yorkville (103)

The Yorkville LS1208 "basspipe" subwoofer system. The "basspipe" is a multiple flare horn, connected to an organ-like pipe, slowly flaring to the mouth. The bandwidth is narrowed and optimized to a specific range in the lower registers. Outdoor measurements show very smooth, very high output in the 35Hz to 200Hz range. This is the highest efficiency that we have ever seen for a single 18" driver enclosure, especially with a gross volume of only 22 cubic feet. In addition, a significant gain is achieved when using two units side by side as the mouth nears maximum acoustic load. Additional research has developed a woofer with significantly higher power handling than any other speaker we currently use, making the LS1208 one of the highest output subwoofers available. Performance, packaging, and overall value make the LS1208 a benchmark. Suitable for touring or fixed installations, the cabinets are constructed of 15mm 11-ply Baltic Birch with heavy internal bracing for reduced resonance and better durability. The enclosure is covered in a black carpet covering and incorporates metal corner protectors, rugged curved anti-resonant metal grilles, and 1/4" or Speakon input connectors. An optional finish of black ultrathin paint (LS1208B) is also available. Additionally, the Speakon connectors feature a configuration switch that allows instant reversal of Speakon jack pinouts for easy single wire hook-up using optional four wire Speakon cables. The LS1208 includes tilt-back wheels and top/rear mounted corner handles for better maneuverability and stacking. Product Specification: System Type: Horn Loaded Subwoofer Active or Passive: Passive Power Rating (Watts): 2000 Watts (4000 Peak / 1000 Continuous) Nominal Impedance (Ohms): 8 Sensitivity (dB @1Watt/1m): 105 Max SPL (dB): 139dB Peak (136dB Continuous) Frequency Response (Hz +/- 3dB): 35 - 200 Driver Configuration: 18-inch Ceramic Magnet w/4-inch Voicecoil Inputs - 1/4" Jacks: 2 Inputs - Speakon 4-pin: 2 Other Controls / Features: Speakon connectors feature a configuration switch that allows instant reversal of Speakon jack pinouts for easy single wire hook-up using optional four wire Speakon cables. Corners: Black Steel Wheels: 2 Rear Bar Handles: 2 Top, 2 Side Enclosure Materials: 15mm (5/8inch) 11-ply Russian Birch Grille: Heavy gauge perforated metal Covering / Finish: Black Ozite (Carpet) Optional Covering / Finishes: Black Ultrathane Paint (LS1208B) Dimensions (DWH xbackW, inches): 33 x 28 x 43.5 Dimensions (DWH xbackW, cm): 83.8 x 71 x 110.5 Weight (lbs/kg): 181.7 / 82.4

2x800w, 10 inputs DJ Mixer/Amp The convenience, lighter weight and small 'footprint' of a box mixer with the tilt-back visibility and channel control access of a desk mixer makes these new 'wedge' mixers an ideal high power, high quality powered mixer solutions. High-powered high-efficiency class-H power amplifiers, newly designed input strips, on-board DSP, a new, more effective master EQ section and ten very useful and usable input channels complete the new 'wedge' mixer packages. The 1600-watt M1610-2 has two integrated 800-watt power amplifiers that can be assigned as stereo mains, or mono main and mono monitor. Each amplifier is attached to an innovative master EQ section designed specifically for these new mixers. The master EQ has a 9-band graphic EQ with additional high and low shelving EQ's at either end of the frequency band. The nine graphic sliders are essentially all of the middle bands of a 15-band graphic EQ with the low and high frequency bands covered by separate shelving controls. This gives the user more control over the feedback-prone mid frequency bands; with high and low tone-shaping frequencies controlled by additional simple +/- 15 dB trim controls. The M1610 has 10 input channels. The first six channels have balanced XLR microphone and TRS balanced inputs, input trim control, three-band EQ, master volume and trim set light. The mono line inputs on channels 5 and 6 are pre-EQ'd for Hi-Z instrument level input, making them an ideal place to start when looking for that perfect live acoustic guitar or direct bass sound. When the input trim level is properly set, users will have ample overall gain while taking full advantage of the new clip elimination circuit which makes it virtually impossible to distort the input of the microphone and instrument channels.   Product Specifications: Number of Channels: 10 Mono Channel EQ: Low, Mid, High Stereo Channel EQ: Low, Mid, High Channel Effects: All Channels Monitors Effects: Yes Balance Controls: Ch. 7 - 10 Pan Controls: Ch. 1 - 6 Channel Overload Protection: Ch. 1 - 6 Inputs - XLR (bal): 8 Inputs - 1/4": 10 Inputs - RCA (unbal): 1 Pair Mute Switches: Global 1 - 8 Activity / Solo LED: Trim Set Ch. 1 - 6 Clip / Mute LED: All Channels Phantom Power: 48V + LED Indicator Internal Effects: 24 Bit stereo, 16 Effects with Parameter Pot Dimensions (DWH, inches): 11.1 x 18.6 x 11 Dimensions (DWH, cm): 28 x 47 x 28 Weight (lbs/kg): 31.3 / 14.2

The Yorkville 8-Channel Compact Mixer delivers all of the essential features needed in a professional mixer in a convenient, ultra-compact package. High quality 60mm faders throughout, effective fully featured input channel design, 24-bit digital effects, and break switch make the PGM8 the perfect mixer for live music applications and for small installs. Product Specifications: Number of Channels: 8 Mono Channel EQ: 3-band Balance Controls: Yes Pan Controls: Yes Channel Overload Protection: Yes Inputs - XLR (bal): 6 Inputs - 1/4": 6 Inputs - RCA (unbal): 1 stereo pair Phantom Power: 48 volt + LED indicator VU Meter: 2 x 10 Segment LEDs Headphone Monitor Features: yes Internal Effects: 24 bit stereo 16 effects Effects Send: 2 (1 internal, 1 external) Effects Return to Main: Yes Effects Return to Monitor: Yes Reverb / Effects Footswitch: Yes Record Outputs : 1 stereo pair Mixer - Signal to Noise Ratio (dB): Greater Than -100dB Mixer - Freq Resp (Tone and EQ Flat,±2dB): 20Hz - 20KHz Mixer THD (Main out w/ -10dB input): Less Than 0.05% Typical crosstalk -1 kHz : Greater Than -60dB CMRR @ 60Hz (min/typ): 55dB/65dB Power Consumption (typ/max): 26VA (typical) Chassis Construction: Steel Dimensions (DWH, inches): 14.2 x 12.8 x 2.8 Dimensions (DWH, cm): 36 x 32.5 x 7 Weight (lbs/kg): 8.5/3.8

The Yorkville PSA1FRAME bumper has several flying points to angle the array in simple two-point hangs. The efficient design allows the PSA1 cabinets to be rigged with the frame kit in the field with a minimum of time and effort. The hardware maintains fixed cabinet to cabinet splay angles for seamless vertical coverage. Product Specification:   Materials: Steel Frame, Aluminum mounting brackets Finish: Powder-coated black

The Yorkville PSA1RIGKIT is a rigging kit for the PSA1 Paraline Series active full range loudspeaker system. It allows you to fly two PSA1 cabinets in a vertical array, and can be used with up to four cabinets for specialized installations. The kit includes two side rails, two mounting brackets, and all the necessary hardware. The side rails are made of steel and are powder-coated black for durability. The mounting brackets are made of aluminum and have integrated safety catches. Product Specification:   Materials: Steel side rails, Aluminum mounting brackets Finish: Powder-coated black

The Yorkville SABUMPER1, flying bumber for multi box clusted hang is a 4 wide column flying bumper which can safely handle two SA153 and one SA315S cabinets in each column for a 12 cabinet max hang at a safety factor of 7:1. Speaker cabinets are easily connected to the flying bumper using the same SALOCKBAR used for connecting cabinets to each other, no additional rigging accessories are required. Included with the SABUMPER1 are two extension tilt bars that can be used when extreme up tilt or down tilt are required. The extension bars are simply slid into the two central or the two outer main rails and secured in place with a 5/8" shackle (not included). Product Specification:   Max Load Capacity: 2000lbs/907kg at 7:1 Safety Ratio Max Cabinet Capacity: 4 column Wide Hang (Each Column = 2 x SA153 + 1 x SA315S Max. Total Cabinet hang = 12) Material / Construction: 10 Gauge Welded Tube Steel Finish: Black Powder Coat Included Accessories: Two Extension Tilt Bars Required Shackle Size (Not Included): 5/8" (Sample Crosby#1018473) Overall Dimension DxWxH: 26" x 59.5" x 4" Weight: 64lbs with the extension bars, 55lbs without extension tilt bars

The Yorkville SACABLELOOP  powerCON TRUE1 is a locking 16 A true mains connector. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON TRUE1 is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live. Product Specification:   Length: 6 feet Connector: Powercon Cable Gauge: 12 AWG Current Rating: 20 amps Voltage Rating: 125/250 VAC

The Yorkville Sound AP4K 2x 1800w per channel Amplifier capable of delivering 1800 watts per channel into either a 2 or 4 ohm load, Yorkville Sound's new AudioPro AP4K uses proven Class-H technology and advanced protection circuitry to provide unmatched long term reliability in the field. Product Specification:   Amplifier class: Class-H Continuous Average Power @ 8 Ohms BCD (Watts): 600 (x2)(2ohm mode)/1000 (x2)(4ohm mode) Continuous Average Power @ 4 Ohms BCD (Watts): 1000 (x2)(2ohm mode)/1800 (x2)(4ohm mode) Continuous Average Power @ 2 Ohms BCD (Watts): 1800 (x2) (2ohm mode)/ NA in 4ohm mode Continuous Average Power Bridged BCD (Watts): 3600 @ 4 ohms /3600 @ 8 ohms Burst Average Power @ 8 Ohms BCD(Watts): 1000 (x2)(2ohm mode)/1800 (x2)(4ohm mode) Burst Average Power @ 4 Ohms BCD (Watts): 1800 (x2)(2ohm mode)/3500 (x2)(4ohm mode) Burst Average Power @ 2 Ohms BCD (Watts): 2500 (x2)(2ohm mode)/ NA Burst Average Power Bridged BCD (Watts): 5000 @ 4 ohms / 7000 @ 8 ohms Frequency Response (Hz, +/- 1dB): 20-20,000 Hum and Noise (un / Aweighted -dB) -100/ -115 THD -1kHz- 4 OHMS: 0.01 THD - 20Hz-20kHz, 4 Ohms: less than 0.1% Slew Rate (V/uS): 25 Slew Rate Bridged (V/uS): 50 Damping Factor (30 Hz - 400 Hz @ 8 Ohms): 600 Crosstalk (1kHz / 20Hz-20kHz): -75 / -60 dB Input Impedance - Bal/Unbal (Ohms) 10,000/5,000 Input Sensitivity (Vrms) For Full Power Out: 1.0V (2ohm mode) / 1.4V(4ohm mode) Max Voltage Gain (dB): 36 CMRR @ 60Hz (min/typ): 48/56 dB Stereo / Bridge (S/B): S/B Protection: DC, Load, Thermal Limiter: Peak High Pass Filter: 50Hz, 18dB Octave Cooling: Internal Fans Cooling Path: Front to Rear Inputs – XLR: 2 Inputs - 1/4" Jacks: 4 Outputs - Speakon 4-pin: 2 Outputs - Binding Post: 2 Power Consumption (typ/max): 1130/1800 Watts Rack Spaces: 2 Transformer Type: Toroidal Exterior Finish: Baked, Black Painted Dimensions (DWH /D fm ears, inches): 16.5 x 17.3 x 3.5 x 14.9 Dimensions (DWH /D fm ears, cm): 41.5 x 43.9 x 8.9 x 37.85 Weight (lbs / kg): 41 / 18.5

The Yorkville Sound ES12P 12" Elite Series Powered Subwoofer is a compact, high-output rear-horn loaded sub for clubs, bands, bars, and mobile DJs. The ES12P is designed to add powerful bass to any setup including the Yorkville EF10P full-range cabinet. The built-in 1200W (2400W Peak) power amplifier powers the 12" woofer and offers a frequency response of 48 to 150 Hz with a maximum SPL of 135 dB. Product Specification Specification Value System Type Two-way Active or Passive Passive Power Rating (Watts) 150 Nominal Impedance (Ohms) 8 or 70/100 Volt Sensitivity (dB @1Watt/1m) 96 Max SPL (dB) 124 Frequency Response (Hz +/- 3dB) 80 - 18k Dispersion (°H x °V) 100 x 100 Crossover Frequency (Hz) 2.5kHz Passive Driver Configuration 8 inch, 1 inch Inputs Screw Terminal Outputs Screw Terminal Controls 37.5w / 75w / 150w / off / 8 Ohm Included Hardware Yoke Bracket Enclosure Materials Injection Molded Plastic Baffle Material Injection Molded Plastic Grille Metal Dimensions (DWH xbackW, inches) 13.7 x 11.87 x 11.88 Dimensions (DWH xbackW, cm) 34.8 x 30 x 30.2 Weight (lbs/kg) 24.25 / 11

The Yorkville Sound Coliseum C120/70 is a high-end, water-resistant speaker featuring specially isolated drivers and a sculpted ABS plastic enclosure. It features an integrated 70V 'matching transformer' for use in 70V systems. A rotary tap switchs offers settings for 10W, 20W, 30W or bypass settings. This compact speaker is ideally suited for many applications: commercial installations, home theater, home stereo, mobile applications, reference monitor, personal stage monitor and can even be used outdoors. The C120/70 is a bass reflex enclosure with a tuned port and a 5" woofer, which provides improved bass performance over conventional 5" woofer enclosures. Removing the press-fit grille gives access to the eyeball tweeter, which can be swiveled to suit various listening positions. The C120/70 will handle 100 Watts of continuous music and is accurate from 75Hz to over 19kH Product Specification:   System Type: 2-way Active or Passive: Passive Power Rating (Watts): 100 Nominal Impedance (Ohms): 8 Sensitivity (dB @1Watt/1m): 94 Max SPL (dB): 104 Frequency Response (Hz +/- 3dB): 75 - 19,000 Driver Configuration: Tweeter, 5 inch HF Driver(s): Aimable Mylar Tweeter HF Dispersion (°H x °V): 90 x 90 LF Driver(s): 5 inch Inputs: 3 Inputs - 1/4" Jacks: 2 Inputs - Screw Terminal: 1 (Push Terminal) Flying Hardware: U-Bracket, 2 Rear Key Hole Mounts, Mic Stand Mount Enclosure Materials: Injection Molded, ABS Plastic Port(s): 1 Grille: Perforated Steel Covering / Finish: Low Reflective Black (C120) Optional Covering / Finishes: Low Reflective White (C120W) Dimensions (DWH xbackW, inches): 6.5 x 6.75 x 10.25 x 6 Dimensions (DWH xbackW, cm): 16.5 x 17 x 26 x 16 Weight (lbs/kg): 4.7 / 2.1

The Yorkville Sound Coliseum C120W is a high-end, water resistant speaker featuring specially treated drivers and a sculpted ABS plastic enclosure. This compact speaker is ideally suited for many applications: commercial installations, home theatre, home stereo, mobile applications, reference monitor, personal stage monitor and can even be used outdoors. Product Specification:   System Type: 2-way Active or Passive: Passive Power Rating (Watts): 100 Nominal Impedance (Ohms): 8 Sensitivity (dB @1Watt/1m): 94 Max SPL (dB): 104 Frequency Response (Hz +/- 3dB): 75 - 19,000 Driver Configuration: Tweeter, 5 inch HF Driver(s): Aimable Mylar Tweeter HF Dispersion (°H x °V): 90 x 90 LF Driver(s): 5 inch Inputs: 3 Inputs - 1/4" Jacks: 2 Inputs - Screw Terminal: 1 (Push Terminal) Flying Hardware: U-Bracket, 2 Rear Key Hole Mounts, Mic Stand Mount Enclosure Materials: Injection Molded, ABS Plastic Port(s): 1 Grille: Perforated Steel Covering / Finish: Low Reflective Black (C120) Optional Covering / Finishes: Low Reflective White (C120W) Dimensions (DWH xbackW, inches): 6.5 x 6.75 x 10.25 x 6 Dimensions (DWH xbackW, cm): 16.5 x 17 x 26 x 16 Weight (lbs/kg): 4.7 / 2.1

The Yorkville Sound C12CW two-way 12" full-range loudspeaker is designed to deliver high output from a compact, highly weather-resistant enclosure. The C12CW be operated at 8Ω or on 70V/100V distributed lines and is rated at 300 watts with a maximum 129 dB SPL output. Its horn-loaded coaxial design produces powerful full-range audio with precise time alignment for high intelligibility. Product Specification Specification Value System Type Two-way Active or Passive Passive Power Rating (Watts) 300 Nominal Impedance (Ohms) 8 or 70/100 Volt Sensitivity (dB @1Watt/1m) 98 Max SPL (dB) 129 Frequency Response (Hz +/- 3dB) 55 - 18k Dispersion (°H x °V) 80 x 80 Crossover Frequency (Hz) 2.2 kHz Passive Driver Configuration 12 inch, 1 inch Inputs Screw Terminal Outputs Screw Terminal Controls 50w / 100w / 200w / off / 8 Ohm Included Hardware Yoke Bracket Enclosure Materials Injection Molded Plastic Baffle Material Injection Molded Plastic Grille Metal Dimensions (DWH xbackW, inches) 17 x 16 x 11.88 x 16.2 Dimensions (DWH xbackW, cm) 44.3 x 40.7 x 41.1 Weight (lbs/kg) 43.65 / 19.8

Yorkville Sound C12W, Coliseum 400 Watt 12-Inch Install Speaker 80x50 Rotatable Horn - White Coliseum 12" Installation Loudspeaker Coliseum loudspeakers are designed for installation in home, retail, restaurant, office, school, and house of worship spaces. Whether you need discrete in-ceiling speakers, a horn for outdoor paging, or a flown array of powered cabinets, Coliseum combines high-fidelity audio with clean, minimalist aesthetics that blend naturally into any environment. With 400 watts of power handling, a 12” woofer, rotatable horn, and OmniMount-compatible rigging points, the C12W is ideal for larger commercial or worship applications. The optional FH2W hardware kit offers even more mounting flexibility for the C12W and C15W. It allows single-point hangs for solo cabinets or two-box arrays, with a staggered hole pattern for multiple tilt angles. If additional tilt-down is required, simply attach an eyebolt in the pullback position of the cabinet in addition to the hang point. When mounting two loudspeakers, the FH2W splays them at optimum angles to minimize interference. Product Specification:   System Type: Two Way Active or Passive: Passive Power Rating (Watts): 400 Biampable: No Nominal Impedance (Ohms): 8 Sensitivity (dB @1Watt/1m): 98 Max SPL (dB): 124 Frequency Response (Hz +/- 3dB): 55 - 20k Crossover Frequency (Hz): 1100 Driver Configuration: 12 inch / 1 inch HF Driver(s): 1 inch HF Horn: Rotatable ABS Waveguide HF Dispersion (°H x °V): 80 x 50 Rotatable HF Protection: CTL Inputs - Speakon 4-pin: 2 Inputs - Screw Terminal: 1 Pair Flying Hardware: 1/4 inch Optional Flying Hardware: FH2W Flyware bracket is available Pole Mount Adapter (1 3/8"-3.5cm): No Enclosure Materials: 15mm (5/8inch) 11-ply Russian birch Grille: Perforated Metal Covering / Finish: Two Part White Epoxy Other Details: Has rear-mount rigging points for Omnimount 60.0WA Bracket Dimensions (DWH xbackW, inches): 14.3 x 16.2 x 24.1 x 11.1 Dimensions (DWH xbackW, cm): 36.3 x 41.1 x 61.2 x 28.2 Weight (lbs/kg): 54 / 24.6 Specifications System Type: 2-WayActive or Passive: PassivePower Rating: 400 W Nominal Impedance (Ohms): 8ΩSensitivity (dB AT 1Watt/1m): 98 dBMax SPL : 124 dBFrequency Response (Hz +/- 3dB): 55 Hz - 20 kHzDispersion (H x V): 80° x 50° RotatableCrossover Frequency: 1.1 kHzDriver Configuration :1x 12" LF Driver, 1x 1" HF Driver with Rotatable ABS WaveguideHF Protection : CTLInputs: 2x speakON® 4-Pin, Screw TerminalsFlying Hardware: 1/4"Optional Flying Hardware: FH2W Flyware BracketPole Mount Adapter (1 3/8  No Enclosure Materials 15 mm (5/8") 11-ply Baltic BirchGrille: Perforated MetalCovering / Finish: Two-Part White EpoxyOther Details : Rear-Mount Rigging Points for Omnimount BracketDimensions (DWH): 14.3" x 16.2" x 24.1" (36.3 cm x 41.1 cm x 61.2 cm)Weight: 54 lbs / 24.6 cm  Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Yorkville Sound C15W, Coliseum Series 500W 2-Way Installation Speaker 15 Inch - White Coliseum 15" Installation Loudspeakers Coliseum loudspeakers are designed for installation in home, retail, restaurant, office, school, and house of worship spaces. Whether you need discrete in-ceiling speakers, a horn for outdoor paging, or a flown array of powered cabinets, Coliseum combines high-fidelity audio with clean, minimalist aesthetics that blend naturally into any environment. The C15W is the most powerful loudspeaker in the Coliseum series. With 500 watts of power handling, a 15” woofer, rotatable horn, and OmniMount-compatible rigging points, the C15W is ideal for large commercial or worship applications. The optional FH2W hardware kit offers even more mounting flexibility for the C15W and C12W. It allows single-point hangs for solo cabinets or two-box arrays, with a staggered hole pattern for multiple tilt angles. If additional tilt-down is required, simply attach an eyebolt in the pullback position of the cabinet in addition to the hang point. When mounting two loudspeakers, the FH2W splays them at optimum angles to minimize interference   Product Specification:   System Type: Two Way Active or Passive: Passive Power Rating (Watts): 500 Biampable: No Nominal Impedance (Ohms): 8 Sensitivity (dB @1Watt/1m): 99 Max SPL (dB): 126 Frequency Response (Hz +/- 3dB): 50 - 20k Crossover Frequency (Hz): 1100 Driver Configuration: 15 inch / 1 inch HF Driver(s): 1 inch HF Horn: Rotatable ABS Waveguide HF Dispersion (°H x °V): 0 x 50 Rotatable HF Protection: CTL Inputs - Speakon 4-pin: 2 Inputs - Screw Terminal: 1 Pair Flying Hardware: 1/4 inch Optional Flying Hardware: FH2W Flyware is available Pole Mount Adapter (1 3/8"-3.5cm): No Enclosure Materials: 15mm (5/8inch) 11-ply Russian birch Grille: Perforated Metal Covering / Finish: Two Part White Epoxy Other Details: Has rear mounted rigging points for Omnimount 120.0WA bracket Dimensions (DWH xbackW, inches): 15.4 x 20.9 x 28.7 x 15.7 Dimensions (DWH xbackW, cm): 39.1 x 53.1 x 72.9 x 39.8 Weight (lbs/kg): 75 / 34.2 Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

The Yorkville Sound C160W is a Pot Light Ceiling Speaker that's ideal for any paging or background music system. It's a 4" diameter, 10 Watt flush-mount ceiling speaker that's designed specifically for quick, simple installation in office and retail environments. It has an onboard 70-Volt transformer and taps, operating at 2.5, 5, or 10 watts. It also features sensitivity of 92 dB (1 W/m) and 100 Hz - 16kHz frequency response. Its rugged ABS plastic construction in a 'pot light' format with an all-metal grille makes the C160W great for any drywall or tile drop-ceiling mount application. It can be easily installed and driven by any 70-volt amplification system, including the Coliseum CA1 or CA1T (sold separately). Product Specification:   System Type: Pot Light Speaker Active or Passive: Passive Power Rating (Watts): 10 Nominal Impedance (Ohms): 8 / 70 Volt Transformer Sensitivity (dB @1Watt/1m): 91 Frequency Response (Hz +/- 3dB): 150 - 20k Driver Configuration: Single 4 Inch HF Dispersion (°H x °V): 90 x 90 Inputs - Screw Terminal: Solder lugs Enclosure Materials: ABS Plastic Grille: Metal Dimensions (DWH xbackW, inches): 5.5 x 4.8 Dimensions (DWH xbackW, cm): 14.2 x 12 Weight (lbs/kg): 3 / 1.4