Car Tweeters (116)

Cerwin-Vega XED1T 500W Peak (250W RMS) 1” XED Series Metal Dome Tweeters General Features: 1" XED Series Car Tweeters Power Handling: Peak: 500 watts Piezo dome tweeter 4 ohms impedance Sensitivity: 97dB Frequency response: 3500 - 20000 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-S10TW 240W S-Series 1" Silk Dome Tweeter Set The S-S10TW Tweeter’s compact size and wide frequency range are an efficient and affordable upgrade to any factory or aftermarket sound system. The S-S10TW Tweeter’s motor structure was designed to reduce distortion and increase output at high volumes, so you can turn your music up and still experience crystal clear sound. Brighten up your sound stage without sounding overpowering or compromising sound quality. The silk dome design minimizes harsh highs and produces a warm and mellow tone.  General Features: 1-Inch Dome Tweeter Peak Power Handling: 240 Watts RMS Power Handling: 80 Watts Impedance: 6 ohms Sensitivity: 88dB SPL (1W @1m) Frequency Response: 1k Hz to 22kHz Mounting Depth: 3/4" (1.8cm) Cutout Diameter: 2" (5.1cm) circle Recommended Amplification: up to 80 watts RMS per channel Authorized Internet Dealer 1-year Manufactures Warranty What's in the S-S10TW package: S-S10TW owner's manual 2 Tweeters 2 Flush mount housings Two 38" Wires with in-line crossovers 2 Flush mount retention rings  2 Stealth brackets  2 Alpine logo badges  Warranty information  Online product registration information  ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-S10TW 240W S-Series 1" Silk Dome Tweeter Set The S-S10TW Tweeter’s compact size and wide frequency range are an efficient and affordable upgrade to any factory or aftermarket sound system. The S-S10TW Tweeter’s motor structure was designed to reduce distortion and increase output at high volumes, so you can turn your music up and still experience crystal clear sound. Brighten up your sound stage without sounding overpowering or compromising sound quality. The silk dome design minimizes harsh highs and produces a warm and mellow tone.  General Features: 1-Inch Dome Tweeter Peak Power Handling: 240 Watts RMS Power Handling: 80 Watts Impedance: 6 ohms Sensitivity: 88dB SPL (1W @1m) Frequency Response: 1k Hz to 22kHz Mounting Depth: 3/4" (1.8cm) Cutout Diameter: 2" (5.1cm) circle Recommended Amplification: up to 80 watts RMS per channel Authorized Internet Dealer 1-year Manufactures Warranty What's in the S-S10TW package: S-S10TW owner's manual 2 Tweeters 2 Flush mount housings Two 38" Wires with in-line crossovers 2 Flush mount retention rings  2 Stealth brackets  2 Alpine logo badges  Warranty information  Online product registration information  ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

4 XP Audio XBT200 1-Inch Titanium Horn Bullet High Compression Tweeter for Car, Van, ATV, UTV, Marine, Boat, Motorcycle, Motorsports, and Competition XP Audio XBT200 1" heavy-duty titanium super tweeters. XP Audio XBT200 1-inch high compression titanium bullet tweeter features flat sides that allow for close side by side mounting. With a high-frequency response of up to 20,000 Hz and a sensitivity of 108 dB at 1W/1m. XP Audio Professional grade super tweeters that can handle high frequencies with ease and meticulously designed tweeters to sound as good as they look. XP Audio Drivers are all manufactured with close attention to detail and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. Absolute USA Tweeter Drivers are second to none and feature solid construction and accurate power handling ratings.High-Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system.General Features: 1" / 25mm Titanium Bullet High Compression Tweeter 11 Oz Ferrite Magnet mounting depth of 2-1/2" High-Temperaturerature Kapton Voice Coil, Peak Power Handling- 200W (Per Tweeter) @ 4-Ohm RMS Power Handling: 50W (Per Tweeter) @ 4-Ohm Impedance 8 OHMS, Crossover Capacitor Included 1.75" High-Temperature Kapton Voice Coil Oversized Magnetic for less Distortion Front mount design for easy installation Diamond Chrome Cutting Finish Die-Cast Aluminum Frame Ferro-Fluid Voice Coil Cooling Extreme SPL Output without clippingRubber suspension diaphragm surround for smooth response In-line Capacitor Crossover Included and Connected to Positive Terminal Frequency Response: 2.5 kHz - 20 kHz High 108 dB sensitivity Measurements: Overall depth 2.71 inches (69 mm) Mounting depth 1.74 inches (44 mm) Overall width 2.28 inches (58 mm) Cutout diameter 3.6 inches (92 mm) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov