Mackie (360)

Mackie CR5-X Creative Reference Series 5" Multimedia Monitors (Pair)   The Mackie CR5-X is a pair of Creative Reference Series 5" multimedia monitors offering a compact solution for quality audio playback in home studios and gaming setups. With 80W of amplification driving 5" woofers and 0.75" tweeters, the CR5-X monitors deliver more volume and bass than the smaller CR3-X and CR4-X. The pair consists of one passive speaker and one powered speaker that connect with an included speaker cable. Each monitor incorporates a custom-tuned rear port to smoothly extend the low end and a specially designed waveguide for clarity and proper dispersion of high frequencies. With plenty of I/O provided, the CR5-X can accept a feed from your audio interface, computer soundcard, or mobile device while pumping out your mix to the drivers or your favorite headphones. General Features: For recording, mixing, sound design, gaming, and casual listening All-wood cabinet with a brushed-metal front panel 3.5mm, RCA, and 1/4" inputs accommodate balanced or unbalanced stereo line-level signal from your audio interface, mixer, soundcard, or mobile device Front-panel 3.5mm headphone port auto-defeats speaker output 80W of amplification drive the 5" polypropylene-coated woofers and 0.75" ferrofluid-cooled, silk-dome tweeters Speaker placement switch lets you choose which side to use for the on/off/volume control Includes a 3.5mm to stereo RCA cable for connecting your computer to the speakers, a standard 3.5mm cable to plug in your smartphone, and a speaker cable to connect the left and right monitors Included monitor isolation pads minimize boomy bass buildup and provide up/down tilt control for more focused listening ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie CR5-XBT Creative Reference Series 5" Multimedia Monitors with Bluetooth (Pair) The Mackie CR5-XBT is a pair of Creative Reference Series 5" multimedia monitors offering a compact solution for quality audio playback in home studios and gaming setups. With 80W of amplification driving 5" woofers and 0.75" tweeters, the CR5-XBT monitors deliver more volume and bass than the smaller CR3-XBT and CR4-XBT. The pair consists of one passive speaker and one powered speaker that connects with an included speaker cable. Each monitor incorporates a custom-tuned rear port to smoothly extend the low end and a specially designed waveguide for clarity and proper dispersion of high frequencies. With plenty of I/O provided, the CR5-XBT can accept a wired connection from your audio interface, computer soundcard, non-Bluetooth music player, or a wireless stream via Bluetooth from your mobile device. Either way, your music can be pumped out to the drivers or your favorite headphones.  The CR5-XBT features a download for ProTools | First and The Musician's Collection plug-in package including 23 high-quality plug-ins with BBD Delay, Eleven Lite, the 304E EQ, and the 304C Compressor. General Features: For recording, mixing, sound design, gaming, and casual listening All-wood cabinet with a brushed-metal front panel Built-in Bluetooth receiver enables wireless music streaming from your smartphone, tablet, or Bluetooth-enabled computer 3.5mm, RCA, and 1/4" inputs accommodate balanced or unbalanced stereo line-level signal from your audio interface, mixer, soundcard, or mobile device Front-panel 3.5mm headphone port auto-defeats speaker output 80W of amplification drive the 5" polypropylene-coated woofers and 0.75" ferrofluid-cooled, silk-dome tweeters The speaker placement switch lets you choose which side to use for the on/off/volume control Includes a 3.5mm stereo RCA cable for connecting your computer to the speakers, a standard 3.5mm cable to plug in your smartphone, and a speaker cable to connect the left and right monitors Included monitor isolation pads minimize boomy bass buildup and provide up/down tilt control for more focused listening ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie DB-100 Desktop Microphone Boom Arm The Mackie DB-100 Desktop Microphone Boom Arm is an accessory that anyone working with the spoken word can employ at their desktop setup. It's a boom arm that attaches to your desk, thus removing any need for a bulky, intrusive mic stand in your home studio.   General Features: Mount Your Mic to Your Desk Sturdy Steel Construction Eliminates the Need for a Mic Stand Hook-and-Loop Straps to Manage Cables ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie DL16S Bag For Digital Mixer The DL16S Digital Mixer Bag from Mackie is a protective soft bag for the DL16 digital mixer. It can be used to protect the mixer from moisture and dust. It is suitable for transport and storage. The perfect fit for your Mackie DL16S wireless digital mixer, this Mackie bag gives you foam padding inside, rugged fabric outside, and a shoulder strap. It keeps your speaker protected and provides access for loading in and out. This durable, black bag also features a large compartment for storing cables and other small accessories. General Features: Compatible with: DL16S mixer Color: Black Custom-fit for your Mackie DL16S digital mixer Tough fabric exterior Internal foam padding Heavy-duty zippered closures Shoulder strap included Embroidered Mackie logo Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie DL16S Bag For Digital Mixer The DL16S Digital Mixer Bag from Mackie is a protective soft bag for the DL16 digital mixer. It can be used to protect the mixer from moisture and dust. It is suitable for transport and storage. The perfect fit for your Mackie DL16S wireless digital mixer, this Mackie bag gives you foam padding inside, rugged fabric outside, and a shoulder strap. It keeps your speaker protected and provides access for loading in and out. This durable, black bag also features a large compartment for storing cables and other small accessories. General Features: Compatible with: DL16S mixer Color: Black Custom-fit for your Mackie DL16S digital mixer Tough fabric exterior Internal foam padding Heavy-duty zippered closures Shoulder strap included Embroidered Mackie logo Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie DL32S Digital Mixer Bag The Mackie DL32S Digital Mixer Bag protects your speaker and makes loading in and out access. This durable, black bag also features a large compartment for storing cables and other small accessories. General Features: Custom-fit for your Mackie DL32S digital mixer Tough fabric exterior Internal foam padding Heavy-duty zippered closures Shoulder strap included Embroidered Mackie logo Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie DL32S 32-channel Rackmount Digital Mixer Leave that bulky snake at home! Because you can control the Mackie DL32S with your iPad, you can place it anywhere. Even if the DL32S is onstage, you can walk around the venue to fine-tune your mix. It's a great way to ensure optimal sound quality for every member of your audience. And because the DL32S supports up to 20 iPads at once, multiple engineers can work from one DL32S. You can even set up personal mixes for each performer that are tweakable via any iOS device. Back in the day, you would've needed miles of cable and a pile of submixers to pull off this much signal routing. But with the DL32S in your rack, all you need is an iPad and your fingers! General Features: Ample I/O including 32 stereo-linkable input channels, 10 fully assignable XLR outputs, 15 output buses, 8 stereo-linkable aux sends, 6 stereo-linkable subgroups, a Main L/R bus, and a headphone output 16 input channels are XLR jacks, 16 feature XLR/TRS combo jacks, and two include hi-Z inputs 32 recallable Onyx+ mic preamps deliver top-notch sound Wireless mixing allows you to take control of your mix via an iPad Tweak your mix, processing, and routing from anywhere in the venue Built-in Wi-Fi networking and instant recall ensure easy setup Supports up to 20 iPads at once to accommodate multiple engineers 4 onboard FX processors with dedicated sends and returns create polished, professional-sounding mixes 32-in/32-out USB interface for recording straight to your DAW Play intermission music, backing tracks, and more Play back your full multitrack recording for a virtual sound check Use your DAW's audio plug-ins in a live environment Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie DL32S 32-channel Rackmount Digital Mixer Leave that bulky snake at home! Because you can control the Mackie DL32S with your iPad, you can place it anywhere. Even if the DL32S is onstage, you can walk around the venue to fine-tune your mix. It's a great way to ensure optimal sound quality for every member of your audience. And because the DL32S supports up to 20 iPads at once, multiple engineers can work from one DL32S. You can even set up personal mixes for each performer that are tweakable via any iOS device. Back in the day, you would've needed miles of cable and a pile of submixers to pull off this much signal routing. But with the DL32S in your rack, all you need is an iPad and your fingers! General Features: Ample I/O including 32 stereo-linkable input channels, 10 fully assignable XLR outputs, 15 output buses, 8 stereo-linkable aux sends, 6 stereo-linkable subgroups, a Main L/R bus, and a headphone output 16 input channels are XLR jacks, 16 feature XLR/TRS combo jacks, and two include hi-Z inputs 32 recallable Onyx+ mic preamps deliver top-notch sound Wireless mixing allows you to take control of your mix via an iPad Tweak your mix, processing, and routing from anywhere in the venue Built-in Wi-Fi networking and instant recall ensure easy setup Supports up to 20 iPads at once to accommodate multiple engineers 4 onboard FX processors with dedicated sends and returns create polished, professional-sounding mixes 32-in/32-out USB interface for recording straight to your DAW Play intermission music, backing tracks, and more Play back your full multitrack recording for a virtual sound check Use your DAW's audio plug-ins in a live environment Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie DLM12 2000W 12-inch Powered Speaker You can rely on the Mackie DLM12 powered loudspeaker for clear, powerful live sound, much more than you'd expect from its small size. The DLM12 boasts 2,000 watts of Class D amplification, powering a custom-designed 12" woofer and 1.75" HF compression driver. It has the power and quality to base your band's PA on, with built-in feedback suppression, six voicing modes, and up to 300ms of delay for alignment in more extensive speaker arrangements. But its built-in mixer and 16 great-sounding effects make the DLM12 the perfect speaker for solo singer/songwriter performances. The Mackie DLM12-powered loudspeaker will exceed your expectations for a powerful and portable PA solution. General Features: High power and big sound for a wide range of applications Built-in mixer and effects are perfect for solo performances Smart DSP enhances your sound and saves you time True portability, even with your 2-door hatchback 2-way, 2,000-watt powered speaker that is 1/3 smaller than most 2-way speakers 12" LF woofer, 1.75" HF compression driver Built-in DSP for feedback suppression, speaker voicing, alignment delay, and more 16 built-in effects, including reverb, chorus, and delay, which are perfect for solo use XLR/TRS combo inputs and RCA inputs let you connect microphones and instruments directly for solo use Stackable for storage/transport Ultra-compact design is highly portable Can be pole-mounted, wall-mounted, or flown by a contractor Built-in kickstand lets you angle the speaker for use as a floor monitor Three memory locations store your DSP/effects/voicing settings for instant recall Amazingly lightweight at only 30 lbs. Configuration: Active 2-Way Handles: 1 x Top Cooling: Fan (Variable Speed) Construction Material: ABS, Metal Grille Operating Temperature: 32 to 104°F / 0 to 40°C Dimensions: 15.9 x 15.3 x 14.3" / 403 x 389 x 363 mm Weight: 31 lb / 14.1 kg Package Weight: 37 lb Box Dimensions (LxWxH): 20 x 20 x 19.5" Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.