

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream BX-15 Digital Bass Reconstruction Processor
$89.99
$157.98
Soundstream BX-15 Digital Bass Reconstruction Processor
General Features:
Dash Mount Remote Control
Bass Restoration Lighted Display
Parametric Bass Control
PFM Subsonic Filter
Balanced Inputs
Bass Output Control
PWM High Head Room Power Supply
Output Level: 13.5 volt
Frequency Response: 10Hz 100KHz
THD: 0.003%
S/N Ratio: 130dB
Balanced Input Noise Rejection: 60 dB
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream BX-20Z Digital Bass Reconstruction Processor
$78.99
$157.98
Soundstream BX-20Z Digital Bass Reconstruction Processor
General Features:
BX Features
Dash Mount Remote Control
Bass Restoration Lighted Display
Parametric Bass Control
PFM Subsonic Filter
Balanced Inputs
Bass Output Control
PWM High Head Room Power Supply
Output Level: 13.5 volt
Frequency Response: 10Hz 100KHz
THD: 0.003%
S/N Ratio: 130dB
Balanced Input Noise Rejection: 60 dB
⚠️Warning:Cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream BX-23Q Bass Processor Reconstruction with Remote + Free Absolute Electrical Tape+ Phone Holder
$89.99
$179.99
Soundstream BX-23Q Bass Processor Reconstruction with Remote + Free Absolute Electrical Tape+ Phone Holder
They say music soothes the soul, but poor control of your system can kill the harmonics of a beautiful song or road trip. If you want to extend great-sounding music from your source to your amps, then get yourself a Soundstream Digital Bass Reconstruction Processor.
The BX digitally maximizes the ultra-low bass on all types of recorded material. The processor detects bass harmonics, then digitally recreates the original essentials for the incredible punch and impact of live music. Basically, you get more bass! Works great for music or factory radios that forgot we enjoy bass response in our systems! EDM, Banda, Rock, Jazz… No Problem!
Bass Reconstruction Processor
SWEEP: Select the frequency boosted by the equalizer. This is the “center frequency,” which can be as low as 27Hz or 63Hz. Choosing this frequency depends on your taste in music.
WIDTH: increases or decreases the bandwidth range, or “Q,” boosting frequencies near the “center frequency.” Narrow Q focuses on harmonics immediately surrounding the center frequency. Wide Q unlocks harmonics all around the center frequency.
DASH CONTROL: included with this bass processor can be mounted anywhere in the vehicle, but easy adjustment from the driver seat is recommended. The output level of the Bass Equalizer can be controlled.
General Features:
BX-23Q Bass Reconstruction Processor
3-band bass frequency equalizer, 50 Hz, 125 Hz, 315 Hz @ -12 to 12dB
Frequency sweep adjustment at 27-63Hz
12V max 2-channel low-level RCA input
Dash-mountable remote with subwoofer level control and subsonic filter, 35-80Hz
RGB LED tarantula on top
Authorized Internet Dealer
1-year Manufacturer's Warranty
Dash Mount Remote Control
Bass Restoration Lighted Display
Parametric Bass Control
PFM Subsonic Filter
Balanced Inputs
Bass Output Control
PWM High Head Room Power Supply
Output Level: 13.5 volt
Frequency Response: 10Hz 100KHz
THD: 0.003%
S/N Ratio: 130dB
Balanced Input Noise Rejection: 60 dB
Absolute BT1700 Vinyl Electrical Tape is a good quality, multi-purpose vinyl insulating tape. It has great resistance to moisture and varying weather conditions. It is a polyvinyl chloride (PVC) tape that is flame-retardant and conformable. Details
Resists abrasion, moisture, alkalis, solvents, and acids
Flame-retardant and inhibits the corrosion of electrical conductors
Made of durable PVC
Compatible with rubber and synthetic splicing compounds
Withstands a temperature range of 32 to 194 °F (0 to 90 °C)
UL Listed, CSA and VDE Certified
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream BX-23Q Digital Bass Reconstruction Processor w/ 3-Band Bass Equalizer & LED Lighting
$89.99
$189.99
Soundstream BX-23Q Bass Processor Reconstruction with Remote
They say music soothes the soul, but poor system control can kill the harmonics of a beautiful song or road trip. If you want to extend great-sounding music from your source to your amps, get yourself a Soundstream Digital Bass Reconstruction Processor.
The BX digitally maximizes the ultra-low bass on all types of recorded material. The processor detects bass harmonics and digitally recreates the original essentials for live music's incredible punch and impact. You get more bass! This works great for music or factory radios. We forgot that we enjoy bass response in our systems! EDM, Banda, Rock, Jazz… No Problem!
Bass Reconstruction Processor
SWEEP: Select the frequency boosted by the equalizer. This is the “center frequency,” which can be as low as 27Hz or 63Hz. Choosing this frequency depends on your taste in music.
WIDTH: increases or decreases the bandwidth range, or “Q,” boosting frequencies near the “center frequency.” Narrow Q focuses on harmonics immediately surrounding the center frequency. Wide Q unlocks harmonics all around the center frequency.
DASH CONTROL: included with this bass processor. It can be mounted anywhere in the vehicle, but easy adjustment from the driver seat is recommended. The output level of the Bass Equalizer can be controlled.
General Features:
BX-23Q Bass Reconstruction Processor
3-band bass frequency equalizer, 50 Hz, 125 Hz, 315 Hz @ -12 to 12dB
Frequency sweep adjustment at 27-63Hz
12V max 2-channel low-level RCA input
Dash-mountable remote with subwoofer level control and subsonic filter, 35-80Hz
RGB LED tarantula on top
Authorized Internet Dealer
1-year Manufacturer's Warranty
Dash Mount Remote Control
Bass Restoration Lighted Display
Parametric Bass Control
PFM Subsonic Filter
Balanced Inputs
Bass Output Control
PWM High Head Room Power Supply
Output Level: 13.5 volt
Frequency Response: 10Hz 100KHz
THD: 0.003%
S/N Ratio: 130dB
Balanced Input Noise Rejection: 60 dB
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream BXT1.10000D 10000W Monoblock Amplifier Built In BX-10 Bass Enhancer
$249.99
$479.98
Soundstream BXT1-10000D 10,000 Watts Mono Amplifier Built In BX-10 Epicenter Bass Enhancer
Soundstream BXT1.10000D 10000W Monoblock Amplifier Built-In BX-10 Bass Enhancer. Direct Short, Thermal, & Overload Circuits Protect Amplifier. Digital Bass. Quality sound processing is necessary for those who want the most out of their car audio system. Bass Xtreme amplifiers offer similar sound processing options by including the functions of a Bass Reconstruction Processor. Bass Processor boosts lower frequency harmonics that have been compressed or removed from today’s music recordings and are commonly added in-line before subwoofer amplifiers. Dial in the exact sound you want by tuning the frequency to boost, then increase the bandwidth range from that frequency to stimulate the harmonics around it. After slight adjustments, your audio system can sound like audio professionals have tuned it. Unlock and restore the bass from any system with Bass Xtreme Amplifiers.
It works great for music or factory radios that forget we enjoy bass response in our systems! No Problem! EDM, Banda, Rock, Jazz…
General Features:
Digital Bass Reconstruction Processor Built-in
Adds Impact to Music w/ Insufficient Sub Bass
27Hz-63Hz Variable Center/Sweep Frequency
Variable Q/Width to Broaden or Narrow the Bandwidth
2.5V-10V Output Voltage for Optimum Bass Tuning
LED MAX BASS Indicators Warning of Extreme Levels
1-ohm Minimum Impedance Monoblock Operation
Bridge 2 Monoblocks Together for Double Power!
MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
Military Grade SMT PCB Maintains Dynamic Performance
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mV-6V High Level or Low-Level RCA Input & Output
Variable 12dB Low Pass Crossover Blocks High Frequencies
Variable 12dB Subsonic Crossover Protects Subwoofer
1800 Phase Shift to Match Polarity of System Speakers
Dash Mount Gain Control Module Included
Power Handling:
1,400W x 1 at 4-Ohm Mono
2,100W x 1 at 2-Ohm Mono
3,300W x 1 at 1-Ohm Mono
10,000W Max Power
Variable 40-150Hz 12dB Low Pass Crossover
Variable 10-50Hz 12dB Subsonic Crossover
Selectable 180degree Phase Shift
Total Harmonic Distortion: < 0.3%
Frequency Response: 15-500Hz
Signal-to-Noise Ratio: 105dB
Input Sensitivity: 200mV - 6V
Dimensions: 7.50" W x 2.25" H x 19.25" L
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream BXT1.10000D 10000W Monoblock Amplifier Built In BX-10 Bass Enhancer + Amp Kit
$279.99
$479.98
Soundstream BXT1-10000D 10,000 Watts Mono Amplifier Built In BX-10 Epicenter Bass Enhancer + Absolute KIT4 4 gauge Amp Kit
Soundstream BXT1.10000D 10000W Monoblock Amplifier Built-In BX-10 Bass Enhancer. Direct Short, Thermal, & Overload Circuits Protect Amplifier. Digital Bass. Quality sound processing is necessary for those who want the most out of their car audio system. Bass Xtreme amplifiers offer similar sound processing options by including the functions of a Bass Reconstruction Processor. Bass Processor boosts lower frequency harmonics that have been compressed or removed from today’s music recordings and are commonly added in-line before subwoofer amplifiers. Dial in the exact sound you want by tuning the frequency to boost, then increase the bandwidth range from that frequency to stimulate the harmonics around it. After slight adjustments, your audio system can sound like audio professionals have tuned it. Unlock and restore the bass from any system with Bass Xtreme Amplifiers.
It works great for music or factory radios that forget we enjoy bass response in our systems! No Problem! EDM, Banda, Rock, Jazz…
General Features:
Digital Bass Reconstruction Processor Built-in
Adds Impact to Music w/ Insufficient Sub Bass
27Hz-63Hz Variable Center/Sweep Frequency
Variable Q/Width to Broaden or Narrow the Bandwidth
2.5V-10V Output Voltage for Optimum Bass Tuning
LED MAX BASS Indicators Warning of Extreme Levels
1-ohm Minimum Impedance Monoblock Operation
Bridge 2 Monoblocks Together for Double Power!
MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
Military Grade SMT PCB Maintains Dynamic Performance
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mV-6V High Level or Low-Level RCA Input & Output
Variable 12dB Low Pass Crossover Blocks High Frequencies
Variable 12dB Subsonic Crossover Protects Subwoofer
1800 Phase Shift to Match Polarity of System Speakers
Dash Mount Gain Control Module Included
Power Handling:
1,400W x 1 at 4-Ohm Mono
2,100W x 1 at 2-Ohm Mono
3,300W x 1 at 1-Ohm Mono
10,000W Max Power
Variable 40-150Hz 12dB Low Pass Crossover
Variable 10-50Hz 12dB Subsonic Crossover
Selectable 180degree Phase Shift
Total Harmonic Distortion: < 0.3%
Frequency Response: 15-500Hz
Signal-to-Noise Ratio: 105dB
Input Sensitivity: 200mV - 6V
Dimensions: 7.50" W x 2.25" H x 19.25" L
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream BXT1.5000D Built-in Digital Bass Reconstruction Amplifier
$164.99
$309.98
Soundstream BXT1.5000D Built-in Digital Bass Reconstruction Amplifier
Features:
1-OHM MINIMUM IMPEDANCE STABILITY
An amplifier’s impedance stability is its ability to continuously power speaker(s) of no less than the given impedance per channel without the risk of damage. Subwoofers are available in various voice coil configurations and impedances, so be sure yours will be no less than 1 ohm.
ACTIVE 12DB/OCTAVE CROSSOVERS & PHASE SHIFT
Active crossovers built into an amplifier are the most efficient crossovers to use in-car audio systems. Active crossovers protect speakers from damage by harmful frequencies and preserve optimum performance.
LOW-LEVEL RCA INPUT & PRE-AMP OUTPUT
Connect the car stereo's low-level (pre-amp) audio output to the amplifier using good quality twisted pair RCA interconnect cables. The amplifier pre-amp output daisy-chains the audio signal to multiple amplifiers of complex audio systems.
SWEEP Control
selects the frequency boosted by the equalizer. This is the “center frequency,” which can be as low as 27Hz or 63Hz. Choosing this frequency depends on your taste in music.
WIDTH Control
increases or decreases the bandwidth range, or “Q,” boosting frequencies near the “center frequency.” Narrow Q focuses on harmonics immediately surrounding the center frequency. Wide Q unlocks harmonics all around the center frequency.
MAX BASS INDICATOR
lights above the equalizer controls are a visual representation of the boost level. Bright, continuous illumination indicates maximum bass enhancement levels have been reached. Remember, more isn’t necessarily better…
DASH MOUNT CONTROL
Included with this amplifier can be mounted anywhere in the vehicle, but near the driver seat is recommended. The output level of the Bass Equalizer can be controlled, as well as the amp.
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream BXT1.7500D 7500 Watts Mono Amplifier Built In BX-10 Epicenter
$199.99
$399.99
Soundstream BXT1.7500D 7500 Watts Mono Amplifier Built-In BX-10 Epicenter
General Features:
Digital Bass Reconstruction Processor Built-in
Adds Impact to Music w/ Insufficient Sub Bass
27Hz-63Hz Variable Center/Sweep Frequency
Variable Q/Width to Broaden or Narrow the Bandwidth
2.5V-10V Output Voltage for Optimum Bass Tuning
LED MAX BASS Indicators Warning of Extreme Levels
1-ohm Minimum Impedance Monoblock Operation
Bridge 2 Monoblocks Together for Double Power!
MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
Military Grade SMT PCB Maintains Dynamic Performance
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mV-6V High Level or Low-Level RCA Input & Output
Variable 12dB Low Pass Crossover Blocks High Frequencies
Variable 12dB Subsonic Crossover Protects Subwoofer
1800 Phase Shift to Match Polarity of System Speakers
Dash Mount Gain Control Module Included
Specifications:
Power Handling:
1000W x 1 at 4-Ohm Mono
1,500W x 1 at 2-Ohm Mono
2500W x 1 at 1-Ohm Mono
7500W Max Power
Variable 40-150Hz 12dB Low Pass Crossover
Variable 10-50Hz 12dB Subsonic Crossover
Selectable 180degree Phase Shift
Total Harmonic Distortion: < 0.3%
Frequency Response: 15-500Hz
Signal-to-Noise Ratio: 105dB
Input Sensitivity: 200mV - 6V
Dimensions: 7.50" W x 2.25" H x 15.75" L
1-Year Autosoundswarehouse Warranty
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream BXT2.1200 Bass Xtreme Series 2Ch Amplifier
$99.99
$145.98
Soundstream BXT2.1200 Bass Xtreme Series 2Ch Amplifier
Features:
Quality sound processing is necessary for those who want the most out of their car audio system. Bass Xtreme amplifiers offer similar sound processing options by including the functions of a Bass Reconstruction Processor. Bass Processor boosts lower frequency harmonics that have been compressed or removed from today’s music recordings and are commonly added in-line before subwoofer amplifiers. Dial in the exact sound you want by tuning the frequency to boost, then increase the bandwidth range from that frequency to stimulate the harmonics around it. After slight adjustments, your audio system can sound like audio professionals have tuned it. Unlock and restore the bass from any system with Bass Xtreme Amplifiers.
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream BXT4.2000 Bass Xtreme Series 4Ch Amplifier
$99.99
$179.98
Soundstream BXT4.2000 Bass Xtreme Series 4Ch Amplifier
Quality sound processing is necessary for those who want the most out of their car audio system. Bass Xtreme amplifiers offer similar sound processing options by including the functions of a Bass Reconstruction Processor. Bass Processor boosts lower frequency harmonics that have been compressed or removed from today’s music recordings and are commonly added in-line before subwoofer amplifiers. Dial in the exact sound you want by tuning the frequency to boost, then increase the bandwidth range from that frequency to stimulate the harmonics around it. After slight adjustments, your audio system can sound like audio professionals have tuned it. Unlock and restore the bass from any system with Bass Xtreme Amplifiers.
General Features:
Bass Xtreme Series 4-Channel Class A/B Car Amplifier
Selectable 6db or 12db 50hz bass boost
MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
Military Grade SMT PCB Maintains Dynamic Performance
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mV-6V High Level or Low-Level RCA Input & Output
Variable 12dB Low Pass Crossover Blocks High Frequencies 50-250hz
Variable 12dB High Pass Crossover 120-3khz
Max Power: 2000 Watts
RMS Power @ 4Ω: 110W x 4
RMS Power @ 2Ω: 175W x 4
RMS Bridged @ 4Ω: 350W x 2
Remote Gain Control: N/A
Low Pass Filter: N/A (F) / 50Hz-250Hz (R)
High Pass Filter: 120Hz-3KHz (F) / 120Hz-3KHz (R)
Bass Boost: 0-6-12dB (Rear)
Bass Boost Frequency: 50Hz (Rear)
S/N: 105dB
Input Sensitivity: 200Mv-6V
THD: <0.05%
Operation Voltage: 9V-16V DC
Fuse Rating: 40A x 2
Dimensions (7.5″W x 2.25″H): 14.50″ L
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream BXT4.2000 Bass Xtreme Series 4Ch Amplifier + 0 Gauge Amp Kit
$139.99
$279.99
Soundstream BXT4.2000 Bass Xtreme Series 4Ch Amplifier + Absolute KIT0 0 Gauge Amp Kit
Quality sound processing is necessary for those who want the most out of their car audio system. Bass Xtreme amplifiers offer similar sound processing options by including the functions of a Bass Reconstruction Processor. Bass Processor boosts lower frequency harmonics that have been compressed or removed from today’s music recordings and are commonly added in-line before subwoofer amplifiers. Dial in the exact sound you want by tuning the frequency to boost, then increase the bandwidth range from that frequency to stimulate the harmonics around it. After slight adjustments, your audio system can sound like audio professionals have tuned it. Unlock and restore the bass from any system with Bass Xtreme Amplifiers.
General Features:
Bass Xtreme Series 4-Channel Class A/B Car Amplifier
Selectable 6db or 12db 50hz bass boost
MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
Military Grade SMT PCB Maintains Dynamic Performance
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mV-6V High Level or Low-Level RCA Input & Output
Variable 12dB Low Pass Crossover Blocks High Frequencies 50-250hz
Variable 12dB High Pass Crossover 120-3khz
Max Power: 2000 Watts
RMS Power @ 4Ω: 110W x 4
RMS Power @ 2Ω: 175W x 4
RMS Bridged @ 4Ω: 350W x 2
Remote Gain Control: N/A
Low Pass Filter: N/A (F) / 50Hz-250Hz (R)
High Pass Filter: 120Hz-3KHz (F) / 120Hz-3KHz (R)
Bass Boost: 0-6-12dB (Rear)
Bass Boost Frequency: 50Hz (Rear)
S/N: 105dB
Input Sensitivity: 200Mv-6V
THD: <0.05%
Operation Voltage: 9V-16V DC
Fuse Rating: 40A x 2
Dimensions (7.5″W x 2.25″H): 14.50″ L
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Soundstream BXT4.2000 Bass Xtreme Series 4Ch Amplifier + 4 Gauge Amp Kit
$129.99
$259.99
Soundstream BXT4.2000 Bass Xtreme Series 4Ch Amplifier + Absolute KIT4 4 Gauge Amp Kit
Quality sound processing is necessary for those who want the most out of their car audio system. Bass Xtreme amplifiers offer similar sound processing options by including the functions of a Bass Reconstruction Processor. Bass Processor boosts lower frequency harmonics that have been compressed or removed from today’s music recordings and are commonly added in-line before subwoofer amplifiers. Dial in the exact sound you want by tuning the frequency to boost, then increase the bandwidth range from that frequency to stimulate the harmonics around it. After slight adjustments, your audio system can sound like audio professionals have tuned it. Unlock and restore the bass from any system with Bass Xtreme Amplifiers.
General Features:
Bass Xtreme Series 4-Channel Class A/B Car Amplifier
Selectable 6db or 12db 50hz bass boost
MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
Military Grade SMT PCB Maintains Dynamic Performance
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mV-6V High Level or Low-Level RCA Input & Output
Variable 12dB Low Pass Crossover Blocks High Frequencies 50-250hz
Variable 12dB High Pass Crossover 120-3khz
Max Power: 2000 Watts
RMS Power @ 4Ω: 110W x 4
RMS Power @ 2Ω: 175W x 4
RMS Bridged @ 4Ω: 350W x 2
Remote Gain Control: N/A
Low Pass Filter: N/A (F) / 50Hz-250Hz (R)
High Pass Filter: 120Hz-3KHz (F) / 120Hz-3KHz (R)
Bass Boost: 0-6-12dB (Rear)
Bass Boost Frequency: 50Hz (Rear)
S/N: 105dB
Input Sensitivity: 200Mv-6V
THD: <0.05%
Operation Voltage: 9V-16V DC
Fuse Rating: 40A x 2
Dimensions (7.5″W x 2.25″H): 14.50″ L
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.