Car Speakers & Subwoofers (498)

 2 Rockford Fosgate P3D2-15 Punch P3 15" dual 2-ohm voice coils 1200 Watts Car Subwoofers The P3D2-15 is the best-performing Rockford Fosgate Punch series subwoofer. The P3 15” features Dual 2-Ohm voice coils, 600 Watts RMS of power handling, and accommodates a grille insert using the included cast aluminum trim ring.The P3D2-15 is Rockford Fosgate's best-performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones, dust caps, and unique spider venting to keep the motor more relaxed than previous versions. These feature VAST technology to increase surface cone area up to 25% and a FlexFit basket for extreme installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. General Features: 15" Dual 2 ohm Punch Stage 3 Subwoofer Peak Power Handling: 1200 watts RMS Power Handling: 600 watts Recommended power range: 300 - 700 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.5" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Mounting Depth: 7.58" (192.5 mm) Cutout Diameter: 13.94" (353 mm) Magnet Weight: 96 oz Frequency Response: 21.7 - 250 Hz Xmax: 15.2mm Sensitivity: 86 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 2.66ft³ Recommended Sealed Enclosure: 1.58ft³ Authorized Internet Dealer 1-year Manufacturer's Warranty Shipping Weight: 23.3 Lbs. (10.56 kg) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

 Rockford Fosgate P3D2-15 Punch P3 15" dual 2-ohm voice coils 1200 Watts Car Subwoofers The P3D2-15 is the best-performing Rockford Fosgate Punch series subwoofer. The P3 15” features Dual 2-Ohm voice coils, 600 Watts RMS of power handling, and accommodates a grille insert using the included cast aluminum trim ring.The P3D2-15 is Rockford Fosgate's best-performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones, dust caps, and unique spider venting to keep the motor more relaxed than previous versions. These feature VAST technology to increase surface cone area up to 25% and a FlexFit basket for extreme installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. General Features: 15" Dual 2 ohm Punch Stage 3 Subwoofer Peak Power Handling: 1200 watts RMS Power Handling: 600 watts Recommended power range: 300 - 700 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.5" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Mounting Depth: 7.58" (192.5 mm) Cutout Diameter: 13.94" (353 mm) Magnet Weight: 96 oz Frequency Response: 21.7 - 250 Hz Xmax: 15.2mm Sensitivity: 86 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 2.66ft³ Recommended Sealed Enclosure: 1.58ft³ Authorized Internet Dealer 1-year Manufacturer's Warranty Shipping Weight: 23.3 Lbs. (10.56 kg) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

 Rockford Fosgate P3D2-15 Punch P3 15" dual 2-ohm voice coils 1200 Watts Car Subwoofers The P3D2-15 is the best-performing Rockford Fosgate Punch series subwoofer. The P3 15” features Dual 2-Ohm voice coils, 600 Watts RMS of power handling, and accommodates a grille insert using the included cast aluminum trim ring.The P3D2-15 is Rockford Fosgate's best-performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones, dust caps, and unique spider venting to keep the motor more relaxed than previous versions. These feature VAST technology to increase surface cone area up to 25% and a FlexFit basket for extreme installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. General Features: 15" Dual 2 ohm Punch Stage 3 Subwoofer Peak Power Handling: 1200 watts RMS Power Handling: 600 watts Recommended power range: 300 - 700 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.5" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Mounting Depth: 7.58" (192.5 mm) Cutout Diameter: 13.94" (353 mm) Magnet Weight: 96 oz Frequency Response: 21.7 - 250 Hz Xmax: 15.2mm Sensitivity: 86 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 2.66ft³ Recommended Sealed Enclosure: 1.58ft³ Authorized Internet Dealer 1-year Manufacturer's Warranty Shipping Weight: 23.3 Lbs. (10.56 kg) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik MWT-80BL 8″ Marine Wake Tower Speakers with RGB LED Lights Power Acoustik RGB Wake Tower Speakers contain quality components and bring light into the weekend! With experience in making marine-grade compliant products, we have what you need for your Truck, Boat, UTV, ATV Toys… The MWT Series' rugged yet satin design provides consumers with trouble-free, waterproof (IP65), and excellent sound quality. Engineered for various elements, these full-range speakers are a great addition to your marine application or any Powersports lifestyle! The MWT Speakers are available in 6.5″ and 8″, with power handling ratings up to 850w MAX Power. It is also outfitted with hidden RGB LED lights, high-density injection-molded plastic, UV coating, and NEW Swivel mounting brackets. All speakers sold as pairs come with swivel clamps for the most straightforward installation. It includes customizable RGB lighting & RF Remote to match your boat’s theme. General Features: Built-in Hidden RGB Lighting Wireless Remote Control Included 100% Waterproof Enclosure and Speaker System Polypropylene Speaker Cone & Titanium Tweeter 8″ Waterproof Marine Wake Tower Speakers Peak Power Handling: 850 watts per pair / 425 watts each RMS Power Handling: 425 watts per pair / 215 watts each Polypropylene Speaker Cone NEW Swivel Mounting System Full Function RF Remote Control LED Functions High-Density ABS Construction w/ UV Coating 100% Waterproof Enclosure & Speakers System Steel Reinforced Mounting Bracket System Fits Most Towers Braided Stainless Steel Safety Cable Included CEA-2031 compliant speakers Injection Speaker Cone Titanium Tweeters Meets ROHS and CE Certifications 4 ohms impedance Frequency Response: 30-20,000 Hz Dimensions: 10" W x 10" H x 9.6" D Authorized Internet Dealer 1-year Manufacturer's Warranty    ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik MWT-80T 8″ Waterproof Marine Wake Tower Speakers (Pair) Titanium Power Acoustik went the extra mile to make these speakers marine-grade. It was built from the ground up to be the finest possible speaker for your off-road vehicles, motorcycles, or personal watercraft. It made splash-and-spray-resistant sealed motors, cones, and sealed terminal covers. Even the grilles have a built-in drainage port to prevent standing water. It’s all engineered to maintain top-shelf performance for years to come. General Features: 100% Waterproof Enclosure & Speakers System High-Density ABS Construction w/ UV Coating Steel Reinforced Mounting Bracket System Fits Most Towers Braided Stainless Steel Safety Cable Included Injection Speaker Cone & Tititamnm Tweeters Meets ROHS and CE Certifications 4-Ohm Speaker Impedance Peak Power Handling: 750 Watts RMS Power Handling: 375 Watts  Frequency Response 30-20kHz System Efficiency 90dB(1w/1m) Dimensions 10" W x 10" H x 9.6" L Mounting Bracket Features Upper Mounting Bracket Lower Mounting Bracket Mounting Bracket Base Minimum 1.26″/32mm Size Bar Maximum 2.25″/57.15mm Size Bar Pair of 8″ Wake Tower Speakers Mounting Bracket for Ea Speaker 1-year manufacturer warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik MWT-80W 8″ Waterproof Marine Wake Tower Speakers (Pair) White Power Acoustik went the extra mile to make these speakers marine-grade. It was built from the ground up to be the finest possible speaker for your off-road vehicles, motorcycles, or personal watercraft. It made splash-and-spray-resistant sealed motors, cones, and sealed terminal covers. Even the grilles have a built-in drainage port to prevent standing water. It’s all engineered to maintain top-shelf performance for years to come. General Features: 100% Waterproof Enclosure & Speakers System High-Density ABS Construction w/ UV Coating Steel Reinforced Mounting Bracket System Fits Most Towers Braided Stainless Steel Safety Cable Included Injection Speaker Cone & Tititamnm Tweeters Meets ROHS and CE Certifications 4-Ohm Speaker Impedance Peak Power Handling: 750 Watts RMS Power Handling: 375 Watts Frequency Response 30-20kHz System Efficiency 90dB(1w/1m) Dimensions 10" W x 10" H x 9.6" L Mounting Bracket Features Upper Mounting Bracket Lower Mounting Bracket Mounting Bracket Base Minimum 1.26″/32mm Size Bar Maximum 2.25″/57.15mm Size Bar Pair of 8″ Wake Tower Speakers Mounting Bracket for Ea Speaker 1-year manufacturer warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik MWT-65T 6.5″ Waterproof Marine Wake Tower Speakers (Pair) Titanium Power Acoustik went the extra mile to make these speakers marine-grade. It was built from the ground up to be the finest possible speaker for your off-road vehicles, motorcycles, or personal watercraft. It made splash-and-spray-resistant sealed motors, cones, and sealed terminal covers. Even the grilles have a built-in drainage port to prevent standing water. It’s all engineered to maintain top-shelf performance for years to come. General Features: 6.5" Wakeboard Tower Speaker Enclosure Peak Power Handling: 500 watts RMS Power Handling: 250 watts Nominal impedance: 4 Ohms Color: Titanium 100% Waterproof Enclosure and Speaker System High-Density ABS Construction w/ UV Coating Steel-reinforced Mounting Bracket fits most towers Braided Stainless Steel Safety Cable Included Stainless Steel Mounting Hardware Included Polypropylene speaker cone and Titanium Tweeter Quick Disconnect Compression Terminals Meets ROHS and CE Certifications Frequency response: 40 - 20,000 Hz Sensitivity: 90 dB Dimensions: 8.5" H x 8.5" W x 9.0" L Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik MWT-65BL 6.5″ Marine Wake Tower Speakers with RGB LED Lights Power Acoustik RGB Wake Tower Speakers contain quality components and bring light into the weekend! With experience in making marine-grade compliant products, we have what you need for your Truck, Boat, UTV, ATV Toys… The MWT Series' rugged yet satin design provides consumers with trouble-free, waterproof (IP65), and excellent sound quality. Engineered for various elements, these full-range speakers are a great addition to your marine application or any Powersports lifestyle! The MWT Speakers are available in 6.5″ and 8″, with power handling ratings up to 850w MAX Power. It is also outfitted with hidden RGB LED lights, high-density injection-molded plastic, UV coating, and NEW Swivel mounting brackets. All speakers sold as pairs come with swivel clamps for the most straightforward installation. Included customizable RGB lighting & RF Remote to match your boat’s theme General Features: Built-in Hidden RGB Lighting Wireless Remote Control Included 100% Waterproof Enclosure and Speaker System 6.5″ Waterproof Marine Wake Tower Speakers Peak Power Handling: 600 watts per pair / 300 watts each RMS Power Handling: 300 watts per pair / 150 watts each Polypropylene Speaker Cone NEW Swivel Mounting System Full Function RF Remote Control LED Functions High-Density ABS Construction w/ UV Coating 100% Waterproof Enclosure & Speakers System Steel Reinforced Mounting Bracket System Fits Most Towers Braided Stainless Steel Safety Cable Included CEA-2031 compliant speakers Injection Speaker Cone Titanium Tweeters Meets ROHS and CE Certifications 4 ohms impedance Frequency Response: 40-20,000 Hz Dimensions: 8.5" W x 8.5" H x 9" D Authorized Internet Dealer 1-year Manufacturer's Warranty   ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik MWT-65W 6.5″ Waterproof Marine Wake Tower Speakers (Pair) White Power Acoustik went the extra mile to make these speakers marine-grade. It was built from the ground up to be the finest possible speaker for your off-road vehicles, motorcycles, or personal watercraft. It made splash-and-spray-resistant sealed motors, cones, and sealed terminal covers. Even the grilles have a built-in drainage port to prevent standing water. It’s all engineered to maintain top-shelf performance for years to come. General Features: 100% Waterproof Enclosure & Speakers System High-Density ABS Construction w/ UV Coating Steel Reinforced Mounting Bracket System Fits Most Towers Braided Stainless Steel Safety Cable Included Injection Speaker Cone & Tititamnm Tweeters Meets ROHS and CE Certifications  Speaker Specs 4-Ohm Speaker Impedance 500w MAX Power Handling 250w RMS Power Handling Frequency Response 40-20kHz System Efficiency 90dB(1w/1m) Dimensions 8.5w x 8.5h x 9d Mounting Bracket Features Upper Mounting Bracket Lower Mounting Bracket Mounting Bracket Base Minimum 1.26″/32mm Size Bar Maximum 2.25″/57.15mm Size Bar Included In Box Pair of 6.5″ Wake Tower Speakers Mounting Bracket for Ea Speaker 1-year manufacturer warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.