metra (563)

Metra 99-9800 1998-2013 Harley-Davidson Touring Protective Radio/CD Player Cover Harley-Davidson Touring 1998-2013 General Features: Allows for installation of an aftermarket Single-Din car stereo Compatible with select 1998-2013 vehicles from Harley-Davidson It comes with a water-resistant radio face cover Cover is attached to the kit using uniquely designed hinges Built-in rubber opening gasket with magnetic latches Water resistant cover Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Metra 40-VW12 Antenna Adapter 1988-2005 Audi/BMW/Mercedes/VW Vehicles (VWAB) Metra Electronics 40-VW12 Factory Antenna Adapter to Aftermarket Radio AdapterFor Select 1988-2005 Audi/BMW/Mercedes/VW Vehicles (VWAB) Antenna Adapter Cable Plug for Select Audi, BMW, And Volkswagen Models. Installing An Aftermarket Radio. Then You Need This Part. This Antenna Adapter Is Used to Adapt the Factory Antenna End to The Standard Motorola Male End that needs to Plug into Your New Aftermarket Radio. This Plug May Not Work If You Have Installed an Aftermarket Antenna, As Most of Those, Do Not Require Adaptation. There Are No Modifications Necessary.General features: • Replacement Antenna Adapter for Aftermarket Radio • Compatible With 1990-Up BMW Mercedes Audi VW Vehicles • Converts Antenna Lead to Standard Motorola Male • Use When Replacing Factory Radio • Short Version Of VW-A16L • Quick And Easy Installation • Quality Crafted to Factory's Rigid Specification Compatibility Vehicle List:Audi: • 2000-2001 A4 • 2000-2001 A6 • 2000-2001 A8 • 1996-1998 Cabriolet • 2000-2001 S4 • 2000-2001 S6 • 2000-2001 S8 BMW: • 1984-2001 3-Series • 1991-2001 5-Series • 1987-2001 7-Series • 1991-1997 8-Series • 1989-2001 M3 • 1988-2001 M5 • 1987-1990 M6 • 1996-2001 Z3 Buick: • 2000-2005 Le Sabre Cadillac: • 2003-2007 CTS • 2004-2006 SRX Ford: • 2000-2004 Focus W/O Blaupunkt Radio • 2010-2011 Transit Connect Mercedes Benz: • 1986-1996 300 Series • 2001-2004 C-Class • 1995-2001 CLK-Class • 1994-1999 E-Class • 1994-1999 S-Class • 1994-1999 SL-Class Mercury: • 2001-2002 Cougar Mitsubishi: • 2008-2010 Raider Pontiac: • 2000-2004 Bonneville • 2004-2006 GTO Porsche: • 1996-2003 911 Carrera • 1984-1995 928 • 1992-1995 968 • 1997 996 • 1997-2003 Boxster Smart: • 2008-2010 Fortwo Volkswagen: • 1995-2001 Cabrio • 1990-1994 Corrado • 1993-2003 Eurovan • 1985-1998 Golf • 1985-1998 Jetta • 1990-2000 Passat • 2000-2002 Passat W/ Factory Single DIN Radio   Authorized Internet Dealer Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Metra Axxess AXDIS-CL2 Wiring Interface: Install a new car stereo and retain the safety warning chimes in select 2000-2013 vehicles from Chevrolet, GMC, and Pontiac Replacement Part for: AXGMLN-04, AXGMLN-01 General Features: Compatible with select 2000-2013 vehicles from Chevrolet, GMC, and Pontiac Designed to install a new aftermarket car stereo Provides accessory power (12-volt 10-amp) Retains R.A.P. (retained accessory power） Provides NAV outputs (parking brake, reverse, and V.S.S) Retains all safety and warning chimes Retains OnStar /OEM Bluetooth Adjustable volume for OnStar Retains factory satellite radio Adjustable gain control for overall volume （digital amplified models only） High-level speaker input For non-amplified models or analog/digital amplified models Retains balance and fade （including digital fader） Micro-B USB updatable Authorized Internet Dealer 1-year Manufacturer's Warranty Compatible Vehicles: Buick Century 2004-2005 Rainier 2004 (1) Rainier 2005-2007 Regal 2004 Rendezvous 2002-2007 Terraza 2005-2007 Cadillac Escalade / Escalade ESV & EXT 2003-2006 (3) Chevrolet Avalanche 2003-2006 (2) Cavalier 2000-2005 Colorado 2004-2014 Corvette 2005-2013 Express 2003-2007 Impala 2000-2005 Kodiak C4500-C8500 2003-2009 Malibu 2001-2003 Malibu Classic 2004-2005 Monte Carlo 2000-2005 Silverado 2003-2006 (2) Silverado Classic 2007 (2) SSR 2003-2006 (2) Suburban 2003-2006 (2) Tahoe 2003-2006 (2) Trailblazer 2002-2004 (1) Trailblazer 2005-2009 Uplander 2005-2008 Venture 2000-2005 GMC Canyon 2004-2012 Envoy 2002-2004 (1) Envoy 2005-2009 Savana 2003-2007 Sierra 2003-2006 (2) Sierra Classic 2007 (2) Top Kick C4500-C8500 2005-2009 Yukon / Yukon XL 2003-2006 (2) Hummer H2 2003-2007 (3) H3 / H3T 2006-2010 Isuzu Ascender 2003-2008 I Series 2006-2008 Oldsmobile Alero 2001-2004 Bravada 2002-2004 (1) Intrigue 2002 Silhouette 2000-2004 Pontiac Aztec 2001-2005 Grand Am 2001-2005 Grand Prix 2004-2008 Montana 2005-2006 Sunfire 2000-2005 SAAB 9-7× 2005-2009 Saturn Relay 2005-2007 (1) These vehicles have a digital amp option. Please reference the Service Parts Identification sticker located in the glove box for the RPO code UQA. If UQA is present, then the vehicle is equipped with a digital amplifier. (2) These vehicles have a digital amp option. Please reference the Service Parts Identification sticker located in the glove box for the RPO code Y91, If Y91 is present, then the vehicle is equipped with a digital amplifier. (3) These vehicles are standard for a digital amplifier. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Metra AXDIS-MB132 Mercedes CLS/E/SLK with MOST25 Amp SWC Retention 2002-2011 General Features: Provides accessory power. Designed for amplified models. Provides NAV outputs (parking brake, reverse, speed sense). Retains audio controls on the steering wheel. Retains balance Micro-B USB updatable Authorized Internet Dealer 1-year Manufacturer's Warranty Applications: Mercedes CLS (W211) 2006-2011 E-Class (C219) 2003-2008* SLK (R171) 2005-2008* *This year's range includes two radio possibilities for the E-Class or SLK; please see below for ways to distinguish which interface kit you need. *Vehicles equipped with Command NTG1 will use the AXDIS-MB132. NTG1 radios will be built by Harman/Becker and have the 6-disc Changer separate from the radio. If equipped with a SINGLE-disc player, it will be built into the radio. They will typically have buttons on the sides of and below the radio screen. Also, the optical light will come from the fiber cable when removed. * Vehicles equipped with Command NTG2.5 will use the AXDIS-MB82. Alpine will build NTG2.5 radios, which will have the 6-disc changer built into them. The buttons will not be directly below the radio screen, and the optical light will come from the radio when the fiber cable is removed. Mercedes CLS (W211) 2006-2011 E-Class (C219) 2003-2008* SLK (R171) 2005-2008* *There are two radio possibilities for the E-Class or SLK in this year's range; please see below for ways to distinguish which interface kit you need. *Vehicles equipped with Command NTG1 will use the AXDIS-MB132. NTG1 radios will be built by Harman/Becker and have the 6-disc Changer separate from the radio. If equipped with a SINGLE-disc player, it will be built into the radio. They will typically have buttons on the sides of and below the radio screen. Also, the optical light will come from the fiber cable when removed. *Vehicles equipped with Command NTG2.5 will use the AXDIS-MB82. Alpine will build NTG2.5 radios, and the 6-Disc changer will be built into the radio. They will not have buttons directly below the radio screen; the optical light will come from the radio when the fiber cable is removed. Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Metra AXDIS-PO62 Compatible for Porsche 2009-2012 MOST25 Radio Replacement INTFC w/SWC This vehicle-specific interface is designed for use when replacing the factory radio in vehicles equipped with MOST25 amplified audio systems, such as those using Metra Electronics dash kits. It provides accessory 12-volt power, parking brake, reverse, and speed sense NAV outputs, retains audio controls on the steering wheel, and is micro “B” USB updatable. General Features:  Designed for amplified systems  Provides accessory power (12-volt 10-amp)  Provides NAV outputs (parking brake, reverse, and speed sense)  Retains R.A.P. (Retained Accessory Power)  Retains audio controls on the steering wheel  Easy to set DIP switches for SWC configuration  Retains balance  Micro “B” USB updatable This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Axxess XSVI-9701-NAV Radio Replacement Interface for 2018-2018 Polaris Saddle Tramp is Metra's line of high-quality motorcycle accessories that will enhance your riding experience and will have you hitting the open road in style. The XSVI series interface is an inexpensive solution that provides +12-volt accessory power output for select vehicles that data control signals instead of conventional power signals. If the vehicle is equipped with retained accessory power features, the XSVI will keep those features. Also provides outputs for VSS, Reverse, and Parking Brakes. General Features: Radio replacement interface Compatible with 2018-2018 Polaris connect a new stereo and keep factory functions retains your USB port and Speed Dependent Volume Control function Used when installing an aftermarket stereo Retains factory USB port Provides Nav outputs (parking brake, reverse, and speed sense) provides parking brake, VSS (Vehicle Speed Sensor), and reverse output connections for navigation receiver installations Pre-wired ASWC-1 harness, Axxess ASWC-1 steering wheel control retention sold separately Only retains speed-dependent volume control Micro B USB Updatable Authorized Internet Dealer Compatible Vehicles: 2018 Polaris Slingshot Grand Touring LE 2018 Polaris Slingshot S 2018 Polaris Slingshot SL 2018 Polaris Slingshot SLR 2018 Polaris Slingshot SLR LE What's in the box: Axxess XSVI-9701-NAV Interface Harness owner's manual Radio replacement interface module LD-XSVI-9701NAV harness Installation Instructions ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Metra Axxess XSVI-6523-NAV Wiring Interface Connect a new stereo and retain Retained Accessory Power in select 2013-up Ram 1500 models without the factory touchscreen display The XSVI-6523-NAV interface from Axxess lets you connect your new car stereo to your Ram's factory wiring harness. It provides the power, ground, and speaker connections for hooking up your new car stereo. This interface also supports Retained Accessory Power (RAP) which keeps the music going until the door is opened.If you're installing a navigation receiver, the XSVI-6523-NAV wiring interface also offers the parking brake, reverse, mute, and Vehicle Speed Sensor (V.S.S.) outputs that you'll need. You can plug the Axxess steering wheel interface (sold separately) directly into this interface, and keep your steering wheel audio controls working with your new car stereo. General Features: Accessory and Navigation Interface Compatible with 2013-2016 Ram, Chrysler, Dodge Used in non-amplified systems or when replacing an amplified system USB updatable Provides parking brake, reverse, and V.S.S. NAV outputs High-level speaker input Retains R.A.P. (Retained Accessory Power) Prewired Axxess ASWC-1 harness included (ASWC-1 not included) Authorized Internet Dealer 1-year Manufacturer's Warranty Compatibility List: Chrysler: 2015 - 2016 2001 Dodge: 2013 - 2016 Dart2 Fiat: 2014 - 2016 500L 2016 500X Jeep: 2014 - 2016 Cherokee Sport 2015 - 2016 Renegade RAM Truck: 2013 - 2016 1500/2500/35003 2013 - 2016 Chassis Cab 3500/4500/55003 2014 - 2016 Promaster4 2015 - 2016 Promaster City What's in the box: Axxess XSVI-6523-NAV Wiring Interface owner's manual Replacement radio interface module (attached vehicle/radio/swc harness) Application/Wiring sheet Compatibility note: The Axxess XSVI-6523-NAV interface will not work with Ram models that have the factory 8" touchscreen display. If the factory Alpine audio system is present, this interface can be used although new speaker wires must be run to the output section of the factory amplifier. Compatible only with LX Model equipped with 3" Display Not compatible with 8.4" Display Not compatible with 8" Display Only compatible with 5" Display ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Metra Axxess XSVI-6523-NAV Wiring Interface Connect a new stereo and retain Retained Accessory Power in select 2013-up Ram 1500 models without the factory touchscreen display The XSVI-6523-NAV interface from Axxess lets you connect your new car stereo to your Ram's factory wiring harness. It provides the power, ground, and speaker connections for hooking up your new car stereo. This interface also supports Retained Accessory Power (RAP) which keeps the music going until the door is opened.If you're installing a navigation receiver, the XSVI-6523-NAV wiring interface also offers the parking brake, reverse, mute, and Vehicle Speed Sensor (V.S.S.) outputs that you'll need. You can plug the Axxess steering wheel interface (sold separately) directly into this interface, and keep your steering wheel audio controls working with your new car stereo. General Features: Accessory and Navigation Interface Compatible with 2013-2016 Ram, Chrysler, Dodge Used in non-amplified systems or when replacing an amplified system USB updatable Provides parking brake, reverse, and V.S.S. NAV outputs High-level speaker input Retains R.A.P. (Retained Accessory Power) Prewired Axxess ASWC-1 harness included (ASWC-1 not included) Authorized Internet Dealer 1-year Manufacturer's Warranty Compatibility List: Chrysler: 2015 - 2016 2001 Dodge: 2013 - 2016 Dart2 Fiat: 2014 - 2016 500L 2016 500X Jeep: 2014 - 2016 Cherokee Sport 2015 - 2016 Renegade RAM Truck: 2013 - 2016 1500/2500/35003 2013 - 2016 Chassis Cab 3500/4500/55003 2014 - 2016 Promaster4 2015 - 2016 Promaster City What's in the box: Axxess XSVI-6523-NAV Wiring Interface owner's manual Replacement radio interface module (attached vehicle/radio/swc harness) Application/Wiring sheet Compatibility note: The Axxess XSVI-6523-NAV interface will not work with Ram models that have the factory 8" touchscreen display. If the factory Alpine audio system is present, this interface can be used although new speaker wires must be run to the output section of the factory amplifier. Compatible only with LX Model equipped with 3" Display Not compatible with 8.4" Display Not compatible with 8" Display Only compatible with 5" Display ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Metra BC-HDR-K1 Saddle Tramp interface Harley-Davidson Street Glide 2014 -Up. Upgrade your Harley-Davidson motorcycle to a larger aftermarket radio screen and retain the use of the built-in handlebar audio controls using Saddle Tramp’s installation kit. This kit is designed specifically for installing an ISO Double-DIN radio with an “L” shaped chassis design with the chassis at the top. It includes an interface with a water-resistant enclosure that allows the original factory handlebar audio controls, if equipped, to work with the new aftermarket radio. An antenna adapter is also included for a complete installation. (Radio not included). Refer to the vehicle applications tab or chart for more information. This kit can only be used with an ISO DDIN Radio that has an “L” shaped chassis design with the chassis at the t.opGeneral Features: Stereo installation kit designed for an ISO Double-DIN radio* Includes an improved new interface The Saddle Tramp interface retains built-in handlebar audio controls Water-resistant enclosure for added protection of the interface Made from the highest quality ABS plastic for an original factory-like fit and finish Includes antenna adapter, brackets, and hardware parts needed with detailed installation instructions A tech support number is available for installation help 7 days a week Color: Black Authorized Internet Dealer 1-year Manufacturer's Warranty Vehicle Fitment: Harley-Davidson® Street Glide 2014-Up Electra Glide 2014-Up Ultra 2014-Up Limited 2014-Up Road Glide 2015-Up Note: Non-amplified models only What’s in the BC-HDR-K1 package: Radio housing and brackets Wiring harness 40-EU10 antenna adapter Interface module with water-resistant enclosure and harness Screws and hardware BC-HDR-K1 Installation instructions ⚠️Warning:Cancer and Reproductive Harm

Metra BC-HDR-K2 DDIN Radio Provision Harley-Davidson FLHTP (with Police Package). Add an aftermarket radio to your Police Edition Harley-Davidson motorcycle using Saddle Tramp’s radio installation kit. This kit is designed specifically for installing an ISO Double-DIN radio with an “L” shaped chassis design with the chassis at the top. It includes a wiring harness and an interface with a water-resistant enclosure. If equipped with OEM handlebar audio controls, the interface will retain the use of these controls to work with the aftermarket radio. The interface also provides accessory power and integrates front and rear OEM speakers. An antenna adapter is also included for a complete installation. Refer to the vehicle applications tab or chart for more information. General Features: Stereo installation kit designed for an ISO Double-DIN radio* Includes harnessing and interface Includes one Saddle Tramp interface module to: Retain use of OEM handlebar controls if equipped Provide accessory power (10-amp) Tap into the CAN data system with the included T-harness Add front and rear OEM speakers with the included harness with OEM connectors Water-resistant enclosure for added protection of the interface Includes threaded brass inserts to hold an upper metal tray Made from the highest quality ABS plastic for an original factory-like fit and finish Includes antenna adapter, brackets, and hardware parts needed with detailed installation instructions A tech support number is available for installation help seven days a week Color: Black Authorized Internet Dealer 1-year Manufacturer's Warranty What’s in the BC-HDR-K2 package: Double-DIN* radio housing and brackets BC-9700P harness Interface harness Water-resistant interface 40-EU10 antenna adapter Screws and hardware BC-HDR-K2 Installation instructions Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Metra BC-HDR-K3 Saddle Tramp interface Harley-Davidson Street Glide 2014 -Up. Upgrade your Harley-Davidson motorcycle to a larger aftermarket radio screen and retain the use of the built-in handlebar audio controls using Saddle Tramp’s installation kit. Replace the radio in your Harley-Davidson® motorcycle with a 2” tall (Single-DIN) aftermarket radio and retain the use of the built-in handlebar audio controls and other features using Saddle Tramp’s installation kit. This kit includes an interface with a water-resistant enclosure that allows the original factory handlebar audio controls, if equipped, to work with the new aftermarket radio. It also includes an LCD screen to display the oil pressure and EITMS status so you can still see this information after replacing the factory radio. An antenna adapter and harness are also included for a complete installation. (Radio not included). Refer to the vehicle applications tab or chart for more information. General Features: Stereo installation kit designed for an ISO Single-DIN radio* Stereo installation kit designed for a 2” tall Single-DIN radio Includes one Saddle Tramp interface module to: Retain built-in handlebar audio controls Retain balance Provide accessory power (12-volt 10-amp) Includes LCD screen to display oil pressure and EITMS status Saddle Tramp interface retains built-in handlebar audio controls Water-resistant enclosure for added protection of the interface Made from the highest quality ABS plastic for an original factory-like fit and finish Includes antenna adapter, brackets, and hardware parts needed with detailed installation instructions A tech support number is available for installation help 7 days a week Color: Black Authorized Internet Dealer 1-year Manufacturer's Warranty Vehicle Fitment: Harley-Davidson® Street Glide 2014-Up Electra Glide 2014-Up Ultra 2014-Up Limited 2014-Up Road Glide 2015-Up Note: Non-amplified models only What’s in the BC-HDR-K3 package: Radio housing and brackets Wiring harness 40-EU10 antenna adapter Interface module with water-resistant enclosure and harness LCD screen and back plate Screws and hardware Installation instructions ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Metra BC-HDR-K4 Single-Din Radio Provision Harley-Davidson FLHTP (with Police Package) Add a 2” tall (Single-DIN) aftermarket radio to your Police Edition Harley-Davidson® motorcycle using Saddle Tramp’s radio installation kit. This kit includes a wiring harness and an interface with a water-resistant enclosure, along with an LCD screen to display the oil pressure and EITMS status. If equipped with OEM handlebar audio controls, the interface will retain the use of these controls to work with the aftermarket radio. The interface also provides accessory power and is used to integrate front and rear OEM speakers. An antenna adapter is also included for a complete installation. Refer to the vehicle applications tab or chart for more information. General Features: Stereo installation kit designed for a 2” tall Single-DIN radio Includes harnessing and interface Includes one Saddle Tramp interface module to: Retain use of OEM handlebar controls, if equipped Retain balance Provide accessory power (12-volt 10-amp) Includes LCD screen to display oil pressure and EITMS status Includes water-resistant enclosure for added protection of the interface Includes threaded brass inserts to hold the upper metal tray Made from the highest quality ABS plastic for an original factory-like fit and finish Includes antenna adapter, brackets, and hardware parts needed with detailed installation instructions Interface is Micro “B” USB updatable A tech support number is available for installation help 7 days a week Color: Black Authorized Internet Dealer 1-year Manufacturer's Warranty What’s in the BC-HDR-K4 package: Single-DIN radio housing and brackets BC-9700P harness Interface harness Water-resistant interface 40-EU10 antenna adapter LCD screen and backplate Screws and hardware BC-HDR-K4 Installation instructions ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov