All Alpine Speakers (362)

Alpine R2-S65 (R2S65) 300W MAX 100W RMS R-Series 6-1/2" 2-way Car Speakers TURN IT UP WITHOUT TURNING DOWN SOUND QUALITY If you play your music loud and want others to know, the R-Series speakers are the match for you. You will enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. MORE OUTPUT FOR MORE FUN The woofers have a large, 35-millimeter (mm) voice coil, which allows for more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling for superior control and output. The R-Series speakers incorporate Alpine’s patented High-Amplitude Multi-Roll Surround (H.A.M.R.) for control and accuracy. The component models use a crossover with an in-line, passive design and a reduced footprint, which contributes to more straightforward installation. General Features: 6.5" R-Series 2-way Coaxial Car Speakers carbon-fiber-reinforced polymer (CFRP) woofer Peak Power Handling: 600 watts per pair / 300 watts each RMS Power Handling: 200 watts per pair / 100 watts each Glass Fiber cone material Rubber HAMR Surround Composite Basket Hi-Res Audio Certified 1" Magnesium Hard Dome Tweeters CEA-2031 compliant: Yes Ferrite magnet motor structure Top-mount Depth: 2.48" Cutout Dimensions: 5.31" Impedance: 4 ohms Frequency Response: 65 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the R2-S65 package: R2-S65 owner's manual Two 2-way Speakers Two multi-purpose adapter rings 2 Grilles 8 Speed clips Warranty information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A36F S-Series Class-D 4-Channel Car Amplifier & 2 Pairs Alpine S2-S80C - Next-Generation S-Series 8" Component Speaker Set 2 Pairs Alpine S2-S80C - Next-Generation S-Series 8" Component Speaker Set General Features: 8" 2-way component speaker system 8" polypropylene/glass-fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing In-line crossovers for easier installation frequency range: 50-40,000 Hz Peak Power Handling:  520 watts per set / 260 watts on each side RMS Power Handling: 170 watts per set / 85 watts on each side Rubber speaker surround High Amplitude Multi-Roll surround technology Ferrite magnet motor structure Impedance: 4 ohms Sensitivity: 80 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine S2-A36F 600W Next Generation S-Series Hi-Res Class-D 4-Channel Car Amplifier General Features: Hi-Res Audio Certified (Up to 40kHz) Power Rating: 14.4V, < 0.3% THD +N Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω Bridged Power: 180W RMS x 2 @ 4Ω 4-Channel Amplifier Alpine’s Class D Amplifier Circuit Two-sided terminal layout Built-in Selectable/ Adjustable Crossovers Mid-Bass EQ Input for more power Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Dimensions: 8.7” W x 2.25” H x 8.25” D Weight: 4 lbs, 13 oz S/N Ratio: >83dB Frequency Response: 20Hz – 40kHz Damping Factor: >100 Owner’s Manual 4 Self-tapping screws Hexagon wrench Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

Alpine S2-A36F S-Series Class-D 4-Channel Car Amplifier & Alpine S2-S80C - Next-Generation S-Series 8" Component Speaker Set Alpine S2-S80C - Next-Generation S-Series 8" Component Speaker Set General Features: 8" 2-way component speaker system 8" polypropylene/glass-fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing In-line crossovers for easier installation frequency range: 50-40,000 Hz Peak Power Handling:  520 watts per set / 260 watts on each side RMS Power Handling: 170 watts per set / 85 watts on each side Rubber speaker surround High Amplitude Multi-Roll surround technology Ferrite magnet motor structure Impedance: 4 ohms Sensitivity: 80 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine S2-A36F 600W Next Generation S-Series Hi-Res Class-D 4-Channel Car Amplifier General Features: Hi-Res Audio Certified (Up to 40kHz) Power Rating: 14.4V, < 0.3% THD +N Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω Bridged Power: 180W RMS x 2 @ 4Ω 4-Channel Amplifier Alpine’s Class D Amplifier Circuit Two-sided terminal layout Built-in Selectable/ Adjustable Crossovers Mid-Bass EQ Input for more power Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Dimensions: 8.7” W x 2.25” H x 8.25” D Weight: 4 lbs, 13 oz S/N Ratio: >83dB Frequency Response: 20Hz – 40kHz Damping Factor: >100 Owner’s Manual 4 Self-tapping screws Hexagon wrench Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

Alpine UTE-73BT Mech-Less Digital Bluetooth Media Receiver with 2 Pair Alpine S2-S80C Type S 8" Component Speakers  Alpine UTE-73BT In-Dash Digital Media Receiver with Bluetooth and Pandora Control Do you store your music on your smartphone? The UTE-73BT supports various file formats, including those streamed from a phone, digital player, Pandora account, or USB drive. General Features: Bluetooth and Pandora In-Dash Digital Media Receiver Peak Power Handling:50watts x 4 channels RMS Power Handling:18watts x 4 channels Pandora Link integrates your car stereo with your iPhone and Pandora Internet Radio Detachable faceplate White LCD text fluorescent display Wireless remote control sold separately Blue button lighting CEA-2006 compliant amplifier iPod USB cable included AM/FM tuner with 12FM/6 AM presets Local/Distance Tuning: Allows the stereo to only tune to strong signals or to allow both strong and distant weak signals 3-Band parametric equalizer with seven selectable tone curves (6 Preset, 1 User) Variable high-pass filter:60Hz,80Hz,120Hz,160Hz, or Off Variable low-pass filter:60Hz,80Hz,120Hz,160Hz, or Off iTunes Tagging lets you tag and download songs you hear on satellite radio Loudness: Will bring out the high and low frequencies to compensate for the ear's decreased sensitivity at lower volumes Audio Mute allows you to lower the volume by 20db instantly Authorized Internet Dealer 2 Alpine S2-S80C - Next-Generation S-Series 8" Component Speaker Set General Features: 8" 2-way component speaker system 8" polypropylene/glass-fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing In-line crossovers for easier installation frequency range: 50-40,000 Hz Peak Power Handling:  520 watts per set / 260 watts on each side RMS Power Handling: 170 watts per set / 85 watts on each side Rubber speaker surround High Amplitude Multi-Roll surround technology Ferrite magnet motor structure Impedance: 4 ohms Sensitivity: 80 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

2 Pair Alpine S2-S80C - Next-Generation S-Series 8" Component Speaker Set Unparalleled Performance: The S2-S80C is meticulously crafted using a unique combination of polypropylene, Glass Fiber, and Mica Cone materials. This construction ensures lightweight design, high output, and low distortion, resulting in a clean and precise audio experience that exceeds expectations. Enhanced Bass Response: Immerse yourself in powerful and accurate bass notes thanks to the integration of Alpine's exclusive High Amplitude Multi-Roll (HAMR) surround technology. This innovation enables maximum cone movement, delivering deep and impactful low-frequency performance. Versatile Tweeter Design: The S2-S80C includes 1" tweeters with threaded removable housing, allowing for flexible placement and easy customization of the speaker setup. Achieve optimal sound staging and imaging by adjusting the tweeters to suit your listening preferences. Seamless Integration: With an 8" woofer size, in-line crossovers, and OEM fitment, the S2-S80C component speaker set offers seamless integration into your vehicle's audio system. Experience an upgrade in sound quality while maintaining a factory-like appearance. General Features: 8" 2-way component speaker system 8" polypropylene/glass-fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing in-line crossovers for easier installation frequency range: 50-40,000 Hz Peak Power Handling:  520 watts per set / 260 watts on each side RMS Power Handling: 170 watts per set / 85 watts on each side Rubber speaker surround High Amplitude Multi-Roll surround technology Ferrite magnet motor structure Impedance: 4 ohms Sensitivity: 80 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the S2-S80C package: S2-S80C owner's manual 2 Woofers 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Warranty information Online product registration information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

Alpine UTE-73BT Mech-Less Digital Bluetooth Media Receiver with 1 Pair Alpine S2-S80C Type S 8" Component Speakers  Alpine UTE-73BT In-Dash Digital Media Receiver with Bluetooth and Pandora Control Do you store your music on your smartphone? The UTE-73BT supports various file formats, including those streamed from a phone, digital player, Pandora account, or USB drive. General Features: Bluetooth and Pandora In-Dash Digital Media Receiver Peak Power Handling:50watts x 4 channels RMS Power Handling:18watts x 4 channels Pandora Link integrates your car stereo with your iPhone and Pandora Internet Radio Detachable faceplate White LCD text fluorescent display Wireless remote control sold separately Blue button lighting CEA-2006 compliant amplifier iPod USB cable included AM/FM tuner with 12FM/6 AM presets Local/Distance Tuning: Allows the stereo to only tune to strong signals or to allow both strong and distant weak signals 3-Band parametric equalizer with seven selectable tone curves (6 Preset, 1 User) Variable high-pass filter:60Hz,80Hz,120Hz,160Hz, or Off Variable low-pass filter:60Hz,80Hz,120Hz,160Hz, or Off iTunes Tagging lets you tag and download songs you hear on satellite radio Loudness: Will bring out the high and low frequencies to compensate for the ear's decreased sensitivity at lower volumes Audio Mute allows you to lower the volume by 20db instantly Authorized Internet Dealer Alpine S2-S80C - Next-Generation S-Series 8" Component Speaker Set General Features: 8" 2-way component speaker system 8" polypropylene/glass-fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing In-line crossovers for easier installation frequency range: 50-40,000 Hz Peak Power Handling:  520 watts per set / 260 watts on each side RMS Power Handling: 170 watts per set / 85 watts on each side Rubber speaker surround High Amplitude Multi-Roll surround technology Ferrite magnet motor structure Impedance: 4 ohms Sensitivity: 80 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

Alpine DM-65-G 6-1/2" M-Series 400W 2-Way Coaxial Car Speakers The Alpine DM-65-G 6.5” Coaxial Speaker Set delivers high-sensitivity sound, clear highs, and a durable design for daily listening. With 50W RMS and 200W peak power, the DM-65-G is efficiently engineered to provide strong audio output without excessive power. Its 92dB sensitivity rating ensures clear, well-balanced sound, making it an excellent upgrade from factory-installed speakers. General Features: 6.5" coaxial speaker set for an enhanced listening experience. Peak Power Handling: 400 watts per pair / 200 watts each RMS Power Handling: 100 watts per pair / 50 watts each 92dB sensitivity ensures efficient, high-output performance. Tedoron tweeter diaphragm delivers crisp, detailed highs. Neodymium tweeters provide smooth treble and articulate vocals. Rubber surround enhances durability and reduces distortion. The injection-molded woofer cone ensures responsive bass. 65Hz - 20kHz frequency response for balanced sound reproduction. 4-ohm impedance for compatibility with factory and aftermarket head units. Grilles are included for a clean, finished installation Top Mount Depth: 2.5625 inches Bottom Mount Depth: 2.8125 inches Cutout Diameter: 5.625 inches Mounting Height: 0.417 inches Frame Width: 6.51 inches Frame Length: 6.51 inches What's in the DM-65C-G Package: Alpine DM-65C-G owner's manual2 Woofers 2 Tweeters (each has an 11" length of wire attached) 2 Flush mount housings (with tweeters installed) 2 Angled surface mount housings Two 56" Tweeter wires with in-line crossovers (each has quick slides on one end to attach the tweeters) 4 Self-adhesive foam pads Eight 3/4" Screws Two M4x8mm Machine screws 8 Speed clips 2 Grilles 2 Grille frames Grille putty Specs on the box Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-S57 5x7" Rear Factory Speaker Replacement Compatible Fit for 2000-2010 Ford F-650/750 + Metra 72-5600 Speaker Harness The Package Includes ALPINE S2-S68 460-watt 5x7" or 6x8" Coaxial 2-way Car Audio Speakers and a METRA 72-5600 Ford Speaker Wire Harness Connector.  Alpine S2-S68 6x8" or 5x7" 460W Peak (150W RMS) 6x8" S-Series 2-way 4-ohm Coaxial Car Speakers Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S68 6x8” Coaxial Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers, resulting in a more accurate and natural sound at an entry-level price point.  General Features: 6" x 8" S Series 2-way Coaxial Car Speakers Peak Power Handling: 460 watts per pair / 230 watts each RMS Power Handling: 150 watts per pair / 75 watts each Hi-Res Audio certified Combined Polypropylene, Glass Fiber, and Mica cone material High-Amplitude Multi-Roll (HAMR) speaker surround 1" Cloth Dome tweeters 3.54" magnet and enhanced motor structure with 110% power handling Lightweight design with high output and low distortion Wide vehicle fitment range for easy installation Top-mount Depth: 2-3/8" Cutout Dimensions: 5 x 7-3/16  Impedance: 4 ohms Frequency Response: 75 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Metra 72-5600 Speaker Adapter Wire HarnessGeneral Features: Speaker Connector Harness Adapter OEM Style Designed For Select 1989-Up Ford Lincoln Mazda Mercury Vehicles Connects Aftermarket Speakers To The Factory Speaker Harness Quick And Easy Installation Plugs Directly Into Harness High Quality, ABS Plastic Molded Connector For The Perfect Fit No Cutting Of Factory Wiring Needed Compatible with the following vehicles:Chevrolet Camaro 2010-2015 Colorado (w/ 7" MyLink radio, RPO code: IOB) 2017 Colorado 2015-2017 Silverado 1500/2500/3500 (w/ 7" MyLink radio, RPO code: IOB) 2016-2017 Silverado 1500 2014-2017 Silverado 2500HD, 3500HD 2015-2017 Suburban 2015-2017 Tahoe 2015-201 Ford Crown Victoria 1998-2011 Edge 2007-2010 Escape 2008-2012 Escape (w/ out sub) 2004-2007 Escape (seven-speaker system w sub) 2004-2007 Escape Hybrid 2004-2007 Escape 2001-2003 Excursion 2000-2005 Expedition 2007-2014 Expedition Non NAV 2004-2006 Expedition with factory NAV 2004-2006 Expedition (late production) with factory NAV 2003 Expedition (late production) 2003 Expedition (early production) 2003 Expedition 1999-2002 Expedition (fleet) 2015 Expedition (SSV) 2015 Explorer 2005-2010 Explorer (Audiophile system w sub) 2004-2005 Explorer 2002-2003 Explorer Sport Trac 2001-2010 F-150 2004-2008 F-250/350/450/550 2017 F-250/350/450/550 (with 8.4-inch screen) 2013-2016 F-250/350/450/550 (without 8.4-inch screen) (with CD) 2013-2016 F-250/350/450/550 XL (without CD) 2013-2016 F-250/350/450/550 1999-2012 F-250 1998 F-650/750 (AM/FM/CD) 2016-2017 F-650/750 (AM/FM) 2016-2017 F-650/750 2000-2015 Focus (without MyFordTouch) 2012-2014 Focus 2000-2007 Focus (with Blaupunkt radio) 2003-2004 Freestar 2004-2007 Fusion 2006-2009 Mustang 2010-2014 Mustang (late 2008 build date) 2008-2009 Mustang (early 2008 build date) 2008 Mustang 2005-2007 Ranger 1998-2011 Taurus (without electronic controls) 2000-2007 Taurus (with electronic controls) 2000-2007 Thunderbird 2002-2005 Transit Connect 2010-2011 GMC Canyon (w/ 7" MyLink radio, RPO code: IOB) 2017 Canyon 2015-2017 Sierra 1500/2500/3500 (w/ 7" MyLink radio, RPO code: IOB) 2016-2017 Sierra 1500 2014-2017 Sierra 2500HD, 3500HD 2015-2017 Yukon / Yukon XL 2015-2016 Yukon Denali / Yukon XL Denali 2015-2016 Lincoln Aviator (with NAV) 2003-2005 Aviator (without NAV) 2003-2005 Mark LT 2005-2008 MKX (with NAV) 2007-2010 MKX (without NAV) 2007-2010 MKZ (with NAV) 2007-2009 MKZ (without NAV) 2007-2009 Navigator (with NAV) 2007-2014 Navigator (without NAV) 2003-2014 Navigator (with NAV) (w/ THX audio) 2003-2006 Navigator (with NAV) (w/o THX audio) 2003-2006 Navigator (early production) 2003 Navigator 1999-2002 Town Car (with NAV) 2003-2011 Town Car (without NAV) 2003-2011 Zephyr (with NAV) 2006 Zephyr (without NAV) 2006 Mazda B-Series Pickup 1998-2009 Mazda3 2004-2009 Tribute 2008-2011 Tribute 2001-2006 Mercury Grand Marquis 1998-2010 Marauder 2003-2004 Mariner 2005-2011 Monterey 2004-2007 Mountaineer 2006-2010 Mountaineer(Audiophile system w sub) 2004-2005 Mountaineer(system w/ out factory sub) 2004-2005 Mountaineer 2002-2003 Sable 2008-2009 Sable (no electronic controls) 2000-2006 Sable (electronic controls) 2000-2007 Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-S40C - Next-Generation S-Series 4" Component Speaker Set Reliable Performance: Experience clean and accurate audio with the S2-S40C speakers. Crafted with a unique combination of polypropylene, Glass Fiber, and Mica Cone materials, these speakers are designed for lightweight construction, high output, and low distortion. Enjoy a superior audio experience with clear and precise sound reproduction. HAMR Surround Technology: The Alpine-exclusive High Amplitude Multi-Roll (HAMR) surround technology integrated into the speaker design allows maximum cone movement. This technology enables the S2-S40C speakers to deliver robust and accurate bass notes, immersing you in deep, impactful sound. Versatile Component Design: The S2-S40C speakers feature a 4 " woofer and 1" tweeters with threaded removable housing. These component speakers offer dynamic and versatile audio performance with a maximum peak power of 140W and a maximum RMS power of 45W. OEM Fitment and In-Line Crossovers: Enjoy seamless integration into your vehicle's audio system with the S2-S40C speakers' OEM fitment design. The included in-line crossovers ensure optimized sound separation and distribution between the woofer and tweeter, resulting in a balanced and immersive listening experience. Upgrade your car's audio system easily and enjoy high-quality sound that complements your vehicle's interior. General Features:: 2-way component speaker system 4" polypropylene/glass fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing in-line crossovers for easier installation handles up to 45 watts RMS (140 watts peak power) sensitivity: 86 dB frequency range: 97-40,000 Hz warranty: 1 year Dimensions: 15 x 7.5 x 5 inches Weight: 4.08 Pounds What's in the box: Alpine S2-S40C owner's manual 2 Woofers Two 4x6 Adapter brackets 2 Tweeters (each has a 29" length of wire attached) 2 Flush mount housings (with tweeters installed) 2 Tweeter grilles (fixed) Two 37" Tweeter wires with in-line crossovers (each has quick slides on both ends) 2 Flush mount retention rings 2 Stealth brackets 2 Flat mounting flanges (used in some factory applications) 2 Foam self-adhesive pads 2 Foam self-adhesive rings Ten 3/4" Screws Ten 5/16" Screws Ten 1/4" Screws 10 Speed clips 10 Spacers 2 Adhesive-gaskets Warranty information Online product registration information Important Notice sheet Declaration of conformity Templates and specs on the box Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

Alpine S2-S40C - Next-Generation S-Series 4" Component Speaker Set Reliable Performance: Experience clean and accurate audio with the S2-S40C speakers. Crafted with a unique combination of polypropylene, Glass Fiber, and Mica Cone materials, these speakers are designed for lightweight construction, high output, and low distortion. Enjoy a superior audio experience with clear and precise sound reproduction. HAMR Surround Technology: The Alpine-exclusive High Amplitude Multi-Roll (HAMR) surround technology integrated into the speaker design allows maximum cone movement. This technology enables the S2-S40C speakers to deliver robust and accurate bass notes, immersing you in deep, impactful sound. Versatile Component Design: The S2-S40C speakers feature a 4 " woofer and 1" tweeters with threaded removable housing. With a maximum peak power of 140W and a maximum RMS power of 45W, these component speakers offer dynamic and versatile audio performance. OEM Fitment and In-Line Crossovers: Enjoy seamless integration into your vehicle's audio system with the S2-S40C speakers' OEM fitment design. The included in-line crossovers ensure optimized sound separation and distribution between the woofer and tweeter, resulting in a balanced and immersive listening experience. Upgrade your car's audio system easily and enjoy high-quality sound that complements your vehicle's interior. General Features:: 2-way component speaker system 4" polypropylene/glass fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing in-line crossovers for easier installation handles up to 45 watts RMS (140 watts peak power) sensitivity: 86 dB frequency range: 97-40,000 Hz warranty: 1 year What's in the box: Alpine S2-S40C owner's manual 2 Woofers Two 4x6 Adapter brackets 2 Tweeters (each has a 29" length of wire attached) 2 Flush mount housings (with tweeters installed) 2 Tweeter grilles (fixed) Two 37" Tweeter wires with in-line crossovers (each has quick slides on both ends) 2 Flush mount retention rings 2 Stealth brackets 2 Flat mounting flanges (used in some factory applications) 2 Foam self-adhesive pads 2 Foam self-adhesive rings Ten 3/4" Screws Ten 5/16" Screws Ten 1/4" Screws 10 Speed clips 10 Spacers 2 Adhesive-gaskets Warranty information Online product registration information Important Notice sheet Declaration of conformity Templates and specs on the box Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.