Crux (293)

Crux RFM-GM29 Multi-View Integration Interface for GM LAN 29-Bit Vehicles The Crux RFM-GM29 is a Multi-View Integration Interface with six camera video inputs. The system seamlessly integrates with the factory-installed system for adding Front, Rear, 2 Sides, and wireless cameras. General Features: Adds a reverse camera input plus six more video inputs. It uses the factory steering wheel control buttons to view the video sources. Turn signals automatically trigger the corresponding side camera. The turn signal camera trigger can be turned on or off using the SRCE button on the SWC. Ability to toggle from back-up camera to cargo camera and trailer camera while in reverse gear NOTE:If your vehicle is not equipped with a factory backup camera, you must have the radio code at the dealership for a backup camera. Compatibility: BUICK 2008-2015 Enclave 2006-2011 Lucerne CADILLAC 2006-2009 DTS 2007-2014 Escalade 2007-2009 SRX CHEVROLET 2007-2013 Avalanche 2007-2008 Equinox 2008-2013 Express Van 2006-2013 Impala / Impala SS 2006-2007 Monte Carlo 2007-2013 Silverado 1500-3500 Pickup 2007-2014 Suburban 2007-2014 Tahoe 2009-2015 Traverse GMC 2007-2015 Acadia 2008-2013 Savana 2007-2013 Sierra 1500-3500 Pickup 2007-2014 Yukon HUMMER 2008-2009 H2 PONTIAC 2007-2009 Torrent SATURN 2007-2010 Outlook 2008-2009 Vue SUZUKI 2007-2008 XL7 Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Crux RFM-MB1 Multi View Integration Interface for Mercedes Benz Sprinter with MBUX Navigation System RFM-MB1 is a Multi View Integration Interface for Mercedes Benz Sprinter with MBUX Navigation System. It integrates with the factory-installed system for adding Front, Rear, 2 Side, and wireless cameras. This unit uses steering wheel control buttons to toggle between video sources General Features: – Adds front, right, left and rear camera inputs.– Uses the steering wheel control buttons to toggle between the camera sources.– Turn signals automatically trigger the corresponding side camera.– With OEM type interactive parking guide lines with calibration function.– On Screen Display set up.Notes:Compatible with 7” or 10.25” MBUX Systems with Navigation. Compatibility: 2019 – 2020 Sprinter with MBUX SystemNAVIGATION / RADIO COMPATIBILITY7” or 10.25” MBUX Systems with Navigation. ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux RFM-MB2 Multi View Integration Interface for Mercedes Benz Sprinter with MBUX System RFM-MB2  Multi View Integration Interface for Mercedes Benz Sprinter with MBUX System ( NON-Navigation System). It integrates with the factory-installed system for adding Front, Rear, and left and right cameras. This unit uses the steering wheel control buttons to toggle between video sources. General Features: Adds front, right, left and rear camera inputs.– Uses the steering wheel control buttons to toggle between the camera sources.– Turn signals automatically trigger the corresponding side camera.– With OEM type interactive parking guide lines with calibration function.– On Screen Display set up.Notes:7” MBUX Systems without Navigation. Compatibility: 2019 – 2020 Sprinter with MBUX SystemNAVIGATION / RADIO COMPATIBILITY7” MBUX Systems without Navigation ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux RFM-RAM1 Multi-View Integration Interface with A/V Input & Side Cameras for Ram Trucks with Uconnect 8.4” Systems The CRUX RFM-RAM1 is a Multi-Video integration Solution with A/V Input for Select Dodge, Jeep & Ram Vehicles with Uconnect 8.4” Systems. It seamlessly integrates with the factory-installed system for adding Front, Rear, 2 Side, and wireless cameras. This unit provides 6 video inputs and 1 A/V Input General Features: Adds a reverse camera input, six videos, plus one audio/video input.Uses the steering wheel control buttons to toggle between the sources.Turn signals automatically trigger the corresponding side camera.The turn signal camera trigger can be turned on or off by using the BACK button on the radio.Includes two adjustable angle cameras for the side mirrors.Has Video In Motion capabilityNOTES:Compatible with UCONNECT 8.4″ SystemsNot compatible with heated seats and heated steering wheel Compatibility: RAM2013 – 2017 15002013 – 2017 25002013 – 2017 3500Note:Heated Seats and Steering Wheels will not work ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Crux RFM-TUN Multi View Integration Interface with A/V Input and Side Mirror Mounted Cameras for Toyota Tundra The CRUX RFM-TUN is a Multi View Integration Interface with A/V Input and Side Mirror Mounted Cameras for Toyota Tundra trucks. It seamlessly integrates with the factory installed system for adding Front, Rear, 2 Side, and wireless cameras. This unit provides 6 video inputs and 1 Audio/Vindeo Input General Features: – Adds a reverse camera input, 6 video plus 1 audio/video inputs.– Uses the steering wheel controls buttons to toggle between the sources.– Turn signals automatically trigger the corresponding side camera.– Turn signal camera trigger can be turned on or off by using the SWC button. Compatibility: Toyota2016 – 2018 Tundra (3rd Generation) ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux RFM-TYH Multi View Integration Interface with A/V Input and Side Mirror Mounted Cameras For Toyota Highlander The CRUX RFM-TYH is a Multi View Integration Interface with A/V Input & Side Mirror-Mounted Cameras for 2017-2018 Toyota Highlander Vehicles. It seamlessly integrates with the factory installed system for adding Front, Rear, 2 Side, and wireless cameras. This unit provides 6 video inputs and 1 A/V Input General Features: Adds a reverse camera input, 6 video plus 1 audio/video inputs.Uses the steering wheel controls buttons to toggle between the sources.Turn signals automatically trigger the corresponding side camera.Turn signal camera trigger can be turned on or off by using the by using the SWC button.Includes 2 adjustable angle cameras for the side mirrors.Has Video In Motion capability Compatibility: Toyota 2017 – 2018 HighlanderNAVIGATION / RADIO COMPATIBILITYEntune Radio System ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux RFM-TYS Multi View Integration Interface with A/V Input & Side Mirror-Mounted Cameras for Toyota Sienna Trucks The CRUX RFM-TYS is a Multi View Integration Interface with A/V Input & Side Mirror-Mounted Cameras for 2018 Toyota Sienna Vehicles. It seamlessly integrates with the factory installed system for adding Front, Rear, 2 Side, and wireless cameras. This unit provides 6 video inputs and 1 A/V Input General Features: Adds a reverse camera input, 6 video plus 1 audio/video inputs.Uses the steering wheel controls buttons to toggle between the sources.Turn signals automatically trigger the corresponding side camera.Turn signal camera trigger can be turned on or off by using the by using the SWC button.Includes 2 adjustable angle cameras for the side mirrors.Has Video In Motion capability Compatibility: Toyota2018 SiennaNAVIGATION / RADIO COMPATIBILITYEntune Radio System ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux RFM-TYT Multi View Integration Interface with A/V Input & Side Mirror-Mounted Cameras for Toyota Tacoma Trucks The CRUX RFM-TYT is a Multi View Integration Interface with A/V Input & Side Mirror-Mounted Cameras for Toyota Tacoma Trucks. It seamlessly integrates with the factory installed system for adding Front, Rear, 2 Side, and wireless cameras. This unit provides 6 video inputs and 1 A/V Input General Features: Adds a reverse camera input, 6 video plus 1 audio/video inputs.Uses the steering wheel controls buttons to toggle between the sources.Turn signals automatically triggers the corresponding side camera.Turn signal camera trigger can be turned on or off by using the by using the SWC button.Includes 2 adjustable angle cameras for the side mirrors.Has Video In Motion capability Compatibility: Toyota 2016 – 2018 Tacoma (3rd Generation)NAVIGATION / RADIO COMPATIBILITYWith Entune Radio Systems ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux RFM-UC1 Multi View Integration Interface with A/V Input for Dodge, Jeep & Ram Vehicles with Uconnect 8.4” Systems The CRUX RFM-UC1 is a Multi-Video integration Solution with A/V Input for Select DODGE, JEEP & RAM Vehicles with Uconnect 8.4” Systems It seamlessly integrates with the factory installed system for adding Front, Rear, 2 Side, and wireless cameras. This unit provides 6 video inputs and 1 A/V Input General Features: Adds a reverse camera input, 6 video plus 1 audio/video inputs.Uses the steering wheel controls buttons to toggle between the sources.Turn signals automatically trigger the corresponding side camera.Turn signal camera trigger can be turned on or off by using the BACK button on the radio.NOTES:Compatible with UCONNECT 8.4″ Systems Compatibility: DODGE2015 – 2017 Charger2015 – 2016 Challenger2014 – 2017 DurangoJEEP2014 – 2017 Grand CherokeeRAM2013 – 2017 15002013 – 2017 25002013 – 2017 3500NAVIGATION / RADIO COMPATIBILITYWith Uconnect 8.4” SystemsNOT compatible with 2018 Panasonic screens with CarPlay function.Heated Seats and Steering Wheels will not work.If you have a Dodge Ram Laremie with 2 camera system (the rear view camera goes to the rear view mirror & the cargo camera goes to the radio). Please contact technical support 818-609-9299 for further clarification.   ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux RFM-UC1-AM Multi-View Camera Integration for Aftermarket Radios in Dodge, Jeep & Ram Vehicles with Uconnect Systems RFM-UC1-AM, which is a Multi-View Camera Integration Interface for Aftermarket Radios. It’s a radio replacement interface with SWC and factory 3.5mm Aux port retention, a reverse camera, plus 6 video input interface for the Uconnect system. No camera is included in this kit, but optional cameras are listed on the manual. General Features: – Retains factory features in select Dodge, Jeep, and RAM vehicles while functioning with an aftermarket radio.– Retains Steering Wheel Controls via built-in, pre-programmed interface.– Retains factory 3.5mm Aux Port.– Adds a reverse camera plus 6 video inputs.– Uses the steering wheel controls buttons to toggle between the sources.– Turn signals automatically trigger the corresponding side camera.– Turn signal camera trigger can be turned on or off by using the BACK button on the radio.Optional add on cameras are available to complete the multi-view capability of the RFM-UC1-AM. Cameras available and sold separately include:CDR-31C RAM Cargo Camera, CDR-02 RAM Tailgate Handle Camera, CUB-15 Adjustable Angle Side Camera, CCH-01G Jeep Grand Cherokee Backup Camera, CUL-16 Universal Lip Mount Backup Camera, CFF-01 Bullet Type Front Camera, CFF-02 Square Body Front Camera, & CFF-03 Grille Mount Front CameraNOTES:Compatible with 8.4”, 5” and 4.3” Uconnect Systems* Compatibility: DODGE2014 – 2015 Dart2014 – 2015 DurangoJEEP2014 – 2016 Cherokee2014 – 2016 Grand CherokeeRAM2013 – 2017 15002013 – 2017 25002013 – 2017 3500NAVIGATION / RADIO COMPATIBILITYCompatible with 8.4”, 5” and 4.3” Uconnect Systems*Heated Seats and Steering Wheels will not work.If you have a Dodge Ram Laremie with 2 camera system (the rear view camera goes to the rear view mirror & the cargo camera goes to the radio). Please contact technical support 818-609-9299 for further clarification. ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux RFM-WR1 Multi View Integration Interface with A/V Input for Jeep Wrangler with MyGig Radio The CRUX RFM-WR1 Multi-View Integration Interface with A/V Input for Jeep Wrangler with MyGig Radios. It enables the activation of Video features in MYGIG Radios and also provides an additional Audio/Video input. It seamlessly integrates with the factory installed system for adding Front, Rear, 2 Side, and wireless cameras. This unit provides 6 video inputs and 1 A/V Input & 1 A/V output. This unit has VIM capability and customers can use turn signals to automatically trigger the corresponding side camera. Turn signal camera trigger can be turned on or off by using the SWC button. General Features: – Adds a reverse camera input, 6 video plus 1 audio/video inputs.– Uses the steering wheel controls buttons to toggle between the sources.– Turn signals automatically trigger the corresponding side camera.– Turn signal camera trigger can be turned on or off by using the SWC button.– Has Video In Motion capability Compatibility: JEEP2007 – 2018 Wrangler ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·