Axxess (153)

Axxess AXDSPX-A2B1 A2B/DSP Data Interface - Compatible Fits for Select Ford Models 2017-2020 Overcome the factory radio’s built-in “audio processing” with our patented digital signal processor, or “DSP”, vehicle-specific packages. Factory radios have built-in sound processing designed to make your mass-produced factory speakers sound as good as they can without breaking. This means that if you upgrade to aftermarket speakers, your factory radio will process the sound according to the factory settings and your system just won’t sound as great as you hoped it would. To remove the limitations of the factory radio and get clean signals for aftermarket audio gear, you will need a sound processor like our line of patented DSP products. Our DSP is unlike any other on the market offering not only serious sound improvements but retains many of the features commonly lost when upgrading a sound system. General Features: Designed for select vehicles with a Sony® A2B amplifier Package includes the A2B data interface with built-in AXDSP-X technology, vehicle-specific T-harness, and an amplifier bypass harness Chimes and voice prompts go through the aftermarket amplifier Factory amplifier does not need to be retained Install location: At the factory amplifier Micro “B” USB updatable 1-year limited warranty Specifications: Selectable 31-band Graphic EQ or 5-band parametric EQ on each channel with high pass, low pass, and bandpass filters 6 inputs and 10 individually assignable outputs Selectable slope (12, 24, 36, or 48db per octave) Selectable Graphic or Parametric EQ Independent equalization on each of the 10 outputs Each channel can be delayed independently up to 10 ms Clipping detection and limiting circuits Bass knob included Retains OE voice prompts (SYNC®) if vehicle is equipped Settings adjusted wirelessly in the free AX-DSP-XL app available for smartphones and tablets To be used with factory radios Read, write, and store configurations for future recall Password protect feature available in the app Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Axxess AXDSPX-A2B2 A2B Data Interface Amp Bypass Harness - Compatible Fits for Ford 2018-Up. Overcome the factory radio’s built-in “audio processing” with our patented digital signal processor, or “DSP”, vehicle-specific packages. Factory radios have built-in sound processing designed to enhance the sound quality of mass-produced factory speakers, maximizing their potential without compromising performance. This means that if you upgrade to aftermarket speakers, your factory radio will process the sound according to its factory settings, and your system will not sound as great as you had hoped. To remove the limitations of the factory radio and get clean signals for aftermarket audio gear, you will need a sound processor like our line of patented DSP products. Our DSP is unlike any other on the market, offering not only serious sound improvements but also retaining many of the features commonly lost when upgrading a sound system. Vehicle-specific Features: Designed for select vehicles with a B&O A2B amplifier The package includes the A2B data interface with built-in AXDSP-X technology, vehicle-specific T-harness, and an amplifier bypass harness The factory amplifier does not need to be retained Chimes and voice prompts go through the aftermarket amplifier Install location: At the factory amplifier Micro “B” USB updatable 1-year limited warranty Specifications: Selectable 31-band Graphic EQ or 5-band parametric EQ on each channel with high pass, low pass, and bandpass filters 6 inputs and 10 individually assignable outputs Selectable slope (12, 24, 36, or 48db per octave) Selectable Graphic or Parametric EQ Independent equalization on each of the 10 outputs Each channel can be delayed independently up to 10 ms Clipping detection and limiting circuits Bass knob included Retains OE voice prompts (SYNC®) if vehicle is equipped Settings adjusted wirelessly in the free AX-DSP-XL app available for smartphones and tablets To be used with factory radios Read, write, and store configurations for future recall Password-protect feature available in the app Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Axxess AXDSPX-A2B3 A2B/DSP Data Interface - Compatible Fits for Select Lincoln Models 2018-UP* (with Revel® amp) Overcome the factory radio’s built-in “audio processing” with our patented digital signal processor, or “DSP”, vehicle-specific packages. Factory radios have built-in sound processing designed to enhance the sound quality of mass-produced factory speakers, maximizing their potential without compromising performance. This means that if you upgrade to aftermarket speakers, your factory radio will process the sound according to the factory settings, and your system won’t sound as great as you hoped it would. To remove the limitations of the factory radio and get clean signals for aftermarket audio gear, you will need a sound processor like our line of patented DSP products. Our DSP is unlike any other on the market, offering not only serious sound improvements but also retaining many of the features commonly lost when upgrading a sound system. General Features: Designed for select vehicles with a Revel® A2B amplifier The package includes the A2B data interface with built-in AXDSP-X technology, vehicle-specific T-harness, and an amplifier bypass harness The factory amplifier does not need to be retained Chimes and voice prompts go through the aftermarket amplifier Install location: At the factory amplifier Micro “B” USB updatable 1-year limited warranty Specifications: Selectable 31-band Graphic EQ or 5-band parametric EQ on each channel with high pass, low pass, and bandpass filters 6 inputs and 10 individually assignable outputs Selectable slope (12, 24, 36, or 48db per octave) Selectable Graphic or Parametric EQ Independent equalization on each of the 10 outputs Each channel can be delayed independently up to 10 ms Clipping detection and limiting circuits Bass knob included Retains OE voice prompts (SYNC®) if the vehicle is equipped Settings adjusted wirelessly in the free AX-DSP-XL app available for smartphones and tablets To be used with factory radios Read, write, and store configurations for future recall Password-protect feature available in the app Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Axxess AXDSPX-BM1 DSP Data Interface - Compatible Fits for Fits Select BMW/MINI Models 2006-2020 Overcome the factory radio’s built-in “audio processing” with our patented digital signal processor, or “DSP”, vehicle-specific packages. Factory radios have built-in sound processing designed to enhance the sound quality of mass-produced factory speakers, maximizing their potential without compromising performance. This means that if you upgrade to aftermarket speakers, your factory radio will process the sound according to the factory settings, and your system just won’t sound as great as you hoped it would. To remove the limitations of the factory radio and get clean signals for aftermarket audio gear, you will need a sound processor like our line of patented DSP products. Our DSP is unlike any other on the market, offering not only serious sound improvements but also retaining many of the features commonly lost when upgrading a sound system. General Features: The package includes the AXDSP-X interface and vehicle-specific T-harness Designed for non-amplified models Install location: At the factory radio Micro “B” USB updatable 1-year limited warranty Specifications: Selectable 31-band Graphic EQ or 5-band parametric EQ on each channel with high pass, low pass, and bandpass filters 6 inputs and 10 individually assignable outputs Selectable slope (12, 24, 36, or 48db per octave) Selectable Graphic or Parametric EQ Independent equalization on each of the 10 outputs Each channel can be delayed independently up to 10 ms Clipping detection and limiting circuits Bass knob included Settings can be adjusted wirelessly using the free AX-DSP-XL app, available for smartphones and tablets. Easy behind the radio installation Can be used with factory and aftermarket radios Read, write, and store configurations for future recall Password-protect feature available in the app Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Axxess AXDSPX-BMWM25 MOST®/DSP Data Interface - Compatible Fits for Select BMW Models 2010-2020 Overcome the factory radio’s built-in “audio processing” with our patented digital signal processor, or “DSP”, vehicle-specific packages. Factory radios have built-in sound processing designed to enhance the sound quality of mass-produced factory speakers, maximizing their potential without compromising performance. This means that if you upgrade to aftermarket speakers, your factory radio will process the sound according to the factory settings, and your system just won’t sound as great as you hoped it would. To remove the limitations of the factory radio and get clean signals for aftermarket audio gear, you will need a sound processor like our line of patented DSP products. Our DSP is unlike any other on the market, offering not only serious sound improvements but also retaining many of the features commonly lost when upgrading a sound system. General Features: Designed for MOST® amplified systems Package includes the MOST® data interface with built-in AXDSP-X technology, vehicle-specific T-harness, and an amplifier bypass harness Install location: At the factory amplifier Micro “B” USB updatable 1-year limited warranty Specifications: Selectable 31-band Graphic EQ or 5-band parametric EQ on each channel with high pass, low pass, and bandpass filters 6 inputs and 10 individually assignable outputs Selectable slope (12, 24, 36, or 48db per octave) Selectable Graphic or Parametric EQ Independent equalization on each of the 10 outputs Each channel can be delayed independently up to 10 ms Clipping detection and limiting circuits Bass knob included Settings can be adjusted wirelessly using the free AX-DSP-XL app, available for smartphones and tablets. To be used with factory radios Read, write, and store configurations for future recall Password-protect feature available in the app Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Axxess AXDSPX-CH3 DSP Data Interface with Pre-wired Harness - Compatible Fits for Select Chrysler Models 2011-2020 Overcome the factory radio’s built-in “audio processing” with our patented digital signal processor, or “DSP”, vehicle-specific packages. Factory radios have built-in sound processing designed to enhance the sound quality of mass-produced factory speakers, maximizing their potential without compromising performance. This means that if you upgrade to aftermarket speakers, your factory radio will process the sound according to its factory settings, and your system will not sound as great as you had hoped. To remove the limitations of the factory radio and get clean signals for aftermarket audio gear, you will need a sound processor like our line of patented DSP products. Our DSP is unlike any other on the market, offering not only serious sound improvements but retaining many of the features commonly lost when upgrading a sound system. General Features: Designed for amplified and non-amplified systems Package includes the AXDSP-X interface and vehicle-specific T-harness Install location: At the factory radio Micro “B” USB updatable 1-year limited warranty Specifications: Selectable 31-band Graphic EQ or 5-band parametric EQ on each channel with high pass, low pass, and bandpass filters 6 inputs and 10 individually assignable outputs Selectable slope (12, 24, 36, or 48db per octave) Selectable Graphic or Parametric EQ Independent equalization on each of the 10 outputs Each channel can be delayed independently up to 10 ms Chime control for Chrysler vehicles Clipping detection and limiting circuits Bass knob included Retains OE voice prompts (Uconnect®) if the vehicle is equipped Retains factory chimes, including parking sensor and cross path detection alerts if the vehicle is equipped Settings adjusted wirelessly in the free AX-DSP-XL app available for smartphones and tablets Easy behind the radio installation Can be used with factory and aftermarket radios Read, write, and store configurations for future recall Password-protect feature available in the app Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Axxess AXDSPX-CH4 DSP Data Interface - Compatible Fits for Select Chrysler Models 2007-2020 Overcome the factory radio’s built-in “audio processing” with our patented digital signal processor, or “DSP”, vehicle-specific packages. Factory radios have built-in sound processing designed to enhance the sound quality of mass-produced factory speakers, maximizing their potential without compromising performance. This means that if you upgrade to aftermarket speakers, your factory radio will process the sound according to the factory settings, and your system won’t sound as great as you hoped it would. To remove the limitations of the factory radio and get clean signals for aftermarket audio gear, you will need a sound processor like our line of patented DSP products. Our DSP is unlike any other on the market, offering not only serious sound improvements but retaining many of the features commonly lost when upgrading a sound system. General Features: Designed for amplified and non-amplified systems The package includes the AXDSP-X interface and vehicle-specific T-harness Install location: At the factory radio Micro “B” USB updatable 1-year limited warranty Specifications: Selectable 31-band Graphic EQ or 5-band parametric EQ on each channel with high pass, low pass, and bandpass filters 6 inputs and 10 individually assignable outputs Selectable slope (12, 24, 36, or 48db per octave) Selectable Graphic or Parametric EQ Independent equalization on each of the 10 outputs Each channel can be delayed independently up to 10 ms Chime control for Chrysler vehicles Clipping detection and limiting circuits Bass knob included Retains OE voice prompts (Uconnect®) if vehicle is equipped Retains factory chimes, including parking sensor and cross path detection alerts if the vehicle is equipped Settings adjusted wirelessly in the free AX-DSP-XL app available for smartphones and tablets Easy behind the radio installation Can be used with factory and aftermarket radios Read, write, and store configurations for future recall Password-protect feature available in the app Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Axxess AXDSPX-CH5 DSP Data Interface Compatible Fits for Select Chrysler Models 2013-2023 Overcome the factory radio’s built-in “audio processing” with our patented digital signal processor, or “DSP”, vehicle-specific packages. Factory radios have built-in sound processing designed to enhance the sound quality of mass-produced factory speakers, maximizing their potential without compromising performance. This means that if you upgrade to aftermarket speakers, your factory radio will process the sound according to its factory settings, and your system will not sound as great as you had hoped. To remove the limitations of the factory radio and get clean signals for aftermarket audio gear, you will need a sound processor like our line of patented DSP products. Our DSP is unlike any other on the market, offering not only serious sound improvements but retaining many of the features commonly lost when upgrading a sound system. General Features: Designed for amplified and non-amplified systems Package includes the AXDSP-X interface and vehicle-specific T-harness Install location: At the factory radio Micro “B” USB updatable 1-year limited warranty Specifications: Selectable 31-band Graphic EQ or 5-band parametric EQ on each channel with high pass, low pass, and bandpass filters 6 inputs and 10 individually assignable outputs Selectable slope (12, 24, 36, or 48db per octave) Selectable Graphic or Parametric EQ Independent equalization on each of the 10 outputs Each channel can be delayed independently up to 10 ms Chime control for Chrysler vehicles Clipping detection and limiting circuits Bass knob included Retains OE voice prompts (Uconnect®) if the vehicle is equipped Retains factory chimes, including parking sensor and cross path detection alerts if the vehicle is equipped Settings adjusted wirelessly in the free AX-DSP-XL app available for smartphones and tablets Easy behind the radio installation Can be used with factory and aftermarket radios Read, write, and store configurations for future recall Password-protect feature available in the app Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Axxess AXDSPX-CH8 DSP Data Interface with Pre-wired Harness - Compatible Fits for Select Chrysler Models 2021-UP Overcome the factory radio’s built-in “audio processing” with our patented digital signal processor, or “DSP”, vehicle-specific packages. Factory radios have built-in sound processing designed to enhance the sound quality of mass-produced factory speakers, maximizing their potential without compromising performance. This means that if you upgrade to aftermarket speakers, your factory radio will process the sound according to the factory settings, and your system just won’t sound as great as you hoped it would. To remove the limitations of the factory radio and get clean signals for aftermarket audio gear, you will need a sound processor like our line of patented DSP products. Our DSP is unlike any other on the market, offering not only serious sound improvements but also retaining many of the features commonly lost when upgrading a sound system. Vehicle-specific Features: Designed for amplified and non-amplified systems Package includes the AXDSP-X interface and vehicle-specific T-harness Install location: At the factory radio Micro “B” USB updatable 1-year limited warranty Specifications: Selectable 31-band Graphic EQ or 5-band parametric EQ on each channel with high pass, low pass, and bandpass filters 6 inputs and 10 individually assignable outputs Selectable slope (12, 24, 36, or 48db per octave) Selectable Graphic or Parametric EQ Independent equalization on each of the 10 outputs Each channel can be delayed independently up to 10 ms Chime control for Chrysler vehicles Clipping detection and limiting circuits Bass knob included Retains OE voice prompts (Uconnect®) if the vehicle is equipped Retains factory chimes, including parking sensor and cross-path detection alerts if the vehicle is equipped Settings adjusted wirelessly in the free AX-DSP-XL app available for smartphones and tablets Easy behind the radio installation Can be used with factory and aftermarket radios Read, write, and store configurations for future recall Password-protect feature available in the app Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Axxess AXDSPX-TY1 DSP Data Interface with Pre-wired Harness - Compatible Fits for Select Lexus/Toyota Models 2001-2015 Overcome the factory radio’s built-in “audio processing” with our patented digital signal processor, or “DSP”, vehicle-specific packages. Factory radios have built-in sound processing designed to enhance the sound quality of mass-produced factory speakers, maximizing their potential without compromising performance. This means that if you upgrade to aftermarket speakers, your factory radio will process the sound according to its factory settings, and your system will not sound as great as you had hoped. To remove the limitations of the factory radio and get clean signals for aftermarket audio gear, you will need a sound processor like our line of patented DSP products. Our DSP is unlike any other on the market, offering not only serious sound improvements but also retaining many of the features commonly lost when upgrading a sound system. General  Features: • Designed for amplified systems• Package includes the AXDSP-X interface and vehicle-specific T-harness• Install location: At the factory radio• Micro “B” USB updatable• 1-year limited warranty Specifications:• Selectable 31-band Graphic EQ or 5-band parametric EQ on each channel with high pass, low pass, and bandpass filters• 6 inputs and 10 individually assignable outputs• Selectable slope (12, 24, 36, or 48db per octave)• Selectable Graphic or Parametric EQ• Independent equalization on each of the 10 outputs• Each channel can be delayed independently up to 10 ms• Clipping detection and limiting circuits• Bass knob included• Settings adjusted wirelessly in the free AX-DSP-XL app available for smartphones and tablets• Easy behind the radio installation• Can be used with factory and aftermarket radios• Read, write, and store configurations for future recall• Password protect feature available in the app Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Axxess AXDSPX-TY2 DSP Data Interface with Pre-wired Harness - Compatible Fits for Select Scion/Subaru/Toyota Models 2003-2022 Overcome the factory radio’s built-in “audio processing” with our patented digital signal processor, or “DSP”, vehicle-specific packages. Factory radios have built-in sound processing designed to enhance the sound quality of mass-produced factory speakers, maximizing their potential without compromising performance. This means that if you upgrade to aftermarket speakers, your factory radio will process the sound according to the factory settings, and your system just won’t sound as great as you hoped it would. To remove the limitations of the factory radio and get clean signals for aftermarket audio gear, you will need a sound processor like our line of patented DSP products. Our DSP is unlike any other on the market, offering not only serious sound improvements but also retaining many of the features commonly lost when upgrading a sound system. General Features:• Designed for non-amplified systems• Package includes the AXDSP-X interface and vehicle-specific T-harness• Install location: At the factory radio• Micro “B” USB updatable• 1-year limited warranty Specifications: • Selectable 31-band Graphic EQ or 5-band parametric EQ on each channel with high pass, low pass, and bandpass filters• 6 inputs and 10 individually assignable outputs• Selectable slope (12, 24, 36, or 48db per octave)• Selectable Graphic or Parametric EQ• Independent equalization on each of the 10 outputs• Each channel can be delayed independently up to 10 ms• Clipping detection and limiting circuits• Bass knob included• Settings adjusted wirelessly in the free AX-DSP-XL app available for smartphones and tablets• Easy behind the radio installation• Can be used with factory and aftermarket radios• Read, write, and store configurations for future recall• Password-protect feature available in the app Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.