

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate Power T1000x5ad Compact 5-channel car amplifier 100 watts RMS x 4 at 2 to 4 ohms + 600 watts RMS x 1 at 1 to 2 ohms
$849.99
$1,099.99
Rockford Fosgate Power T1000x5ad Compact 5-channel car amplifier 100 watts RMS x 4 at 2 to 4 ohms + 600 watts RMS x 1 at 1 to 2 ohms
Super-compact, bursting with powerRockford Fosgate's Power Series T1000X5ad 5-channel amplifier can send 100 watts RMS each to four separate speakers while delivering up to 600 watts RMS to a subwoofer. Or you could use this tiny powerpack to run a couple of high-performance components with 200 watts each along with 600 watts RMS for the sub. A dual-fan forced air cooling system keeps this sturdy little amp from overheating, so it can play hard for a long time.
Class AD: accurate and powerfulRockford Fosgate uses their proprietary Class AD amplifier technology, combining the high fidelity of a Class A system with the high efficiency of their special Class D technology, to bring you this ultra-efficient, high-output amplifier. In other words, this compact amp produces more power with less current draw from your vehicle's charging system than most other amps on the road today.Rockford Fosgate's high-tech solutions yield more powerThis Power Series amplifier actively monitors speaker and subwoofer performance, using Rockford Fosgate's Constant Power technology. A speaker's impedance naturally fluctuates as it performs, fighting against your amp's output. So, just like your cruise control increases the engine's RPM to maintain your car's speed uphill, Constant Power maintains this amp's output by increasing its internal voltage and current flow when the speaker's impedance rises. This results in up to a 25% increase in the amp's total power output.
Easy to set for optimum performanceRockford Fosgate's C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) setup system ensures your music will sound as clean and powerful as possible. It works like this: first download the setup tones from Rockford Fosgate, then play the tone, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It's that simple — your amplifier will be perfectly set to match your receiver's output. When your receiver reaches maximum clean volume, you'll get maximum clean power from your Power amp. At quiet listening levels, you'll hear less background noise and more of your music.
Clip lights monitor distortionIf that blue light turns solid red while you're playing music, the amp's telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music's clipping and restore pristine sound.
Product highlights:
5-channel car amplifier
100 watts RMS x 4 + 400 watts RMS x 1 at 4 ohms
100 watts RMS x 4 + 600 watts RMS x 1 at 2 ohms
200 watts RMS x 2 bridged at 4 ohms + 600 watts RMS at 1 ohm
CEA-2006 compliant
Features:
Class-AD amp technology on front and rear channels; Class BD on sub channel with Constant Power topology
C.L.E.A.N. gain setup system includes clip lights and link to Rockford Fosgate's setup tones
differential input circuitry helps eliminate hum
dual-fan forced induction cooling
variable high- and low-pass filters (50-250 Hz, 12 dB/octave) on front and rear channels
variable low-pass filter (50-250 Hz, 12 dB/octave) on subwoofer channel
switchable subsonic filter (28 Hz, 12 dB/octave) on subwoofer channel
variable Punch EQ bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz) on all channels
optional PLC2 wired remote level control with clip light available
More Info:
preamp and speaker-level inputs
signal-sensing turn-on with speaker-level inputs eliminate need for remote turn-on lead
8-gauge power and ground leads and a 100-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 100-amp in-line fuse between the distribution block and the amplifier is recommended
12-1/2"W x 1-11/16"H x 4-5/16"D
warranty: 2 years (extends to 3 years when purchased with an appropriate Rockford Fosgate amp wiring kit
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate Punch P1000X5 5-channel car amplifier 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm
$629.99
$749.99
Rockford Fosgate Punch P1000X5 5-channel car amplifier — 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm
The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer. The P1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels, and run subwoofer(s) off the 5th channel! Known worldwide for brute power, this amplifier offers higher efficiency along with tri-stage protection that covers thermal, over-current, and short circuits.
General Features:
5-channel car amplifier
75 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms
125 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
250 watts RMS x 2 bridged at 4 ohms + 500 watts RMS at 1 ohm
CEA-2006 compliant
variable high- and low-pass filters (50-250 Hz, 12 dB/octave)
variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz)
switchable subsonic filter (28 Hz, 12 dB/octave) on subwoofer channel
L.E.A.N. gain setup system includes test tone CD
Test tones are also available as MP3 downloads from Amazon on Demand, Rhapsody, Google Play, and Spotify, labeled "3sixty..3 setup disc" (Punch amps and the 3sixty..3 use the same test tone tracks for setup)
Class-BD amplifier design
frequency response: 20-20K Hz
Dynamic Thermal Management and MEHSA MOSFET cooling systems
MOSFET power and output stages
preamp and speaker-level inputs (speaker-level inputs require a speaker wire to RCA adapter)
signal-sensing turn-on with speaker-level inputs eliminates the need for a remote turn-on lead
optional PLC2 wired remote level control with clip light available
4-gauge power and ground leads and a 150-amp fuse recommended — wiring and hardware not included with amplifier
No onboard fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended.
15-1/8"W x 2-7/16"H x 8-13/16"D
What is in the box:
5-Channel amplifier
Four 1-1/2" Self-tapping screws
5mm Allen wrench
Quick setup instructions
Certificate of Performance
Setup/Manual disc
Rockford Fosgate Punch P1000X5 owner's manual
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate Punch P300X1 Mono amplifier 300 watts RMS x 1 at 2 ohms
$249.99
$449.99
Rockford Fosgate Punch P300X1 Mono amplifier 300 watts RMS x 1 at 2 ohms
Big power for your sub or speaker systemRockford Fosgate's Punch P300X1 mono amplifier produces up to 300 watts RMS, giving you plenty of clean power for your rhythm track. With frequency response from 20 to 20,000 Hz, this full-range amp can also power a center channel or component speaker. You can use the low-pass filter to tune the sizzle away from your sub, or the high-pass filter to keep the lows out of a component speaker. The Punch EQ2 gives you a variable bass and treble boost, in case you want to add a little of that boom and sizzle back into the mix.
Easy to set for optimum performanceOnce again, Rockford Fosgate steps away from the crowd with their C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise). This setup system ensures your music will sound as clean and powerful as possible. It works like this: first, download the setup tones from Rockford Fosgate, then play the tone, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It's that simple — your amplifier will be perfectly set to match your receiver's output. When your receiver reaches maximum clean volume, you'll get maximum clean power from your Power amp. You'll hear less background noise and more of your music at quiet listening levels.
Keeps an eye on things while playingIf that blue light turns solid red while you're playing music, the amp is telling you that your source is distorting and that you should turn it down or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music's clipping. The amp's built-in computer keeps tabs on the output current, ensuring that plunging speaker impedances (they change during play) or a short circuit won't hurt anything.
Maintaining coolness raises efficiency and lowers distortionRockford Fosgate's Dynamic Thermal Management system uses forced air to dissipate heat evenly across the amp and out through the high-mass heatsink, efficiently drawing heat away from vital internal parts. Their proprietary MEHSA cooling process maximizes the heat transfer from the MOSFET devices to the heatsink, allowing the heat to escape more readily, so the transistors stay cooler and work better.
Product highlights:
full-range mono amplifier
frequency response: 20-20,000 Hz
200 watts RMS x 1 at 4 ohms (300 watts RMS x 1 at 2 ohms)
CEA-2006 compliant
Features:
variable high- and low-pass filter (50-250 Hz, 12 dB/octave)
variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz)
C.L.E.A.N. gain setup system includes clip lights and links to Rockford Fosgate's setup tones
Class-AB amplifier design
Dynamic Thermal Management and MEHSA MOSFET cooling systems
MOSFET power and output stages
preamp inputs and outputs
speaker-level inputs (speaker wire to RCA adapter required)
signal-sensing turn-on with speaker-level inputs eliminates the need for a remote turn-on lead
optional PLC2 wired remote level control with clip light available
8-gauge power and ground leads and a 50-amp fuse recommended — wiring and hardware not included with amplifier
9-15/16"W x 2-7/16"H x 7-13/16"D
warranty: 1 year
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.