Power Mosfet Output Wired remote bass level control included LED power and protection indicators Two or Mono channel operation Speaker-level (high-level) inputs Ultra Compact High-Density Aluminum Alloy Chassis 3-way protection circuitry (thermal, overload, and short speaker protection) Selectable turn-On modes: REM / DC / VOX Input sensitivity: 200 mV - 10 V Frequency Response: 10 - 33,000 Hz Total Harmonic Distortion (THD): 0.25% Signal to Noise Ration: 101.7 dBa Selectable crossover mode: HP / Flat / LP Variable low/high-pass filter: 40 - 400 Hz Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Dimensions: 4.02"W x 6.61"L x 1.40"H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-A60M S-Series Monoblock Class-D Amplifier 600W RMSThe Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers.S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.General Features: Alpine S-Series Mono Power Amplifier - S-A60M RMS Power Output: 400W x 1 @ 4 Ohms (14.4V < 1% THD+N) 600W x 1 @ 2 Ohms (14.4V < 1% THD+N) S/N ratio: >85dB (ref: 1W into 4 ohms), >105dB (ref: rated power into 4 ohms) Remote bass knob compatible (requires RUX-KNOB.2, sold separately) CTA-2006 compliant THD+N ≤ 0.03% (ref 1W info 4 ohm) Frequency Response: 10HZ-400Hz (+/- 3 dB) Damping Factor: > 1000 variable low-pass filter (50-400 Hz, 24 dB/octave) variable bass boost (0-12 dB at 50 Hz) Speaker-level inputs (Speaker Wire to RCA Adapter Required) Preamp Inputs Improved heat sink and protection circuit design that eliminates thermal shut-down for dependable music playback Remote Sensing automatic turn-on when using speaker-level inputs Approximate Weight: 11 lbs Fuse Rating: fuse rating: 30A x 2 Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select from our website when purchased together with this amplifier. Dimensions: 8” W x 8” H x 2.25” D Authorized Dealer 1-year Manufacturer's Warranty What's in the S-A60M package: S-A60M owner's manual Mono subwoofer amplifier Two 30-amp ATO fuses (installed) Four 3/4" Screws 2mm Allen wrench Owner's manual Alpine Verification Certificate Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ORION CBA REMOTE Cobalt Amplifier Bass Knob Replacement Are you looking for the perfect bass knob replacement for your COBALT Amplifier? Look no further! This amazing product ensures your audio experience remains exceptional, and you can tweak your bass levels effortlessly. Whether you're a professional musician or an audiophile enthusiast, you know how crucial it is to have the right gear, and your COBALT Amplifier is no exception. But even the top-notch equipment needs occasional upgrades, and that’s where our bass knob replacement comes in.CBA Remote - Cobalt Amplifier Bass Knob Replacement - Orion Car Audio With our bass knob replacement, you can easily adjust the low frequencies to suit your listening preferences. Maybe you love the thumping beats of a bass-heavy track, or you prefer a more subtle, balanced sound. Either way, this replacement knob makes it all possible. It's designed to be a perfect fit for your COBALT Amplifier, so installation is a breeze – no need to worry about complicated steps or inadequate fitting. One of the standout features of our bass knob replacement is its durability. Made from high-quality materials, it's built to last, ensuring that your amplifier performs at its best for years to come. And while durability is critical, aesthetics also matter. This replacement knob boasts a sleek, stylish design that complements your COBALT Amplifier’s look, adding a touch of sophistication to your audio setup. So why should you choose our bass knob replacement? Simply put, it enhances your listening experience in ways that are both significant and subtle. Because we understand that every detail counts, we’ve crafted this product to meet the highest standards of audio quality and usability. Whether you’re dialing up the bass for a live performance or fine-tuning your stereo system, you’ll appreciate the smooth, responsive control this knob provides. As you can see, the bass knob replacement for the COBALT Amplifier is more than just a spare part – it's a crucial element of your sound system. It allows you to customize your audio experience with precision and style. So don't settle for anything less than the best. Get your bass knob replacement today and take your COBALT Amplifier to the next level! Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine R2-A60F R-Series Hi-Res 4 Channel 600 Watt Class D Car Audio Amplifier & Absolute KIT4 4 Gauge / 2000 Watt Complete Amplifier Hookup Installation Kit Bundle Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback. The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance. General Features: R-Series Class D 2 ohms Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 100 watts x 4 channel RMS Power Rating: 2 ohms: 150 watts x 4 channel RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms Total power output: 600 watts LED Power/Protect Light Signal sensing remote turn-on Hi-Res Certified CTA-2006 compliant Low level: 0.2 - 4 volts Input sensitivity High level: .5 - 10 volts Input sensitivity Frequency Response: 10 - 45000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 80 dB Variable high-pass filter: 50 - 6,000 Hz Variable low-pass filter: 50 - 400 Hz Fuse Rating: 60A 4 AWG gauge amplifier wiring kit is recommended for installation Dimensions: 11.12" L x 6.92" W x 2.14" H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2-A60F Package: Alpine R2-A60F owner's manual 4-Channel amplifier (2 installed 30A ATO fuses) Four 1" pan-head screws 3mm Allen key 2.5mm Allen key 2mm Allen key Alpine Verification Certificate Warranty information Power supply note Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Soundstream ST4.1200D Stealth Series 1200W Channel Class D Motorcycle Car Audio Boats, ATVs, Side-by-Sides, Golf carts Amplifier Don’t let these little monsters fool you. The latest and greatest of class D full-range technology allows us to pack 10 pounds of KICK YOUR ASS in less than 2-pound chassis. Once regarded as “dirty power”, class D's stable performance, thanks to high power capability, maximum efficiencies, and low tolerance components, rivals traditional full-range applications. Minimal power requirements, ultra-micro footprint, unbelievable sound quality, and easy installation make Stealth amplifiers great for any car, motorcycle, boat, or off-road vehicle… Using an Original or Factory Radio? No Problem, this amplifier is equipped with an Automatic Hi-Level Signal Sensing Turn-On. No need to run a remote wire to turn it on, this amplifier will detect the signal and turn it on and off automatically. (Hi-Level Input only) General Features: Total power output: 1,200watts 2-Ohms: 150 Watts x 4 channels 4-Ohms: 100 Watts x 4 channels 4-Ohms/Bridged: 300 Watts x 2 channels High-Efficiency Class D Full-Range Amplifiers Hybrid Aluminum Alloy Heatsink for Optimum Dissipation 2-ohm Stereo & 4-ohm Bridged Full-Range Operation MOSFET Power Supply w/ Audiophile Grade IRTM Transistors Military Grade SMT PCB Maintains Dynamic Performance Direct Short, Thermal, & Overload Circuits Protect Amplifier 200mV-12V High-Level or Low-Level RCA Input Automatic Turn-On Hi-Level Signal Sensing Quick Disconnect RCA/High-Level Wire Harness Quick Disconnect Power and Speaker Output Harness Variable 12dB High Pass, Low Pass, & Subsonic Crossovers Amplifier Dimensions 3″W x 1.5″H x 7.75″W Weight: 1.90lbs ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Soundstream TXP1.12000D 12,000 Watt Mono Amplifier 1-Ohm Car Stereo Amp To beat the competition & be the loudest on the streets, you have to think smarter, buy smarter, & build smarter. To help you become that guy, Soundstream’s proud to introduce Tarantula XTREME POWER amplifiers. New to the Soundstream arsenal in Fall 2020, these robust Class D amplifiers produce massive power beyond your wildest dreams. Don’t let their size fool you, though; they pack a HUGE punch. Superefficient silicon steel core power supply transformers deliver high-current power on demand. While traditional toroidal transformers are compact & deliver clean, uncolored power for premium sound, silicon steel alloy core transformers pass far more current more efficiently. What does this mean for you? More power to your subwoofers & speakers without needing a truckload of batteries & industrial-size power wiring… Mind blown! General Features: Tarantula Series Class D 1 ohms Stable Monoblock Amplifier RMS Power Rating: 4 ohms: 1,300 watts x 1 channel RMS Power Rating: 2 ohms: 2,300 watts x 1 channel RMS Power Rating: 1 ohm: 4,300 watts x 1 channel Total RMS power output: 4,300 watts Silicone Steel Alloy Core Power Supply Transformers & Flux Capacitors Military Grade SMT PCB Maintains Dynamic Performance LED Accent Lighting Illuminates Circuit Board Wired remote bass level control included Soft start turn-on Direct Short, Thermal, & Overload Circuits Protect Amplifier Input sensitivity: Low level: 200 - 6 volts Frequency Response: 20 - 20,000 Hz Total Harmonic Distortion (THD): 0.3% Signal Noise Ratio: 105 dB Variable low-pass filter: 80 - 20,000 Hz Variable Bass Boost: 0 - 12 dB 8 AWG gauge power and ground wiring are recommended for installation. Dimensions: 8.25" W x 7.25" L x 2.75" H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Crunch Ground Pounder PZ2-2030.4D POWERZONE 2000 Watt Amplifier 4-Channel Car Audio Amplifier.  POWER ZONE four-channel amplifier highlighted with aggressive heatsink elements feature high-level inputs utilizing SPEED-FET output devices and QTD Technology produces 2000 watts of power in a four-channel application. General Features: Weight 3.8 lbs Dimensions 12 × 7 × 3.25 in Compatible Vehicles Universal Amp Class Class D Amp Total Channels 4 Amp Max Power (watts) 2000 Amp Power @ 2 Ohms (ch x watts) 4 x 250 Amp Power @ 4 Ohms (ch x watts) 4 x 500 Amp Mono Bridged @ 4 Ohms (ch x watts) 2 x 1000 Amp Crossover Variable Electronic 12dB Per Octave Amp Variable High Pass Crossover 12dB per Octave 40Hz-400Hz Amp Variable Low Pass Crossover 12dB per Octave 40Hz-400Hz Amp Tone Control / Parametric EQ Built-in Bass Control Amp Variable Voltage 0.2-6V Amp Frequency Response 10Hz-22kHz Amp Total Harmonic Distortion (THD) < 0.5% Amp Speaker Level Audio Inputs: Yes Pre-amp Audio Outputs Full Range, RCA Amp Power Terminal 12v/GND 4 AWG Amp Speaker Terminal Wire Gauge 12 AWG Amp Fusing External 60A Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

AUTOTEK MM-3020.1D 3000W Max Mean Machine Series 1 ohm Stable Monoblock Class-D Amplifier w/ Bass Knob Included Product Details:  Autotek Mean Machine MM3020.1D Class-D 1 ohm Stable Monoblock Amplifier RMS Power Rating: Total power output: 3000 watts Pulse Width Modulated MOSFET power supply Wired remote bass level control included LED power (green) and protection (red) indicators Soft start turn-on Monochannel operation Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat sink Input sensitivity: Frequency Response: 15 - 150 Hz Total Harmonic Distortion (THD): <0.10% Signal Noise Ratio: >95 dB Variable low-pass filter: 40 - 300 Hz, 12 dB/octave Subsonic filter: 10 - 40 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 80A x 1 4-gauge power and ground wiring is recommended for installation.  Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTA-450 4-Channel 200 Watt RMS Power Pack Amplifier Dynamic Peak Power (DPP) Technology The KTA-450 features Alpine’s exclusive DPP technology, which automatically adjusts the gain to meet musical needs. DPP prevents the amplifier from clipping music signals by supplying up to double the power to support rhythmic instruments that provide snappy sounds (like a snare drum, trumpet, or high-hat cymbals). During these dynamic musical passages, DPP instantly delivers bursts of power to rise to the peak demands of the music. The DPP technology enhances the KTA-450’s performance to 400 watts, essentially doubling the amplifier’s power without increasing its size. Other Power Pack amplifiers featuring DPP technology include the KTA-30FW and KTA-30MW. General Features: Alpine KTA-450 Class D 4-channel Weather-Resistant Power Pack Amplifier CES 2019 Innovation Award Winner in the In-Vehicle Audio/Video category Power Handling 50W RMS x 4 @ 4 Ohms 45W RMS x 4 @ 2 Ohms Total Power Handling: 200W RMS CTA-2006 compliant Frequency Response: 15-50 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 83dB Selectable high-pass filters (60, 80, 120 Hz at 12 dB/octave) on front and rear channels Fuse Rating: 15A Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to adapt to musical needs automatically Dimensions: 7” W x 3.5” H x 1.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the KTA-450 Package: KTA-450 Package owner's manual 4-Channel amplifier Wiring harness Mounting plate 2 Mounting brackets 4 Wire-ties 4 Hex-head machine screws 2 Pan-head machine screws 4 Pan-head self-tapping screws Warranty Information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.