Rockford Fosgate (329)

Rockford Fosgate Punch P3D4-12 1200W Max, 600W RMS 12" Punch P3 Series Dual 4-Ohm Car Subwoofer The P3D4-12 is Rockford Fosgate's best-performing Punch series subwoofer for cars and trucks. The P3 12-inch subwoofers now feature anodized aluminum cones and dust caps along with unique spider venting to keep the motor cooler than previous versions. These feature VAST technology to increase surface cone area up to 25% and a Flex Fit basket for extreme car and truck installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. General Features: 12" Punch P3 Series Dual 4 Ohm Subwoofer Power Handling: Peak: 1200 watts per sub Power Handling: RMS: 600 watts per sub Impedance: 4 ohms Anodized aluminum heat sinking cone & dust cap for strength and durability Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area Dual tear & fatigue resistant linear poly-cotton spiders Optimized motor magnetics with extended pole and bumped backplate Fatigue-resistant and reduced-strain stitched tinsel leads Multi-point high temp/strength neck joint bonding technique Sturdy 16-gauge compound bend frame geometry Semi-Flexible PVC removable protective motor cover Custom insulated compression input terminal assembly Proprietary spider venting/cooling technique Decorative die-cast trim ring Custom 10-AWG nickel-plated push terminals High-temperature 4-layer 2-1/2" voice coil with spun laced Nomex insulating reinforcement collar 102 oz Double stacked ferrite magnet structure Frequency response: 27.7-250 Hz Sensitivity: 85 dB Xmax: 16.2 mm Mounting Depth: 6-11/16" Cutout Diameter: 11-1/4" Authorized Internet Dealer What's in the P3D4-12 package: One 12" Dual 4-ohm voice coil subwoofer Trim ring Twelve 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual (English/ French/ Spanish/ German) Rockford Fosgate P3D4-12 owner's manual ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

Rockford Fosgate Punch P3D4-10 P3 Series DVC 4-Ohm 10-Inch 500-Watt RMS 1000 Watts Peak Subwoofer + 10" Mesh Grille The Rockford Fosgate P3D4-10 is the best-performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones and dust caps along with unique spider venting to keep the motor cooler than previous versions. These subs feature VAST technology to increase surface cone area to 25% and a Flex Fit basket for extreme installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. 10" Punch P3 Series Dual 4 Ohm Subwoofer General Feature: 10" Punch P3 Series Dual 4 Ohm Subwoofer Power Handling: Peak: 1,000 watts Power Handling: RMS: 500 watts Impedance: 4 ohm Anodized aluminum heat sinking cone & dust cap for strength and durability Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area Dual tear & fatigue resistant linear poly cotton spiders Optimized motor magnetics with extended pole and bumped backplate Fatigue-resistant and reduced-strain stitched tinsel leads Multipoint high temp/strength neck joint bonding technique Sturdy 16-gauge compound bend frame geometry Semi-Flexible PVC removable protective motor cover Custom insulated compression input terminal assembly Proprietary spider venting/cooling technique Decorative die-cast trim ring Custom 10-AWG nickel-plated push terminals High-temperature 4-layer 2-1/2" voice coil with spun-laced Nomex insulating reinforcement collar Double-stacked ferrite magnet structure Frequency response: 28-250 Hz Sensitivity: 82 dB Xmax: 13.9 mm Mounting Depth: 6-1/4" Cutout Diameter: 9-1/8" Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Matching Amplifiers: (one subwoofer) Rockford Fosgate R750-1D, Parallel @2ohms Rockford Fosgate P1000X1bd, Parallel @2ohms Rockford Fosgate R500X1D, Parallel @2ohms Matching Amplifier: (two subwoofers) Rockford Fosgate P1000X1bd, Parallel @1ohm Rockford Fosgate R1200-1D, Parallel @1ohm Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

 Rockford Fosgate T1675-S Power 6.75" Series Component Speaker System The T1675-S is a 6.75" 2-way component system with 1" fabric dome tweeters and is rated at 80 watts RMS. The system includes a pair of tweeters, two woofers with grilles, dedicated crossovers, and mounting hardware. General Features: 6-3/4" / 6-1/2" T1 Power Series 2-Way Car Speakers Power Handling: Peak: 240 watts per pair / 120 watts each RMS: 160 watts per pair / 80 watts each Injection-Molded Carbon Fiber-filled Polypropylene cone material 1" Treated-Cloth Dome tweeters Butyl Rubber speaker surround CEA-2031 compliant speakers 1" high-temperature voice coil Multi-OEM Adapter allows shallow mount and compatibility to many vehicles DDC (Discreet Dual Clamp) provides concentric clamping pressure to maximize fitment FlexFit (Slot Mounted Frame Pattern) allows slight adjustment of speaker when mounted VAST (Vertical Attach Surround Technique) provides up to 25% more effective radiating cone area Includes external crossover filters Rubber magnet boot cover 3 level tweeter attenuation Grilles and mounting hardware included 4 ohms impedance Frequency response: 55-22,000 Hz Top-mount depth: 2-1/2" Sensitivity: 89dB 1-year manufacture Warranty What's in the T1675-S package: Two 6-3/4" Woofers 2 Woofer grilles Two 1" Tweeters 2 Crossovers 2 Front flush mount tweeter brackets 2 Rear flush mount tweeter brackets 2 Surface mount tweeter housings 4 Tweeter trim rings Two 6x9/5x7 Adapter brackets Two M4x25mm Machine screws Two M4x10mm Machine screws Two M4x15mm Stud bolts Eight 1-1/4" Allen head screws 3mm Allen head bit 8 Speed clips Installation/Operation Instructions T1675-S owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

  Rockford Fosgate T165-S T1 Power 6.5-Inch Component Speaker System The T165-S is a 6.5" 2-way component system with 1" fabric dome tweeters and is rated at 80 watts RMS. The system includes a pair of tweeters, two woofers with grilles, dedicated crossovers, and mounting hardware. General Features: 6-1/2" T1 POWER Series 2-Way Car Speakers Power Handling: Peak: 320 watts per pair / 160 watts each RMS: 160 watts per pair / 80 watts each Injection-Molded Carbon Fiber-filled Polypropylene cone material 1" Treated-Cloth Dome tweeters Butyl Rubber speaker surround CEA-2031 compliant speakers 1" high-temperature voice coil Multi-OEM Adapter allows shallow mount and compatibility to many vehicles DDC (Discreet Dual Clamp) provides concentric clamping pressure to maximize fitment FlexFit (Slot Mounted Frame Pattern) allows slight adjustment of speaker when mounted VAST (Vertical Attach Surround Technique) provides up to 25% more effective radiating cone area Includes external crossover filters Rubber magnet boot cover 3 level tweeter attenuation Grilles and mounting hardware included 4 ohms impedance Frequency response: 60-22,000 Hz Top-mount depth: 2-15/16" Sensitivity: 86dB 1-year Manufacturer Warranty What's in the T165-S package: Two 6-1/2" Woofers 2 Woofer grilles Two 1" Tweeters 2 Front flush mount brackets 2 Rear flush mount brackets 2 Surface mounting housings 4 Tweeter trim rings Two 6x9/5x7 Adapter brackets Two M4x25mm Machine screws Two M4x10mm Machine screws Two M4x15mm Stud bolts Eight 1-1/4" Allen head screws 3mm Allen head bit 8 Speed clips Installation/Operation Instructions T165-S owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate T16-S Power 6" Series Component Speaker System The T16-S is a 6" 2-way component system with 1" fabric dome tweeters and is rated at 80 watts RMS. The system includes a pair of tweeters, two woofers with grilles, dedicated crossovers, and mounting hardware. General Features: 6" T1 POWER Series 2-Way Car Speakers Power Handling: Peak: 320 watts per pair / 160 watts each RMS: 160 watts per pair / 80 watts each Injection-Molded Mineral filled Polypropylene cone material 1" Treated Fabric Soft Dome tweeters Butyl Rubber speaker surround CEA-2031 compliant speakers 1" high-temperature voice coil Multi-OEM Adapter allows shallow mount and compatibility to many vehicles DDC (Discreet Dual Clamp) provides concentric clamping pressure to maximize fitment FlexFit (Slot Mounted Frame Pattern) allows slight adjustment of speaker when mounted VAST (Vertical Attach Surround Technique) provides up to 25% more effective radiating cone area Tweeter protection with a bypass resistor for long life External audiophile-grade component crossover Three-level tweeter attenuation Rubber magnet boot cover Grilles and mounting hardware included 4 ohms impedance Frequency response: 60-22,000 Hz Top-mount depth: 1-15/16" Sensitivity: 86dB 1-year Manufacturer Warranty What's in the T16-S package: 2 Woofers 2 Woofer grilles 2 Tweeters (6" speaker wire attached terminated with female quick-slide connectors) 2 Crossovers 2 Front flush mount brackets 2 Rear flush mount brackets 2 Angled surface mounting housings 2 Polished tweeter trim rings 2 Brushed tweeter trim rings Two 6x9/5x7 Adapter brackets Two M4x25mm Machine screws Two M4x10mm Machine screws Two M4x15mm Stud bolts Eight 1-1/4" Allen head screws 3mm Allen head bit 8 Speed clips Installation/Operation Instructions T16-S owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate Prime R165X3 Car Speaker 180W Peak, 90W RMS 6.5" 3-Way PRIME Series Coaxial Speakers w/ Silk Tweeters The Rockford Fosgate R165X3 is a 6.50” 3-way full-range speaker rated at 45 watts RMS for a new generation of factory replacement speakers. Kit includes two speakers with grilles, integrated high pass crossovers, and mounting hardware. The 6.50" Prime full-range speakers offer Rockford Fosgate sound quality at a fantastic value. Perfect for replacing factory speakers, they feature polypropylene cones, a silk dome Piezo tweeter, and midrange. Includes grilles so they look as good as they sound. General Features: Vacuum Polypropylene cone Rubber surround Stamped steel basket Silk dome pole mounted Piezo tweeter and midrange Integrated tweeter crossover Grilles and mounting hardware included CEA-2031 Compliant Configuration: 3-Way Full-Range Midrange Diameter (in): 6.5" Midrange Depth (in): 2.15" (54.5mm) Tweeter Diameter (in): .50" (12mm) Frequency Response: 52Hz - 20kHz Nominal Impedance: 4-Ohm Power Handling (RMS): 45 Watts RMS 90 Watts MAX Crossover: Tweeter High-Pass (HP): 6dB Sensitivity (dB @ 1 watt/1 meter): 91 dB Grilles Included: Yes Mounting Hardware: Yes Priced Per Pair Authorized Dealer 1 Year Warranty What's in the R165X3 package: Two 3-Way speakers 2 Grilles Two 15' Lengths of speaker wire Eight 1-1/4" Self-tapping screws 8 Speed clips Installation/Operation manual R165X3 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

  Rockford Fosgate DSR1 8-Channel Digital Signal Processor Rockford Fosgate DSR1 Digital signal processor with Maestro AR amp replacement module adds an aftermarket amp without losing important features. Upgrade your system Your car computer controls its audio system, so upgrading the sound has to include integrating it with your car's digital network. Rockford Fosgate's DSR1 combines an integration module with a full-featured digital signal processor so you can add an aftermarket amplifier without losing any of your factory controls or audio notifications and achieve the high-fidelity sound the system lacked. A simpler way In the past, in order to upgrade a factory system, you'd have first to sum all the outputs, reduce the signal strength to line level, remove the factory EQ and crossover settings, and then apply your custom audio processing and amplification. The DSR-1 simplifies this process by using the unprocessed line-level signals from the factory receiver, so you can tune the sound without fighting the factory settings. Your factory radio still works like it always has, and you retain all your vehicle's features. Rockford Fosgate + iDatalink Maestro = good times The DSR1 includes an iDatalink Maestro AR amplifier replacement module, which can use a vehicle-specific T-harness (sold separately) to supply a clean audio signal plus digital control data to the processor. Using a Windows PC, you go to iDatalink's website and download the firmware for your specific vehicle to your DSR1. It will then be able to translate your vehicle's digital instructions, like turning down the music and making only one speaker active during Bluetooth calls, for example. Fine-tune your sound via your mobile device The DSR1 uses the same technology as Rockford Fosgate's 3Sixty.3 digital signal processor to help you obtain and enjoy amazing sound quality from your vehicle's sound system. After connecting — via Bluetooth to an iOS or Android device — and loading the PerfectTune app, the main user interface screen displays your speaker configuration, an EQ graph, the EQ controls, and more. Eight channels handle almost any system Each channel has its own crossover network, level adjustment, time alignment setting, polarity switch, and 31 bands of equalization, so there's no excuse for anything but perfect sound. The DSR1 offers eight output channels of processed signal for your amplifiers to send on to your tweeters, speakers, and subs. Note: The DSR1 bypasses all factory amplification—compatible aftermarket amplifiers are required.Important Note: This Rockford Fosgate processor can either be used with an iDatalink harness in "Vehicle-specific" mode, or it can operate without needing a vehicle-specific harness in "Universal" mode when upgrading a standard, non-premium factory, or aftermarket system. See "Configuration Menu" under the Details tab for more information. General Features : digital signal processor with factory digital amplifier replacement module add an aftermarket amplifier without losing any factory controls or audio notifications requires Windows PC with an internet connection to download vehicle-specific firmware to the module includes iDatalink Maestro AR interface to retain factory premium audio features works with an optional vehicle-specific T-harness (sold separately) supplies control data as well as audio preamp and speaker-level inputs for use with a non-premium system and no vehicle-specific harness Digital Processing: digital processing technology from Rockford Fosgate's 3Sixty.3 processor digital processing: 147 MIPS speed, 32-bit precision, 72-bit accumulators analog to digital: 24-bit precision, 105 dB dynamic range, -98 dB THD+N digital to analog: 24-bit precision, 108 dB dynamic range, -98 dB THD+N settings and adjustments made via Bluetooth connection to an iOS or Android device running the PerfectTune app Eight assignable inputs Four auxiliary RCA and one optical TOSLINK (S/PDIF) inputs Eight preamp outputs (up to 4 volts) 31-band parametric EQ on all channels crossover filters can be set as all-pass, high-pass, low-pass, bandpass, high-shelf, or low-shelf filters selectable slopes and filter characteristics phase switch on every channel dimensions: 5-1/16"W x 1-1/4"H x 4"W warranty: 1 year Digital signal processor 7" micro USB-to-USB cable 18-pin input harness 16-pin output harness Quick-start guide ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Rockford Fosgate PRIME R165-S 160W Peak 80W RMS 6.5" 2-Way PRIME Series Component Car Audio Speaker System The Prime R165-S is a 6.5" 2-way component system rated at 40 watts RMS for a new generation of factory replacement speakers. Kit includes two woofers with grilles, two tweeters with integrated crossovers, and mounting hardware. General Features: 6-1/2" 2-way PRIME Series Component System Peak Power Handling: 160 watts per set / 80 watts each side RMS Power Handling: 80 watts per set / 40 watts each side Recommended power range: 10 - 50 watts per channel 1/2" (13mm) Mylar balanced dome tweeter with an in-line crossover delivers crisp high-frequency response Easy installation of flush, surface, or angle mounting Mica injected polypropylene cone for extended frequency response and accommodates direct OEM installation Foam surround allows fluid movements for accurate sound reproduction In-line 6dB/octave tweeter crossover filter 1" high-temperature voice coil Perfect for original factory replacement Grilles and mounting hardware included Cold rolled steel frame CEA-2031 compliant speakers Frequency response: 60-20,000 Hz Sensitivity: 89 dB Impedance: 4 Ohm Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the R165-S package: 2 Woofers 2 Tweeters  2 Woofer grilles 2 Flush-mounting tweeter housings 2 Angled surface mounting tweeter housings 2 Flush-mount retaining clips Two 12' lengths of speaker wire Eight 1-1/4" Self-tapping screws Four 5/8" Flat-head screws Installation/Operation instructions R165-S owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.