All Car Amplifiers (475)

Diamond Audio MICRO82U 2-Channel 500W RMS Full Range Class D Amplifier GENERAL INFORMATION Diamond Audio continues to break new dimensions by introducing the MICRO8U series of amplifiers for 2018. Following in the footsteps of the highly popular MICRO series amplifiers, the big-brother MICRO8U series packs more power and performance! 150W x 4CH + 350W @ 2Ω / 80W x 4CH + 200W @ 4Ω Input Sensitivity: 0.2-10 Volt Crossover Filter : Fixed 75Hz (HPF) 12dB Per Octave Slope ( CH1/CH2/CH3/CH4 ) 40-400Hz, 12dB Per Octave Slope ( CH5/CH6/CH7/CH8 ) Frequency Response: 10-33KHz Selectable REM / VOX / DC Turn On Modes Selectable 2CH / 5CH Input Modes Independent Front & Rear & Sub Inputs Dimensions: 10.45” x 4.02” x 1.4” (265.6 x 100.11 x 35.56 mm) Disconnected RCA Input & Speaker Output (Front & Rear). Harness Kits Included ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio MICRO82U 2-Channel 500W RMS Full Range Class D Amplifier Diamond Audio continues to break new dimensions by introducing the MICRO8U series of amplifiers for 2018. Following in the footsteps of the highly popular MICRO series amplifiers, the big-brother MICRO8U series packs more power and performance! General Features: Micro Series Class D 2 ohm Stable 4-Channel Amplifier 4 Ohm RMS Power Rating: 85 watts x 4 channel 2 Ohm RMS Power Rating: 125 watts x 4 channel Total RMS power output: 660 watts LED Power/Protect Light Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) DirectFET Power MOSFET output stage SMD technology on a 4-layer glass PC board Conformal-coated PCB assembly for added water resistance The ICAD circuit provides superior overload protection Variable 12dB crossovers Input sensitivity: 200 mV - 10 volts Frequency Response: 10 - 30000 Hz Total Harmonic Distortion (THD): 0.5% Signal to Noise Ratio: -85 dB Variable high-pass filter: 40 - 400 Hz Variable low-pass filter: 40 - 400 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 40A 8-AWG gauge amplifier wiring kit is recommended for installation Dimensions: 9.0" L x 4.06" W x 1.52" H Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio MICRO82U 2-Channel 500W RMS Full Range Class D Amplifier Diamond Audio continues to break new dimensions by introducing the MICRO8U series of amplifiers for 2018. Following in the footsteps of the highly popular MICRO series amplifiers, the big-brother MICRO8U series packs more power and performance! 250W x 4CH @ 2Ω / 150W x 2CH @ 4Ω / 500W x 1CH @ 4Ω Bridged RMS Power Output Input Sensitivity: 0.2-10 Volt Crossover Filter: 40-400Hz (LPF), 24dB Per Octave Slope Frequency Response: 10-33KHz Selectable REM / VOX / DC Turn-On Modes Dimensions: 9” x 4.06” x 1.52” / 228.6 x 103 .124x 38.608 mm Remote Bass Knob Included Disconnected RCA Input Harness Kits Included ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio MICRO81U 1-Channel Full Range Class D Sub Amplifier GENERAL FEATURES  Diamond Audio continues to break new dimensions by introducing the MICRO8U amplifiers. Following in the footsteps of the highly popular MICRO series amplifiers, the big-brother MICRO8U series packs more power and performance! Power Output: 300W RMS x 1CH @ 2Ω / 175W RMS x 1CH @ 4Ω Input Sensitivity: 0.2-10 Volt Crossover Filter: 40-400Hz (LPF), 24dB Per Octave Slope Frequency Response: 10-350Hz Selectable REM / VOX / DC Turn-On Modes Dimensions: 9" x 4.06" x 1.52" (228.6 x 103.124 x 38.608 mm) Remote Bass Knob Included Disconnected RCA Input Harness Kits Included ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Diamond Audio DES1000.5D 5-Channel 1000W RMS Full Range Class D Amplifier Introducing the Diamond Elite DES Series Amplifiers – our flagship line that has set the standard since its debut last year. Engineered and designed from the ground up, these amplifiers are more compact than previous generations while maintaining consistent footprint dimensions across all models. This meticulous design ensures the Diamond Elite DES Series amplifiers deliver even more dynamic sound and optimal rated power at all impedance levels. Each amplifier in the Diamond Elite DES Series boasts advanced features, including multiple switched speaker-level turn-on options (VOX/DC Offset/REM) and the latest digital chipset technology. These innovations offer unparalleled installation flexibility and the precise controls necessary to fine-tune and enhance the sound quality of any car audio system. General Features: Diamond Audio Elite Series Class D 2 ohm Stable 5-Channel Amplifier 4 Ohms RMS Power Rating: 90 watts x 4 channel + 150 watts x 2 channel 2 Ohms RMS Power Rating: 150 watts x 4 channel + 250 watts x 1 channel Bridged Power Rating: 300 watts x 2 channel + 500 watts x 1 channel @ 4 ohm Total power output: 1100 watts LED Power/Protect Light Surface mount component technology with 4-layer PCB Compact size with single-sided connections Speaker-level (high-level) inputs via direct connection of speaker wire to low-level inputs Switched speaker level turn on options (Vox/DC Offset/Rem) Input sensitivity Frequency Response: 10 - 350 Hz Total Harmonic Distortion (THD): 0.03% Signal to Noise Ratio: -76.7 dB Variable high-pass filter: 35 - 350 Hz Variable low-pass filter: 35 - 350 Hz Variable Bass Boost: 0 - 12 dB Fuse Rating: 40A x 3  4 AWG gauge power and ground wiring is recommended for installation. Dimensions: 7.67" W x 12.6" L x 2" H Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

  Diamond Audio DES1000.1D DES 1-Channel Full Range Class D Amplifier Diamond Elite DES series amplifiers have been our work horse ever since its introduction. It was engineered and designed from the ground up. Smaller than the previous generation and constructed with the same footprint dimensions for all models, these amplifiers have been engineered to sound even more dynamic and to deliver optimal rated power at all impedance levels! A ll Diamond Elite DES series amplifiers feature various switched speaker level turn on options (VOX/DC Offset/REM), utilize the latest digital chipset technology, and provides installation flexibility and all the controls necessary to fine-tune and improve the sound quality of any car audio system. General Features 800X1 @ 4Ω RMS 1000X1 @ 2Ω and 1Ω RMS S/N: < -100dBA Dimensions: (Remote Included): 11.81" x 2" x 7.25" (300mm x 50.8mm x 185mm) Latest High-Efficiency Full Range Digital Topology Surface Mount Component Technology with 4-Layer PCB Common Compact Size with Single-Sided Connections and Top Mount Controls Handles HI and LO level input up to 12V Switched Speaker Level Turn On Options (VOX/DC Offset/REM) Remote Bass Level Control Included Fully Variable 35Hz - 350Hz 12dB per Octave Crossovers 0 -180 Degrees of Phase adjustment Bass Boost EQ Up To 12dB ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DES500.1D DES 1-Channel Full Range Class D Amplifier Diamond Elite DES series amplifiers have been our workhorse since their introduction last year when it was engineered and designed from the ground up. Smaller than the previous generation and constructed with the same footprint dimensions for all models, these amplifiers have been engineered to sound even more dynamic and to deliver optimal rated power at all impedance levels! An ll Diamond Elite DES series amplifiers feature various switched speaker level turn-on options (VOX/DC Offset/REM), utilize the latest digital chipset technology, and provide installation flexibility and all the controls necessary to fine-tune and improve the sound quality of any car audio system. General Features Latest High-Efficiency Full-Range Digital Topology Surface Mount Component Technology with 4-Layer PCB Common Compact Size with Single-Sided Connections and Top Mount Controls Handles HI and LO level input up to 12V Switched Speaker Level Turn On Options (VOX/DC Offset/REM) Remote Bass Level Control Included Fully Variable 35Hz - 350Hz 12dB per Octave Crossovers 0 -180 Degrees of Phase adjustment Bass Boost EQ Up To 12dB ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Diamond Audio DES400.4D 4-Channel Full Range Class D Amplifier General Features Diamond Elite Series Class D 2 ohm Stable 4-Channel Amplifier 4 Ohms RMS Power Rating: 140 watts x 4 channel 2 Ohms RMS Power Rating: 170 watts x 4 channel Bridged Power Rating: 400 watts x 2 channel @ 4 ohm Total power output: 800 watts LED Power/Protect Light Surface mount component technology with 4-layer PCB Compact size with single-sided connections Speaker-level (high-level) inputs via direct connection of speaker wire to the low-level inputs Switched speaker level turn on options (Vox/DC Offset/Rem) Input sensitivity Frequency Response: 10 - 35000 Hz Total Harmonic Distortion (THD): 0.07% Signal to Noise Ratio: -77.4 dB Variable low-pass filter: 35 - 350 Hz Fuse Rating: 60A 8 AWG gauge amplifier wiring kit is recommended for installation Dimensions: 9.3" L x 5.27" W x 1.75" H Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio DES400.2D 2-Channel Full Range Class D Diamond Elite DES series amplifiers have been our workhorses since their introduction last year, when they were engineered and designed from the ground up. Smaller than the previous generation and constructed with the exact footprint dimensions for all models, these amplifiers have been engineered to sound even more dynamic and to deliver optimal rated power at all impedance levels! All Diamond Elite DES series amplifiers feature various switched speaker-level turn-on options (VOX/DC Offset/REM), utilize the latest digital chipset technology, and provide installation flexibility along with all the controls necessary to fine-tune and improve the sound quality of any car audio system. General Features: 120 W x 4 @ 4Ω 185 W x 4 @ 2Ω 370 W x 2 @ 4Ω bridged S/N: ≤ 95 dBA / THD: .06% Dimensions: (Remote Included): 8.75" x 7.67" x 2" (222 x 195 x 51.5 mm) Anodized Extruded Aluminum Heat Sink Provides Superior Thermal Performance 4-Layer PCB Board with Balanced Differential Inputs Full Range Class D IR Chipset "SNAP" Capacitors used throughout the Circuit Audiophile Grade High Tolerance Components Spring Steel FET Clips Provide a Cleaner Board Design Illuminated Logo / Fully Concealed Mounting Output Clip Indicators for Precise Set-Up Fine-Tuned Fully Variable Crossovers and Phase Control Top Mounted Controls for Convenient Amplifier Adjustment Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Diamond Audio HX480.4 4-Channel 480W RMS Full Range Class D AmplifierAudiophile-grade high tolerance components - 4-layer PCB board with balanced differential inputs - full-range digital class-d Ir chip sets - fine-tuned variable - crossover and phase control- top mounted controls for convenient amplifier adjustment turn to hex series amplifiers for superior sound quality and unparalleled power for the ultimate audiophile system set up. Composed of high-tolerance grade components and tuning adjustments to fit your listening desires, hex series amplifiers are the choice for those who expect the best! General Features: 120 W x 4 @ 4Ω 185 W x 4 @ 2Ω 370 W x 2 @ 4Ω bridged S/N: ≤ 95 dBA / THD: .06% Dimensions: (Remote Included): 8.75" x 7.67" x 2" (222 x 195 x 51.5 mm) Anodized Extruded Aluminum Heat Sink Provides Superior Thermal Performance 4-Layer PCB Board with Balanced Differential Inputs Full Range Class D IR Chipset "SNAP" Capacitors used Throughout the Circuit Audiophile Grade High Tolerance Components Spring Steel FET Clips Provide a Cleaner Board Design Illuminated Logo / Fully Concealed Mounting Output Clip Indicators for Precise Set-Up Fine Tuned Fully Variable Crossovers and Phase Control Top Mounted Controls for Convenient Amplifier Adjustment ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio HX1200.1D HEX Series Monoblock Class-D Car Audio Amplifier + Absolute KIT0 0 Gauge Amplifier It is introducing the all-new range of Diamond Audio HEX series amplifiers, made for ultimate sound quality and performance. It features a four-layer glass epoxy circuit board, top-mounted controls, and a brushed copper look exterior, making it great for a show car. General Features: Anodized Extruded Aluminum Heat Sink provides superior thermal performance 4-Layer PCB Board with balanced differential inputs Full Range Class D IR Chipset "Snap" capacitors are used throughout the circuit Audiophile Grade High Tolerance Components Spring Steel FET Clips provide a cleaner board design Illuminated logo / fully concealed mounting Output clip indicators for precise setup Fine-tuned fully variable crossovers and phase control Top-mounted controls for convenient amplifier adjustment Monoblock Class-D Amplifier RMS Power Rating: 4 Ohm: 540 watts x 1 Channel RMS Power Rating: 2 Ohm: 870 watts x 1 Channel RMS Power Rating: 1 Ohm: 1200 watts x 1 Channel Frequency Response: 10Hz - 300Hz Variable Low-Pass Filter (12dB/Octave): 30Hz - 300Hz Variable Sub-Sonic Filter (12dB/Octave): 10Hz - 55Hz Top Mounted Controls Anodized Extruded Aluminum Heat Sink 4-Layer PCB Board Balanced Differential Inputs Illuminated Logo Dimensions: 14.2" (362mm) x 7.67" (195mm) x 2" (51.5mm) 1-Year Warranty What is Included? One (1) Diamond Audio HX1200.1D HEX Series Monoblock Class-D Car Audio Amplifier ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio HX800.1D HEX Mono 800W RMS Class D Subwoofer Amplifier. Audiophile-grade high tolerance components - 4-layer PCB board with balanced differential inputs - full-range digital class-d Ir chip sets - fine-tuned variable - crossover and phase control- top mounted controls for convenient amplifier adjustment turn to hex series amplifiers for superior sound quality and unparalleled power for the ultimate audiophile system set up. Composed of high-tolerance grade components and tuning adjustments to fit your listening desires, hex series amplifiers are the choice for those who expect the best! General Features RMS Power Rating: 340 W x 1 @ 4Ω RMS Power Rating: 560 W x 1 @ 2Ω RMS Power Rating: 800 W x 1 @ 1Ω S/N: ≤ 95 dBA / THD: .06% Dimensions: (Remote Included): 9.92" x 7.67" x 2" (252 x 195 x 51.5 mm) Anodized Extruded Aluminum Heat Sink Provides Superior Thermal Performance 4-Layer PCB Board with Balanced Differential Inputs Full Range Class D IR Chipset "SNAP" Capacitors used Throughout the Circuit Audiophile Grade High Tolerance Components Spring Steel FET Clips Provide a Cleaner Board Design Illuminated Logo / Fully Concealed Mounting Output Clip Indicators for Precise Set-Up Fine Tuned Fully Variable Crossovers and Phase Control Top Mounted Controls for Convenient Amplifier Adjustment ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.