00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream AR1-3000D Arachnid Series Monoblock Class D Car Stereo Subwoofer
$129.99
$209.98
Soundstream AR1-3000D Arachnid Series Monoblock Class D Car Stereo Subwoofer
Arachnid Amplifiers are the next step in performance and value. Taking advantage of our tried and true Class A/B Full Range and Improved Efficient Class-D Monoblock available platforms. Arachnid Series continues down the road of reliability and longevity you expect from us. Boosting a small electrical audio signal to a much higher voltage capable of driving speakers and subwoofers. Most vehicles’ standard systems can’t offer this high-power output that pushes your audio system to high volumes and precision like the Arachnid Series Amplifiers can.
General Features:
3,000W Monoblock Class D Arachnid Series Car Amplifier with Bass Remote
Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
Military Grade SMT PCB Maintains Dynamic Performance
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mV-6V Low Level/RCA Input w/ Bridged Operation Outputs
Barrier Strip Wire Terminals, 4g Power & 8g Speaker Outputs
Variable 12dB High Pass, Low Pass, & Subsonic Crossovers
12dB Bass Boost Increases Low Octave Harmonics
Dash Mount Gain Control Module Included
MAX Power: 3,000w
RMS Power 4Ω: 350 x 1
RMS Power 2Ω: 600 x 1
RMS Power 1Ω/4Ω Bridged: 1,000x 1 (1Ω)
Remote Gain Control: Included
Dimensions: 8.75” D x 2.25” H 12.25” W
3-Year Warranty Manufacture Warranty
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cerwin Vega B52 1000W Peak Stealth Bomber Series 2-Channel Class D Amplifier
$299.99
$419.99
Cerwin Vega B52 1000W Peak Stealth Bomber Series 2-Channel Class D Amplifier
General Features:
2-Channel Bomber Series Class D Amplifier
RMS Power Rating:
4 ohms: 200 watts x 2 chan.
2 ohms: 250 watts x 2 chan.
Bridged, 4 ohms: 500 watts x 1 chan.
Peak power output: 1000 watts
Class D IR Chipset with DirectFET Power Mosfet Output
Wired remote bass level control included
LED power and protection indicators
Two or Mono channel operation
Speaker-level (high-level) inputs
Ultra Compact High-Density Aluminum Alloy Chassis
3-way protection circuitry (thermal, overload, and short speaker protection)
Selectable turn-On modes: REM / DC / VOX
Input sensitivity: 200 mV - 10 V
Frequency Response: 10 - 33,000 Hz
Total Harmonic Distortion (THD): 0.25%
Signal to Noise Ration: 101.7 dBa
Selectable crossover mode: HP / Flat / LP
Variable low/high-pass filter: 40 - 400 Hz
Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Dimensions: 4.02"W x 6.61"L x 1.40"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-A60M 600W S-Series Monoblock Class-D Amplifier
$299.95
$280.00
Alpine S-A60M S-Series Monoblock Class-D Amplifier 600W RMSThe Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers.S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.General Features:
Alpine S-Series Mono Power Amplifier - S-A60M
RMS Power Output:
400W x 1 @ 4 Ohms (14.4V < 1% THD+N)
600W x 1 @ 2 Ohms (14.4V < 1% THD+N)
S/N ratio: >85dB (ref: 1W into 4 ohms), >105dB (ref: rated power into 4 ohms)
Remote bass knob compatible (requires RUX-KNOB.2, sold separately)
CTA-2006 compliant
THD+N ≤ 0.03% (ref 1W info 4 ohm)
Frequency Response: 10HZ-400Hz (+/- 3 dB)
Damping Factor: > 1000
variable low-pass filter (50-400 Hz, 24 dB/octave)
variable bass boost (0-12 dB at 50 Hz)
Speaker-level inputs (Speaker Wire to RCA Adapter Required)
Preamp Inputs
Improved heat sink and protection circuit design that eliminates thermal shut-down for dependable music playback
Remote Sensing automatic turn-on when using speaker-level inputs
Approximate Weight: 11 lbs
Fuse Rating: fuse rating: 30A x 2
Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select from our website when purchased together with this amplifier. Dimensions: 8” W x 8” H x 2.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the S-A60M package:
S-A60M owner's manual
Mono subwoofer amplifier
Two 30-amp ATO fuses (installed)
Four 3/4" Screws
2mm Allen wrench
Owner's manual
Alpine Verification Certificate
Online product registration information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream ST4.1200D Stealth 1200W 4Channel Class D Motorcycle Car Audio Amplifier
$138.99
$269.98
Soundstream ST4.1200D Stealth Series 1200W Channel Class D Motorcycle Car Audio Boats, ATVs, Side-by-Sides, Golf carts Amplifier
Don’t let these little monsters fool you. The latest and greatest of class D full-range technology allows us to pack 10 pounds of KICK YOUR ASS in less than 2-pound chassis. Once regarded as “dirty power”, class D's stable performance, thanks to high power capability, maximum efficiencies, and low tolerance components, rivals traditional full-range applications. Minimal power requirements, ultra-micro footprint, unbelievable sound quality, and easy installation make Stealth amplifiers great for any car, motorcycle, boat, or off-road vehicle…
Using an Original or Factory Radio? No Problem, this amplifier is equipped with an Automatic Hi-Level Signal Sensing Turn-On. No need to run a remote wire to turn it on, this amplifier will detect the signal and turn it on and off automatically. (Hi-Level Input only)
General Features:
Total power output: 1,200watts
2-Ohms: 150 Watts x 4 channels
4-Ohms: 100 Watts x 4 channels
4-Ohms/Bridged: 300 Watts x 2 channels
High-Efficiency Class D Full-Range Amplifiers
Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
2-ohm Stereo & 4-ohm Bridged Full-Range Operation
MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
Military Grade SMT PCB Maintains Dynamic Performance
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mV-12V High-Level or Low-Level RCA Input
Automatic Turn-On Hi-Level Signal Sensing
Quick Disconnect RCA/High-Level Wire Harness
Quick Disconnect Power and Speaker Output Harness
Variable 12dB High Pass, Low Pass, & Subsonic Crossovers
Amplifier Dimensions 3″W x 1.5″H x 7.75″W
Weight: 1.90lbs
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream TXP1.12000D 12,000 Watt Mono Amplifier 1-Ohm Car Stereo Amp
$259.99
$499.99
Soundstream TXP1.12000D 12,000 Watt Mono Amplifier 1-Ohm Car Stereo Amp
To beat the competition & be the loudest on the streets, you have to think smarter, buy smarter, & build smarter. To help you become that guy, Soundstream’s proud to introduce Tarantula XTREME POWER amplifiers. New to the Soundstream arsenal in Fall 2020, these robust Class D amplifiers produce massive power beyond your wildest dreams. Don’t let their size fool you, though; they pack a HUGE punch. Superefficient silicon steel core power supply transformers deliver high-current power on demand. While traditional toroidal transformers are compact & deliver clean, uncolored power for premium sound, silicon steel alloy core transformers pass far more current more efficiently. What does this mean for you? More power to your subwoofers & speakers without needing a truckload of batteries & industrial-size power wiring… Mind blown!
General Features:
Tarantula Series Class D 1 ohms Stable Monoblock Amplifier
RMS Power Rating: 4 ohms: 1,300 watts x 1 channel
RMS Power Rating: 2 ohms: 2,300 watts x 1 channel
RMS Power Rating: 1 ohm: 4,300 watts x 1 channel
Total RMS power output: 4,300 watts
Silicone Steel Alloy Core Power Supply Transformers & Flux Capacitors
Military Grade SMT PCB Maintains Dynamic Performance
LED Accent Lighting Illuminates Circuit Board
Wired remote bass level control included
Soft start turn-on
Direct Short, Thermal, & Overload Circuits Protect Amplifier
Input sensitivity: Low level: 200 - 6 volts
Frequency Response: 20 - 20,000 Hz
Total Harmonic Distortion (THD): 0.3%
Signal Noise Ratio: 105 dB
Variable low-pass filter: 80 - 20,000 Hz
Variable Bass Boost: 0 - 12 dB
8 AWG gauge power and ground wiring are recommended for installation.
Dimensions: 8.25" W x 7.25" L x 2.75" H
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
ALPINE KTA-450 400w 4-Channel Car Amplifier
$199.95
$350.00
Alpine KTA-450 4-Channel 200 Watt RMS Power Pack Amplifier Dynamic Peak Power (DPP) Technology
The KTA-450 features Alpine’s exclusive DPP technology which intelligently adjusts the gain to automatically adapt to musical needs. DPP prevents the amplifier from clipping music signals by supplying up to double the power to support rhythmic instruments that provide snappy sounds (like a snare drum, trumpet, or high-hat cymbals). During these dynamic musical passages, DPP instantly delivers bursts of power to rise to the peak demands of the music. The DPP technology boosts the KTA-450’s performance to 400 watts DPP, essentially doubling the amplifier’s power without increasing its size. Other Power Pack Amplifiers with the DPP technology are the KTA-30FW and KTA-30MW.
General Features:
Alpine KTA-450
Class D 4-channel Weather Resistant Power Pack Amplifier
CES 2019 Innovation Award Winner in the In-Vehicle Audio/Video category
Power Handling
50W RMS x 4 @ 4 Ohms
45W RMS x 4 @ 2 Ohms
Total Power Handling: 200W RMS
CTA-2006 compliant
Frequency Response: 15-50 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 83dB
Selectable high-pass filters (60, 80, 120 Hz at 12 dB/octave) on front and rear channels
Fuse Rating: 15A
Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs
Dimensions: 7” W x 3.5” H x 1.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the KTA-450 Package:
KTA-450 Package owner's manual
4-Channel amplifier
Wiring harness
Mounting plate
2 Mounting brackets
4 Wire-ties
4 Hex-head machine screws
2 Pan-head machine screws
4 Pan-head self-tapping screws
Warranty Information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier
$119.99
$259.90
Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier
This new BBX amplifier gives you Alpine power performance at a fantastic price. It is designed to fit easily in virtually any system. This amp delivers high-output power and exceptional performance for its class. It is a great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. With Bass EQ, you can maximize your system's performance and get even more powerful bass.
General Features:
Alpine BBX-T600
Class-A/B 2-ohm Stable 2-Channel Amplifier
50 Watts @ 4 Ohm x 2 Channel
70 Watts @ 2 Ohm x 2 Channel
130 Watts @ 4 Ohm x 1 Channel Bridged
Total power output: 600 watts
Pulse Width Modulated MOSFET power supply
LED power (green) and protect (red) indicators
Soft start turn-on
Two or Mono channel operation
One pair of preamp outputs to connect multiple amplifiers
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity: .2V - 8V
Frequency Response: 5 - 50000 Hz
Total Harmonic Distortion (THD): <1%
Signal Noise Ratio: 95dB
Variable high-pass filter: 80 - 1200 Hz
Variable low-pass filter: 50 - 500 Hz
Variable Bass Boost: 0 to +12 dB bass boost
Fuse Rating: 20A x 1
Dimensions: 9.84"W x 9.44"L x 2"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
Weight: 5.00lbs
What's in the BBX-T600 package:
BBX-T600 owner's manual
Two-channel amplifier
Owner's manual (English/ French/ Spanish)
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate Prime R1200-1D Prime 1200 RMS Watts Monoblock Mono Amp 1 Channels D
$449.99
$679.99
Rockford Fosgate Prime R1200-1D 1200W RMS Prime Series Class-D Monoblock 1-Ohm Stable Amplifier
The PRIME R1200-1D is an ultra-efficient mono amplifier for cars and trucks that can produce 1,200 Watts into a 1-Ohm load without taxing the electrical system. The frequency response of the R1200-1D is optimized exclusively for use with subwoofers. The Prime R1200-1D subwoofer amplifier offers high efficiency through the implementation of its Class-D circuitry while delivering rich, full bass to any system. This car amplifier is optimized for subwoofers with the implementation of an infrasonic filter to keep those ultra-low (inaudible) bass notes from damaging your subwoofer system. Match with a 4-channel stereo amplifier for your mids/highs and you'll have a Rockford Fosgate system that any Car Audio Fanatic will envy.
General Features:
Rockford Fosgate Prime Series R1200-1D
Class-D 1-Ohm Stable Monoblock Amplifier
RMS Power Rating: 4 ohms: 400 watts x 1 channel
RMS Power Rating: 2 ohms: 800 watts x 1 channel
RMS Power Rating: 1 ohm: 1200 watts x 1 channel
CEA-2006 Compliant Amplifier
Pulse Width Modulated MOSFET power supply
Wired remote bass level control included
LED power (green) and protect (red) indicators
Soft start turn-on
Nickel-plated RCA level inputs
Nickel-plated screw terminals
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Heavy-duty aluminum alloy heat-sink for extreme heat dissipation
Input sensitivity: 150mV - 4V
Frequency Response: 20 - 250Hz
Total Harmonic Distortion (THD): <1.0%
Signal to Noise Ratio: 100dB
Variable low-pass filter: 50 - 250 Hz, 12 dB/octave
Subsonic (infrasonic) filter: 15 - 40 Hz , 12 dB/octave
Variable Bass Boost: 0 to +18 dB bass boost at 45 Hz
Fuse Rating: 150A x 1 (recommended, not included)
12 AWG speaker wire gauge outputs
4 gauge power and ground wiring is recommended for installation
Weight: 7.825 lbs
Dimensions: 11.06"W x 6.77"L x 1.97"H
Also Found As Prime 1200 Watt, R12001D, R1200, R12001
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate PM600X4 Punch Marine 600 Watt 4-Channel Amplifier
$649.99
$899.99
Rockford Fosgate PM600X4 Punch Marine 600 Watt 4-Channel Amplifier
The Punch PM600X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allows for precise tuning of Bass frequencies and the Pass-Thru RCA jacks provide flexibility as your system grows and keeping Y-adapters to a minimum.
FEATURES AT A GLANCE
Features C.L.E.A.N. Set-up
RCA pass-thru outputs
12dB/octave Butterworth crossover
Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
On-board Punch EQ with +18dB boost @ 45Hz
High level input capable with Auto Turn-On circuit
Cast aluminum heatsink
Over current protection
Stealth top mounted control panel
Muted turn on
Marine grade two part epoxy coating on circuit boards
Marine grade stainless steel hardware
Short circuit protection
2-Year Warranty
Number of Channels: 4
Total Power(Sum of Rated Power): 600 Watts
Rated Power (RMS Continuous Power)
75 Watts x 4 @ 4-Ohm
150 Watts x 4 @ 2-Ohm
300 Watts x 2 @ 4-Ohm Bridged
Dynamic Power
(PVC/PowerCube®)
129 Watts x 4 @ 4-Ohms 0° Res
211 Watts x 4 @ 2-Ohms 0° Res
Bridgeable
Yes
Frequency Response
20Hz to 20kHz +/- 1.0dB
Input Sensitivity
150 mV - 12 V
Circuit Topology Class
Class A/B
Efficiency (average)
68% @ 4-Ohm
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%
Signal Input
Hi/Low level: 2 RCA pair
Signal Output
Low level: 1 RCA pair
Tone Controls
Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Front Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Rear Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
Function depends upon LP/AP/HP switch position
Crossover Controls
Front/Rear High-Pass (HP): 50Hz-250Hz @ 12dB/octave Butterworth
Front/Rear Low-Pass (HP): 50Hz-250Hz 12dB/octave Butterworth
All-Pass: Yes
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate PM400X4 Punch Marine 400 Watt 4-Channel Amplifier
$519.99
$799.99
Rockford Fosgate PM400X2 Punch Marine 400 Watt 4-Channel Amplifier
The PM400X4 is perfect for 4-way front-stage/rear-fill or 3-way front-stage/subwoofer systems. Simply drop a pair of component speakers on the front channels and subs on the rear and BOOM - you got "The PUNCH." With its flexible design, the PM400X4 is an excellent amplifier choice for virtually any vehicle.
FEATURES AT A GLANCE
Features C.L.E.A.N. Set-up
12dB/octave Butterworth crossover
Over current protection
Muted turn on
On-board Punch EQ with +18dB boost @ 45Hz
High level input capable with Auto Turn-On circuit
Cast aluminum heatsink
Stealth top mounted control panel
Short circuit protection
Marine grade two part epoxy coating on circuit boards
Marine grade stainless steel hardware
2-Year Warranty
Number of Channels: 4
Total Power (Sum of Rated Power): 400 Watts
Rated Power
(RMS Continuous Power)
50 Watts x 4 @ 4-Ohm
100 Watts x 4 @ 2-Ohm
200 Watts x 2 @ 4-Ohm Bridged
Dynamic Power
(PVC/PowerCube®)
82 Watts x 4 @ 4-Ohm
137 Watts x 4 @ 2-Ohm
266 Watts x 2 @ 4-Ohm Bridged
Bridgeable: Yes
Frequency Response: 20Hz to 20kHz +/- 1.0dB
Input Sensitivity: 150 mV - 12 V
Circuit Topology Class: Class A/B
Efficiency (average): 67% @ 4-Ohm
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%
Signal Input: Hi/Low level: 2 RCA pair
Signal Output
Tone Controls: Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Front Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Rear Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
Function depends upon LP/AP/HP switch position
Crossover Controls
Front High-Pass/Low-Pass (HP/LP): 50Hz-250Hz @ 12dB/octave Butterworth
Rear High-Pass/Low-Pass (HP/LP): 50Hz-250Hz @ 12dB/octave Butterworth
All-Pass: Yes
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate PM300X2 Punch Marine 300 Watt 2-Channel Amplifier
$349.99
$699.99
Rockford Fosgate PM300X2 Punch Marine 300 Watt 2-Channel Amplifier
The PM300X2 is a solid choice if you're looking to drive a pair of coaxial speakers, component speakers, or a single subwoofer. The amplifier can also be run in stereo/mono mode simultaneously when using passive crossovers (not supplied) on all speakers. With proven PUNCH technology, the PM300X2 delivers real Rockford Fosgate power from a small design and is flexible to accommodate any moderately sized system.
FEATURES AT A GLANCE
Features C.L.E.A.N. Set-up
RCA pass-thru outputs
On-board Punch EQ with +18dB boost @ 45Hz
Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
High level input capable with Auto Turn-On circuit
Cast aluminum heatsink
2-Year Warranty
Over current protection
12dB/octave Butterworth crossover
Marine grade two part epoxy coating on circuit boards
Marine grade stainless steel hardware
Muted turn on
Short circuit protection
Stealth top mounted control panel
Number of Channels: 2
Total Power (Sum of Rated Power): 300 Watts
Rated Power (RMS Continuous Power)
100 Watts x 2 @ 4-Ohm
150 Watts x 2 @ 2-Ohm
300 Watts x 1 @ 4-Ohm Bridged
Dynamic Power (PVC/PowerCube®)
120 Watts x 2 @ 4-Ohms 0° Res
203 Watts x 2 @ 2-Ohms 0° Res
Bridgeable: Yes
Frequency Response: 20Hz-20kHz
Input Sensitivity: 150 mV - 12 V
Circuit Topology Class: Class A/B
Efficiency (average): 69% @ 4-Ohm
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%
Signal Input: Hi/Low Level: 1 RCA Pair
Signal Output: Low Level: 1 RCA Pair
Tone Controls
0dB to +14dB @ 12.5kHz
0dB to +18dB @ 45Hz
Crossover Controls
High-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth
Low-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth
All-Pass: Yes
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate PM1000X1DB 1000 Watts Punch marine/powersports mono amplifier
$689.99
$899.99
Rockford Fosgate PM1000X1DB 1000 Watts Punch marine/powersports mono amplifier
A powerful amp made for powersports
Rockford Fosgate built their PM1000X1bd mono amplifier for marine, motorcycle, and powersport applications. If you demand powerful bass while you're blasting along a trail or waterway, this compact amp has all the power you needRockford Fosgate PM1000X1bd
The PM1000X1bd features a conformal-coated circuit boardBoost your bass wherever you go
Ultra-efficient Class-bd circuit topology helps the PM1000X1bd deliver maximum bang for your buck. This versatile amp will operate safely with loads as low as 1 ohm, so you can send up to 1000 watts RMS to a single dual voice coil sub or to a multi-sub setup.Made for long life and easy installation
Product highlights:
mono subwoofer amplifier
300 watts RMS x 1 at 4 ohms (1000 watts peak)
500 watts RMS x 1 at 2 ohms
1000 watts RMS at 1 ohm
CEA-2006 compliant
Class BD amp technology
conformal-coated circuit board — suitable for power sports and marine applications
marine-grade stainless steel hardware
variable low-pass filter (50-250 Hz, 12 dB/octave)
speaker-level inputs (speaker wire to RCA adapter required)
frequency response: 20-250 Hz
built-in Punch EQ with +18dB boost @ 45Hz.
fuse rating: 140A x 1 (fuse not included)
C.L.E.A.N. set-up technology with LED input/output indicators
hidden top-mount control panel
dimensions: 13-3/8"W x 2-7/16"H x 8-13/16"D
What's in the PM1000X1BD shipping:
Rockford Fosgate PM1000X1BD owner's manualIf you need assistance accessing this owner's manual, please give us a call.
Mono subwoofer amplifier
2.5mm Allen wrench
Four 1-1/2" Self-tapping screws
Setup guide
Certificate of Performance Verification
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.