00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine KTA-200M Mono Power Pack Amp with S-W12D2 12" Subwoofer and Bass Knob
$395.90
$695.95
Alpine KTA-200M Mono Power Pack Amp with S-W12D2 12" Subwoofer and Bass Knob
This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine S-W12D2 S-Series 12" Dual 2-Ohm Subwoofer.
Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier
The KTA-200M fits in the open space behind Alpine’s iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D) occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier, in a compact size, easy installation, and overall power. Both amplifiers, while designed to “stack” behind the iLX-W650, or similar 2-DIN radio, can also be used as standalone solutions in vehicles that don’t have space for a traditional amplifier. the KTA-200M produces 400 watts with Alpine’s DPP technology. During powerful, or “dynamic,” passages of music, DPP will adapt to the needs of the music by adjusting the gain of the amplifier and delivering bursts of power that match the peak demands of the music. Alongside that is the new voltage-adapting input circuit to maintain the maximum source signal level without clipping.
General Features:
Power Stack capable with the Alpine iLX-W650
compact mono subwoofer amplifier
Alpine’s Class D Amplifier Circuit with DPP
Dynamic Peak Power (DPP) technology adds a burst of power when needed
CTA-2006 compliant
100W x 1 RMS @ 4Ω, Power Outputs
200W x 1 RMS @ 2Ω, Power Outputs
400W x 1 DPP @ 4Ω, Power Outputs
Signal to Noise Ratio 85dB (ref. 1W into 4Ω)
≤0.1% THD+N (ref. 10W into 2Ω)
Single-side 22-pin connector
selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave)
preamp and speaker-level inputs
RCA inputs (selectable, Low range=0.2-4V)
Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
wiring, hardware, and fuse not included with the amplifier
Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver
Authorized Dealer
1-year Warranty
Alpine S-W12D2 S-Series 12" Subwoofer with Dual 2-Ohm Voice coils.General Features:
High Amplitude Multi-Roll Surround
High Strength Steel Frame
Perimeter venting with airflow management system
High-excursion underhung voice coil configuration
Compound radius curve extended pole geometry
Airflow-optimized dual flare pole vent
65mm voice coil with high-temp 5-layer DVC winding on aluminum former
high-grade strontium ferrite magnets
15MM Xmax
64mm Xmech
600W RMS
5-1/16" mounting depth
10-9/16" Cutout Diameter
Power handling: 250-600W RMS
Sealed Enclosure range: .55-1.0 ft^3
Vented Enclosure Range: 1.0-1.5 ft^3
Vented tuning range: 32-37Hz
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-W12D2 RUX-KNOB.2 KTA-200M Mono Power Pack Amp with 12" Subwoofer and Bass Knob
$409.85
$799.95
Alpine KTA-200M Mono Power Pack Amp with Alpine S-W12D2 12" Subwoofer and Bass Knob
This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine S-W12D2 S-Series 12" Dual 2-Ohm Subwoofer, and an Alpine RUX-KNOB.2 Remote Bass Knob.
Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier
The KTA-200M fits in the open space behind Alpine’s iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D) occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier, in a compact size, easy installation, and overall power. Both amplifiers, while designed to “stack” behind the iLX-W650, or similar 2-DIN radio, can also be used as standalone solutions in vehicles that don’t have space for a traditional amplifier. the KTA-200M produces 400 watts with Alpine’s DPP technology. During powerful, or “dynamic,” passages of music, DPP will adapt to the needs of the music by adjusting the gain of the amplifier and delivering bursts of power that match the peak demands of the music. Alongside that is the new voltage-adapting input circuit to maintain the maximum source signal level without clipping.
General Features:
Power Stack capable with the Alpine iLX-W650
compact mono subwoofer amplifier
Alpine’s Class D Amplifier Circuit with DPP
Dynamic Peak Power (DPP) technology adds a burst of power when needed
CTA-2006 compliant
100W x 1 RMS @ 4Ω, Power Outputs
200W x 1 RMS @ 2Ω, Power Outputs
400W x 1 DPP @ 4Ω, Power Outputs
Signal to Noise Ratio 85dB (ref. 1W into 4Ω)
≤0.1% THD+N (ref. 10W into 2Ω)
Single-side 22-pin connector
selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave)
preamp and speaker-level inputs
RCA inputs (selectable, Low range=0.2-4V)
Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
wiring, hardware, and fuse not included with the amplifier
Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver
Authorized Dealer
1-year Warranty
Alpine S-W12D2 S-Series 12" Subwoofer with Dual 2-Ohm Voice coils.General Features:
High Amplitude Multi-Roll Surround
High Strength Steel Frame
Perimeter venting with an airflow management system
High-excursion underhung voice coil configuration
Compound radius curve extended pole geometry
Airflow-optimized dual flare pole vent
65mm voice coil with high-temp 5-layer DVC winding on aluminum former
high-grade strontium ferrite magnets
15MM Xmax
64mm Xmech
600W RMS
5-1/16" mounting depth
10-9/16" Cutout Diameter
Power handling: 250-600W RMS
Sealed Enclosure range: .55-1.0 ft^3
Vented Enclosure Range: 1.0-1.5 ft^3
Vented tuning range: 32-37Hz
Alpine RUX-KNOB.2 Remote Bass KnobWith the RUX-KNOB, get full control over your PDX-M6 or PDX-M12 amplifier, conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-W10D2 RUX-KNOB.2 KTA-200M Mono Power Pack Class-D Amp with S-W10D2 10" Subwoofer and RUX-KNOB.2 Bass Knob
$409.85
$799.99
Alpine KTA-200M Mono Power Pack Amp with Alpine S-W10D2 10" Subwoofer and Bass Knob
This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine S-W10D2 S-Series 10" Dual 2-Ohm Subwoofer, and an Alpine RUX-KNOB.2 Remote Bass Knob.
Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier
General Features:
Power Stack capable with the Alpine iLX-W650
compact mono subwoofer amplifier
Alpine’s Class D Amplifier Circuit with DPP
Dynamic Peak Power (DPP) technology adds a burst of power when needed
CTA-2006 compliant
100W x 1 RMS @ 4Ω, Power Outputs
200W x 1 RMS @ 2Ω, Power Outputs
400W x 1 DPP @ 4Ω, Power Outputs
Signal to Noise Ratio 85dB (ref. 1W into 4Ω)
≤0.1% THD+N (ref. 10W into 2Ω)
Single-side 22-pin connector
selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave)
preamp and speaker-level inputs
RCA inputs (selectable, Low range=0.2-4V)
Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
wiring, hardware, and fuse not included with the amplifier
Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver
Authorized Dealer
1-year Warranty
Alpine S-W10D2 S-Series 10" Subwoofer with Dual 2-Ohm Voice Coils.
General Features:
10" 2 ohm S-Series (Type-S) Subwoofer
RMS Power Handling: 600 watts
Peak Power Handling: 1800 watts
Recommended power range: 250- 600W RMS
Pulp/Kevlar Cone
High Amplitude Multi-Roll (HAMR) Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Optimized Dual Flare Pole Vent
High Strength Steel Frame Basket
8 AWG Push Terminals with VC Configuration Jumpers
Dual Voice Coil
High-Grade Strontium Ferrite Magnets
Top-mount depth: 4-11/16"
Cutout diameter: 8-13/16
Frequency Response: 26- 200Hz
Sensitivity: 86.4dB
Resonance Frequency (Fs): 33 Hz
Authorized Dealer
1-year Manufacturer's Warranty
Alpine RUX-KNOB.2 Remote Bass KnobWith the RUX-KNOB, get full control over your amplifier conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine ILX-W670 7" Shallow-Chassis Multimedia Receiver with Jeep Wrangler 03-06 Dash Kit, Wiring Harness and Antenna Adapter
$379.99
$999.99
Alpine ILX-W670 7" Shallow-Chassis Multimedia Receiver with Jeep Wrangler 03-06 Dash Kit, Wiring Harness, and Antenna Adapter
Jeep Wrangler 03-06 Dash Kit, Wiring Harness and Antenna Adapter with Alpine ILX-W670 7" Shallow-Chassis Multimedia Receiver - This bundle includes an Alpine iLX-W670 Digital Multimedia Receiver with CarPlay and Android Auto Compatibility, a Metra 95-6541 Dash Kit Compatible with Jeep Wrangler 2003-2006, a Metra 70-6502 Wiring Harness Compatible with Chrysler 2002-2009, a Metra 40-CR10 Antenna Adapter Cable Compatible with Chrysler/Dodge/Ford/GM/Jeep 20002 and Up, a pry kit.Alpine iLX-W670 Digital Multimedia Receiver with CarPlay and Android Auto Compatibility
General Features:
digital media receiver with AM/FM tuner (does not play CDs)
shallow-mount chassis design (2-7/16" deep)
designed to pair with Alpine's KTA-450 power pack amplifier
touchscreen swipe controls
designed to work with CarPlay and Android Auto
hands-free control lets you access apps using your voice
built-in Bluetooth connectivity
enjoy music apps like Pandora and Spotify
built-in amplifier (18 watts RMS CEA-2006/50 peak x 4 channels)
USB port accommodates various devices and thumb drives
FLAC Compatible
7" capacitive touchscreen
Smartphone Features:
designed to work with CarPlay and Android Auto
built-in iPod, iPhone, and iPad control
Android control through USB
Metra 95-6541 Dash Kit Compatible with Jeep Wrangler 2003-2006
ISO DDIN radio provision
Painted black to match the factory dash panel
Wiring & Antenna Connections
Metra 70-6502
Wiring Harness Compatible with Chrysler 2002-2009
Plugs into Car Harness at radio
Power 4 Speakers
Metra 40-CR10
Antenna Adapter Cable Compatible with Chrysler/Dodge/Ford/GM/Jeep 20002 and Up
Chrysler factory antenna adapter
Snap-lock to aftermarket radio
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine W10S4 10-inch Single 4 Ohm Subwoofer Bundle
$199.95
$250.00
2 Alpine W10S4 10" Bass Subwoofer 750W Max (250W RMS) 10" BassLine Series Single 4 ohm Car Subwoofer
Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.The surround and wattage match made in heaven.The 250 watts of continuous power that the W10S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features:
10" Single 4-ohm BassLine (Bass) Series Subwoofer
Power Handling:
Peak: 750 watts
RMS: 250 watts
Recommended power range: 50W - 250W RMS
Polypropylene-Mica cone
High-excursion poly-foam surround
Progressive Wavelet Ribs (P.W.R.) cone design
An optional Alpine KTE-10PG subwoofer grill is available and is a wonderful complement to the trim ring with the Alpine logo
High-strength custom steel frame
8AWG push terminals
2" voice coil
52oz. magnet
Top-mount depth: 5-1/16"
Cutout diameter: 9"
Frequency Response: 24 - 200Hz
Sensitivity: 86.6dB
Resonance Frequency (Fs): 32
Authorized Dealer
1-year Manufacturer's Warranty
What's in the W10S4 package:
W10S4 owner's manual
One 10" Subwoofer per box
Adhesive-backed foam gasket
Application Guide
Online product registration information
Warranty Information
Important Notice!
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Mono and KTA-30FW 4-Channel Weather Resistant Amplifiers
$1,199.85
$1,500.00
Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Mono and KTA-30FW 4-Channel Weather-Resistant Amplifiers
Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Mono and KTA-30FW 4-Channel Weather-Resistant Amplifiers - This bundle includes an Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms, an Alpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack Amplifier, a pry kit, and an Alpine cozy.Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2 Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch DAlpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-OhmsSpecifications: Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.) Weather resistant (IP66 rating) 300W x 1 D.P.P. (2, 14.4V, 1% THD+N) CTA-2006-B Specifications: 200W RMS x 1 (4, 14.4V, 1% THD+N) 82dB S/N (ref. 1W into 4) >0.05% THD OEM-grade Tyco 26-pin connector with pigtail wire harness Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)Sound control: Crossovers: Off/HP/LP, Fc=50-400Hz @ -12dB/Oct. (variable) Input gain settings (variable) 2ch inputAlpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack AmplifierSpecifications: Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.) Weather resistant (IP66 rating) 150W x 4 D.P.P. (2/4, 14.4V, 1% THD+N) CTA-2006-B Specifications: 75W RMS x 4 (2/4, 14.4V, 1% THD+N) 82dB S/N (ref. 1W into 4) >0.05% THD OEM-grade Tyco 26-pin connector with pigtail wire harness Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine KTA-200M Mono Power Pack Amp with Alpine W12S4 12" Subwoofer
$319.99
$649.80
Alpine KTA-200M Mono Power Pack Amp with Alpine W12S4 12" Subwoofer
Alpine KTA-200M Mono Power Pack Amp with Alpine W12S4 12" Subwoofer and Bass Knob - This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine W12S4 12-inch Single 4 Ohm Subwoofer, a pry kit, and an Alpine cozy.Alpine KTA-200M Mono 400-Watt Power Pack AmplifierThe KTA-200M fits in the open space behind Alpines iLX-W650 7-inch Mech-Less (no CD/ DVD) Audio/Video receiver to create Alpines unique PowerStack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D) occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space.
CTA-2006
PowerStack capable with the Alpine iLX-W650
Alpines Class D Amplifier Circuit w/ Dynamic Peak Power (DPP)
100W x 1 RMS (4, 14.4V, 1% THD+N)
200W x 1 RMS (2, 14.4V, 1% THD+N)
400W x 1 DPP (2, 14.4V, 1% THD+N)
>85dB S/N (ref. 1W into 4)
0.1% THD+N (ref. 10W into 2)
Single-side 22-pin connector
RCA inputs (selectable, Low range=0.2-4V)
Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
Alpine W12S4 12-inch Single 4 Ohm SubwooferOverview:
12-inch single 4 subwoofer
250W RMS
750W peak power handling
Frequency Response: 32Hz-200Hz
5-5/16-inch mounting depth
Recommended Sealed box volume: 1.09 cu. Ft.
Recommended Ported box volume: 1.91 cu. ft
Performance: Efficiency & Tight Bass
An optimized magnet circuit allows more focused magnetism in the gap which results in improved efficiency. This means tighter bass control and more output!
What's in the W12S4 package:
One 12" Subwoofer
Adhesive-backed foam gasket
Application Guide
Online product registration information
Warranty information
Important Notice!
W12S4 owner's manual
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine Type-S Speaker and Amp Bundle 6.5" S-S65C Component Set S-S65 Coaxials with S-A32F Amplifier
$469.85
$650.00
Alpine Type-S Speaker and Amp Bundle 6.5" S-S65C Component Set S-S65 Coaxials with S-A32F Amplifier & Absolue KIT4
This bundle includes an Alpine S-32F Amplifier, a pair of Alpine S-S65C S-Series 6.5-inch Component 2-Way Speakers, a pair of Alpine S-S65 S-Series 6.5-inch Coaxial 2-Way Speakers & a wiring kit.
Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier
The all-new S-Series amplifiers pack a punch with even more performance and value. Experience hard-hitting bass and long hours of limitless play with the S-A32F 4-channel amplifier.
These amplifiers offer great value with over 20% more power through increased watt handling. The exceptional strength and resistance are supported by optimizing a heat thermal management processor to ensure exceptional reliability. You can enjoy your music with the bass cranked up for hours without any power shutdown.General Features:
Alpine S-Series S-A32F 4/3/2 Channel Power Amplifier
S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.
S-Series Amplifier: Known for reliable performance and value-oriented products.
Power Output:
55W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N)
80W RMS x 4 (2ohm, 14.4V≤ 1% THD+N)
Bridged: 160W RMS x 2 (4ohm, 14.4V ≤ 1% THD+N)
Total power output: 320 watts
CEA-2006 Compliant Amplifier
LED Power/Protect Light
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and short speaker protection)
Frequency Response: 10 - 30,0000 Hz
Total Harmonic Distortion (THD): <1%
Signal Noise Ratio: 83 dB
Variable high-pass filter: 50 - 400 Hz, 12 dB/octave
Variable low-pass filter: 50 - 400 Hz, 12 dB/octave
Fuse Rating: 40
Improved heat sink and protection circuit design
Contain technology currently implemented in the Alpine R and X-Series models
105dB Signal-to-Noise (S/N) ratio at rated power
46 degrees of phase shift
Designed to perform perfectly with the existing S-Series speakers and subwoofers
Dimensions: 8” W x 8” H x 2.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S-A32F package:
S-A32F owner's manual
4-Channel amplifier
One 40-amp ATO fuse
Four 3/4" Screws
2mm Allen wrench
Alpine Verification Certificate
Warranty information
Online product registration information
Alpine S-S65C & S-S65 6.5" SpeakersThe new cosmetics of the S-Series look good in nearly any car, and their shallow mounting design allows for easy installation in a wide range of door panels. As well, their high-efficiency design can run off of the power from the factory or Alpine head unit, resulting in an easy system improvement for any vehicle.CEA-2031 Speaker rating: 80W maximum RMS, 240W peak power handling, nominal impedance 4Frequency response: 70Hz - 22kHz6-1/2" 2-way component & Coaxial speakerscarbon-fiber-reinforced plastic woofer cone with specialized rubber surround3/4" silk dome tweetersensitivity: 88 dBmounting diameter: 5 1/16"mounting depth: 2-5/16"grills not includedwarranty: 1 year
⚠️Warning:
This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine KTA-200M Mono Power Pack Amp with W10S4 10" Subwoofer
$289.92
$449.92
Alpine KTA-200M Mono Power Pack Amp with Alpine W10S4 10" Subwoofer
The KTA-200M fits in the open space behind Alpine’s iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D) occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier, in a compact size, easy installation, and overall power. Both amplifiers, while designed to “stack” behind the iLX-W650, or similar 2-DIN radio, can also be used as standalone solutions in vehicles that don’t have space for a traditional amplifier. the KTA-200M produces 400 watts with Alpine’s DPP technology. During powerful, or “dynamic,” passages of music, DPP will adapt to the needs of the music by adjusting the gain of the amplifier and delivering bursts of power that match the peak demands of the music. Alongside that is the new voltage-adapting input circuit to maintain the maximum source signal level without clipping.
General Features:
Power Stack capable with the Alpine iLX-W650
compact mono subwoofer amplifier
Alpine’s Class D Amplifier Circuit with DPP
Dynamic Peak Power (DPP) technology adds a burst of power when needed
CTA-2006 compliant
100W x 1 RMS @ 4Ω, Power Outputs
200W x 1 RMS @ 2Ω, Power Outputs
400W x 1 DPP @ 4Ω, Power Outputs
Signal to Noise Ratio 85dB (ref. 1W into 4Ω)
≤0.1% THD+N (ref. 10W into 2Ω)
Single-side 22-pin connector
selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave)
preamp and speaker-level inputs
RCA inputs (selectable, Low range=0.2-4V)
Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
wiring, hardware, and fuse not included with amplifier
Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver
Authorized Dealer
1-year Warranty
Alpine W10S4 10" Bass Subwoofer 750W Max (250W RMS) 10" BassLine Series Single 4-ohm Car Subwoofer
Legendary Alpine quality at an affordable price
Car audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that will not break the bank.
Surround and wattage match made in heaven
The 250 watts of continuous power that the W10S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.
General Features:
10" Single 4-ohm BassLine (Bass) Series Subwoofer
Power Handling:
Peak: 750 watts
RMS: 250 watts
Recommended power range: 50W - 250W RMS
Polypropylene-Mica cone
High-excursion poly-foam surround
Progressive Wavelet Ribs (P.W.R.) cone design
Optional Alpine KTE-10PG subwoofer grill is available and is a wonderful complement to the trim ring with the Alpine logo
High-strength custom steel frame
8AWG push terminals
2" voice coil
52oz. magnet
Top-mount depth: 5-1/16"
Cutout diameter: 9"
Frequency Response: 24 - 200Hz
Sensitivity: 86.6dB
Resonance Frequency (Fs): 32
Authorized Dealer
1-year Manufacturer's Warranty
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather resistant Amplifier
$739.90
$900.00
Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier
Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier - This bundle includes an Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms, a pry kit, and an Alpine cozy.Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer EnclosureAlpine Electronics of America, Inc. introduced a new sound system lineup for the Halo category that includes a 10-inch enclosure and remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers.This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single box design but have a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure.Enclosure Stacking FeaturesUnique to Alpine, the subwoofer 10-inch is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features:
S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure
Includes S-W10D4 wired in parallel
600W RMS power handling
2Ω Impedance Ported enclosure design
Frequency response: 28-200 Hz
Vented enclosure tuning frequency: 36 Hz
Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D
What is in the S-SB10V box:
Ported enclosure loaded with one S-W10D4 subwoofer driver
Rubber flange protector (installed on the subwoofer)
Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms
The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.
General Features:
Alpine KTA-30MW
Class D Monoblock Weather Resistant Power Pack Amplifier
300 Watts RMS X 1 @ 4 Ohms Power Handling
600 Watts RMS X 1 @ 2 Ohms Power Handling
CTA-2006 compliant
Frequency Response: 20-400 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 83dB
Variable Low Pass filter 50-400Hz @ -24dB/Oct.
Variable Bass Boost (0-12 dB at 50 Hz)
Fuse Rating: 25A
Weather-resistant (IP66 rating)
Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs
Dimensions: 7” W x 3.5” H x 1.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the KTA-30MW box:
Mono amplifier
14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends)
4 Self-tapping screws (Length 3/4")
Connection sheet
Limited Warranty sheet
KTA-30MW owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-200M Power Stack Amplifier
$599.90
Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-200M Amplifier
Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-200M Amplifier - This bundle includes an Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure, an Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier
Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer EnclosureAlpine Electronics of America, Inc. introduced a new sound system lineup for the Halo category that includes a 10-inch enclosure and remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers.This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single box design but have a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure.Enclosure Stacking FeaturesUnique to Alpine, the subwoofer 10-inch is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features:
S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure
Includes S-W10D4 wired in parallel
600W RMS power handling
2Ω Impedance Ported enclosure design
Frequency response: 28-200 Hz
Vented enclosure tuning frequency: 36 Hz
Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D
What is in the S-SB10V box:
Ported enclosure loaded with one S-W10D4 subwoofer driver
Rubber flange protector (installed on the subwoofer)
Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier
The KTA-200M fits in the open space behind Alpine’s iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D) occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier, in a compact size, easy installation, and overall power. Both amplifiers, while designed to “stack” behind the iLX-W650, or similar 2-DIN radio, can also be used as standalone solutions in vehicles that don’t have space for a traditional amplifier. the KTA-200M produces 400 watts with Alpine’s DPP technology. During powerful, or “dynamic,” passages of music, DPP will adapt to the needs of the music by adjusting the gain of the amplifier and delivering bursts of power that match the peak demands of the music. Alongside that is the new voltage adapting input circuit to maintain the maximum source signal level without clipping.
General Features:
Power Stack capable with the Alpine iLX-W650
compact mono subwoofer amplifier
Alpine’s Class D Amplifier Circuit with DPP
Dynamic Peak Power (DPP) technology adds a burst of power when needed
CTA-2006 compliant
100W x 1 RMS @ 4Ω, Power Outputs
200W x 1 RMS @ 2Ω, Power Outputs
400W x 1 DPP @ 4Ω, Power Outputs
Signal to Noise Ratio 85dB (ref. 1W into 4Ω)
≤0.1% THD+N (ref. 10W into 2Ω)
Single-side 22-pin connector
selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave)
preamp and speaker-level inputs
RCA inputs (selectable, Low range=0.2-4V)
Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
wiring, hardware, and fuse not included with amplifier
Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver
Authorized Dealer
1-year Warranty
What is in the KTA-200M box:
Mono amplifier
12" Input/Output/Power harness
1 Head unit (iLX-W650) mounting bracket
2 Universal mounting brackets
Four M5x6mm Allen head machine screws (3mm)
Two M2.6x8mm Machine screws
Four 3/8" Screws
Four 8" Zip Ties
Owner's Manual (English/ French/ Spanish)
Warranty information
Online product registration information
FCC Compliance Statement
KTA-200M Owner's Manual
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-SB12V & KTA-30MW Bundle 12" Vented Loaded Halo Enclosure with Weather resistant Amplifier and Amp Wire Kit
$827.90
$899.99
Alpine S-SB12V 12" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier
Alpine S-SB12V Pre-Loaded S-Series 12-inch Subwoofer Enclosure Unique to Alpine, the subwoofer 12-inch enclosures are available as a single or linked format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system. The optional mounting bracket (sold separately) KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look.
General Features:
Includes S-W12D4 wired in parallel
600W RMS power handling
2Ω Impedance
Ported enclosure design
Frequency response: 26-200 Hz
Vented enclosure tuning frequency: 35 Hz
Dimensions 17-inch W x 14.625-inch H X 15-inch D
Authorized Internet Dealer
Alpine KTA-30MW Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier
Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags. Product Details
Class D Monoblock Weather Resistant Power Pack Amplifier
Power Handling
300W RMS x 1 @ 2/4 Ohms
600W Peak x 1 @ 2/4 Ohms
CTA-2006 compliant
Frequency Response: 20-400 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 83dB
Variable Low Pass filter 50-400Hz @ -24dB/Oct.
Variable Bass Boost (0-12 dB at 50 Hz)
Fuse Rating: 25A
Weather-resistant (IP66 rating)
Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs
Dimensions: 7” W x 3.5” H x 1.25” D
1-year Manufacturer's Warranty
Absolute KIT 4 Wiring Kit
General Features:
Complete 4 Gauge Amplifier Kit
Designed specifically for car audio systems up to 1000 watts
Premium power and ground wire provide optimal power transfer
Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
Terminals are gold-plated for excellent signal transfer
For use in any car, truck, RV, or boat
Authorized Internet Dealer
1-year Manufacturer's warranty
Package Includes:
17 ft. of red 4 AWG high current power cable
3 ft. of black 4 AWG ground cable
15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire
20 ft. of 12 AWG OFC Speaker cable
20 ft. of 16 AWG remote turn-on wire
6 ft. of split loom tubing
1 Gold plated 80 AMP AGU fuse
1 4 AWG gold ring terminal
1 4 AWG water-resistant inline fuse holder
2 Ring terminals
2 Spade terminals (4 gauge)
5 Spade terminals (14-16 gauge)
3 Self-tapping screws
1 Rubber grommet
20 Black cable ties
2 Butt connectors (18-22 gauge)
1 Butt connector (4 gauge)
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov