Rockford Fosgate Class-D Amplifiers (59)

Rockford Fosgate R2-300X4 Prime Series 300 Watts 4-Channel Class D Amplifier  Primed for performance, the R2-300X4 is a 300-watt, full-range Class-D amplifier capable of operating at 4Ω or 2Ω stereo and 4Ω bridged/mono. This amplifier is extremely efficient because of its Class-D technology, which reduces the vehicle's electrical system demand. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. supply that generates more power as voltage increases. General Features: Rockford Fosgate Prime R2-300X4 Class-D Full-Range 4-Channel Amplifier 50 watts RMS x 4 at 4 ohms 75 watts RMS x 4 at 2 ohms 150 watts RMS x 2 bridged output at 4 ohms bridged mode Total power output: 3000 watts Balanced Differential Inputs with RCA Pass Through Outputs High-Level Input Capable Defeat able Auto Turn-On Circuit Features C.L.E.A.N. Set-up 2/4 Channel Input Selection Switch Front and Rear Variable Input Gain adjustment level Continuously Variable on-Board Punch EQ Top Mounted Control Panel Short Circuit & Over Current Protection CEA-2006 Compliant & CE Compliant Full Range Class D Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers 1 Year Warranty Low level: 125mV-5V High level: 250mV-10V Frequency Response: 20 Hz - 20 kHz Hz Total Harmonic Distortion (THD): <1% Variable high-pass filter: 50 - 250 Hz, 24 dB/octave Variable low-pass filter: 50 - 250 Hz, 24 dB/octave Recommended Fuse Rating: 60A Dimensions: 1.9" x "6.8" x "10.1" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2-300X4 package: R2-300X4 Owner's Manual 4-Channel amplifier Two 7" Speaker input harnesses 3mm Allen Hex key Four 3/4" Screws 4 Flat washers Installation and Operation Instructions Certificate of Performance Rockford Fosgate contact information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate R2-250X1 Prime Series mono subwoofer amplifier 250-Watt Monoblock Amplifier Rockford Fosgate's R2 amplifiers are the building blocks for great audio systems, powerful enough even to DRIVE our Punch speakers and subwoofers. They have undergone an amazing upgrade by packing them with the latest features at incredible value. Best of all, they are designed and engineered here in Tempe, Arizona. Primed for performance, the R2-250X1 is a 250-watt, class-D amplifier capable of operating at 4Ω or 2Ω mono. This amplifier is extremely efficient because of its class-D technology, which reduces demand on the vehicle's electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. Perfect for subwoofers, a variable infrasonic filter, and remote level control allows you to tune the bass for the desired level of the music. General Features: Rockford Fosgate Prime R2-250X1 Class-D Full-Range Monoblock Amplifier 320 watts x 1 channel @ 4 Ohms RMS Power 600 watts x 2 channel @ 2 Ohms RMS Power Total power output: 250 watts Balanced Differential Inputs with RCA Pass Through Outputs High-Level Input Capable Defeat able Auto Turn-On Circuit Features C.L.E.A.N. Set-up Variable Input Gain adjustment level R.L.C. Remote Level Control Variable Infrasonic Filter Continuously Variable On Board Punch EQ Top Mounted Control Panel Short Circuit & Over Current Protection CEA-2006 Compliant & CE Compliant Full-Range, Class D Rollback Protection Input Sensitivity: Low-Level: 150 mV - 4 V High-Level: 450 mV - 12 V Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers Frequency Response: 20 Hz - 250 Hz Total Harmonic Distortion (THD): >1% Crossover Controls: Low-Pass: 50 Hz - 250 Hz Sub Infrasonic: 15 Hz - 40 Hz Recommended Fuse Rating: 50A Dimensions: "1.9" x "6.8" x "8.1" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2S-1X12 package: R2S-1X12 owner's manual Sealed enclosure loaded with one 12" woofer 2 Mounting brackets Four 3/4" Self-tapping screws Installation and operation instructions

2 Rockford Fosgate PBR400X4D 400W Compact 4 Channel Punch Series Class D Amplifier 50 watts RMS x 4 designed for stereo front/rear systems that require little space. The BRT (Boosted Rail Technology) is an ultra-efficient design that generates 400 watts of power! The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system. Great for motorcycles and recreational vehicles. The Punch PBR400X4D is a 400 Watt full-range amp designed for compact systems. This efficient 4-channel amp packs a Punch in UTVs, motorcycles, and hybrid-electric vehicles without sucking a lot of juice from your electrical system. General Features: Rockford Fosgate PBR400X4D Class D 4-Channel Amplifier RMS Power Rating: 4 ohms 50 watts x 4 channel RMS Power Rating: 2 ohms 100 watts x 4 channel RMS Power Rating: 1 ohm 1200 watts x 1 channel RMS Power Rating: Bridged 4 ohms 200 watts x 2 channel Total power output: 400 watts CEA-2006 Compliant Amplifier Differential inputs with high-level auto turn-on feature C.L.E.A.N. input/output clip detection and indicator LEDs Selectable Fixed 12dB/Octave Butterworth Crossovers Discrete surface mount technology 4-channel operation Extruded aluminum heatsinks Compact design for stealth installation Frequency Response: 20 Hz to 20000 Hz Total Harmonic Distortion (THD): < 1.0% (100 Hz) Fuse Rating: 40A x 3 Dimensions: "4.25"W x "1.53"H x "6.75"D Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the PBR400X4D package: 4-Channel amplifier Two 15" high-level input harnesses Two 8" speaker-level output harnesses Setup disc (CD) Amplifier Quick Setup Certificate of Performance Verification sheet Class-BR Amplifier Installation Advisory sheet ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate PBR400X4D 400W Compact 4 Channel Punch Series Class D Amplifier 50 watts RMS x 4 designed for stereo front/rear systems that require little space. The BRT (Boosted Rail Technology) is an ultra-efficient design that generates 400 watts of power! The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system. Great for motorcycles and recreational vehicles. The Punch PBR400X4D is a 400 Watt full-range amp designed for compact systems. This efficient 4-channel amp packs a Punch in UTVs, motorcycles, and hybrid-electric vehicles without sucking a lot of juice from your electrical system. General Features: Rockford Fosgate PBR400X4D Class D 4-Channel Amplifier RMS Power Rating: 4 ohms 50 watts x 4 channel RMS Power Rating: 2 ohms 100 watts x 4 channel RMS Power Rating: 1 ohm 1200 watts x 1 channel RMS Power Rating: Bridged 4 ohms 200 watts x 2 channel Total power output: 400 watts CEA-2006 Compliant Amplifier Differential inputs with high-level auto turn-on feature C.L.E.A.N. input/output clip detection and indicator LEDs Selectable Fixed 12dB/Octave Butterworth Crossovers Discrete surface mount technology 4-channel operation Extruded aluminum heatsinks Compact design for stealth installation Frequency Response: 20 Hz to 20000 Hz Total Harmonic Distortion (THD): < 1.0% (100 Hz) Fuse Rating: 40A x 3 Dimensions: "4.25"W x "1.53"H x "6.75"D Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the PBR400X4D package: 4-Channel amplifier Two 15" high-level input harnesses Two 8" speaker-level output harnesses Setup disc (CD) Amplifier Quick Setup Certificate of Performance Verification sheet Class-BR Amplifier Installation Advisory sheet ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate Prime R2-1200X1 mono amplifier 1200W RMS x 1 at 1-ohm monoblock subwoofer amplifier Primed for performance, the R2-1200X1 is a 1200-watt, class-D amplifier capable of operating at 4Ω, 2Ω, or 1Ω mono. This amplifier is extremely efficient because of its class-D technology, which reduces demand on the vehicle's electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. For subwoofers, a variable infrasonic filter and remote level control allow you to tune the bass for the desired level of the music. General Features: Rockford Fosgate Prime R2-1200X1 Class-D Full Range Monoblock Amplifier RMS Power Rating: 4 ohms: 400 watts x 1 chan. 2 ohms: 800 watts x 1 chan. 1 ohm: 1200 watts x 1 chan. Balanced Differential Inputs with RCA Pass Through Outputs High-Level Input Capable Defeatable Auto Turn on Circuit Features C.L.E.A.N. Set-up Variable Input Gain adjustment level R.L.C. Remote Level Control Variable Infrasonic Filter Continuously Variable On-Board Punch EQ Top Mounted Control Panel Short Circuit & Over Current Protection CEA-2006 Compliant & CE Compliant Full Range Class D Rollback Protection Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers Input sensitivity: Low-Level: 150 mV - 4 V High-Level: 450 mV - 12 V Frequency Response: 20 Hz - 250 Hz Total Harmonic Distortion (THD): >1% Low-Pass: 50 Hz - 250 Hz @ 12dB Sub Infrasonic: 15 Hz - 40 Hz Fuse Rating: 120A 4-gauge power and ground wiring are recommended for installation. Dimensions: 1.9" x 6.8" x 11.3" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2-1200X1 package: Mono subwoofer amplifier Wired Remote Level Control module 16' Remote cable (RJ-25 connector on both ends) One 7" Speaker input harness 3mm Allen Hex key Four 3/4" Screws Two 1/2" Screws 5 Flat washers 1 Nut Installation and Operation Instructions Certificate of Performance R2-1200X1 owner’s manual ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate Prime Series R250X4 250 Watts RMS, 4-Channel Class AB Car Audio AmplifierThe Prime R250X4 is a 250-watt 4-channel amplifier capable of running 2-Ohms stereo on all channels and 4-Ohms bridged/mono on the rear channels. Includes on-board Punch Bass and front/rear crossover controls. The Prime R250X4 is a 4-Channel amplifier perfect for any Car Audio Fanatic getting into mobile audio wanting a single amplifier to run a complete audio system. This amplifier features selectable Punch Bass to tune low frequencies, variable crossovers to either protect your high-frequency speakers or feeding only bass to your subwoofers.General Features: 4-channel car amplifier 40 watts RMS x 4 at 4 ohms (60 watts RMS x 4 at 2 ohms) 125 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode) CEA-2006 Compliant variable high- and low-pass filters (50-250 Hz, 12 dB/octave) on front and rear channels selectable bass boost (0, 6, 12 dB at 45 Hz) Class-AB amplifier design MOSFET power supply frequency response: 20-20K Hz preamp and speaker-level inputs 8-gauge power and ground leads and a 50-amp fuse recommended — wiring and hardware not included with amplifier no onboard fuses — when installing multiple amps in a system, an additional 50-amp in-line fuse between the distribution block and this amplifier is recommended Dimensions: 11-1/4"W x 2-1/16"H x 6-13/16"D ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate Prime Series R250X4 250 Watts RMS, 4-Channel Class AB Car Audio Amplifier + Absolute 4 Gauge Amp KitThe Prime R250X4 is a 250-watt 4-channel amplifier capable of running 2-Ohms stereo on all channels and 4-Ohms bridged/mono on the rear channels. Includes on-board Punch Bass and front/rear crossover controls. The Prime R250X4 is a 4-Channel amplifier perfect for any Car Audio Fanatic getting into mobile audio wanting a single amplifier to run a complete audio system. This amplifier features selectable Punch Bass to tune low frequencies, variable crossovers to either protect your high-frequency speakers or feeding only bass to your subwoofers.General Features: 4-channel car amplifier 40 watts RMS x 4 at 4 ohms (60 watts RMS x 4 at 2 ohms) 125 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode) CEA-2006 Compliant variable high- and low-pass filters (50-250 Hz, 12 dB/octave) on front and rear channels selectable bass boost (0, 6, 12 dB at 45 Hz) Class-AB amplifier design MOSFET power supply frequency response: 20-20K Hz preamp and speaker-level inputs 8-gauge power and ground leads and a 50-amp fuse recommended — wiring and hardware not included with amplifier no onboard fuses — when installing multiple amps in a system, an additional 50-amp in-line fuse between the distribution block and this amplifier is recommended Dimensions: 11-1/4"W x 2-1/16"H x 6-13/16"D ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Rockford Fosgate R2-250X1 Prime Series mono subwoofer amplifier 250-Watt Monoblock Amplifier Rockford Fosgate's R2 amplifiers are the building blocks for great audio systems, powerful enough even to DRIVE our Punch speakers and subwoofers. They have undergone an amazing upgrade by packing them with the latest features at incredible value. Best of all, they are designed and engineered here in Tempe, Arizona. Primed for performance, the R2-250X1 is a 250-watt, class-D amplifier capable of operating at 4Ω or 2Ω mono. This amplifier is extremely efficient because of its class-D technology, which reduces demand on the vehicle's electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. Perfect for subwoofers, a variable infrasonic filter, and remote level control allows you to tune the bass for the desired level of the music. General Features: Rockford Fosgate Prime R2-250X1 Class-D Full-Range Monoblock Amplifier 320 watts x 1 channel @ 4 Ohms RMS Power 600 watts x 2 channel @ 2 Ohms RMS Power Total power output: 250 watts Balanced Differential Inputs with RCA Pass Through Outputs High-Level Input Capable Defeat able Auto Turn-On Circuit Features C.L.E.A.N. Set-up Variable Input Gain adjustment level R.L.C. Remote Level Control Variable Infrasonic Filter Continuously Variable On Board Punch EQ Top Mounted Control Panel Short Circuit & Over Current Protection CEA-2006 Compliant & CE Compliant Full-Range, Class D Rollback Protection Input Sensitivity: Low-Level: 150 mV - 4 V High-Level: 450 mV - 12 V Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers Frequency Response: 20 Hz - 250 Hz Total Harmonic Distortion (THD): >1% Crossover Controls: Low-Pass: 50 Hz - 250 Hz Sub Infrasonic: 15 Hz - 40 Hz Recommended Fuse Rating: 50A Dimensions: "1.9" x "6.8" x "8.1" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2S-1X12 package: R2S-1X12 owner's manual Sealed enclosure loaded with one 12" woofer 2 Mounting brackets Four 3/4" Self-tapping screws Installation and operation instructions ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate Punch P1000X5 5-channel car amplifier — 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 1 ohm The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer. The P1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels, and run subwoofer(s) off the 5th channel! Known worldwide for brute power, this amplifier offers a higher level of efficiency along with tri-stage protection that covers thermal, over-current, and short circuits. General Features: 5-channel car amplifier 75 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms 125 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 250 watts RMS x 2 bridged at 4 ohms + 500 watts RMS at 1 ohm CEA-2006 compliant variable high- and low-pass filters (50-250 Hz, 12 dB/octave) variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz) switchable subsonic filter (28 Hz, 12 dB/octave) on subwoofer channel L.E.A.N. gain setup system includes test tone CD test tones are also available as MP3 download from Amazon on Demand, Rhapsody, Google Play, and Spotify, labeled "3sixty.3 setup disc" (Punch amps and the 3sixty.3 use the same test tone tracks for setup) Class-BD amplifier design frequency response: 20-20K Hz Dynamic Thermal Management and MEHSA MOSFET cooling systems MOSFET power and output stages preamp and speaker-level inputs (speaker-level inputs require a speaker wire to RCA adapter) signal-sensing turn-on with speaker-level inputs eliminate the need for remote turn-on lead optional PLC2 wired remote level control with clip light available 4-gauge power and ground leads and a 150-amp fuse recommended — wiring and hardware not included with amplifier no onboard fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended. 15-1/8"W x 2-7/16"H x 8-13/16"D What is in the box: 5-Channel amplifier Four 1-1/2" Self-tapping screws 5mm Allen wrench Quick setup instructions Certificate of Performance Setup/Manual disc Rockford Fosgate Punch P1000X5 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Rockford Fosgate M2-500X1 Monoblock Marine Amplifier with Absolute KIT4 4 Gauge Amp Kit Rockford Fosgate M2-500X1 500 Watt Monoblock marine amplifierDesigned to withstand the elements, the M2-500X1 Element Ready™ amplifier is a 500 watt, class-D model, capable of operating at 4Ω or 2Ω mono. This amplifier is extremely efficient because of its class D technology which reduces demand on the electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. For subwoofers, a variable infrasonic filter and remote level control allow you to tune the bass for the desired level for the music. General Features: Element Ready™ design protects against outdoor exposure Conformal coated circuit board protects against dust and water UV stable powder-coated cast aluminum heatsink Zinc Nickel-plated Marine grade brass connection terminals C.L.E.A.N. input/output clip detection and indicator LEDs MEHSA 4 (Maximum Efficiency Heat Sink Application) NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances. Optimized using AudioGraph PowerCube measurement tool Continuously Variable On Board Punch EQ Includes RLC Remote Level Control Focused mass heatsink design Top Mounted Control Panel Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers Short Circuit & Over Current Protection Variable Infrasonic Filter Integrated Power and Speaker Terminals Balanced Differential Inputs via Speaker Line or RCA Inputs RCA pass-thru outputs Integration with OEM and Aftermarket Radios "Auto-Sense" turn-on with remote out (high level in) Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power) Low Impedance Stability Proprietary testing using RATS (Rockford Automated Testing System) CEA-2006 Compliant & CE Compliant Rollback Protection Power Ratings: 300 Watts x 1 @ 4 ohms Power Ratings: 500 Watts x 1 @ 2 ohms Dynamic Power Ratings: 350 Watts x 1 @ 4 ohms Dynamic Power Ratings: 590 Watts x 1 @ 2 ohms Frequency Response: 20 Hz - 250 Hz Low-Level Input Sensitivity: 150 mV - 4 V High-Level Input Sensitivity: 450 mV - 12 V Total Harmonic Distortion (THD+Noise): <1.0% Low-Level Signal Input: 2 RCA High-Level Input Signal: 4-Pin Molex Low-Level Signal Output: 2 RCA (Pass-Thru active with RCA or Hi-Level input) Tone-Controls: 0 to +18 dB @ 45 Hz Low-Pass Crossover Controls: 50 Hz - 250 Hz @ 12dB/Octave Butterworth Infrasonic Crossover Controls: 15 Hz - 40 Hz @ 12dB/Octave Butterworth 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Dimensions: 1.9"W x 6.8"D x 8.5"H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate M2-500X1 Monoblock Marine Amplifier Rockford Fosgate M2-500X1 500 Watt Monoblock marine amplifierDesigned to withstand the elements, the M2-500X1 Element Ready™ amplifier is a 500 watt, class-D model, capable of operating at 4Ω or 2Ω mono. This amplifier is extremely efficient because of its class D technology which reduces demand on the electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. For subwoofers, a variable infrasonic filter and remote level control allow you to tune the bass for the desired level for the music. General Features: Element Ready™ design protects against outdoor exposure Conformal coated circuit board protects against dust and water UV stable powder-coated cast aluminum heatsink Zinc Nickel-plated Marine grade brass connection terminals C.L.E.A.N. input/output clip detection and indicator LEDs MEHSA 4 (Maximum Efficiency Heat Sink Application) NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances. Optimized using AudioGraph PowerCube measurement tool Continuously Variable On Board Punch EQ Includes RLC Remote Level Control Focused mass heatsink design Top Mounted Control Panel Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers Short Circuit & Over Current Protection Variable Infrasonic Filter Integrated Power and Speaker Terminals Balanced Differential Inputs via Speaker Line or RCA Inputs RCA pass-thru outputs Integration with OEM and Aftermarket Radios "Auto-Sense" turn-on with remote out (high level in) Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power) Low Impedance Stability Proprietary testing using RATS (Rockford Automated Testing System) CEA-2006 Compliant & CE Compliant Rollback Protection Power Ratings: 300 Watts x 1 @ 4 ohms Power Ratings: 500 Watts x 1 @ 2 ohms Dynamic Power Ratings: 350 Watts x 1 @ 4 ohms Dynamic Power Ratings: 590 Watts x 1 @ 2 ohms Frequency Response: 20 Hz - 250 Hz Low-Level Input Sensitivity: 150 mV - 4 V High-Level Input Sensitivity: 450 mV - 12 V Total Harmonic Distortion (THD+Noise): <1.0% Low-Level Signal Input: 2 RCA High-Level Input Signal: 4-Pin Molex Low-Level Signal Output: 2 RCA (Pass-Thru active with RCA or Hi-Level input) Tone-Controls: 0 to +18 dB @ 45 Hz Low-Pass Crossover Controls: 50 Hz - 250 Hz @ 12dB/Octave Butterworth Infrasonic Crossover Controls: 15 Hz - 40 Hz @ 12dB/Octave Butterworth Dimensions: 1.9"W x 6.8"D x 8.5"H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate Prime R2-1200X1 mono amplifier 1200W RMS x 1 at 1-ohm monoblock subwoofer amplifier Primed for performance, the R2-1200X1 is a 1200-watt, class-D amplifier capable of operating at 4Ω, 2Ω, or 1Ω mono. This amplifier is extremely efficient because of its class-D technology, which reduces demand on the vehicle's electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. For subwoofers, a variable infrasonic filter and remote level control allow you to tune the bass for the desired level of the music. General Features: Rockford Fosgate Prime R2-1200X1 Class-D Full Range Monoblock Amplifier RMS Power Rating: 4 ohms: 400 watts x 1 chan. 2 ohms: 800 watts x 1 chan. 1 ohm: 1200 watts x 1 chan. Balanced Differential Inputs with RCA Pass Through Outputs High-Level Input Capable Defeatable Auto Turn on Circuit Features C.L.E.A.N. Set-up Variable Input Gain adjustment level R.L.C. Remote Level Control Variable Infrasonic Filter Continuously Variable On-Board Punch EQ Top Mounted Control Panel Short Circuit & Over Current Protection CEA-2006 Compliant & CE Compliant Full Range Class D Rollback Protection Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers Input sensitivity: Low-Level: 150 mV - 4 V High-Level: 450 mV - 12 V Frequency Response: 20 Hz - 250 Hz Total Harmonic Distortion (THD): >1% Low-Pass: 50 Hz - 250 Hz @ 12dB Sub Infrasonic: 15 Hz - 40 Hz Fuse Rating: 120A 4-gauge power and ground wiring are recommended for installation. Dimensions: 1.9" x 6.8" x 11.3" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2-1200X1 package: Mono subwoofer amplifier Wired Remote Level Control module 16' Remote cable (RJ-25 connector on both ends) One 7" Speaker input harness 3mm Allen Hex key Four 3/4" Screws Two 1/2" Screws 5 Flat washers 1 Nut Installation and Operation Instructions Certificate of Performance R2-1200X1 owner’s manual ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.