Rockford Fosgate (344)

2 Rockford Fosgate R2D4-12 Prime R2 DVC 4 Ohm 12-Inch 250 Watts RMS 500 Watts Peak Subwoofer Car Audio Fanatics wanting big bass can rely on the Prime R2D4-12 subwoofer. This 12” subwoofer handles 250 Watt RMS and the 4-Ohm Dual Voice Coil design lets you wire them in various configurations.General Features: 12" Dual 4 Ohm Prime Stage 2 Series Subwoofer Power Handling Peak: 500 Watts RMS: 250 Watts Impedance: 4 Ohm Mica Injected Polypropylene Cone Black Raised Surround Linear Spider With 16 AWG Woven Tinsel Leads Stamp cast Basket with Integrated Spider Venting Cea-2031 Compliant Accurate Power Handling Rating Designed for Use with Sealed and Vented Enclosures High-Temperature Voice Coil Integrated PVC Trim Ring Anodized Aluminum Voice Coil Former Frequency Response: 43-250 Hz Sensitivity: 89 Db Top-Mount Depth: 5-1/8" Sealed Box Volume: 1.02 Cubic Feet Ported Box Volume: 1.79 Cubic Feet ⚠️Warning:Cancer and Reproductive Harm-Www.P65warnings.Ca. Gov

  2 Rockford Fosgate Prime R2D4-10 500W Max 250W RMS 10" Dual 4-Ohm R2 Prime Series Subwoofer Rockford Fosgate Prime R2 10” subwoofers provide high-performance bass at an unbelievable value. This model features a laser etched curvilinear dust-cap to dissipate heat generated by the high‐temp copper voice coil as well as a solid stamped steel frame with integrated frame-mounted compression terminals. Best of all, they are optimized for both sealed and vented enclosures. Car Audio Fanatics who want Rockford Fosgate quality can rely on the Prime Series 10" subwoofers to get the job done and the Dual Voice Coil provides awesome installation flexibility. These drivers can pump out the bass due to their mica injected polypropylene cone, and their stamp-cast baskets with spider venting - typically reserved for more expensive models - keep the motor running cool! These R2 subwoofers are optimized for sealed and vented enclosures. General Features: 10" Dual 4-Ohm Prime Series Subwoofer 250 Watts RMS Power Handling 400 Watts Max Power Handling Recommended power range: 175 - 300 watts RMS CEA-2031 compliant Verified with Klippel speaker certification 12 AWG compression terminals Fiber-reinforced painted paper-pulp woofer cone High temperature 2" voice coil Laser-etched aluminum dust cap High durability compressed foam surround Proprietary powder coated stamped steel frame with spider cavity venting Fatigue resistant poly-cotton spider with integral woven leads High-temperature copper voice coil with aluminum former 12 AWG compression terminals Anodized aluminum voice coil former Optimized for both sealed and vented enclosures Mica injected polypropylene cone Linear spider with embedded 16 AWG tinsel leads StampCast basket with integrated spider venting Integrated ABS decorative trim ring Mounting Depth: 4.319" Cutout Diameter: 9.125" Magnet Weight: 43oz Frequency Response: 45 - 250 Hz Xmax: 6.5mm Sensitivity: 87 dB @ 1 watt / 1 meter Optimized for sealed enclosures Recommended Sealed Enclosure: 0.50 - 0.85ft³ Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Rockford Fosgate RFK1D DUAL AMP 1/0 AWG Amplifier WIRING KIT True Gauge 100% Pure Crystal-Oxygen Free Copper, 1/0 gauge complete power, ground, and signal installation kit for two amplifiers. General Features: 1/0 gauge Complete Dual Amplifier Installation Kit Designed specifically for 2400 watts+ car audio systems Premium power and ground wire provides optimal power transfer Made from 100% Pure Crystal-Oxygen Free Copper for a pure uninterrupted transfer of power Includes Three 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier RCA Interconnects are made with twisted-pair technology for noise reduction Terminals are Nickel-plated for excellent signal transfer ANL/MAXI Fuse holder offers ideal protection for High powered systems True-to-Gauge cables/wires meet or exceed the industry standard of copper required for the gauge size Authorized Internet Dealer 1-year Manufacturer's Warranty Package RFK1D Includes: 17 ft. of 4,704 strand 1/0 AWG Red power cable 3 ft. of 4,704 strand 1/0 AWG Gray ground cable 4 ft. of 1,862 strands 4 AWG Red power cable 4 ft. of 1,862 strands 4 AWG Gray ground cable (3) 16ft. of Gray twisted pair shielded RCA cable 30 ft. 65 strands of 16 AWG Gray speaker wire 20 feet of remote wire ANL/MAXI fuse holder and fuse 300 Amp fuse (2) 4 AWG distribution block Ground bolt/screw Cable Ties Butt connectors Spade Terminals Firewall Grommet   ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

  Rockford Fosgate RFK1D DUAL AMP 1/0 AWG Amplifier WIRING KIT True Gauge 100% Pure Crystal-Oxygen Free Copper, 1/0 gauge complete power, ground, and signal installation kit for two amplifiers. General Features: 1/0 gauge Complete Dual Amplifier Installation Kit Designed specifically for 2400 watts+ car audio systems Premium power and ground wire provides optimal power transfer Made from 100% Pure Crystal-Oxygen Free Copper for a pure uninterrupted transfer of power Includes Three 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier RCA Interconnects are made with twisted-pair technology for noise reduction Terminals are Nickel-plated for excellent signal transfer ANL/MAXI Fuse holder offers ideal protection for High powered systems True-to-Gauge cables/wires meet or exceed the industry standard of copper required for the gauge size Authorized Internet Dealer 1-year Manufacturer's Warranty Package RFK1D: 17 ft. of 4,704 strands 1/0 AWG Red power cable Three ft. of 4,704 strands 1/0 AWG Gray ground cable Four ft. of 1,862 strands 4 AWG Red power cable Four ft. of 1,862 strands 4 AWG Gray ground cable (3) 16ft. of Gray twisted pair shielded RCA cable 30 ft. 65 strands of 16 AWG Gray speaker wire 20 feet of remote wire ANL/MAXI fuse holder and fuse 300 Amp fuse (2) 4 AWG distribution block Ground bolt/screw Cable Ties Butt connectors Spade Terminals Firewall Grommet ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate 600W Punch Series 4-Channel Stereo Class AB Car Power Amplifier The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels. The Punch P600X4 multi-channel amplifier is versatile to power any audio system configuration. The stealth top-mounted control panel not only provides a sleek finished look to the amp but also protects the vital controls. Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand. General Features: Punch Series 4-Channel Class AB Car Amplifier RMS Power Rating: 4 ohms: 75 watts x 4 channel 2 ohms: 150 watts x 4 channel Bridged, 4 ohms: 300 watts x 2 channel MOSFET power supply Remote bass level input (remote level control sold separately) LED power, thermal, and protect indicators Tuned Bass EQ (0-18 dB bass boost at 45 Hz or 0-14 dB bass boost at 12 kHz depending on crossover selection) On-board differential inputs eliminate noise picked up by the signal cable 4/3/2 or Mono channel operation Integrated Trans ana technology simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality RCA Pass-thru outputs MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowers the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low Nickel-plated RCA level inputs Nickel-plated captive C-clamp terminals Variable high-pass filter (50-250 Hz, Butterworth, 12 dB/octave) Variable low-pass filter (50-250 Hz, Butterworth, 12 dB/octave) CEA-2006 compliant amplifier Frequency response: 20-20000 Hz Dimensions: 13-5/16"L x 7-3/4"W x 2-3/8"H 4-Channel amplifier Four 1-1/2" Self-tapping screws 2.5mm Allen wrench Quick setup instructions Certificate of Performance Rockford Fosgate Punch P600X4 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate Punch P600X4 600W Punch Series 4-Ch Stereo Class AB Car AMP The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels. The Punch P600X4 multi-channel amplifier is versatile to power any audio system configuration. The stealth top-mounted control panel not only provides a sleek finished look to the amp but also protects the vital controls. Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand. General Features: Punch Series 4-Channel Class AB Car Amplifier RMS Power Rating: 4 ohms: 75 watts x 4 channel 2 ohms: 150 watts x 4 channel Bridged, 4 ohms: 300 watts x 2 channel MOSFET power supply Remote bass level input (remote level control sold separately) LED power, thermal, and protect indicators Tuned Bass EQ (0-18 dB bass boost at 45 Hz or 0-14 dB bass boost at 12 kHz depending on crossover selection) On-board differential inputs eliminate noise picked up by the signal cable 4/3/2 or Mono channel operation Integrated Trans ana technology simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality RCA Pass-thru outputs MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowers the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low Nickel-plated RCA level inputs Nickel-plated captive C-clamp terminals Variable high-pass filter (50-250 Hz, Butterworth, 12 dB/octave) Variable low-pass filter (50-250 Hz, Butterworth, 12 dB/octave) CEA-2006 compliant amplifier Frequency response: 20-20000 Hz Dimensions: 13-5/16"L x 7-3/4"W x 2-3/8" 4-Channel amplifier Four 1-1/2" Self-tapping screws 2.5mm Allen wrench Quick setup instructions Certificate of Performance Rockford Fosgate Punch P600X4 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate 600W Punch Series 4-Channel Stereo Class AB Car Power Amplifier The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels. The Punch P600X4 multi-channel amplifier is versatile to power any audio system configuration. The stealth top-mounted control panel not only provides a sleek finished look to the amp but also protects the vital controls. Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand. General Features: Punch Series 4-Channel Class AB Car Amplifier RMS Power Rating: 4 ohms: 75 watts x 4 channel 2 ohms: 150 watts x 4 channel Bridged, 4 ohms: 300 watts x 2 channel MOSFET power supply Remote bass level input (remote level control sold separately) LED power, thermal, and protect indicators Tuned Bass EQ (0-18 dB bass boost at 45 Hz or 0-14 dB bass boost at 12 kHz depending on crossover selection) On-board differential inputs eliminate noise picked up by the signal cable 4/3/2 or Mono channel operation Integrated Trans ana technology simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality RCA Pass-thru outputs MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowers the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low Nickel-plated RCA level inputs Nickel-plated captive C-clamp terminals Variable high-pass filter (50-250 Hz, Butterworth, 12 dB/octave) Variable low-pass filter (50-250 Hz, Butterworth, 12 dB/octave) CEA-2006 compliant amplifier Frequency response: 20-20000 Hz Dimensions: 13-5/16"L x 7-3/4"W x 2-3/8"H What is in the box: 4-Channel amplifier Four 1-1/2" Self-tapping screws 2.5mm Allen wrench Quick setup instructions Certificate of Performance Rockford Fosgate Punch P600X4 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.ca.gov

Rockford Fosgate 600W Punch Series 4-Channel Stereo Class AB Car Power Amplifier The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels. The Punch P600X4 multi-channel amplifier is versatile to power any audio system configuration. The stealth top-mounted control panel not only provides a sleek finished look to the amp but also protects the vital controls. Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand. General Features: Punch Series 4-Channel Class AB Car Amplifier RMS Power Rating: 4 ohms: 75 watts x 4 channel 2 ohms: 150 watts x 4 channel Bridged, 4 ohms: 300 watts x 2 channel MOSFET power supply Remote bass level input (remote level control sold separately) LED power, thermal, and protect indicators Tuned Bass EQ (0-18 dB bass boost at 45 Hz or 0-14 dB bass boost at 12 kHz depending on crossover selection) On-board differential inputs eliminate noise picked up by the signal cable 4/3/2 or Mono channel operation Integrated Trans ana technology simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality RCA Pass-thru outputs MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowers the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low Nickel-plated RCA level inputs Nickel-plated captive C-clamp terminals Variable high-pass filter (50-250 Hz, Butterworth, 12 dB/octave) Variable low-pass filter (50-250 Hz, Butterworth, 12 dB/octave) CEA-2006 compliant amplifier Frequency response: 20-20000 Hz Dimensions: 13-5/16"L x 7-3/4"W x 2-3/8"H What is in the box: 4-Channel amplifier Four 1-1/2" Self-tapping screws 2.5mm Allen wrench Quick setup instructions Certificate of Performance Rockford Fosgate Punch P600X4 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.