Yorkville (103)

The Yorkville Sound MicroMix MM5D powered box mixer is the ideal PA solution for most applications where 2 x 90 watts (stereo) is enough power yet input flexibility is required. Balanced XLR mic, 1/4-inch phone and dual RCA line inputs, onboard user controlled digital effect unit and tape outs (with separate level controls) make the MM5D the perfect powered mixer for live PA, rehearsal, installation or announcement PA applications. Product Specification:   Number of Channels: 5 Mono Channel EQ: 2 band shelving Channel Effects: Yes Inputs - XLR (bal): Ch. 1 - 5 Inputs - 1/4": Ch. 1 - 5 Inputs - RCA (unbal): Tape/CD in Internal Effects: 16 Digital Effects: reverb, echo, chorus, flange Effects Send: No Effects Return: No Effects Return to Main: Yes Effects Return to Monitor: No Record Outputs: Stereo RCA with level control Max Gain to Line Out -Mic Input (dB): 84dB Max Gain to Line Out -Line Input (dB): 70dB Main Outputs (Line Level): No Outputs - Amp A - 1/4" Jacks: 1 Outputs - Amp A - Speakon 4-pin: 1 Mixer - Freq Resp (Tone and EQ Flat,2dB): 40Hz - 20,000Hz Amp A-Power Output@8 Ohms (0.1 PER THD 1kHz): 2 x 60 watts Amp A - Power Output @ 4 Ohms: 2 x 90 watts THD - 1kHz (dB): less than 0.1% Typical crosstalk -1 kHz (dB-: less than - 60dB Power Consumption (typ/max): 1.0 A @ 120VAC / 0.5 A @ 230VAC Protection: Clip limiter, thermal shutdown Cooling: Passive heatsink and internal Fan Dimensions (DWH, inches): 9 x 17.75 x 6 Dimensions (DWH, cm): 22.85 x 45 x 15.25 Weight (lbs/kg): 19.2 / 9.7

Yorkville Sound NX10C-2, Two-Way Coaxial 1200W Powered PA Speaker - 10/1 Inch NX 10” Powered Loudspeaker NX loudspeakers have earned a reputation for proven reliability for over twenty years. The traditional analog design works equally well as a front-of-house speaker, stage monitor, or side-fill cabinet. Featuring a 10” woofer and 1200 watts of peak power (500 watts program), the NX10C-2 is the most compact, portable speaker in the NX series. The input section features an XLR mic input and XLR, 1/4", and 1/8" line inputs. Link output allows multiple NX10C-2 cabinets to be chained together using a single input source. The variable EQ control is flat at the center position, boosts treble when turned clockwise, and boosts both treble and bass when turned counter-clockwise. The NX10C-2 has been designed for easy system integration. It can be mounted under light bars, saving stage space and eliminating the need for separate lighting and speaker stands. On tight stages, it can also be mounted below the front-of-house cabinets on a single speaker stand. The rear handle also functions as a tilt stand, allowing it to be used as a compact, wide-coverage floor monitor or center-fill cabinet. General Features: 1200 W Peak Power (500 W Program 10” LF Driver with 1” Voice Coi 1” Coaxial HF Drive 1x Combi-Jack Mic/Line, 1x Combi-Jack Line, and 1x 1/8" TRS Inputs 1x XLR Link Output Variable EQ Contour - Flat, Bright (Treble Boost), or Playback (Treble & Bass Boost Through-Hole Pole Mount for Mounting Multiple Cabinets on a Single Stand Rear Handle Functions as Tilt Stand Made in Canada Powered Loudspeaker 1200 W Peak (500 W Program) Max SPL 127 dB Peak (124 dB Continuous) Frequency Response (Hz +/- 3dB) 80 Hz - 20 kHz Crossover Frequency     2.5 kHz HF Driver(s) 1” Throat, 1.4” PETP Film HF Protection  Peak Limiter LF Driver(s) 10” with 2.5" Voice Coil LF Protection Thermal / Overcurrent HF Amplifier Type Class A/B LF Amplifier Type 3-Tier Class H Power Consumption 120 / 310 VA Inputs 1x Combi-Jack (Mic / Line) 1x Combi-Jack (Line) 1x 1/8" TRS (Line) Input Sensitivity (Vrms Sine) 1.23 Vrms Sine, +4 dBu Controls Mic Level Line Level EQ Contour Limiter Yes LED Indicators Power, Clip Bar Handles 1 (Back) Pole Mount Adapter (1 3/8 Pole Through) Enclosure Materials Injection-Molded Fiber-Reinforced ABS / Aluminum / 13-Ply Birch Dimensions: (DWH)13” x 13.5” x 12” (33 cm x 34.3 cm x 30.5 cm) Weight: 25 lbs / 11.3 kg  Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Yorkville Sound NX25P-2, 300W NX Series 2-Way Powered Loudspeaker - 12 Inch NX 12” Powered Loudspeaker NX loudspeakers have a history of traditional analog design and a reputation for road-tested reliability. Yorkville is proud to introduce the new NX12P, a thoroughly modern update to this classic series. This next-generation model offers advanced DSP, powerful limiting, extended connectivity, and exceptional sound. The NX12P works equally well as a front-of-house speaker, stage monitor, or side-fill cabinet. It features a 12” woofer and 4850 watts of peak power (1450 watts program).  In addition to the primary XLR input and output, the NX12P has an onboard three-channel mixer, so it doesn’t require an external console for small PA applications. Two mono channels each feature Combi-Jack inputs, phantom power,  switchable mic or line input levels, and switchable high-pass filters. The third channel accepts stereo 1/8" line or Bluetooth sources, including wireless stereo playback between two cabinets. The master section features a high-pass filter for use with a subwoofer or as a vocal monitor, and three selectable modes optimize EQ and dynamics for music playback, live performance, or stage monitor use. NX speakers have been trusted on stages worldwide for over 20 years, and the new NX12P is ready to inspire a new generation of performers. General Features: 4850 W Peak Power (1450 W Program) 12” LF Driver and 1” HF Driver Main Input & Output XLR Connections Onboard 3-Channel Mixer (2x Mono, 1x Stereo) with Phantom Power    Bluetooth® Wireless Streaming Switchable LF Rolloff for Use with Subwoofers Onboard DSP with 3 Voicing Modes Integrated Flying Hardware System Type: Powered Loudspeaker Power Rating: 4850W Peak (1450 W Program) Max SPL: 128 dB Peak Frequency Response (Hz +/- 3dB): 50 Hz – 20 kHz HF Driver(s):1” Exit Compression Driver LF Driver(s):12” In / Out Connections: Main In (XLR-F), Main Out (XLR-M) Channel 1 Input: 1 Combi-Jack (XLR / 1/4") Channel 1 Controls: Level, Input Type, High-Pass Filter Channel 2 Input: 1 Combi-Jack (XLR / 1/4") Channel 2 Controls: Level, Input Type, High-Pass Filter Channel 3 Input: 1/8" TRS, Bluetooth® Wireless Channel 3 Controls: Level Bar Handles: 2 (1 Side, 1 Top) Flypoints: 3 (2 Top, 1 Pullback) Flying Hardware:M8 Threading Pole Mount Adapter (1 3/8 1 (Bottom) Enclosure Materials: Polypropylene Grille: Perforated Metal Dimensions (DWH) :12.68” x 15.20” x 25.29” (32.2 cm x 38.6w cm x 64.2 cm) Weight: 45.3 lbs / 20.6 kg  Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Yorkville Sound NX55P-2, 2-Way Powered Loudspeaker (12 Inch) NX 12” Powered Loudspeaker NX loudspeakers have earned a reputation for proven reliability for over twenty years. The traditional analog design works equally well as a front-of-house speaker or stage monitor. Featuring a 12” woofer and 2000 watts of peak power (1000 watts program), the NX55P-2 is the most powerful speaker in the NX series. The rear panel features a master level control, a selectable LF roll off for use with a subwoofer or as a vocal monitor, and a switchable onboard mixer section. When enabled, this provides an XLR microphone input and 1/4" line inputs with level controls and 2-band EQ. Link inputs and outputs provide balanced connectivity to other cabinets. Up to three onboard mixers can be active in a linked system, providing up to three mic and six line inputs without requiring an external mixer. The NX55P-2's inputs and controls are well-protected, so it can be used in any orientation. It was carefully designed for low operating temperatures and reduced heat production to be placed close to walls, floors, and other speakers. General Features: 2000 W Peak Power (1000 W Program) 12” LF Driver with 3” Voice Coil 1.4” HF Driver 1x XLR Mic Input, 2x 1/4" Line Inputs, 1x XLR and 1x 1/4” Link Inputs 1x XLR and 1x 1/4" Link Outputs Integrated Mixer with 2-Band EQ Switchable LF Rolloff for Use with Subwoofers Integrated Flying Hardware Made in Canada System Type: Powered Loudspeaker Power Rating: 2000 W Peak (1000 W Program) Biampable: Self-Powered Biamp Operation Only: Yes Sensitivity (dB AT 1Watt/1m): 100 dB Max SPL: 134 dB Peak (128 dB Continuous) Frequency Response (Hz +/- 3dB): 45 Hz - 18 kHz Crossover Frequency: 2 kHz HF Driver(s): 1.4” Aluminum Diaphragm, 1” Exit HF Dispersion (°H x °V): 80° x 50° HF Protection: Thermal / Peak Limiter LF Driver(s): 12” with 3” Voice Coil LF Protection: Thermal / Overcurrent HF Amplifier Type: 2-Tier Class H LF Amplifier Type: Class D Power Consumption (typ/max): 120 / 310 VA Inputs: 1x XLR (Mic) 2x 1/4" (Line / CD) 1x XLR 1x 1/4" Link Inputs Input Sensitivity (Vrms Sine): 1.23 Vrms Sine, +4dBv Controls: Master Level, LF Rolloff (60 Hz / 100 Hz) Mixer On / Off Mic Level Line / CD Level Treble Bass Mixer Controls: Line Level Mic Level Bass Treble Limiter: Yes LED Indicators: Power, Clip, Limit Bar Handles: 1 (Side) Flypoints : 4 (2x Top, 2x Bottom), 1x Pullback Flying Hardware: 1/4-20 Optional Flying Hardware: NXF Flyware Pole Mount Adapter (1 3/8  1 (Bottom) Enclosure Materials: Molded Polypropylene Dimensions (DWH) : 12.25" x 16" x 26.5" (31.1 cm x 40.6 cm x 67.3 cm) Weight: 41 lbs / 18.6 kg  Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

The Yorkville Sound NX750P-2 is 2-Way Powered Loudspeaker represents the culmination of all Yorkville's research and development in-molded technology to this point. The injection-molded, the internally multi-fin-braced enclosure supports a high-performance 15" high-powered woofer and rotatable 80° x 50° custom ABS waveguide horn, all protected by a perforated metal grille. A rugged carrying handle, speaker stand socket and reinforced threaded fly points are also built-in. Innovative bi-amplified power module uses a two-tier class H linear technology to produce loud clean transients to match the high output of the woofer. Its two-tier design technology is lower in weight and more efficient than conventional amplifiers while providing higher headroom and lower operating temperature - a perfect solution for powering the top end. A newly designed switch-mode amplifier drives the woofer in the NX750P-2. The amplifier uses Class D switching technology, in part to reduce overall weight - it also runs cooler. Class D technology is similar to the power supply found in the trend-setting Elite EF500P's amplifier. Of particular significance is this technology's inherently low heat production which ensures reliability in a wide range of environments. Then the NX750P-2's combination of neodymium woofer magnetics and lightweight composite enclosure materials further ensure that all this remarkable performance comes in a lightweight, durable package. A "loop" output allows multiple NX750P-2s to be interconnected with mic or patch cables and controlled by one cabinet's mixer stage or direct line input. Here's another versatile trick - you can combine NX750P-2's using the mixer inputs on each cabinet and coupling the loop outputs to provide a complete, easy-to-use PA with its own microphone inputs and line inputs for background music or other audio. It's ideal for duos in small clubs, also presentations or teaching applications. Many NX750P-2's can be linked together but a maximum of three "mixers" can be active at any one time making three mic sources and six line sources available in any three-or-more-cabinet arrays. The trim control allows looped cabinets to be individually adjusted in level. Finally, the microphone input has bass and treble equalization and a 100Hz selectable high-pass filter appropriate for vocal-only applications or to let you add NX or Elite powered subwoofers, without a crossover. Acoustic performance is ultimately the most important factor in any loudspeaker. The NX750P-2 offers 134dB (Peak) of maximum sound pressure potential and a wide, smooth audio range to ensure fidelity throughout the audience area. Product Specifications: System Type: 2-Way Active or Passive: Active Program Power (Watts): 750 Watts (1600 Watts Peak) Biampable: Self Powered Max SPL (dB): 133dB Peak (127dB Continuous) Frequency Response (Hz +/- 3dB): 50 - 26k Crossover Frequency (Hz): 1400 Driver Configuration: 15-inch / 1.5-inch Power Cable: Yes Power Switch: Yes EQ Controls: 100Hz HP Filter (LF Rolloff) LED Indicators: Power/Clip/Limit Dimensions (DWH xbackW, inches): 15 x 22 x 32 x 9.5 Weight (lbs/kg): 62 / 28

Yorkville Sound NXF35U, U-Bracket Flying Hardware Kit The Yorkville NXF35U kit allows enclosures to be mounted in more ways than standard shackles and cables allow. Using the NXF35U bracket, the multiple fly-point options will enable the rig to be flown at different angles. The bracket also helps secure the NX enclosure to the truss or roofing systems. The NXF35U is easily mounted strategically to the top and bottom of the enclosure. The NX enclosure can also be rotated up to 30 degrees across the horizontal plane (within the bracket housing). Image is for illustrative purposes only. Speakers are not included. General Features: Weight: 3 lbs (1.36 kg) Dimensions: 12 x 6 x 2 inches (30 x 15 x 5 cm) Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

The Yorkville Sound NXF600A is an array link bracket designed to link two NXF35U loudspeakers together to create a single, wider array. It is made of steel and features a zinc-plated finish for durability. The bracket includes all necessary mounting hardware. Product Specification:   Dimensions: 17.5 x 4.1 x 1.25" (44 x 10.5 x 3.2 cm) Weight: 2.2 lb (1 kg)

The Yorkville Sound NXF600W is a wall mount bracket designed to mount any 15" NX series loudspeaker to a wall surface. It is made of steel and features a zinc-plated finish for durability. The bracket includes all necessary mounting hardware, including a set of flying hardware that allows the speaker to be angled for optimum sound coverage. Product Specification:   Dimensions: 36.0 x 5.5 x 1.5" (92 x 14 x 4 cm) Weight: 6.6 lb (3 kg)

Designed for maximum versatility, the PS10P works equally well as a Front-of-House cabinet, side fills cabinet or floor monitor. The innovative and highly efficient passive cooling scheme ensures the PS10P will operate in any environment without the need of noisy internal dust collecting fans. Integrated reinforced fly points ensure the PS10P can be flown quickly and easily in any fixed installation. Integrated DSP ensures the PS10P can operate in any application without complex external processing. A simple one-button high pass filter switch rolls off low-frequency material when PS10P is used with any Paraline Series or powered élite System subwoofer. Bass boost delivers remarkably improved bottom end response from the PS10P without cluttering midrange program or affecting the cabinet's overall intelligibility - making it the perfect small speaker solution for larger events where additional subwoofer support is not available. Innovative multi-band limiting allows the cabinet to deliver maximum output and remarkably event frequency response while protecting the PS10P's speaker components. Unlike competitive powered cabinets, the Parasource Series multi-band limiting scheme ensures essential elements like vocals and solo instruments in the essential midrange band aren't being modulated by transient attacks of low-frequency material like kick drums and bass tracks. This delivers an extremely smooth and precise mix even at the highest output levels the cabinet can produce. Rugged yet lightweight ABS cabinet and baffle design ensure unmatched long term reliability in the field. Product Specifications: Dimensions (DxWxH): 12 x 14 x 23. Dimensions (DxWxH): 30.5 x 35.5 x 58.5. Weight: 40 lbs. / 18.2 kg. System Type: Active Loudspeaker. Active or Passive: Active. Program Power (Watts): 800 watts (1600 watts peak). Max SPL (dB): 127dB Peak (124dB Continuous). Frequency Response (Hz +/- 3dB): 55hz to 20kHz. Driver Configuration: 10-inch / 1-inch.

Yorkville Sound PS12P is a Parasource Series 1400W Active Loudspeaker. the PS12P uses a high power 12-inch woofer (with 3-inch voicecoil) to deliver maximum tone and low-frequency response. The focused 85° x 50° (H x V) conical horn delivers improved constant directivity and better midrange response than competitive cabinets in this class. Integrated DSP ensures the PS12P can operate in any application without complex external processing. A simple one-button high pass filter switch rolls off low frequency material when PS12P is used with any Paraline Series or powered élite System subwoofer. Bass boost delivers remarkably improved bottom end response from the PS12P without cluttering the midrange program or affecting the cabinet's overall intelligibility - making it the perfect small speaker solution for larger events where additional subwoofer support is not available. Innovative multi-band limiting allows the cabinet to deliver maximum output and remarkably event frequency response while protecting the PS12P's speaker components. Unlike competitive powered cabinets, the Parasource Series multi-band limiting scheme ensures essential elements like vocals and solo instruments in the essential midrange band aren't being modulated by transient attacks of low-frequency material like kick drums and bass tracks. This delivers an extremely smooth and precise mix even at the highest output levels the cabinet can produce. Designed for maximum versatility, the PS12P works equally well as a Front-of-House cabinet, side fills cabinet or floor monitor. An innovative and highly efficient passive cooling scheme ensures the PS12P will operate in any environment without the need for noisy internal dust collecting fans. Integrated reinforced fly points ensure the PS12P can be flown quickly and easily in any fixed installation. Rugged yet lightweight ABS cabinet and baffle design ensure unmatched long-term reliability in the field. Product Specifications: System Type: Active Loudspeaker Active or Passive: Active Program Power (Watts): 1400 watts (4400 watts peak) Max SPL (dB): 133dB Peak (128dB Continuous) Frequency Response (Hz +/- 3dB): 45Hz to 26kHz Crossover Frequency (Hz): 1.25kHz Driver Configuration: 12-inch / 1-inch Power Cable: Detachable IEC Power Consumption (typ/max): 2.4A/3.0A @ 120Vac 1.2/2.5 A @230Vac Grille: Perforated Metal Dimensions (DWH xbackW, inches): 13.5 x 16.7 x 26.5 Weight (lbs/kg): 60 / 26.3

The Yorkville Sound PS12S 12-inch - 900-watt ultra compact single 12-inch active PS12S bass reflex subwoofer is the ideal companion sub for the PS10P full range loudspeaker system. Solid 15mm birch plywood cabinet construction and an efficient Class-D power amplifier design provide unmatched long-term reliability in the field. Product Specification: Active or Passive: Active Power Rating (Watts): 900 Watts Program (1800 Watts Peak) Max SPL (dB): 129dB Peak (123dB Continuous) Frequency Response (Hz +/- 3dB): 45Hz - 100Hz Crossover Frequency (Hz): fixed @ 100Hz Driver Configuration: 1x12-inch (Bass Reflex Cabinet) LF Driver(s): 1x12-inch Long Throw Ceramic w/ 3-inch VoiceCoil Power Consumption: 3.3 Amps Inputs: XLR Balanced Line Level Input, ¼-inch Line or Speaker Level Input Outputs: XLR Balanced Link Output, ¼-inch Link Output Controls: Output Level, Line/Speaker Level Switch, Power/Limit/Clip LED's Enclosure Materials: 15mm Birch Baffle Material: 15mm Birch Covering / Finish: Paint Dimensions (DWH xbackW, inches): 22.8 x 14.7 x 16.85 Dimensions (DWH xbackW, cm): 57.9 x 37.4 x 42.8 Weight (lbs/kg): 65 / 29.6

The Yorkville Sound PS12SF 12-inch - 900-watt ultra compact single 12-inch active PS12SF bass reflex subwoofer with 8 Fly Points for installation is the ideal companion sub for the PS10P full range loudspeaker system. Solid 15mm birch plywood cabinet construction and an efficient Class-D power amplifier design provide unmatched long-term reliability in the field. Product Specification: Active or Passive: Active Power Rating (Watts): 900 Watts Program (1800 Watts Peak) Max SPL (dB): 129dB Peak (123dB Continuous) Frequency Response (Hz +/- 3dB): 45Hz - 100Hz Crossover Frequency (Hz): fixed @ 100Hz Driver Configuration: 1x12-inch (Bass Reflex Cabinet) LF Driver(s): 1x12-inch Long Throw Ceramic w/ 3-inch VoiceCoil Power Consumption: 3.3 Amps Inputs: XLR Balanced Line Level Input, ¼-inch Line or Speaker Level Input Outputs: XLR Balanced Link Output, ¼-inch Link Output Controls: Output Level, Line/Speaker Level Switch, Power/Limit/Clip LED's Enclosure Materials: 15mm Birch Baffle Material: 15mm Birch Covering / Finish: Paint Dimensions (DWH xbackW, inches): 22.8 x 14.7 x 16.85

Yorkville Sound PS15P is a 15-Inch Active Loudspeaker. The PS15P delivers maximum bottom end from a high power 15-inch ceramic woofer (with 3-inch voicecoil). A focused 85° x 50° (H x V) conical horn delivers improved constant directivity and better midrange response than competitive cabinets in this class. Integrated DSP ensures the PS15P can operate in any application without complex external processing. A simple one-button high pass filter switch rolls off low-frequency material when PS15P is used with any Paraline Series or powered élite System subwoofer. Bass boost delivers remarkably improved bottom end response from the PS15P without cluttering the midrange program or affecting the cabinet's overall intelligibility - making it the perfect small speaker solution for larger events where additional subwoofer support is not available. Innovative multi-band limiting allows the cabinet to deliver maximum output and remarkably event frequency response while protecting the PS15P's speaker components. Unlike competitive powered cabinets, the Parasource Series multi-band limiting scheme ensures essential elements like vocals and solo instruments in the essential midrange band aren't being modulated by transient attacks of low-frequency material like kick drums and bass tracks. This delivers an extremely smooth and precise mix even at the highest output levels the cabinet can produce. Designed for maximum versatility, the PS15P works equally well as a Front-of-House cabinet, side fill cabinet, or floor monitor. An innovative and highly efficient passive cooling scheme ensures the PS15P will operate in any environment without the need of noisy internal dust collecting fans. Integrated reinforced fly points ensure the PS15P can be flown quickly and easily in any fixed installation. Rugged yet lightweight ABS cabinet and baffle design ensure unmatched long-term reliability in the field. Product Specifications: System Type: Active Loudspeaker Active or Passive: Active Program Power (Watts): 1400 watts (4400 watts peak) Max SPL (dB): 134dB Peak (129dB Continuous) Frequency Response (Hz +/- 3dB): 45Hz to 26kHz Crossover Frequency (Hz): 1.0kHz Driver Configuration: 15-inch / 1-inch HF Driver(s): 38mm Voicecoil w/ 1-inch Exit HF Dispersion (°H x °V): 85 x 50 HF Protection: Thermal/Peak Limiter LF Driver(s): 15-inch (3-inch voice coil) LF Protection: Thermal/Multiband Peak Limiter Cooling Scheme: Passive Power Cable: Detachable IEC Power Consumption (typ/max): 2.4A/3.0A @ 120Vac 1.2/2.5 A @230Vac Dimensions (DWH xbackW, inches): 14.2 x 20.5 x 30.75 Weight (lbs/kg): 65 / 29.5